Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 155 insertions, 0 deletions

diff --git a/drivers/iio/proximity/sx_common.h b/drivers/iio/proximity/sx_common.h
new file mode 100644
index 000000000..49d451710
--- /dev/null
+++ b/drivers/iio/proximity/sx_common.h
@@ -0,0 +1,155 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2021 Google LLC.
+ *
+ * Code shared between most Semtech SAR sensor driver.
+ */
+
+#ifndef IIO_SX_COMMON_H
+#define IIO_SX_COMMON_H
+
+#include <linux/iio/iio.h>
+#include <linux/iio/types.h>
+#include <linux/regulator/consumer.h>
+#include <linux/types.h>
+
+struct device;
+struct i2c_client;
+struct regmap_config;
+struct sx_common_data;
+
+#define SX_COMMON_REG_IRQ_SRC				0x00
+
+#define SX_COMMON_MAX_NUM_CHANNELS	4
+static_assert(SX_COMMON_MAX_NUM_CHANNELS < BITS_PER_LONG);
+
+struct sx_common_reg_default {
+	u8 reg;
+	u8 def;
+};
+
+/**
+ * struct sx_common_ops: function pointers needed by common code
+ *
+ * List functions needed by common code to gather information or configure
+ * the sensor.
+ *
+ * @read_prox_data:	Function to read raw proximity data.
+ * @check_whoami:	Set device name based on whoami register.
+ * @init_compensation:	Function to set initial compensation.
+ * @wait_for_sample:	When there are no physical IRQ, function to wait for a
+ *			sample to be ready.
+ * @get_default_reg:	Populate the initial value for a given register.
+ */
+struct sx_common_ops {
+	int (*read_prox_data)(struct sx_common_data *data,
+			      const struct iio_chan_spec *chan, __be16 *val);
+	int (*check_whoami)(struct device *dev, struct iio_dev *indio_dev);
+	int (*init_compensation)(struct iio_dev *indio_dev);
+	int (*wait_for_sample)(struct sx_common_data *data);
+	const struct sx_common_reg_default  *
+		(*get_default_reg)(struct device *dev, int idx,
+				   struct sx_common_reg_default *reg_def);
+};
+
+/**
+ * struct sx_common_chip_info: Semtech Sensor private chip information
+ *
+ * @reg_stat:		Main status register address.
+ * @reg_irq_msk:	IRQ mask register address.
+ * @reg_enable_chan:	Address to enable/disable channels.
+ *			Each phase presented by the sensor is an IIO channel..
+ * @reg_reset:		Reset register address.
+ * @mask_enable_chan:	Mask over the channels bits in the enable channel
+ *			register.
+ * @stat_offset:	Offset to check phase status.
+ * @irq_msk_offset:	Offset to enable interrupt in the IRQ mask
+ *			register.
+ * @num_channels:	Number of channels.
+ * @num_default_regs:	Number of internal registers that can be configured.
+ *
+ * @ops:		Private functions pointers.
+ * @iio_channels:	Description of exposed iio channels.
+ * @num_iio_channels:	Number of iio_channels.
+ * @iio_info:		iio_info structure for this driver.
+ */
+struct sx_common_chip_info {
+	unsigned int reg_stat;
+	unsigned int reg_irq_msk;
+	unsigned int reg_enable_chan;
+	unsigned int reg_reset;
+
+	unsigned int mask_enable_chan;
+	unsigned int stat_offset;
+	unsigned int irq_msk_offset;
+	unsigned int num_channels;
+	int num_default_regs;
+
+	struct sx_common_ops ops;
+
+	const struct iio_chan_spec *iio_channels;
+	int num_iio_channels;
+	struct iio_info iio_info;
+};
+
+/**
+ * struct sx_common_data: Semtech Sensor private data structure.
+ *
+ * @chip_info:		Structure defining sensor internals.
+ * @mutex:		Serialize access to registers and channel configuration.
+ * @completion:		completion object to wait for data acquisition.
+ * @client:		I2C client structure.
+ * @trig:		IIO trigger object.
+ * @regmap:		Register map.
+ * @num_default_regs:	Number of default registers to set at init.
+ * @chan_prox_stat:	Last reading of the proximity status for each channel.
+ *			We only send an event to user space when this changes.
+ * @trigger_enabled:	True when the device trigger is enabled.
+ * @buffer:		Buffer to store raw samples.
+ * @suspend_ctrl:	Remember enabled channels and sample rate during suspend.
+ * @chan_read:		Bit field for each raw channel enabled.
+ * @chan_event:		Bit field for each event enabled.
+ */
+struct sx_common_data {
+	const struct sx_common_chip_info *chip_info;
+
+	struct mutex mutex;
+	struct completion completion;
+	struct i2c_client *client;
+	struct iio_trigger *trig;
+	struct regmap *regmap;
+
+	unsigned long chan_prox_stat;
+	bool trigger_enabled;
+
+	/* Ensure correct alignment of timestamp when present. */
+	struct {
+		__be16 channels[SX_COMMON_MAX_NUM_CHANNELS];
+		s64 ts __aligned(8);
+	} buffer;
+
+	unsigned int suspend_ctrl;
+	unsigned long chan_read;
+	unsigned long chan_event;
+};
+
+int sx_common_read_proximity(struct sx_common_data *data,
+			     const struct iio_chan_spec *chan, int *val);
+
+int sx_common_read_event_config(struct iio_dev *indio_dev,
+				const struct iio_chan_spec *chan,
+				enum iio_event_type type,
+				enum iio_event_direction dir);
+int sx_common_write_event_config(struct iio_dev *indio_dev,
+				 const struct iio_chan_spec *chan,
+				 enum iio_event_type type,
+				 enum iio_event_direction dir, int state);
+
+int sx_common_probe(struct i2c_client *client,
+		    const struct sx_common_chip_info *chip_info,
+		    const struct regmap_config *regmap_config);
+
+/* 3 is the number of events defined by a single phase. */
+extern const struct iio_event_spec sx_common_events[3];
+
+#endif  /* IIO_SX_COMMON_H */