Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 234 insertions, 0 deletions

diff --git a/drivers/infiniband/sw/rxe/rxe.c b/drivers/infiniband/sw/rxe/rxe.c
new file mode 100644
index 000000000..136c2efe3
--- /dev/null
+++ b/drivers/infiniband/sw/rxe/rxe.c
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB
+/*
+ * Copyright (c) 2016 Mellanox Technologies Ltd. All rights reserved.
+ * Copyright (c) 2015 System Fabric Works, Inc. All rights reserved.
+ */
+
+#include <rdma/rdma_netlink.h>
+#include <net/addrconf.h>
+#include "rxe.h"
+#include "rxe_loc.h"
+
+MODULE_AUTHOR("Bob Pearson, Frank Zago, John Groves, Kamal Heib");
+MODULE_DESCRIPTION("Soft RDMA transport");
+MODULE_LICENSE("Dual BSD/GPL");
+
+/* free resources for a rxe device all objects created for this device must
+ * have been destroyed
+ */
+void rxe_dealloc(struct ib_device *ib_dev)
+{
+	struct rxe_dev *rxe = container_of(ib_dev, struct rxe_dev, ib_dev);
+
+	rxe_pool_cleanup(&rxe->uc_pool);
+	rxe_pool_cleanup(&rxe->pd_pool);
+	rxe_pool_cleanup(&rxe->ah_pool);
+	rxe_pool_cleanup(&rxe->srq_pool);
+	rxe_pool_cleanup(&rxe->qp_pool);
+	rxe_pool_cleanup(&rxe->cq_pool);
+	rxe_pool_cleanup(&rxe->mr_pool);
+	rxe_pool_cleanup(&rxe->mw_pool);
+
+	WARN_ON(!RB_EMPTY_ROOT(&rxe->mcg_tree));
+
+	if (rxe->tfm)
+		crypto_free_shash(rxe->tfm);
+}
+
+/* initialize rxe device parameters */
+static void rxe_init_device_param(struct rxe_dev *rxe)
+{
+	rxe->max_inline_data			= RXE_MAX_INLINE_DATA;
+
+	rxe->attr.vendor_id			= RXE_VENDOR_ID;
+	rxe->attr.max_mr_size			= RXE_MAX_MR_SIZE;
+	rxe->attr.page_size_cap			= RXE_PAGE_SIZE_CAP;
+	rxe->attr.max_qp			= RXE_MAX_QP;
+	rxe->attr.max_qp_wr			= RXE_MAX_QP_WR;
+	rxe->attr.device_cap_flags		= RXE_DEVICE_CAP_FLAGS;
+	rxe->attr.kernel_cap_flags		= IBK_ALLOW_USER_UNREG;
+	rxe->attr.max_send_sge			= RXE_MAX_SGE;
+	rxe->attr.max_recv_sge			= RXE_MAX_SGE;
+	rxe->attr.max_sge_rd			= RXE_MAX_SGE_RD;
+	rxe->attr.max_cq			= RXE_MAX_CQ;
+	rxe->attr.max_cqe			= (1 << RXE_MAX_LOG_CQE) - 1;
+	rxe->attr.max_mr			= RXE_MAX_MR;
+	rxe->attr.max_mw			= RXE_MAX_MW;
+	rxe->attr.max_pd			= RXE_MAX_PD;
+	rxe->attr.max_qp_rd_atom		= RXE_MAX_QP_RD_ATOM;
+	rxe->attr.max_res_rd_atom		= RXE_MAX_RES_RD_ATOM;
+	rxe->attr.max_qp_init_rd_atom		= RXE_MAX_QP_INIT_RD_ATOM;
+	rxe->attr.atomic_cap			= IB_ATOMIC_HCA;
+	rxe->attr.max_mcast_grp			= RXE_MAX_MCAST_GRP;
+	rxe->attr.max_mcast_qp_attach		= RXE_MAX_MCAST_QP_ATTACH;
+	rxe->attr.max_total_mcast_qp_attach	= RXE_MAX_TOT_MCAST_QP_ATTACH;
+	rxe->attr.max_ah			= RXE_MAX_AH;
+	rxe->attr.max_srq			= RXE_MAX_SRQ;
+	rxe->attr.max_srq_wr			= RXE_MAX_SRQ_WR;
+	rxe->attr.max_srq_sge			= RXE_MAX_SRQ_SGE;
+	rxe->attr.max_fast_reg_page_list_len	= RXE_MAX_FMR_PAGE_LIST_LEN;
+	rxe->attr.max_pkeys			= RXE_MAX_PKEYS;
+	rxe->attr.local_ca_ack_delay		= RXE_LOCAL_CA_ACK_DELAY;
+	addrconf_addr_eui48((unsigned char *)&rxe->attr.sys_image_guid,
+			rxe->ndev->dev_addr);
+
+	rxe->max_ucontext			= RXE_MAX_UCONTEXT;
+}
+
+/* initialize port attributes */
+static void rxe_init_port_param(struct rxe_port *port)
+{
+	port->attr.state		= IB_PORT_DOWN;
+	port->attr.max_mtu		= IB_MTU_4096;
+	port->attr.active_mtu		= IB_MTU_256;
+	port->attr.gid_tbl_len		= RXE_PORT_GID_TBL_LEN;
+	port->attr.port_cap_flags	= RXE_PORT_PORT_CAP_FLAGS;
+	port->attr.max_msg_sz		= RXE_PORT_MAX_MSG_SZ;
+	port->attr.bad_pkey_cntr	= RXE_PORT_BAD_PKEY_CNTR;
+	port->attr.qkey_viol_cntr	= RXE_PORT_QKEY_VIOL_CNTR;
+	port->attr.pkey_tbl_len		= RXE_PORT_PKEY_TBL_LEN;
+	port->attr.lid			= RXE_PORT_LID;
+	port->attr.sm_lid		= RXE_PORT_SM_LID;
+	port->attr.lmc			= RXE_PORT_LMC;
+	port->attr.max_vl_num		= RXE_PORT_MAX_VL_NUM;
+	port->attr.sm_sl		= RXE_PORT_SM_SL;
+	port->attr.subnet_timeout	= RXE_PORT_SUBNET_TIMEOUT;
+	port->attr.init_type_reply	= RXE_PORT_INIT_TYPE_REPLY;
+	port->attr.active_width		= RXE_PORT_ACTIVE_WIDTH;
+	port->attr.active_speed		= RXE_PORT_ACTIVE_SPEED;
+	port->attr.phys_state		= RXE_PORT_PHYS_STATE;
+	port->mtu_cap			= ib_mtu_enum_to_int(IB_MTU_256);
+	port->subnet_prefix		= cpu_to_be64(RXE_PORT_SUBNET_PREFIX);
+}
+
+/* initialize port state, note IB convention that HCA ports are always
+ * numbered from 1
+ */
+static void rxe_init_ports(struct rxe_dev *rxe)
+{
+	struct rxe_port *port = &rxe->port;
+
+	rxe_init_port_param(port);
+	addrconf_addr_eui48((unsigned char *)&port->port_guid,
+			    rxe->ndev->dev_addr);
+	spin_lock_init(&port->port_lock);
+}
+
+/* init pools of managed objects */
+static void rxe_init_pools(struct rxe_dev *rxe)
+{
+	rxe_pool_init(rxe, &rxe->uc_pool, RXE_TYPE_UC);
+	rxe_pool_init(rxe, &rxe->pd_pool, RXE_TYPE_PD);
+	rxe_pool_init(rxe, &rxe->ah_pool, RXE_TYPE_AH);
+	rxe_pool_init(rxe, &rxe->srq_pool, RXE_TYPE_SRQ);
+	rxe_pool_init(rxe, &rxe->qp_pool, RXE_TYPE_QP);
+	rxe_pool_init(rxe, &rxe->cq_pool, RXE_TYPE_CQ);
+	rxe_pool_init(rxe, &rxe->mr_pool, RXE_TYPE_MR);
+	rxe_pool_init(rxe, &rxe->mw_pool, RXE_TYPE_MW);
+}
+
+/* initialize rxe device state */
+static void rxe_init(struct rxe_dev *rxe)
+{
+	/* init default device parameters */
+	rxe_init_device_param(rxe);
+
+	rxe_init_ports(rxe);
+	rxe_init_pools(rxe);
+
+	/* init pending mmap list */
+	spin_lock_init(&rxe->mmap_offset_lock);
+	spin_lock_init(&rxe->pending_lock);
+	INIT_LIST_HEAD(&rxe->pending_mmaps);
+
+	/* init multicast support */
+	spin_lock_init(&rxe->mcg_lock);
+	rxe->mcg_tree = RB_ROOT;
+
+	mutex_init(&rxe->usdev_lock);
+}
+
+void rxe_set_mtu(struct rxe_dev *rxe, unsigned int ndev_mtu)
+{
+	struct rxe_port *port = &rxe->port;
+	enum ib_mtu mtu;
+
+	mtu = eth_mtu_int_to_enum(ndev_mtu);
+
+	/* Make sure that new MTU in range */
+	mtu = mtu ? min_t(enum ib_mtu, mtu, IB_MTU_4096) : IB_MTU_256;
+
+	port->attr.active_mtu = mtu;
+	port->mtu_cap = ib_mtu_enum_to_int(mtu);
+}
+
+/* called by ifc layer to create new rxe device.
+ * The caller should allocate memory for rxe by calling ib_alloc_device.
+ */
+int rxe_add(struct rxe_dev *rxe, unsigned int mtu, const char *ibdev_name)
+{
+	rxe_init(rxe);
+	rxe_set_mtu(rxe, mtu);
+
+	return rxe_register_device(rxe, ibdev_name);
+}
+
+static int rxe_newlink(const char *ibdev_name, struct net_device *ndev)
+{
+	struct rxe_dev *exists;
+	int err = 0;
+
+	if (is_vlan_dev(ndev)) {
+		pr_err("rxe creation allowed on top of a real device only\n");
+		err = -EPERM;
+		goto err;
+	}
+
+	exists = rxe_get_dev_from_net(ndev);
+	if (exists) {
+		ib_device_put(&exists->ib_dev);
+		rxe_dbg(exists, "already configured on %s\n", ndev->name);
+		err = -EEXIST;
+		goto err;
+	}
+
+	err = rxe_net_add(ibdev_name, ndev);
+	if (err) {
+		rxe_dbg(exists, "failed to add %s\n", ndev->name);
+		goto err;
+	}
+err:
+	return err;
+}
+
+static struct rdma_link_ops rxe_link_ops = {
+	.type = "rxe",
+	.newlink = rxe_newlink,
+};
+
+static int __init rxe_module_init(void)
+{
+	int err;
+
+	err = rxe_net_init();
+	if (err)
+		return err;
+
+	rdma_link_register(&rxe_link_ops);
+	pr_info("loaded\n");
+	return 0;
+}
+
+static void __exit rxe_module_exit(void)
+{
+	rdma_link_unregister(&rxe_link_ops);
+	ib_unregister_driver(RDMA_DRIVER_RXE);
+	rxe_net_exit();
+
+	pr_info("unloaded\n");
+}
+
+late_initcall(rxe_module_init);
+module_exit(rxe_module_exit);
+
+MODULE_ALIAS_RDMA_LINK("rxe");