Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1621 insertions, 0 deletions

diff --git a/drivers/iio/light/gp2ap020a00f.c b/drivers/iio/light/gp2ap020a00f.c
new file mode 100644
index 000000000..a5bf9da0d
--- /dev/null
+++ b/drivers/iio/light/gp2ap020a00f.c
@@ -0,0 +1,1621 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Jacek Anaszewski <j.anaszewski@samsung.com>
+ *
+ * IIO features supported by the driver:
+ *
+ * Read-only raw channels:
+ *   - illuminance_clear [lux]
+ *   - illuminance_ir
+ *   - proximity
+ *
+ * Triggered buffer:
+ *   - illuminance_clear
+ *   - illuminance_ir
+ *   - proximity
+ *
+ * Events:
+ *   - illuminance_clear (rising and falling)
+ *   - proximity (rising and falling)
+ *     - both falling and rising thresholds for the proximity events
+ *       must be set to the values greater than 0.
+ *
+ * The driver supports triggered buffers for all the three
+ * channels as well as high and low threshold events for the
+ * illuminance_clear and proxmimity channels. Triggers
+ * can be enabled simultaneously with both illuminance_clear
+ * events. Proximity events cannot be enabled simultaneously
+ * with any triggers or illuminance events. Enabling/disabling
+ * one of the proximity events automatically enables/disables
+ * the other one.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irq_work.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <asm/unaligned.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define GP2A_I2C_NAME "gp2ap020a00f"
+
+/* Registers */
+#define GP2AP020A00F_OP_REG	0x00 /* Basic operations */
+#define GP2AP020A00F_ALS_REG	0x01 /* ALS related settings */
+#define GP2AP020A00F_PS_REG	0x02 /* PS related settings */
+#define GP2AP020A00F_LED_REG	0x03 /* LED reg */
+#define GP2AP020A00F_TL_L_REG	0x04 /* ALS: Threshold low LSB */
+#define GP2AP020A00F_TL_H_REG	0x05 /* ALS: Threshold low MSB */
+#define GP2AP020A00F_TH_L_REG	0x06 /* ALS: Threshold high LSB */
+#define GP2AP020A00F_TH_H_REG	0x07 /* ALS: Threshold high MSB */
+#define GP2AP020A00F_PL_L_REG	0x08 /* PS: Threshold low LSB */
+#define GP2AP020A00F_PL_H_REG	0x09 /* PS: Threshold low MSB */
+#define GP2AP020A00F_PH_L_REG	0x0a /* PS: Threshold high LSB */
+#define GP2AP020A00F_PH_H_REG	0x0b /* PS: Threshold high MSB */
+#define GP2AP020A00F_D0_L_REG	0x0c /* ALS result: Clear/Illuminance LSB */
+#define GP2AP020A00F_D0_H_REG	0x0d /* ALS result: Clear/Illuminance MSB */
+#define GP2AP020A00F_D1_L_REG	0x0e /* ALS result: IR LSB */
+#define GP2AP020A00F_D1_H_REG	0x0f /* ALS result: IR LSB */
+#define GP2AP020A00F_D2_L_REG	0x10 /* PS result LSB */
+#define GP2AP020A00F_D2_H_REG	0x11 /* PS result MSB */
+#define GP2AP020A00F_NUM_REGS	0x12 /* Number of registers */
+
+/* OP_REG bits */
+#define GP2AP020A00F_OP3_MASK		0x80 /* Software shutdown */
+#define GP2AP020A00F_OP3_SHUTDOWN	0x00
+#define GP2AP020A00F_OP3_OPERATION	0x80
+#define GP2AP020A00F_OP2_MASK		0x40 /* Auto shutdown/Continuous mode */
+#define GP2AP020A00F_OP2_AUTO_SHUTDOWN	0x00
+#define GP2AP020A00F_OP2_CONT_OPERATION	0x40
+#define GP2AP020A00F_OP_MASK		0x30 /* Operating mode selection  */
+#define GP2AP020A00F_OP_ALS_AND_PS	0x00
+#define GP2AP020A00F_OP_ALS		0x10
+#define GP2AP020A00F_OP_PS		0x20
+#define GP2AP020A00F_OP_DEBUG		0x30
+#define GP2AP020A00F_PROX_MASK		0x08 /* PS: detection/non-detection */
+#define GP2AP020A00F_PROX_NON_DETECT	0x00
+#define GP2AP020A00F_PROX_DETECT	0x08
+#define GP2AP020A00F_FLAG_P		0x04 /* PS: interrupt result  */
+#define GP2AP020A00F_FLAG_A		0x02 /* ALS: interrupt result  */
+#define GP2AP020A00F_TYPE_MASK		0x01 /* Output data type selection */
+#define GP2AP020A00F_TYPE_MANUAL_CALC	0x00
+#define GP2AP020A00F_TYPE_AUTO_CALC	0x01
+
+/* ALS_REG bits */
+#define GP2AP020A00F_PRST_MASK		0xc0 /* Number of measurement cycles */
+#define GP2AP020A00F_PRST_ONCE		0x00
+#define GP2AP020A00F_PRST_4_CYCLES	0x40
+#define GP2AP020A00F_PRST_8_CYCLES	0x80
+#define GP2AP020A00F_PRST_16_CYCLES	0xc0
+#define GP2AP020A00F_RES_A_MASK		0x38 /* ALS: Resolution */
+#define GP2AP020A00F_RES_A_800ms	0x00
+#define GP2AP020A00F_RES_A_400ms	0x08
+#define GP2AP020A00F_RES_A_200ms	0x10
+#define GP2AP020A00F_RES_A_100ms	0x18
+#define GP2AP020A00F_RES_A_25ms		0x20
+#define GP2AP020A00F_RES_A_6_25ms	0x28
+#define GP2AP020A00F_RES_A_1_56ms	0x30
+#define GP2AP020A00F_RES_A_0_39ms	0x38
+#define GP2AP020A00F_RANGE_A_MASK	0x07 /* ALS: Max measurable range */
+#define GP2AP020A00F_RANGE_A_x1		0x00
+#define GP2AP020A00F_RANGE_A_x2		0x01
+#define GP2AP020A00F_RANGE_A_x4		0x02
+#define GP2AP020A00F_RANGE_A_x8		0x03
+#define GP2AP020A00F_RANGE_A_x16	0x04
+#define GP2AP020A00F_RANGE_A_x32	0x05
+#define GP2AP020A00F_RANGE_A_x64	0x06
+#define GP2AP020A00F_RANGE_A_x128	0x07
+
+/* PS_REG bits */
+#define GP2AP020A00F_ALC_MASK		0x80 /* Auto light cancel */
+#define GP2AP020A00F_ALC_ON		0x80
+#define GP2AP020A00F_ALC_OFF		0x00
+#define GP2AP020A00F_INTTYPE_MASK	0x40 /* Interrupt type setting */
+#define GP2AP020A00F_INTTYPE_LEVEL	0x00
+#define GP2AP020A00F_INTTYPE_PULSE	0x40
+#define GP2AP020A00F_RES_P_MASK		0x38 /* PS: Resolution */
+#define GP2AP020A00F_RES_P_800ms_x2	0x00
+#define GP2AP020A00F_RES_P_400ms_x2	0x08
+#define GP2AP020A00F_RES_P_200ms_x2	0x10
+#define GP2AP020A00F_RES_P_100ms_x2	0x18
+#define GP2AP020A00F_RES_P_25ms_x2	0x20
+#define GP2AP020A00F_RES_P_6_25ms_x2	0x28
+#define GP2AP020A00F_RES_P_1_56ms_x2	0x30
+#define GP2AP020A00F_RES_P_0_39ms_x2	0x38
+#define GP2AP020A00F_RANGE_P_MASK	0x07 /* PS: Max measurable range */
+#define GP2AP020A00F_RANGE_P_x1		0x00
+#define GP2AP020A00F_RANGE_P_x2		0x01
+#define GP2AP020A00F_RANGE_P_x4		0x02
+#define GP2AP020A00F_RANGE_P_x8		0x03
+#define GP2AP020A00F_RANGE_P_x16	0x04
+#define GP2AP020A00F_RANGE_P_x32	0x05
+#define GP2AP020A00F_RANGE_P_x64	0x06
+#define GP2AP020A00F_RANGE_P_x128	0x07
+
+/* LED reg bits */
+#define GP2AP020A00F_INTVAL_MASK	0xc0 /* Intermittent operating */
+#define GP2AP020A00F_INTVAL_0		0x00
+#define GP2AP020A00F_INTVAL_4		0x40
+#define GP2AP020A00F_INTVAL_8		0x80
+#define GP2AP020A00F_INTVAL_16		0xc0
+#define GP2AP020A00F_IS_MASK		0x30 /* ILED drive peak current */
+#define GP2AP020A00F_IS_13_8mA		0x00
+#define GP2AP020A00F_IS_27_5mA		0x10
+#define GP2AP020A00F_IS_55mA		0x20
+#define GP2AP020A00F_IS_110mA		0x30
+#define GP2AP020A00F_PIN_MASK		0x0c /* INT terminal setting */
+#define GP2AP020A00F_PIN_ALS_OR_PS	0x00
+#define GP2AP020A00F_PIN_ALS		0x04
+#define GP2AP020A00F_PIN_PS		0x08
+#define GP2AP020A00F_PIN_PS_DETECT	0x0c
+#define GP2AP020A00F_FREQ_MASK		0x02 /* LED modulation frequency */
+#define GP2AP020A00F_FREQ_327_5kHz	0x00
+#define GP2AP020A00F_FREQ_81_8kHz	0x02
+#define GP2AP020A00F_RST		0x01 /* Software reset */
+
+#define GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR	0
+#define GP2AP020A00F_SCAN_MODE_LIGHT_IR		1
+#define GP2AP020A00F_SCAN_MODE_PROXIMITY	2
+#define GP2AP020A00F_CHAN_TIMESTAMP		3
+
+#define GP2AP020A00F_DATA_READY_TIMEOUT		msecs_to_jiffies(1000)
+#define GP2AP020A00F_DATA_REG(chan)		(GP2AP020A00F_D0_L_REG + \
+							(chan) * 2)
+#define GP2AP020A00F_THRESH_REG(th_val_id)	(GP2AP020A00F_TL_L_REG + \
+							(th_val_id) * 2)
+#define GP2AP020A00F_THRESH_VAL_ID(reg_addr)	((reg_addr - 4) / 2)
+
+#define GP2AP020A00F_SUBTRACT_MODE	0
+#define GP2AP020A00F_ADD_MODE		1
+
+#define GP2AP020A00F_MAX_CHANNELS	3
+
+enum gp2ap020a00f_opmode {
+	GP2AP020A00F_OPMODE_READ_RAW_CLEAR,
+	GP2AP020A00F_OPMODE_READ_RAW_IR,
+	GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY,
+	GP2AP020A00F_OPMODE_ALS,
+	GP2AP020A00F_OPMODE_PS,
+	GP2AP020A00F_OPMODE_ALS_AND_PS,
+	GP2AP020A00F_OPMODE_PROX_DETECT,
+	GP2AP020A00F_OPMODE_SHUTDOWN,
+	GP2AP020A00F_NUM_OPMODES,
+};
+
+enum gp2ap020a00f_cmd {
+	GP2AP020A00F_CMD_READ_RAW_CLEAR,
+	GP2AP020A00F_CMD_READ_RAW_IR,
+	GP2AP020A00F_CMD_READ_RAW_PROXIMITY,
+	GP2AP020A00F_CMD_TRIGGER_CLEAR_EN,
+	GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS,
+	GP2AP020A00F_CMD_TRIGGER_IR_EN,
+	GP2AP020A00F_CMD_TRIGGER_IR_DIS,
+	GP2AP020A00F_CMD_TRIGGER_PROX_EN,
+	GP2AP020A00F_CMD_TRIGGER_PROX_DIS,
+	GP2AP020A00F_CMD_ALS_HIGH_EV_EN,
+	GP2AP020A00F_CMD_ALS_HIGH_EV_DIS,
+	GP2AP020A00F_CMD_ALS_LOW_EV_EN,
+	GP2AP020A00F_CMD_ALS_LOW_EV_DIS,
+	GP2AP020A00F_CMD_PROX_HIGH_EV_EN,
+	GP2AP020A00F_CMD_PROX_HIGH_EV_DIS,
+	GP2AP020A00F_CMD_PROX_LOW_EV_EN,
+	GP2AP020A00F_CMD_PROX_LOW_EV_DIS,
+};
+
+enum gp2ap020a00f_flags {
+	GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER,
+	GP2AP020A00F_FLAG_ALS_IR_TRIGGER,
+	GP2AP020A00F_FLAG_PROX_TRIGGER,
+	GP2AP020A00F_FLAG_PROX_RISING_EV,
+	GP2AP020A00F_FLAG_PROX_FALLING_EV,
+	GP2AP020A00F_FLAG_ALS_RISING_EV,
+	GP2AP020A00F_FLAG_ALS_FALLING_EV,
+	GP2AP020A00F_FLAG_LUX_MODE_HI,
+	GP2AP020A00F_FLAG_DATA_READY,
+};
+
+enum gp2ap020a00f_thresh_val_id {
+	GP2AP020A00F_THRESH_TL,
+	GP2AP020A00F_THRESH_TH,
+	GP2AP020A00F_THRESH_PL,
+	GP2AP020A00F_THRESH_PH,
+};
+
+struct gp2ap020a00f_data {
+	const struct gp2ap020a00f_platform_data *pdata;
+	struct i2c_client *client;
+	struct mutex lock;
+	char *buffer;
+	struct regulator *vled_reg;
+	unsigned long flags;
+	enum gp2ap020a00f_opmode cur_opmode;
+	struct iio_trigger *trig;
+	struct regmap *regmap;
+	unsigned int thresh_val[4];
+	u8 debug_reg_addr;
+	struct irq_work work;
+	wait_queue_head_t data_ready_queue;
+};
+
+static const u8 gp2ap020a00f_reg_init_tab[] = {
+	[GP2AP020A00F_OP_REG] = GP2AP020A00F_OP3_SHUTDOWN,
+	[GP2AP020A00F_ALS_REG] = GP2AP020A00F_RES_A_25ms |
+				 GP2AP020A00F_RANGE_A_x8,
+	[GP2AP020A00F_PS_REG] = GP2AP020A00F_ALC_ON |
+				GP2AP020A00F_RES_P_1_56ms_x2 |
+				GP2AP020A00F_RANGE_P_x4,
+	[GP2AP020A00F_LED_REG] = GP2AP020A00F_INTVAL_0 |
+				 GP2AP020A00F_IS_110mA |
+				 GP2AP020A00F_FREQ_327_5kHz,
+	[GP2AP020A00F_TL_L_REG] = 0,
+	[GP2AP020A00F_TL_H_REG] = 0,
+	[GP2AP020A00F_TH_L_REG] = 0,
+	[GP2AP020A00F_TH_H_REG] = 0,
+	[GP2AP020A00F_PL_L_REG] = 0,
+	[GP2AP020A00F_PL_H_REG] = 0,
+	[GP2AP020A00F_PH_L_REG] = 0,
+	[GP2AP020A00F_PH_H_REG] = 0,
+};
+
+static bool gp2ap020a00f_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case GP2AP020A00F_OP_REG:
+	case GP2AP020A00F_D0_L_REG:
+	case GP2AP020A00F_D0_H_REG:
+	case GP2AP020A00F_D1_L_REG:
+	case GP2AP020A00F_D1_H_REG:
+	case GP2AP020A00F_D2_L_REG:
+	case GP2AP020A00F_D2_H_REG:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config gp2ap020a00f_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = GP2AP020A00F_D2_H_REG,
+	.cache_type = REGCACHE_RBTREE,
+
+	.volatile_reg = gp2ap020a00f_is_volatile_reg,
+};
+
+static const struct gp2ap020a00f_mutable_config_regs {
+	u8 op_reg;
+	u8 als_reg;
+	u8 ps_reg;
+	u8 led_reg;
+} opmode_regs_settings[GP2AP020A00F_NUM_OPMODES] = {
+	[GP2AP020A00F_OPMODE_READ_RAW_CLEAR] = {
+		GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_CONT_OPERATION
+		| GP2AP020A00F_OP3_OPERATION
+		| GP2AP020A00F_TYPE_AUTO_CALC,
+		GP2AP020A00F_PRST_ONCE,
+		GP2AP020A00F_INTTYPE_LEVEL,
+		GP2AP020A00F_PIN_ALS
+	},
+	[GP2AP020A00F_OPMODE_READ_RAW_IR] = {
+		GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_CONT_OPERATION
+		| GP2AP020A00F_OP3_OPERATION
+		| GP2AP020A00F_TYPE_MANUAL_CALC,
+		GP2AP020A00F_PRST_ONCE,
+		GP2AP020A00F_INTTYPE_LEVEL,
+		GP2AP020A00F_PIN_ALS
+	},
+	[GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY] = {
+		GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_CONT_OPERATION
+		| GP2AP020A00F_OP3_OPERATION
+		| GP2AP020A00F_TYPE_MANUAL_CALC,
+		GP2AP020A00F_PRST_ONCE,
+		GP2AP020A00F_INTTYPE_LEVEL,
+		GP2AP020A00F_PIN_PS
+	},
+	[GP2AP020A00F_OPMODE_PROX_DETECT] = {
+		GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_CONT_OPERATION
+		| GP2AP020A00F_OP3_OPERATION
+		| GP2AP020A00F_TYPE_MANUAL_CALC,
+		GP2AP020A00F_PRST_4_CYCLES,
+		GP2AP020A00F_INTTYPE_PULSE,
+		GP2AP020A00F_PIN_PS_DETECT
+	},
+	[GP2AP020A00F_OPMODE_ALS] = {
+		GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_CONT_OPERATION
+		| GP2AP020A00F_OP3_OPERATION
+		| GP2AP020A00F_TYPE_AUTO_CALC,
+		GP2AP020A00F_PRST_ONCE,
+		GP2AP020A00F_INTTYPE_LEVEL,
+		GP2AP020A00F_PIN_ALS
+	},
+	[GP2AP020A00F_OPMODE_PS] = {
+		GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_CONT_OPERATION
+		| GP2AP020A00F_OP3_OPERATION
+		| GP2AP020A00F_TYPE_MANUAL_CALC,
+		GP2AP020A00F_PRST_4_CYCLES,
+		GP2AP020A00F_INTTYPE_LEVEL,
+		GP2AP020A00F_PIN_PS
+	},
+	[GP2AP020A00F_OPMODE_ALS_AND_PS] = {
+		GP2AP020A00F_OP_ALS_AND_PS
+		| GP2AP020A00F_OP2_CONT_OPERATION
+		| GP2AP020A00F_OP3_OPERATION
+		| GP2AP020A00F_TYPE_AUTO_CALC,
+		GP2AP020A00F_PRST_4_CYCLES,
+		GP2AP020A00F_INTTYPE_LEVEL,
+		GP2AP020A00F_PIN_ALS_OR_PS
+	},
+	[GP2AP020A00F_OPMODE_SHUTDOWN] = { GP2AP020A00F_OP3_SHUTDOWN, },
+};
+
+static int gp2ap020a00f_set_operation_mode(struct gp2ap020a00f_data *data,
+					enum gp2ap020a00f_opmode op)
+{
+	unsigned int op_reg_val;
+	int err;
+
+	if (op != GP2AP020A00F_OPMODE_SHUTDOWN) {
+		err = regmap_read(data->regmap, GP2AP020A00F_OP_REG,
+					&op_reg_val);
+		if (err < 0)
+			return err;
+		/*
+		 * Shutdown the device if the operation being executed entails
+		 * mode transition.
+		 */
+		if ((opmode_regs_settings[op].op_reg & GP2AP020A00F_OP_MASK) !=
+		    (op_reg_val & GP2AP020A00F_OP_MASK)) {
+			/* set shutdown mode */
+			err = regmap_update_bits(data->regmap,
+				GP2AP020A00F_OP_REG, GP2AP020A00F_OP3_MASK,
+				GP2AP020A00F_OP3_SHUTDOWN);
+			if (err < 0)
+				return err;
+		}
+
+		err = regmap_update_bits(data->regmap, GP2AP020A00F_ALS_REG,
+			GP2AP020A00F_PRST_MASK, opmode_regs_settings[op]
+								.als_reg);
+		if (err < 0)
+			return err;
+
+		err = regmap_update_bits(data->regmap, GP2AP020A00F_PS_REG,
+			GP2AP020A00F_INTTYPE_MASK, opmode_regs_settings[op]
+								.ps_reg);
+		if (err < 0)
+			return err;
+
+		err = regmap_update_bits(data->regmap, GP2AP020A00F_LED_REG,
+			GP2AP020A00F_PIN_MASK, opmode_regs_settings[op]
+								.led_reg);
+		if (err < 0)
+			return err;
+	}
+
+	/* Set OP_REG and apply operation mode (power on / off) */
+	err = regmap_update_bits(data->regmap,
+				 GP2AP020A00F_OP_REG,
+				 GP2AP020A00F_OP_MASK | GP2AP020A00F_OP2_MASK |
+				 GP2AP020A00F_OP3_MASK | GP2AP020A00F_TYPE_MASK,
+				 opmode_regs_settings[op].op_reg);
+	if (err < 0)
+		return err;
+
+	data->cur_opmode = op;
+
+	return 0;
+}
+
+static bool gp2ap020a00f_als_enabled(struct gp2ap020a00f_data *data)
+{
+	return test_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &data->flags) ||
+	       test_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &data->flags) ||
+	       test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags) ||
+	       test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags);
+}
+
+static bool gp2ap020a00f_prox_detect_enabled(struct gp2ap020a00f_data *data)
+{
+	return test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags) ||
+	       test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags);
+}
+
+static int gp2ap020a00f_write_event_threshold(struct gp2ap020a00f_data *data,
+				enum gp2ap020a00f_thresh_val_id th_val_id,
+				bool enable)
+{
+	__le16 thresh_buf = 0;
+	unsigned int thresh_reg_val;
+
+	if (!enable)
+		thresh_reg_val = 0;
+	else if (test_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags) &&
+		 th_val_id != GP2AP020A00F_THRESH_PL &&
+		 th_val_id != GP2AP020A00F_THRESH_PH)
+		/*
+		 * For the high lux mode ALS threshold has to be scaled down
+		 * to allow for proper comparison with the output value.
+		 */
+		thresh_reg_val = data->thresh_val[th_val_id] / 16;
+	else
+		thresh_reg_val = data->thresh_val[th_val_id] > 16000 ?
+					16000 :
+					data->thresh_val[th_val_id];
+
+	thresh_buf = cpu_to_le16(thresh_reg_val);
+
+	return regmap_bulk_write(data->regmap,
+				 GP2AP020A00F_THRESH_REG(th_val_id),
+				 (u8 *)&thresh_buf, 2);
+}
+
+static int gp2ap020a00f_alter_opmode(struct gp2ap020a00f_data *data,
+			enum gp2ap020a00f_opmode diff_mode, int add_sub)
+{
+	enum gp2ap020a00f_opmode new_mode;
+
+	if (diff_mode != GP2AP020A00F_OPMODE_ALS &&
+	    diff_mode != GP2AP020A00F_OPMODE_PS)
+		return -EINVAL;
+
+	if (add_sub == GP2AP020A00F_ADD_MODE) {
+		if (data->cur_opmode == GP2AP020A00F_OPMODE_SHUTDOWN)
+			new_mode =  diff_mode;
+		else
+			new_mode = GP2AP020A00F_OPMODE_ALS_AND_PS;
+	} else {
+		if (data->cur_opmode == GP2AP020A00F_OPMODE_ALS_AND_PS)
+			new_mode = (diff_mode == GP2AP020A00F_OPMODE_ALS) ?
+					GP2AP020A00F_OPMODE_PS :
+					GP2AP020A00F_OPMODE_ALS;
+		else
+			new_mode = GP2AP020A00F_OPMODE_SHUTDOWN;
+	}
+
+	return gp2ap020a00f_set_operation_mode(data, new_mode);
+}
+
+static int gp2ap020a00f_exec_cmd(struct gp2ap020a00f_data *data,
+					enum gp2ap020a00f_cmd cmd)
+{
+	int err = 0;
+
+	switch (cmd) {
+	case GP2AP020A00F_CMD_READ_RAW_CLEAR:
+		if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN)
+			return -EBUSY;
+		err = gp2ap020a00f_set_operation_mode(data,
+					GP2AP020A00F_OPMODE_READ_RAW_CLEAR);
+		break;
+	case GP2AP020A00F_CMD_READ_RAW_IR:
+		if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN)
+			return -EBUSY;
+		err = gp2ap020a00f_set_operation_mode(data,
+					GP2AP020A00F_OPMODE_READ_RAW_IR);
+		break;
+	case GP2AP020A00F_CMD_READ_RAW_PROXIMITY:
+		if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN)
+			return -EBUSY;
+		err = gp2ap020a00f_set_operation_mode(data,
+					GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY);
+		break;
+	case GP2AP020A00F_CMD_TRIGGER_CLEAR_EN:
+		if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
+			return -EBUSY;
+		if (!gp2ap020a00f_als_enabled(data))
+			err = gp2ap020a00f_alter_opmode(data,
+						GP2AP020A00F_OPMODE_ALS,
+						GP2AP020A00F_ADD_MODE);
+		set_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &data->flags);
+		break;
+	case GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS:
+		clear_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &data->flags);
+		if (gp2ap020a00f_als_enabled(data))
+			break;
+		err = gp2ap020a00f_alter_opmode(data,
+						GP2AP020A00F_OPMODE_ALS,
+						GP2AP020A00F_SUBTRACT_MODE);
+		break;
+	case GP2AP020A00F_CMD_TRIGGER_IR_EN:
+		if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
+			return -EBUSY;
+		if (!gp2ap020a00f_als_enabled(data))
+			err = gp2ap020a00f_alter_opmode(data,
+						GP2AP020A00F_OPMODE_ALS,
+						GP2AP020A00F_ADD_MODE);
+		set_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &data->flags);
+		break;
+	case GP2AP020A00F_CMD_TRIGGER_IR_DIS:
+		clear_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &data->flags);
+		if (gp2ap020a00f_als_enabled(data))
+			break;
+		err = gp2ap020a00f_alter_opmode(data,
+						GP2AP020A00F_OPMODE_ALS,
+						GP2AP020A00F_SUBTRACT_MODE);
+		break;
+	case GP2AP020A00F_CMD_TRIGGER_PROX_EN:
+		if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
+			return -EBUSY;
+		err = gp2ap020a00f_alter_opmode(data,
+						GP2AP020A00F_OPMODE_PS,
+						GP2AP020A00F_ADD_MODE);
+		set_bit(GP2AP020A00F_FLAG_PROX_TRIGGER, &data->flags);
+		break;
+	case GP2AP020A00F_CMD_TRIGGER_PROX_DIS:
+		clear_bit(GP2AP020A00F_FLAG_PROX_TRIGGER, &data->flags);
+		err = gp2ap020a00f_alter_opmode(data,
+						GP2AP020A00F_OPMODE_PS,
+						GP2AP020A00F_SUBTRACT_MODE);
+		break;
+	case GP2AP020A00F_CMD_ALS_HIGH_EV_EN:
+		if (test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags))
+			return 0;
+		if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
+			return -EBUSY;
+		if (!gp2ap020a00f_als_enabled(data)) {
+			err = gp2ap020a00f_alter_opmode(data,
+						GP2AP020A00F_OPMODE_ALS,
+						GP2AP020A00F_ADD_MODE);
+			if (err < 0)
+				return err;
+		}
+		set_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags);
+		err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_TH, true);
+		break;
+	case GP2AP020A00F_CMD_ALS_HIGH_EV_DIS:
+		if (!test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags))
+			return 0;
+		clear_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags);
+		if (!gp2ap020a00f_als_enabled(data)) {
+			err = gp2ap020a00f_alter_opmode(data,
+						GP2AP020A00F_OPMODE_ALS,
+						GP2AP020A00F_SUBTRACT_MODE);
+			if (err < 0)
+				return err;
+		}
+		err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_TH, false);
+		break;
+	case GP2AP020A00F_CMD_ALS_LOW_EV_EN:
+		if (test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags))
+			return 0;
+		if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
+			return -EBUSY;
+		if (!gp2ap020a00f_als_enabled(data)) {
+			err = gp2ap020a00f_alter_opmode(data,
+						GP2AP020A00F_OPMODE_ALS,
+						GP2AP020A00F_ADD_MODE);
+			if (err < 0)
+				return err;
+		}
+		set_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags);
+		err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_TL, true);
+		break;
+	case GP2AP020A00F_CMD_ALS_LOW_EV_DIS:
+		if (!test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags))
+			return 0;
+		clear_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags);
+		if (!gp2ap020a00f_als_enabled(data)) {
+			err = gp2ap020a00f_alter_opmode(data,
+						GP2AP020A00F_OPMODE_ALS,
+						GP2AP020A00F_SUBTRACT_MODE);
+			if (err < 0)
+				return err;
+		}
+		err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_TL, false);
+		break;
+	case GP2AP020A00F_CMD_PROX_HIGH_EV_EN:
+		if (test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags))
+			return 0;
+		if (gp2ap020a00f_als_enabled(data) ||
+		    data->cur_opmode == GP2AP020A00F_OPMODE_PS)
+			return -EBUSY;
+		if (!gp2ap020a00f_prox_detect_enabled(data)) {
+			err = gp2ap020a00f_set_operation_mode(data,
+					GP2AP020A00F_OPMODE_PROX_DETECT);
+			if (err < 0)
+				return err;
+		}
+		set_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags);
+		err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_PH, true);
+		break;
+	case GP2AP020A00F_CMD_PROX_HIGH_EV_DIS:
+		if (!test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags))
+			return 0;
+		clear_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags);
+		err = gp2ap020a00f_set_operation_mode(data,
+					GP2AP020A00F_OPMODE_SHUTDOWN);
+		if (err < 0)
+			return err;
+		err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_PH, false);
+		break;
+	case GP2AP020A00F_CMD_PROX_LOW_EV_EN:
+		if (test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags))
+			return 0;
+		if (gp2ap020a00f_als_enabled(data) ||
+		    data->cur_opmode == GP2AP020A00F_OPMODE_PS)
+			return -EBUSY;
+		if (!gp2ap020a00f_prox_detect_enabled(data)) {
+			err = gp2ap020a00f_set_operation_mode(data,
+					GP2AP020A00F_OPMODE_PROX_DETECT);
+			if (err < 0)
+				return err;
+		}
+		set_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags);
+		err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_PL, true);
+		break;
+	case GP2AP020A00F_CMD_PROX_LOW_EV_DIS:
+		if (!test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags))
+			return 0;
+		clear_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags);
+		err = gp2ap020a00f_set_operation_mode(data,
+					GP2AP020A00F_OPMODE_SHUTDOWN);
+		if (err < 0)
+			return err;
+		err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_PL, false);
+		break;
+	}
+
+	return err;
+}
+
+static int wait_conversion_complete_irq(struct gp2ap020a00f_data *data)
+{
+	int ret;
+
+	ret = wait_event_timeout(data->data_ready_queue,
+				 test_bit(GP2AP020A00F_FLAG_DATA_READY,
+					  &data->flags),
+				 GP2AP020A00F_DATA_READY_TIMEOUT);
+	clear_bit(GP2AP020A00F_FLAG_DATA_READY, &data->flags);
+
+	return ret > 0 ? 0 : -ETIME;
+}
+
+static int gp2ap020a00f_read_output(struct gp2ap020a00f_data *data,
+					unsigned int output_reg, int *val)
+{
+	u8 reg_buf[2];
+	int err;
+
+	err = wait_conversion_complete_irq(data);
+	if (err < 0)
+		dev_dbg(&data->client->dev, "data ready timeout\n");
+
+	err = regmap_bulk_read(data->regmap, output_reg, reg_buf, 2);
+	if (err < 0)
+		return err;
+
+	*val = le16_to_cpup((__le16 *)reg_buf);
+
+	return err;
+}
+
+static bool gp2ap020a00f_adjust_lux_mode(struct gp2ap020a00f_data *data,
+				 int output_val)
+{
+	u8 new_range = 0xff;
+	int err;
+
+	if (!test_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags)) {
+		if (output_val > 16000) {
+			set_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags);
+			new_range = GP2AP020A00F_RANGE_A_x128;
+		}
+	} else {
+		if (output_val < 1000) {
+			clear_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags);
+			new_range = GP2AP020A00F_RANGE_A_x8;
+		}
+	}
+
+	if (new_range != 0xff) {
+		/* Clear als threshold registers to avoid spurious
+		 * events caused by lux mode transition.
+		 */
+		err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_TH, false);
+		if (err < 0) {
+			dev_err(&data->client->dev,
+				"Clearing als threshold register failed.\n");
+			return false;
+		}
+
+		err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_TL, false);
+		if (err < 0) {
+			dev_err(&data->client->dev,
+				"Clearing als threshold register failed.\n");
+			return false;
+		}
+
+		/* Change lux mode */
+		err = regmap_update_bits(data->regmap,
+			GP2AP020A00F_OP_REG,
+			GP2AP020A00F_OP3_MASK,
+			GP2AP020A00F_OP3_SHUTDOWN);
+
+		if (err < 0) {
+			dev_err(&data->client->dev,
+				"Shutting down the device failed.\n");
+			return false;
+		}
+
+		err = regmap_update_bits(data->regmap,
+			GP2AP020A00F_ALS_REG,
+			GP2AP020A00F_RANGE_A_MASK,
+			new_range);
+
+		if (err < 0) {
+			dev_err(&data->client->dev,
+				"Adjusting device lux mode failed.\n");
+			return false;
+		}
+
+		err = regmap_update_bits(data->regmap,
+			GP2AP020A00F_OP_REG,
+			GP2AP020A00F_OP3_MASK,
+			GP2AP020A00F_OP3_OPERATION);
+
+		if (err < 0) {
+			dev_err(&data->client->dev,
+				"Powering up the device failed.\n");
+			return false;
+		}
+
+		/* Adjust als threshold register values to the new lux mode */
+		if (test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags)) {
+			err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_TH, true);
+			if (err < 0) {
+				dev_err(&data->client->dev,
+				"Adjusting als threshold value failed.\n");
+				return false;
+			}
+		}
+
+		if (test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags)) {
+			err =  gp2ap020a00f_write_event_threshold(data,
+					GP2AP020A00F_THRESH_TL, true);
+			if (err < 0) {
+				dev_err(&data->client->dev,
+				"Adjusting als threshold value failed.\n");
+				return false;
+			}
+		}
+
+		return true;
+	}
+
+	return false;
+}
+
+static void gp2ap020a00f_output_to_lux(struct gp2ap020a00f_data *data,
+						int *output_val)
+{
+	if (test_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags))
+		*output_val *= 16;
+}
+
+static void gp2ap020a00f_iio_trigger_work(struct irq_work *work)
+{
+	struct gp2ap020a00f_data *data =
+		container_of(work, struct gp2ap020a00f_data, work);
+
+	iio_trigger_poll(data->trig);
+}
+
+static irqreturn_t gp2ap020a00f_prox_sensing_handler(int irq, void *data)
+{
+	struct iio_dev *indio_dev = data;
+	struct gp2ap020a00f_data *priv = iio_priv(indio_dev);
+	unsigned int op_reg_val;
+	int ret;
+
+	/* Read interrupt flags */
+	ret = regmap_read(priv->regmap, GP2AP020A00F_OP_REG, &op_reg_val);
+	if (ret < 0)
+		return IRQ_HANDLED;
+
+	if (gp2ap020a00f_prox_detect_enabled(priv)) {
+		if (op_reg_val & GP2AP020A00F_PROX_DETECT) {
+			iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(
+				    IIO_PROXIMITY,
+				    GP2AP020A00F_SCAN_MODE_PROXIMITY,
+				    IIO_EV_TYPE_ROC,
+				    IIO_EV_DIR_RISING),
+			       iio_get_time_ns(indio_dev));
+		} else {
+			iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(
+				    IIO_PROXIMITY,
+				    GP2AP020A00F_SCAN_MODE_PROXIMITY,
+				    IIO_EV_TYPE_ROC,
+				    IIO_EV_DIR_FALLING),
+			       iio_get_time_ns(indio_dev));
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t gp2ap020a00f_thresh_event_handler(int irq, void *data)
+{
+	struct iio_dev *indio_dev = data;
+	struct gp2ap020a00f_data *priv = iio_priv(indio_dev);
+	u8 op_reg_flags, d0_reg_buf[2];
+	unsigned int output_val, op_reg_val;
+	int thresh_val_id, ret;
+
+	/* Read interrupt flags */
+	ret = regmap_read(priv->regmap, GP2AP020A00F_OP_REG,
+							&op_reg_val);
+	if (ret < 0)
+		goto done;
+
+	op_reg_flags = op_reg_val & (GP2AP020A00F_FLAG_A | GP2AP020A00F_FLAG_P
+					| GP2AP020A00F_PROX_DETECT);
+
+	op_reg_val &= (~GP2AP020A00F_FLAG_A & ~GP2AP020A00F_FLAG_P
+					& ~GP2AP020A00F_PROX_DETECT);
+
+	/* Clear interrupt flags (if not in INTTYPE_PULSE mode) */
+	if (priv->cur_opmode != GP2AP020A00F_OPMODE_PROX_DETECT) {
+		ret = regmap_write(priv->regmap, GP2AP020A00F_OP_REG,
+								op_reg_val);
+		if (ret < 0)
+			goto done;
+	}
+
+	if (op_reg_flags & GP2AP020A00F_FLAG_A) {
+		/* Check D0 register to assess if the lux mode
+		 * transition is required.
+		 */
+		ret = regmap_bulk_read(priv->regmap, GP2AP020A00F_D0_L_REG,
+							d0_reg_buf, 2);
+		if (ret < 0)
+			goto done;
+
+		output_val = le16_to_cpup((__le16 *)d0_reg_buf);
+
+		if (gp2ap020a00f_adjust_lux_mode(priv, output_val))
+			goto done;
+
+		gp2ap020a00f_output_to_lux(priv, &output_val);
+
+		/*
+		 * We need to check output value to distinguish
+		 * between high and low ambient light threshold event.
+		 */
+		if (test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &priv->flags)) {
+			thresh_val_id =
+			    GP2AP020A00F_THRESH_VAL_ID(GP2AP020A00F_TH_L_REG);
+			if (output_val > priv->thresh_val[thresh_val_id])
+				iio_push_event(indio_dev,
+				       IIO_MOD_EVENT_CODE(
+					    IIO_LIGHT,
+					    GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR,
+					    IIO_MOD_LIGHT_CLEAR,
+					    IIO_EV_TYPE_THRESH,
+					    IIO_EV_DIR_RISING),
+				       iio_get_time_ns(indio_dev));
+		}
+
+		if (test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &priv->flags)) {
+			thresh_val_id =
+			    GP2AP020A00F_THRESH_VAL_ID(GP2AP020A00F_TL_L_REG);
+			if (output_val < priv->thresh_val[thresh_val_id])
+				iio_push_event(indio_dev,
+				       IIO_MOD_EVENT_CODE(
+					    IIO_LIGHT,
+					    GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR,
+					    IIO_MOD_LIGHT_CLEAR,
+					    IIO_EV_TYPE_THRESH,
+					    IIO_EV_DIR_FALLING),
+				       iio_get_time_ns(indio_dev));
+		}
+	}
+
+	if (priv->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_CLEAR ||
+	    priv->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_IR ||
+	    priv->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY) {
+		set_bit(GP2AP020A00F_FLAG_DATA_READY, &priv->flags);
+		wake_up(&priv->data_ready_queue);
+		goto done;
+	}
+
+	if (test_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &priv->flags) ||
+	    test_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &priv->flags) ||
+	    test_bit(GP2AP020A00F_FLAG_PROX_TRIGGER, &priv->flags))
+		/* This fires off the trigger. */
+		irq_work_queue(&priv->work);
+
+done:
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t gp2ap020a00f_trigger_handler(int irq, void *data)
+{
+	struct iio_poll_func *pf = data;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct gp2ap020a00f_data *priv = iio_priv(indio_dev);
+	size_t d_size = 0;
+	int i, out_val, ret;
+
+	for_each_set_bit(i, indio_dev->active_scan_mask,
+		indio_dev->masklength) {
+		ret = regmap_bulk_read(priv->regmap,
+				GP2AP020A00F_DATA_REG(i),
+				&priv->buffer[d_size], 2);
+		if (ret < 0)
+			goto done;
+
+		if (i == GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR ||
+		    i == GP2AP020A00F_SCAN_MODE_LIGHT_IR) {
+			out_val = le16_to_cpup((__le16 *)&priv->buffer[d_size]);
+			gp2ap020a00f_output_to_lux(priv, &out_val);
+
+			put_unaligned_le32(out_val, &priv->buffer[d_size]);
+			d_size += 4;
+		} else {
+			d_size += 2;
+		}
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, priv->buffer,
+		pf->timestamp);
+done:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static u8 gp2ap020a00f_get_thresh_reg(const struct iio_chan_spec *chan,
+					     enum iio_event_direction event_dir)
+{
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		if (event_dir == IIO_EV_DIR_RISING)
+			return GP2AP020A00F_PH_L_REG;
+		else
+			return GP2AP020A00F_PL_L_REG;
+	case IIO_LIGHT:
+		if (event_dir == IIO_EV_DIR_RISING)
+			return GP2AP020A00F_TH_L_REG;
+		else
+			return GP2AP020A00F_TL_L_REG;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static int gp2ap020a00f_write_event_val(struct iio_dev *indio_dev,
+					const struct iio_chan_spec *chan,
+					enum iio_event_type type,
+					enum iio_event_direction dir,
+					enum iio_event_info info,
+					int val, int val2)
+{
+	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+	bool event_en = false;
+	u8 thresh_val_id;
+	u8 thresh_reg_l;
+	int err = 0;
+
+	mutex_lock(&data->lock);
+
+	thresh_reg_l = gp2ap020a00f_get_thresh_reg(chan, dir);
+	thresh_val_id = GP2AP020A00F_THRESH_VAL_ID(thresh_reg_l);
+
+	if (thresh_val_id > GP2AP020A00F_THRESH_PH) {
+		err = -EINVAL;
+		goto error_unlock;
+	}
+
+	switch (thresh_reg_l) {
+	case GP2AP020A00F_TH_L_REG:
+		event_en = test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV,
+							&data->flags);
+		break;
+	case GP2AP020A00F_TL_L_REG:
+		event_en = test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV,
+							&data->flags);
+		break;
+	case GP2AP020A00F_PH_L_REG:
+		if (val == 0) {
+			err = -EINVAL;
+			goto error_unlock;
+		}
+		event_en = test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV,
+							&data->flags);
+		break;
+	case GP2AP020A00F_PL_L_REG:
+		if (val == 0) {
+			err = -EINVAL;
+			goto error_unlock;
+		}
+		event_en = test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV,
+							&data->flags);
+		break;
+	}
+
+	data->thresh_val[thresh_val_id] = val;
+	err =  gp2ap020a00f_write_event_threshold(data, thresh_val_id,
+							event_en);
+error_unlock:
+	mutex_unlock(&data->lock);
+
+	return err;
+}
+
+static int gp2ap020a00f_read_event_val(struct iio_dev *indio_dev,
+				       const struct iio_chan_spec *chan,
+				       enum iio_event_type type,
+				       enum iio_event_direction dir,
+				       enum iio_event_info info,
+				       int *val, int *val2)
+{
+	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+	u8 thresh_reg_l;
+	int err = IIO_VAL_INT;
+
+	mutex_lock(&data->lock);
+
+	thresh_reg_l = gp2ap020a00f_get_thresh_reg(chan, dir);
+
+	if (thresh_reg_l > GP2AP020A00F_PH_L_REG) {
+		err = -EINVAL;
+		goto error_unlock;
+	}
+
+	*val = data->thresh_val[GP2AP020A00F_THRESH_VAL_ID(thresh_reg_l)];
+
+error_unlock:
+	mutex_unlock(&data->lock);
+
+	return err;
+}
+
+static int gp2ap020a00f_write_prox_event_config(struct iio_dev *indio_dev,
+						int state)
+{
+	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+	enum gp2ap020a00f_cmd cmd_high_ev, cmd_low_ev;
+	int err;
+
+	cmd_high_ev = state ? GP2AP020A00F_CMD_PROX_HIGH_EV_EN :
+			      GP2AP020A00F_CMD_PROX_HIGH_EV_DIS;
+	cmd_low_ev = state ? GP2AP020A00F_CMD_PROX_LOW_EV_EN :
+			     GP2AP020A00F_CMD_PROX_LOW_EV_DIS;
+
+	/*
+	 * In order to enable proximity detection feature in the device
+	 * both high and low threshold registers have to be written
+	 * with different values, greater than zero.
+	 */
+	if (state) {
+		if (data->thresh_val[GP2AP020A00F_THRESH_PL] == 0)
+			return -EINVAL;
+
+		if (data->thresh_val[GP2AP020A00F_THRESH_PH] == 0)
+			return -EINVAL;
+	}
+
+	err = gp2ap020a00f_exec_cmd(data, cmd_high_ev);
+	if (err < 0)
+		return err;
+
+	err = gp2ap020a00f_exec_cmd(data, cmd_low_ev);
+	if (err < 0)
+		return err;
+
+	free_irq(data->client->irq, indio_dev);
+
+	if (state)
+		err = request_threaded_irq(data->client->irq, NULL,
+					   &gp2ap020a00f_prox_sensing_handler,
+					   IRQF_TRIGGER_RISING |
+					   IRQF_TRIGGER_FALLING |
+					   IRQF_ONESHOT,
+					   "gp2ap020a00f_prox_sensing",
+					   indio_dev);
+	else {
+		err = request_threaded_irq(data->client->irq, NULL,
+					   &gp2ap020a00f_thresh_event_handler,
+					   IRQF_TRIGGER_FALLING |
+					   IRQF_ONESHOT,
+					   "gp2ap020a00f_thresh_event",
+					   indio_dev);
+	}
+
+	return err;
+}
+
+static int gp2ap020a00f_write_event_config(struct iio_dev *indio_dev,
+					   const struct iio_chan_spec *chan,
+					   enum iio_event_type type,
+					   enum iio_event_direction dir,
+					   int state)
+{
+	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+	enum gp2ap020a00f_cmd cmd;
+	int err;
+
+	mutex_lock(&data->lock);
+
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		err = gp2ap020a00f_write_prox_event_config(indio_dev, state);
+		break;
+	case IIO_LIGHT:
+		if (dir == IIO_EV_DIR_RISING) {
+			cmd = state ? GP2AP020A00F_CMD_ALS_HIGH_EV_EN :
+				      GP2AP020A00F_CMD_ALS_HIGH_EV_DIS;
+			err = gp2ap020a00f_exec_cmd(data, cmd);
+		} else {
+			cmd = state ? GP2AP020A00F_CMD_ALS_LOW_EV_EN :
+				      GP2AP020A00F_CMD_ALS_LOW_EV_DIS;
+			err = gp2ap020a00f_exec_cmd(data, cmd);
+		}
+		break;
+	default:
+		err = -EINVAL;
+	}
+
+	mutex_unlock(&data->lock);
+
+	return err;
+}
+
+static int gp2ap020a00f_read_event_config(struct iio_dev *indio_dev,
+					   const struct iio_chan_spec *chan,
+					   enum iio_event_type type,
+					   enum iio_event_direction dir)
+{
+	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+	int event_en = 0;
+
+	mutex_lock(&data->lock);
+
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		if (dir == IIO_EV_DIR_RISING)
+			event_en = test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV,
+								&data->flags);
+		else
+			event_en = test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV,
+								&data->flags);
+		break;
+	case IIO_LIGHT:
+		if (dir == IIO_EV_DIR_RISING)
+			event_en = test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV,
+								&data->flags);
+		else
+			event_en = test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV,
+								&data->flags);
+		break;
+	default:
+		event_en = -EINVAL;
+		break;
+	}
+
+	mutex_unlock(&data->lock);
+
+	return event_en;
+}
+
+static int gp2ap020a00f_read_channel(struct gp2ap020a00f_data *data,
+				struct iio_chan_spec const *chan, int *val)
+{
+	enum gp2ap020a00f_cmd cmd;
+	int err;
+
+	switch (chan->scan_index) {
+	case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR:
+		cmd = GP2AP020A00F_CMD_READ_RAW_CLEAR;
+		break;
+	case GP2AP020A00F_SCAN_MODE_LIGHT_IR:
+		cmd = GP2AP020A00F_CMD_READ_RAW_IR;
+		break;
+	case GP2AP020A00F_SCAN_MODE_PROXIMITY:
+		cmd = GP2AP020A00F_CMD_READ_RAW_PROXIMITY;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	err = gp2ap020a00f_exec_cmd(data, cmd);
+	if (err < 0) {
+		dev_err(&data->client->dev,
+			"gp2ap020a00f_exec_cmd failed\n");
+		goto error_ret;
+	}
+
+	err = gp2ap020a00f_read_output(data, chan->address, val);
+	if (err < 0)
+		dev_err(&data->client->dev,
+			"gp2ap020a00f_read_output failed\n");
+
+	err = gp2ap020a00f_set_operation_mode(data,
+					GP2AP020A00F_OPMODE_SHUTDOWN);
+	if (err < 0)
+		dev_err(&data->client->dev,
+			"Failed to shut down the device.\n");
+
+	if (cmd == GP2AP020A00F_CMD_READ_RAW_CLEAR ||
+	    cmd == GP2AP020A00F_CMD_READ_RAW_IR)
+		gp2ap020a00f_output_to_lux(data, val);
+
+error_ret:
+	return err;
+}
+
+static int gp2ap020a00f_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2,
+			   long mask)
+{
+	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+	int err = -EINVAL;
+
+	if (mask == IIO_CHAN_INFO_RAW) {
+		err = iio_device_claim_direct_mode(indio_dev);
+		if (err)
+			return err;
+
+		err = gp2ap020a00f_read_channel(data, chan, val);
+		iio_device_release_direct_mode(indio_dev);
+	}
+	return err < 0 ? err : IIO_VAL_INT;
+}
+
+static const struct iio_event_spec gp2ap020a00f_event_spec_light[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static const struct iio_event_spec gp2ap020a00f_event_spec_prox[] = {
+	{
+		.type = IIO_EV_TYPE_ROC,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	}, {
+		.type = IIO_EV_TYPE_ROC,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static const struct iio_chan_spec gp2ap020a00f_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.channel2 = IIO_MOD_LIGHT_CLEAR,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 24,
+			.shift = 0,
+			.storagebits = 32,
+			.endianness = IIO_LE,
+		},
+		.scan_index = GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR,
+		.address = GP2AP020A00F_D0_L_REG,
+		.event_spec = gp2ap020a00f_event_spec_light,
+		.num_event_specs = ARRAY_SIZE(gp2ap020a00f_event_spec_light),
+	},
+	{
+		.type = IIO_LIGHT,
+		.channel2 = IIO_MOD_LIGHT_IR,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 24,
+			.shift = 0,
+			.storagebits = 32,
+			.endianness = IIO_LE,
+		},
+		.scan_index = GP2AP020A00F_SCAN_MODE_LIGHT_IR,
+		.address = GP2AP020A00F_D1_L_REG,
+	},
+	{
+		.type = IIO_PROXIMITY,
+		.modified = 0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 16,
+			.shift = 0,
+			.storagebits = 16,
+			.endianness = IIO_LE,
+		},
+		.scan_index = GP2AP020A00F_SCAN_MODE_PROXIMITY,
+		.address = GP2AP020A00F_D2_L_REG,
+		.event_spec = gp2ap020a00f_event_spec_prox,
+		.num_event_specs = ARRAY_SIZE(gp2ap020a00f_event_spec_prox),
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(GP2AP020A00F_CHAN_TIMESTAMP),
+};
+
+static const struct iio_info gp2ap020a00f_info = {
+	.read_raw = &gp2ap020a00f_read_raw,
+	.read_event_value = &gp2ap020a00f_read_event_val,
+	.read_event_config = &gp2ap020a00f_read_event_config,
+	.write_event_value = &gp2ap020a00f_write_event_val,
+	.write_event_config = &gp2ap020a00f_write_event_config,
+};
+
+static int gp2ap020a00f_buffer_postenable(struct iio_dev *indio_dev)
+{
+	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+	int i, err = 0;
+
+	mutex_lock(&data->lock);
+
+	/*
+	 * Enable triggers according to the scan_mask. Enabling either
+	 * LIGHT_CLEAR or LIGHT_IR scan mode results in enabling ALS
+	 * module in the device, which generates samples in both D0 (clear)
+	 * and D1 (ir) registers. As the two registers are bound to the
+	 * two separate IIO channels they are treated in the driver logic
+	 * as if they were controlled independently.
+	 */
+	for_each_set_bit(i, indio_dev->active_scan_mask,
+		indio_dev->masklength) {
+		switch (i) {
+		case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR:
+			err = gp2ap020a00f_exec_cmd(data,
+					GP2AP020A00F_CMD_TRIGGER_CLEAR_EN);
+			break;
+		case GP2AP020A00F_SCAN_MODE_LIGHT_IR:
+			err = gp2ap020a00f_exec_cmd(data,
+					GP2AP020A00F_CMD_TRIGGER_IR_EN);
+			break;
+		case GP2AP020A00F_SCAN_MODE_PROXIMITY:
+			err = gp2ap020a00f_exec_cmd(data,
+					GP2AP020A00F_CMD_TRIGGER_PROX_EN);
+			break;
+		}
+	}
+
+	if (err < 0)
+		goto error_unlock;
+
+	data->buffer = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+	if (!data->buffer)
+		err = -ENOMEM;
+
+error_unlock:
+	mutex_unlock(&data->lock);
+
+	return err;
+}
+
+static int gp2ap020a00f_buffer_predisable(struct iio_dev *indio_dev)
+{
+	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+	int i, err = 0;
+
+	mutex_lock(&data->lock);
+
+	for_each_set_bit(i, indio_dev->active_scan_mask,
+		indio_dev->masklength) {
+		switch (i) {
+		case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR:
+			err = gp2ap020a00f_exec_cmd(data,
+					GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS);
+			break;
+		case GP2AP020A00F_SCAN_MODE_LIGHT_IR:
+			err = gp2ap020a00f_exec_cmd(data,
+					GP2AP020A00F_CMD_TRIGGER_IR_DIS);
+			break;
+		case GP2AP020A00F_SCAN_MODE_PROXIMITY:
+			err = gp2ap020a00f_exec_cmd(data,
+					GP2AP020A00F_CMD_TRIGGER_PROX_DIS);
+			break;
+		}
+	}
+
+	if (err == 0)
+		kfree(data->buffer);
+
+	mutex_unlock(&data->lock);
+
+	return err;
+}
+
+static const struct iio_buffer_setup_ops gp2ap020a00f_buffer_setup_ops = {
+	.postenable = &gp2ap020a00f_buffer_postenable,
+	.predisable = &gp2ap020a00f_buffer_predisable,
+};
+
+static int gp2ap020a00f_probe(struct i2c_client *client)
+{
+	const struct i2c_device_id *id = i2c_client_get_device_id(client);
+	struct gp2ap020a00f_data *data;
+	struct iio_dev *indio_dev;
+	struct regmap *regmap;
+	int err;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+
+	data->vled_reg = devm_regulator_get(&client->dev, "vled");
+	if (IS_ERR(data->vled_reg))
+		return PTR_ERR(data->vled_reg);
+
+	err = regulator_enable(data->vled_reg);
+	if (err)
+		return err;
+
+	regmap = devm_regmap_init_i2c(client, &gp2ap020a00f_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Regmap initialization failed.\n");
+		err = PTR_ERR(regmap);
+		goto error_regulator_disable;
+	}
+
+	/* Initialize device registers */
+	err = regmap_bulk_write(regmap, GP2AP020A00F_OP_REG,
+			gp2ap020a00f_reg_init_tab,
+			ARRAY_SIZE(gp2ap020a00f_reg_init_tab));
+
+	if (err < 0) {
+		dev_err(&client->dev, "Device initialization failed.\n");
+		goto error_regulator_disable;
+	}
+
+	i2c_set_clientdata(client, indio_dev);
+
+	data->client = client;
+	data->cur_opmode = GP2AP020A00F_OPMODE_SHUTDOWN;
+	data->regmap = regmap;
+	init_waitqueue_head(&data->data_ready_queue);
+
+	mutex_init(&data->lock);
+	indio_dev->channels = gp2ap020a00f_channels;
+	indio_dev->num_channels = ARRAY_SIZE(gp2ap020a00f_channels);
+	indio_dev->info = &gp2ap020a00f_info;
+	indio_dev->name = id->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	/* Allocate buffer */
+	err = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+		&gp2ap020a00f_trigger_handler, &gp2ap020a00f_buffer_setup_ops);
+	if (err < 0)
+		goto error_regulator_disable;
+
+	/* Allocate trigger */
+	data->trig = devm_iio_trigger_alloc(&client->dev, "%s-trigger",
+							indio_dev->name);
+	if (data->trig == NULL) {
+		err = -ENOMEM;
+		dev_err(&indio_dev->dev, "Failed to allocate iio trigger.\n");
+		goto error_uninit_buffer;
+	}
+
+	/* This needs to be requested here for read_raw calls to work. */
+	err = request_threaded_irq(client->irq, NULL,
+				   &gp2ap020a00f_thresh_event_handler,
+				   IRQF_TRIGGER_FALLING |
+				   IRQF_ONESHOT,
+				   "gp2ap020a00f_als_event",
+				   indio_dev);
+	if (err < 0) {
+		dev_err(&client->dev, "Irq request failed.\n");
+		goto error_uninit_buffer;
+	}
+
+	init_irq_work(&data->work, gp2ap020a00f_iio_trigger_work);
+
+	err = iio_trigger_register(data->trig);
+	if (err < 0) {
+		dev_err(&client->dev, "Failed to register iio trigger.\n");
+		goto error_free_irq;
+	}
+
+	err = iio_device_register(indio_dev);
+	if (err < 0)
+		goto error_trigger_unregister;
+
+	return 0;
+
+error_trigger_unregister:
+	iio_trigger_unregister(data->trig);
+error_free_irq:
+	free_irq(client->irq, indio_dev);
+error_uninit_buffer:
+	iio_triggered_buffer_cleanup(indio_dev);
+error_regulator_disable:
+	regulator_disable(data->vled_reg);
+
+	return err;
+}
+
+static void gp2ap020a00f_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+	int err;
+
+	err = gp2ap020a00f_set_operation_mode(data,
+					GP2AP020A00F_OPMODE_SHUTDOWN);
+	if (err < 0)
+		dev_err(&indio_dev->dev, "Failed to power off the device.\n");
+
+	iio_device_unregister(indio_dev);
+	iio_trigger_unregister(data->trig);
+	free_irq(client->irq, indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	regulator_disable(data->vled_reg);
+}
+
+static const struct i2c_device_id gp2ap020a00f_id[] = {
+	{ GP2A_I2C_NAME, 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, gp2ap020a00f_id);
+
+static const struct of_device_id gp2ap020a00f_of_match[] = {
+	{ .compatible = "sharp,gp2ap020a00f" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, gp2ap020a00f_of_match);
+
+static struct i2c_driver gp2ap020a00f_driver = {
+	.driver = {
+		.name	= GP2A_I2C_NAME,
+		.of_match_table = gp2ap020a00f_of_match,
+	},
+	.probe_new	= gp2ap020a00f_probe,
+	.remove		= gp2ap020a00f_remove,
+	.id_table	= gp2ap020a00f_id,
+};
+
+module_i2c_driver(gp2ap020a00f_driver);
+
+MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@samsung.com>");
+MODULE_DESCRIPTION("Sharp GP2AP020A00F Proximity/ALS sensor driver");
+MODULE_LICENSE("GPL v2");