Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 348 insertions, 0 deletions

diff --git a/drivers/iio/light/isl29125.c b/drivers/iio/light/isl29125.c
new file mode 100644
index 000000000..b4bd656ca
--- /dev/null
+++ b/drivers/iio/light/isl29125.c
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * isl29125.c - Support for Intersil ISL29125 RGB light sensor
+ *
+ * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net>
+ *
+ * RGB light sensor with 16-bit channels for red, green, blue);
+ * 7-bit I2C slave address 0x44
+ *
+ * TODO: interrupt support, IR compensation, thresholds, 12bit
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define ISL29125_DRV_NAME "isl29125"
+
+#define ISL29125_DEVICE_ID 0x00
+#define ISL29125_CONF1 0x01
+#define ISL29125_CONF2 0x02
+#define ISL29125_CONF3 0x03
+#define ISL29125_STATUS 0x08
+#define ISL29125_GREEN_DATA 0x09
+#define ISL29125_RED_DATA 0x0b
+#define ISL29125_BLUE_DATA 0x0d
+
+#define ISL29125_ID 0x7d
+
+#define ISL29125_MODE_MASK GENMASK(2, 0)
+#define ISL29125_MODE_PD 0x0
+#define ISL29125_MODE_G 0x1
+#define ISL29125_MODE_R 0x2
+#define ISL29125_MODE_B 0x3
+#define ISL29125_MODE_RGB 0x5
+
+#define ISL29125_SENSING_RANGE_0 5722   /* 375 lux full range */
+#define ISL29125_SENSING_RANGE_1 152590 /* 10k lux full range */
+
+#define ISL29125_MODE_RANGE BIT(3)
+
+#define ISL29125_STATUS_CONV BIT(1)
+
+struct isl29125_data {
+	struct i2c_client *client;
+	u8 conf1;
+	/* Ensure timestamp is naturally aligned */
+	struct {
+		u16 chans[3];
+		s64 timestamp __aligned(8);
+	} scan;
+};
+
+#define ISL29125_CHANNEL(_color, _si) { \
+	.type = IIO_INTENSITY, \
+	.modified = 1, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+	.channel2 = IIO_MOD_LIGHT_##_color, \
+	.scan_index = _si, \
+	.scan_type = { \
+		.sign = 'u', \
+		.realbits = 16, \
+		.storagebits = 16, \
+		.endianness = IIO_CPU, \
+	}, \
+}
+
+static const struct iio_chan_spec isl29125_channels[] = {
+	ISL29125_CHANNEL(GREEN, 0),
+	ISL29125_CHANNEL(RED, 1),
+	ISL29125_CHANNEL(BLUE, 2),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static const struct {
+	u8 mode, data;
+} isl29125_regs[] = {
+	{ISL29125_MODE_G, ISL29125_GREEN_DATA},
+	{ISL29125_MODE_R, ISL29125_RED_DATA},
+	{ISL29125_MODE_B, ISL29125_BLUE_DATA},
+};
+
+static int isl29125_read_data(struct isl29125_data *data, int si)
+{
+	int tries = 5;
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
+		data->conf1 | isl29125_regs[si].mode);
+	if (ret < 0)
+		return ret;
+
+	msleep(101);
+
+	while (tries--) {
+		ret = i2c_smbus_read_byte_data(data->client, ISL29125_STATUS);
+		if (ret < 0)
+			goto fail;
+		if (ret & ISL29125_STATUS_CONV)
+			break;
+		msleep(20);
+	}
+
+	if (tries < 0) {
+		dev_err(&data->client->dev, "data not ready\n");
+		ret = -EIO;
+		goto fail;
+	}
+
+	ret = i2c_smbus_read_word_data(data->client, isl29125_regs[si].data);
+
+fail:
+	i2c_smbus_write_byte_data(data->client, ISL29125_CONF1, data->conf1);
+	return ret;
+}
+
+static int isl29125_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long mask)
+{
+	struct isl29125_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+		ret = isl29125_read_data(data, chan->scan_index);
+		iio_device_release_direct_mode(indio_dev);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		if (data->conf1 & ISL29125_MODE_RANGE)
+			*val2 = ISL29125_SENSING_RANGE_1; /*10k lux full range*/
+		else
+			*val2 = ISL29125_SENSING_RANGE_0; /*375 lux full range*/
+		return IIO_VAL_INT_PLUS_MICRO;
+	}
+	return -EINVAL;
+}
+
+static int isl29125_write_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int val, int val2, long mask)
+{
+	struct isl29125_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		if (val != 0)
+			return -EINVAL;
+		if (val2 == ISL29125_SENSING_RANGE_1)
+			data->conf1 |= ISL29125_MODE_RANGE;
+		else if (val2 == ISL29125_SENSING_RANGE_0)
+			data->conf1 &= ~ISL29125_MODE_RANGE;
+		else
+			return -EINVAL;
+		return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
+			data->conf1);
+	default:
+		return -EINVAL;
+	}
+}
+
+static irqreturn_t isl29125_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct isl29125_data *data = iio_priv(indio_dev);
+	int i, j = 0;
+
+	for_each_set_bit(i, indio_dev->active_scan_mask,
+		indio_dev->masklength) {
+		int ret = i2c_smbus_read_word_data(data->client,
+			isl29125_regs[i].data);
+		if (ret < 0)
+			goto done;
+
+		data->scan.chans[j++] = ret;
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
+		iio_get_time_ns(indio_dev));
+
+done:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static IIO_CONST_ATTR(scale_available, "0.005722 0.152590");
+
+static struct attribute *isl29125_attributes[] = {
+	&iio_const_attr_scale_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group isl29125_attribute_group = {
+	.attrs = isl29125_attributes,
+};
+
+static const struct iio_info isl29125_info = {
+	.read_raw = isl29125_read_raw,
+	.write_raw = isl29125_write_raw,
+	.attrs = &isl29125_attribute_group,
+};
+
+static int isl29125_buffer_postenable(struct iio_dev *indio_dev)
+{
+	struct isl29125_data *data = iio_priv(indio_dev);
+
+	data->conf1 |= ISL29125_MODE_RGB;
+	return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
+		data->conf1);
+}
+
+static int isl29125_buffer_predisable(struct iio_dev *indio_dev)
+{
+	struct isl29125_data *data = iio_priv(indio_dev);
+
+	data->conf1 &= ~ISL29125_MODE_MASK;
+	data->conf1 |= ISL29125_MODE_PD;
+	return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
+		data->conf1);
+}
+
+static const struct iio_buffer_setup_ops isl29125_buffer_setup_ops = {
+	.postenable = isl29125_buffer_postenable,
+	.predisable = isl29125_buffer_predisable,
+};
+
+static int isl29125_probe(struct i2c_client *client)
+{
+	struct isl29125_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+
+	indio_dev->info = &isl29125_info;
+	indio_dev->name = ISL29125_DRV_NAME;
+	indio_dev->channels = isl29125_channels;
+	indio_dev->num_channels = ARRAY_SIZE(isl29125_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = i2c_smbus_read_byte_data(data->client, ISL29125_DEVICE_ID);
+	if (ret < 0)
+		return ret;
+	if (ret != ISL29125_ID)
+		return -ENODEV;
+
+	data->conf1 = ISL29125_MODE_PD | ISL29125_MODE_RANGE;
+	ret = i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
+		data->conf1);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(data->client, ISL29125_STATUS, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+		isl29125_trigger_handler, &isl29125_buffer_setup_ops);
+	if (ret < 0)
+		return ret;
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0)
+		goto buffer_cleanup;
+
+	return 0;
+
+buffer_cleanup:
+	iio_triggered_buffer_cleanup(indio_dev);
+	return ret;
+}
+
+static int isl29125_powerdown(struct isl29125_data *data)
+{
+	return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
+		(data->conf1 & ~ISL29125_MODE_MASK) | ISL29125_MODE_PD);
+}
+
+static void isl29125_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	isl29125_powerdown(iio_priv(indio_dev));
+}
+
+static int isl29125_suspend(struct device *dev)
+{
+	struct isl29125_data *data = iio_priv(i2c_get_clientdata(
+		to_i2c_client(dev)));
+	return isl29125_powerdown(data);
+}
+
+static int isl29125_resume(struct device *dev)
+{
+	struct isl29125_data *data = iio_priv(i2c_get_clientdata(
+		to_i2c_client(dev)));
+	return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
+		data->conf1);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(isl29125_pm_ops, isl29125_suspend,
+				isl29125_resume);
+
+static const struct i2c_device_id isl29125_id[] = {
+	{ "isl29125", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, isl29125_id);
+
+static struct i2c_driver isl29125_driver = {
+	.driver = {
+		.name	= ISL29125_DRV_NAME,
+		.pm	= pm_sleep_ptr(&isl29125_pm_ops),
+	},
+	.probe_new	= isl29125_probe,
+	.remove		= isl29125_remove,
+	.id_table	= isl29125_id,
+};
+module_i2c_driver(isl29125_driver);
+
+MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
+MODULE_DESCRIPTION("ISL29125 RGB light sensor driver");
+MODULE_LICENSE("GPL");