Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 565 insertions, 0 deletions

diff --git a/drivers/iio/light/zopt2201.c b/drivers/iio/light/zopt2201.c
new file mode 100644
index 000000000..e3bac8b56
--- /dev/null
+++ b/drivers/iio/light/zopt2201.c
@@ -0,0 +1,565 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * zopt2201.c - Support for IDT ZOPT2201 ambient light and UV B sensor
+ *
+ * Copyright 2017 Peter Meerwald-Stadler <pmeerw@pmeerw.net>
+ *
+ * Datasheet: https://www.idt.com/document/dst/zopt2201-datasheet
+ * 7-bit I2C slave addresses 0x53 (default) or 0x52 (programmed)
+ *
+ * TODO: interrupt support, ALS/UVB raw mode
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#include <asm/unaligned.h>
+
+#define ZOPT2201_DRV_NAME "zopt2201"
+
+/* Registers */
+#define ZOPT2201_MAIN_CTRL		0x00
+#define ZOPT2201_LS_MEAS_RATE		0x04
+#define ZOPT2201_LS_GAIN		0x05
+#define ZOPT2201_PART_ID		0x06
+#define ZOPT2201_MAIN_STATUS		0x07
+#define ZOPT2201_ALS_DATA		0x0d /* LSB first, 13 to 20 bits */
+#define ZOPT2201_UVB_DATA		0x10 /* LSB first, 13 to 20 bits */
+#define ZOPT2201_UV_COMP_DATA		0x13 /* LSB first, 13 to 20 bits */
+#define ZOPT2201_COMP_DATA		0x16 /* LSB first, 13 to 20 bits */
+#define ZOPT2201_INT_CFG		0x19
+#define ZOPT2201_INT_PST		0x1a
+
+#define ZOPT2201_MAIN_CTRL_LS_MODE	BIT(3) /* 0 .. ALS, 1 .. UV B */
+#define ZOPT2201_MAIN_CTRL_LS_EN	BIT(1)
+
+/* Values for ZOPT2201_LS_MEAS_RATE resolution / bit width */
+#define ZOPT2201_MEAS_RES_20BIT		0 /* takes 400 ms */
+#define ZOPT2201_MEAS_RES_19BIT		1 /* takes 200 ms */
+#define ZOPT2201_MEAS_RES_18BIT		2 /* takes 100 ms, default */
+#define ZOPT2201_MEAS_RES_17BIT		3 /* takes 50 ms */
+#define ZOPT2201_MEAS_RES_16BIT		4 /* takes 25 ms */
+#define ZOPT2201_MEAS_RES_13BIT		5 /* takes 3.125 ms */
+#define ZOPT2201_MEAS_RES_SHIFT		4
+
+/* Values for ZOPT2201_LS_MEAS_RATE measurement rate */
+#define ZOPT2201_MEAS_FREQ_25MS		0
+#define ZOPT2201_MEAS_FREQ_50MS		1
+#define ZOPT2201_MEAS_FREQ_100MS	2 /* default */
+#define ZOPT2201_MEAS_FREQ_200MS	3
+#define ZOPT2201_MEAS_FREQ_500MS	4
+#define ZOPT2201_MEAS_FREQ_1000MS	5
+#define ZOPT2201_MEAS_FREQ_2000MS	6
+
+/* Values for ZOPT2201_LS_GAIN */
+#define ZOPT2201_LS_GAIN_1		0
+#define ZOPT2201_LS_GAIN_3		1
+#define ZOPT2201_LS_GAIN_6		2
+#define ZOPT2201_LS_GAIN_9		3
+#define ZOPT2201_LS_GAIN_18		4
+
+/* Values for ZOPT2201_MAIN_STATUS */
+#define ZOPT2201_MAIN_STATUS_POWERON	BIT(5)
+#define ZOPT2201_MAIN_STATUS_INT	BIT(4)
+#define ZOPT2201_MAIN_STATUS_DRDY	BIT(3)
+
+#define ZOPT2201_PART_NUMBER		0xb2
+
+struct zopt2201_data {
+	struct i2c_client *client;
+	struct mutex lock;
+	u8 gain;
+	u8 res;
+	u8 rate;
+};
+
+static const struct {
+	unsigned int gain; /* gain factor */
+	unsigned int scale; /* micro lux per count */
+} zopt2201_gain_als[] = {
+	{  1, 19200000 },
+	{  3,  6400000 },
+	{  6,  3200000 },
+	{  9,  2133333 },
+	{ 18,  1066666 },
+};
+
+static const struct {
+	unsigned int gain; /* gain factor */
+	unsigned int scale; /* micro W/m2 per count */
+} zopt2201_gain_uvb[] = {
+	{  1, 460800 },
+	{  3, 153600 },
+	{  6,  76800 },
+	{  9,  51200 },
+	{ 18,  25600 },
+};
+
+static const struct {
+	unsigned int bits; /* sensor resolution in bits */
+	unsigned long us; /* measurement time in micro seconds */
+} zopt2201_resolution[] = {
+	{ 20, 400000 },
+	{ 19, 200000 },
+	{ 18, 100000 },
+	{ 17,  50000 },
+	{ 16,  25000 },
+	{ 13,   3125 },
+};
+
+static const struct {
+	unsigned int scale, uscale; /* scale factor as integer + micro */
+	u8 gain; /* gain register value */
+	u8 res; /* resolution register value */
+} zopt2201_scale_als[] = {
+	{ 19, 200000, 0, 5 },
+	{  6, 400000, 1, 5 },
+	{  3, 200000, 2, 5 },
+	{  2, 400000, 0, 4 },
+	{  2, 133333, 3, 5 },
+	{  1, 200000, 0, 3 },
+	{  1,  66666, 4, 5 },
+	{  0, 800000, 1, 4 },
+	{  0, 600000, 0, 2 },
+	{  0, 400000, 2, 4 },
+	{  0, 300000, 0, 1 },
+	{  0, 266666, 3, 4 },
+	{  0, 200000, 2, 3 },
+	{  0, 150000, 0, 0 },
+	{  0, 133333, 4, 4 },
+	{  0, 100000, 2, 2 },
+	{  0,  66666, 4, 3 },
+	{  0,  50000, 2, 1 },
+	{  0,  33333, 4, 2 },
+	{  0,  25000, 2, 0 },
+	{  0,  16666, 4, 1 },
+	{  0,   8333, 4, 0 },
+};
+
+static const struct {
+	unsigned int scale, uscale; /* scale factor as integer + micro */
+	u8 gain; /* gain register value */
+	u8 res; /* resolution register value */
+} zopt2201_scale_uvb[] = {
+	{ 0, 460800, 0, 5 },
+	{ 0, 153600, 1, 5 },
+	{ 0,  76800, 2, 5 },
+	{ 0,  57600, 0, 4 },
+	{ 0,  51200, 3, 5 },
+	{ 0,  28800, 0, 3 },
+	{ 0,  25600, 4, 5 },
+	{ 0,  19200, 1, 4 },
+	{ 0,  14400, 0, 2 },
+	{ 0,   9600, 2, 4 },
+	{ 0,   7200, 0, 1 },
+	{ 0,   6400, 3, 4 },
+	{ 0,   4800, 2, 3 },
+	{ 0,   3600, 0, 0 },
+	{ 0,   3200, 4, 4 },
+	{ 0,   2400, 2, 2 },
+	{ 0,   1600, 4, 3 },
+	{ 0,   1200, 2, 1 },
+	{ 0,    800, 4, 2 },
+	{ 0,    600, 2, 0 },
+	{ 0,    400, 4, 1 },
+	{ 0,    200, 4, 0 },
+};
+
+static int zopt2201_enable_mode(struct zopt2201_data *data, bool uvb_mode)
+{
+	u8 out = ZOPT2201_MAIN_CTRL_LS_EN;
+
+	if (uvb_mode)
+		out |= ZOPT2201_MAIN_CTRL_LS_MODE;
+
+	return i2c_smbus_write_byte_data(data->client, ZOPT2201_MAIN_CTRL, out);
+}
+
+static int zopt2201_read(struct zopt2201_data *data, u8 reg)
+{
+	struct i2c_client *client = data->client;
+	int tries = 10;
+	u8 buf[3];
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = zopt2201_enable_mode(data, reg == ZOPT2201_UVB_DATA);
+	if (ret < 0)
+		goto fail;
+
+	while (tries--) {
+		unsigned long t = zopt2201_resolution[data->res].us;
+
+		if (t <= 20000)
+			usleep_range(t, t + 1000);
+		else
+			msleep(t / 1000);
+		ret = i2c_smbus_read_byte_data(client, ZOPT2201_MAIN_STATUS);
+		if (ret < 0)
+			goto fail;
+		if (ret & ZOPT2201_MAIN_STATUS_DRDY)
+			break;
+	}
+
+	if (tries < 0) {
+		ret = -ETIMEDOUT;
+		goto fail;
+	}
+
+	ret = i2c_smbus_read_i2c_block_data(client, reg, sizeof(buf), buf);
+	if (ret < 0)
+		goto fail;
+
+	ret = i2c_smbus_write_byte_data(client, ZOPT2201_MAIN_CTRL, 0x00);
+	if (ret < 0)
+		goto fail;
+	mutex_unlock(&data->lock);
+
+	return get_unaligned_le24(&buf[0]);
+
+fail:
+	mutex_unlock(&data->lock);
+	return ret;
+}
+
+static const struct iio_chan_spec zopt2201_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.address = ZOPT2201_ALS_DATA,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME),
+	},
+	{
+		.type = IIO_INTENSITY,
+		.modified = 1,
+		.channel2 = IIO_MOD_LIGHT_UV,
+		.address = ZOPT2201_UVB_DATA,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME),
+	},
+	{
+		.type = IIO_UVINDEX,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+	},
+};
+
+static int zopt2201_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int *val, int *val2, long mask)
+{
+	struct zopt2201_data *data = iio_priv(indio_dev);
+	u64 tmp;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = zopt2201_read(data, chan->address);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_PROCESSED:
+		ret = zopt2201_read(data, ZOPT2201_UVB_DATA);
+		if (ret < 0)
+			return ret;
+		*val = ret * 18 *
+			(1 << (20 - zopt2201_resolution[data->res].bits)) /
+			zopt2201_gain_uvb[data->gain].gain;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->address) {
+		case ZOPT2201_ALS_DATA:
+			*val = zopt2201_gain_als[data->gain].scale;
+			break;
+		case ZOPT2201_UVB_DATA:
+			*val = zopt2201_gain_uvb[data->gain].scale;
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		*val2 = 1000000;
+		*val2 *= (1 << (zopt2201_resolution[data->res].bits - 13));
+		tmp = div_s64(*val * 1000000ULL, *val2);
+		*val = div_s64_rem(tmp, 1000000, val2);
+
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_INT_TIME:
+		*val = 0;
+		*val2 = zopt2201_resolution[data->res].us;
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int zopt2201_set_resolution(struct zopt2201_data *data, u8 res)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(data->client, ZOPT2201_LS_MEAS_RATE,
+					(res << ZOPT2201_MEAS_RES_SHIFT) |
+					data->rate);
+	if (ret < 0)
+		return ret;
+
+	data->res = res;
+
+	return 0;
+}
+
+static int zopt2201_write_resolution(struct zopt2201_data *data,
+				     int val, int val2)
+{
+	int i, ret;
+
+	if (val != 0)
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(zopt2201_resolution); i++)
+		if (val2 == zopt2201_resolution[i].us) {
+			mutex_lock(&data->lock);
+			ret = zopt2201_set_resolution(data, i);
+			mutex_unlock(&data->lock);
+			return ret;
+		}
+
+	return -EINVAL;
+}
+
+static int zopt2201_set_gain(struct zopt2201_data *data, u8 gain)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(data->client, ZOPT2201_LS_GAIN, gain);
+	if (ret < 0)
+		return ret;
+
+	data->gain = gain;
+
+	return 0;
+}
+
+static int zopt2201_write_scale_als_by_idx(struct zopt2201_data *data, int idx)
+{
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = zopt2201_set_resolution(data, zopt2201_scale_als[idx].res);
+	if (ret < 0)
+		goto unlock;
+
+	ret = zopt2201_set_gain(data, zopt2201_scale_als[idx].gain);
+
+unlock:
+	mutex_unlock(&data->lock);
+	return ret;
+}
+
+static int zopt2201_write_scale_als(struct zopt2201_data *data,
+				     int val, int val2)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(zopt2201_scale_als); i++)
+		if (val == zopt2201_scale_als[i].scale &&
+		    val2 == zopt2201_scale_als[i].uscale) {
+			return zopt2201_write_scale_als_by_idx(data, i);
+		}
+
+	return -EINVAL;
+}
+
+static int zopt2201_write_scale_uvb_by_idx(struct zopt2201_data *data, int idx)
+{
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = zopt2201_set_resolution(data, zopt2201_scale_als[idx].res);
+	if (ret < 0)
+		goto unlock;
+
+	ret = zopt2201_set_gain(data, zopt2201_scale_als[idx].gain);
+
+unlock:
+	mutex_unlock(&data->lock);
+	return ret;
+}
+
+static int zopt2201_write_scale_uvb(struct zopt2201_data *data,
+				     int val, int val2)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(zopt2201_scale_uvb); i++)
+		if (val == zopt2201_scale_uvb[i].scale &&
+		    val2 == zopt2201_scale_uvb[i].uscale)
+			return zopt2201_write_scale_uvb_by_idx(data, i);
+
+	return -EINVAL;
+}
+
+static int zopt2201_write_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int val, int val2, long mask)
+{
+	struct zopt2201_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_INT_TIME:
+		return zopt2201_write_resolution(data, val, val2);
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->address) {
+		case ZOPT2201_ALS_DATA:
+			return zopt2201_write_scale_als(data, val, val2);
+		case ZOPT2201_UVB_DATA:
+			return zopt2201_write_scale_uvb(data, val, val2);
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static ssize_t zopt2201_show_int_time_available(struct device *dev,
+						struct device_attribute *attr,
+						char *buf)
+{
+	size_t len = 0;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(zopt2201_resolution); i++)
+		len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06lu ",
+				 zopt2201_resolution[i].us);
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static IIO_DEV_ATTR_INT_TIME_AVAIL(zopt2201_show_int_time_available);
+
+static ssize_t zopt2201_show_als_scale_avail(struct device *dev,
+					     struct device_attribute *attr,
+					     char *buf)
+{
+	ssize_t len = 0;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(zopt2201_scale_als); i++)
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%06u ",
+				 zopt2201_scale_als[i].scale,
+				 zopt2201_scale_als[i].uscale);
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static ssize_t zopt2201_show_uvb_scale_avail(struct device *dev,
+					     struct device_attribute *attr,
+					     char *buf)
+{
+	ssize_t len = 0;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(zopt2201_scale_uvb); i++)
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%06u ",
+				 zopt2201_scale_uvb[i].scale,
+				 zopt2201_scale_uvb[i].uscale);
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static IIO_DEVICE_ATTR(in_illuminance_scale_available, 0444,
+		       zopt2201_show_als_scale_avail, NULL, 0);
+static IIO_DEVICE_ATTR(in_intensity_uv_scale_available, 0444,
+		       zopt2201_show_uvb_scale_avail, NULL, 0);
+
+static struct attribute *zopt2201_attributes[] = {
+	&iio_dev_attr_integration_time_available.dev_attr.attr,
+	&iio_dev_attr_in_illuminance_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_intensity_uv_scale_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group zopt2201_attribute_group = {
+	.attrs = zopt2201_attributes,
+};
+
+static const struct iio_info zopt2201_info = {
+	.read_raw = zopt2201_read_raw,
+	.write_raw = zopt2201_write_raw,
+	.attrs = &zopt2201_attribute_group,
+};
+
+static int zopt2201_probe(struct i2c_client *client)
+{
+	struct zopt2201_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_I2C_BLOCK))
+		return -EOPNOTSUPP;
+
+	ret = i2c_smbus_read_byte_data(client, ZOPT2201_PART_ID);
+	if (ret < 0)
+		return ret;
+	if (ret != ZOPT2201_PART_NUMBER)
+		return -ENODEV;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+	mutex_init(&data->lock);
+
+	indio_dev->info = &zopt2201_info;
+	indio_dev->channels = zopt2201_channels;
+	indio_dev->num_channels = ARRAY_SIZE(zopt2201_channels);
+	indio_dev->name = ZOPT2201_DRV_NAME;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	data->rate = ZOPT2201_MEAS_FREQ_100MS;
+	ret = zopt2201_set_resolution(data, ZOPT2201_MEAS_RES_18BIT);
+	if (ret < 0)
+		return ret;
+
+	ret = zopt2201_set_gain(data, ZOPT2201_LS_GAIN_3);
+	if (ret < 0)
+		return ret;
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct i2c_device_id zopt2201_id[] = {
+	{ "zopt2201", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, zopt2201_id);
+
+static struct i2c_driver zopt2201_driver = {
+	.driver = {
+		.name   = ZOPT2201_DRV_NAME,
+	},
+	.probe_new = zopt2201_probe,
+	.id_table = zopt2201_id,
+};
+
+module_i2c_driver(zopt2201_driver);
+
+MODULE_AUTHOR("Peter Meerwald-Stadler <pmeerw@pmeerw.net>");
+MODULE_DESCRIPTION("IDT ZOPT2201 ambient light and UV B sensor driver");
+MODULE_LICENSE("GPL");