Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 426 insertions, 0 deletions

diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c
new file mode 100644
index 000000000..2c6c53290
--- /dev/null
+++ b/drivers/input/keyboard/stmpe-keypad.c
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/mfd/stmpe.h>
+
+/* These are at the same addresses in all STMPE variants */
+#define STMPE_KPC_COL			0x60
+#define STMPE_KPC_ROW_MSB		0x61
+#define STMPE_KPC_ROW_LSB		0x62
+#define STMPE_KPC_CTRL_MSB		0x63
+#define STMPE_KPC_CTRL_LSB		0x64
+#define STMPE_KPC_COMBI_KEY_0		0x65
+#define STMPE_KPC_COMBI_KEY_1		0x66
+#define STMPE_KPC_COMBI_KEY_2		0x67
+#define STMPE_KPC_DATA_BYTE0		0x68
+#define STMPE_KPC_DATA_BYTE1		0x69
+#define STMPE_KPC_DATA_BYTE2		0x6a
+#define STMPE_KPC_DATA_BYTE3		0x6b
+#define STMPE_KPC_DATA_BYTE4		0x6c
+
+#define STMPE_KPC_CTRL_LSB_SCAN		(0x1 << 0)
+#define STMPE_KPC_CTRL_LSB_DEBOUNCE	(0x7f << 1)
+#define STMPE_KPC_CTRL_MSB_SCAN_COUNT	(0xf << 4)
+
+#define STMPE_KPC_ROW_MSB_ROWS		0xff
+
+#define STMPE_KPC_DATA_UP		(0x1 << 7)
+#define STMPE_KPC_DATA_ROW		(0xf << 3)
+#define STMPE_KPC_DATA_COL		(0x7 << 0)
+#define STMPE_KPC_DATA_NOKEY_MASK	0x78
+
+#define STMPE_KEYPAD_MAX_DEBOUNCE	127
+#define STMPE_KEYPAD_MAX_SCAN_COUNT	15
+
+#define STMPE_KEYPAD_MAX_ROWS		8
+#define STMPE_KEYPAD_MAX_COLS		8
+#define STMPE_KEYPAD_ROW_SHIFT		3
+#define STMPE_KEYPAD_KEYMAP_MAX_SIZE \
+	(STMPE_KEYPAD_MAX_ROWS * STMPE_KEYPAD_MAX_COLS)
+
+
+#define STMPE1601_NUM_DATA	5
+#define STMPE2401_NUM_DATA	3
+#define STMPE2403_NUM_DATA	5
+
+/* Make sure it covers all cases above */
+#define MAX_NUM_DATA		5
+
+/**
+ * struct stmpe_keypad_variant - model-specific attributes
+ * @auto_increment: whether the KPC_DATA_BYTE register address
+ *		    auto-increments on multiple read
+ * @set_pullup: whether the pins need to have their pull-ups set
+ * @num_data: number of data bytes
+ * @num_normal_data: number of normal keys' data bytes
+ * @max_cols: maximum number of columns supported
+ * @max_rows: maximum number of rows supported
+ * @col_gpios: bitmask of gpios which can be used for columns
+ * @row_gpios: bitmask of gpios which can be used for rows
+ */
+struct stmpe_keypad_variant {
+	bool		auto_increment;
+	bool		set_pullup;
+	int		num_data;
+	int		num_normal_data;
+	int		max_cols;
+	int		max_rows;
+	unsigned int	col_gpios;
+	unsigned int	row_gpios;
+};
+
+static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
+	[STMPE1601] = {
+		.auto_increment		= true,
+		.num_data		= STMPE1601_NUM_DATA,
+		.num_normal_data	= 3,
+		.max_cols		= 8,
+		.max_rows		= 8,
+		.col_gpios		= 0x000ff,	/* GPIO 0 - 7 */
+		.row_gpios		= 0x0ff00,	/* GPIO 8 - 15 */
+	},
+	[STMPE2401] = {
+		.auto_increment		= false,
+		.set_pullup		= true,
+		.num_data		= STMPE2401_NUM_DATA,
+		.num_normal_data	= 2,
+		.max_cols		= 8,
+		.max_rows		= 12,
+		.col_gpios		= 0x0000ff,	/* GPIO 0 - 7*/
+		.row_gpios		= 0x1f7f00,	/* GPIO 8-14, 16-20 */
+	},
+	[STMPE2403] = {
+		.auto_increment		= true,
+		.set_pullup		= true,
+		.num_data		= STMPE2403_NUM_DATA,
+		.num_normal_data	= 3,
+		.max_cols		= 8,
+		.max_rows		= 12,
+		.col_gpios		= 0x0000ff,	/* GPIO 0 - 7*/
+		.row_gpios		= 0x1fef00,	/* GPIO 8-14, 16-20 */
+	},
+};
+
+/**
+ * struct stmpe_keypad - STMPE keypad state container
+ * @stmpe: pointer to parent STMPE device
+ * @input: spawned input device
+ * @variant: STMPE variant
+ * @debounce_ms: debounce interval, in ms.  Maximum is
+ *		 %STMPE_KEYPAD_MAX_DEBOUNCE.
+ * @scan_count: number of key scanning cycles to confirm key data.
+ *		Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
+ * @no_autorepeat: disable key autorepeat
+ * @rows: bitmask for the rows
+ * @cols: bitmask for the columns
+ * @keymap: the keymap
+ */
+struct stmpe_keypad {
+	struct stmpe *stmpe;
+	struct input_dev *input;
+	const struct stmpe_keypad_variant *variant;
+	unsigned int debounce_ms;
+	unsigned int scan_count;
+	bool no_autorepeat;
+	unsigned int rows;
+	unsigned int cols;
+	unsigned short keymap[STMPE_KEYPAD_KEYMAP_MAX_SIZE];
+};
+
+static int stmpe_keypad_read_data(struct stmpe_keypad *keypad, u8 *data)
+{
+	const struct stmpe_keypad_variant *variant = keypad->variant;
+	struct stmpe *stmpe = keypad->stmpe;
+	int ret;
+	int i;
+
+	if (variant->auto_increment)
+		return stmpe_block_read(stmpe, STMPE_KPC_DATA_BYTE0,
+					variant->num_data, data);
+
+	for (i = 0; i < variant->num_data; i++) {
+		ret = stmpe_reg_read(stmpe, STMPE_KPC_DATA_BYTE0 + i);
+		if (ret < 0)
+			return ret;
+
+		data[i] = ret;
+	}
+
+	return 0;
+}
+
+static irqreturn_t stmpe_keypad_irq(int irq, void *dev)
+{
+	struct stmpe_keypad *keypad = dev;
+	struct input_dev *input = keypad->input;
+	const struct stmpe_keypad_variant *variant = keypad->variant;
+	u8 fifo[MAX_NUM_DATA];
+	int ret;
+	int i;
+
+	ret = stmpe_keypad_read_data(keypad, fifo);
+	if (ret < 0)
+		return IRQ_NONE;
+
+	for (i = 0; i < variant->num_normal_data; i++) {
+		u8 data = fifo[i];
+		int row = (data & STMPE_KPC_DATA_ROW) >> 3;
+		int col = data & STMPE_KPC_DATA_COL;
+		int code = MATRIX_SCAN_CODE(row, col, STMPE_KEYPAD_ROW_SHIFT);
+		bool up = data & STMPE_KPC_DATA_UP;
+
+		if ((data & STMPE_KPC_DATA_NOKEY_MASK)
+			== STMPE_KPC_DATA_NOKEY_MASK)
+			continue;
+
+		input_event(input, EV_MSC, MSC_SCAN, code);
+		input_report_key(input, keypad->keymap[code], !up);
+		input_sync(input);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad)
+{
+	const struct stmpe_keypad_variant *variant = keypad->variant;
+	unsigned int col_gpios = variant->col_gpios;
+	unsigned int row_gpios = variant->row_gpios;
+	struct stmpe *stmpe = keypad->stmpe;
+	u8 pureg = stmpe->regs[STMPE_IDX_GPPUR_LSB];
+	unsigned int pins = 0;
+	unsigned int pu_pins = 0;
+	int ret;
+	int i;
+
+	/*
+	 * Figure out which pins need to be set to the keypad alternate
+	 * function.
+	 *
+	 * {cols,rows}_gpios are bitmasks of which pins on the chip can be used
+	 * for the keypad.
+	 *
+	 * keypad->{cols,rows} are a bitmask of which pins (of the ones useable
+	 * for the keypad) are used on the board.
+	 */
+
+	for (i = 0; i < variant->max_cols; i++) {
+		int num = __ffs(col_gpios);
+
+		if (keypad->cols & (1 << i)) {
+			pins |= 1 << num;
+			pu_pins |= 1 << num;
+		}
+
+		col_gpios &= ~(1 << num);
+	}
+
+	for (i = 0; i < variant->max_rows; i++) {
+		int num = __ffs(row_gpios);
+
+		if (keypad->rows & (1 << i))
+			pins |= 1 << num;
+
+		row_gpios &= ~(1 << num);
+	}
+
+	ret = stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD);
+	if (ret)
+		return ret;
+
+	/*
+	 * On STMPE24xx, set pin bias to pull-up on all keypad input
+	 * pins (columns), this incidentally happen to be maximum 8 pins
+	 * and placed at GPIO0-7 so only the LSB of the pull up register
+	 * ever needs to be written.
+	 */
+	if (variant->set_pullup) {
+		u8 val;
+
+		ret = stmpe_reg_read(stmpe, pureg);
+		if (ret)
+			return ret;
+
+		/* Do not touch unused pins, may be used for GPIO */
+		val = ret & ~pu_pins;
+		val |= pu_pins;
+
+		ret = stmpe_reg_write(stmpe, pureg, val);
+	}
+
+	return 0;
+}
+
+static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
+{
+	const struct stmpe_keypad_variant *variant = keypad->variant;
+	struct stmpe *stmpe = keypad->stmpe;
+	int ret;
+
+	if (keypad->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
+		return -EINVAL;
+
+	if (keypad->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
+		return -EINVAL;
+
+	ret = stmpe_enable(stmpe, STMPE_BLOCK_KEYPAD);
+	if (ret < 0)
+		return ret;
+
+	ret = stmpe_keypad_altfunc_init(keypad);
+	if (ret < 0)
+		return ret;
+
+	ret = stmpe_reg_write(stmpe, STMPE_KPC_COL, keypad->cols);
+	if (ret < 0)
+		return ret;
+
+	ret = stmpe_reg_write(stmpe, STMPE_KPC_ROW_LSB, keypad->rows);
+	if (ret < 0)
+		return ret;
+
+	if (variant->max_rows > 8) {
+		ret = stmpe_set_bits(stmpe, STMPE_KPC_ROW_MSB,
+				     STMPE_KPC_ROW_MSB_ROWS,
+				     keypad->rows >> 8);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = stmpe_set_bits(stmpe, STMPE_KPC_CTRL_MSB,
+			     STMPE_KPC_CTRL_MSB_SCAN_COUNT,
+			     keypad->scan_count << 4);
+	if (ret < 0)
+		return ret;
+
+	return stmpe_set_bits(stmpe, STMPE_KPC_CTRL_LSB,
+			      STMPE_KPC_CTRL_LSB_SCAN |
+			      STMPE_KPC_CTRL_LSB_DEBOUNCE,
+			      STMPE_KPC_CTRL_LSB_SCAN |
+			      (keypad->debounce_ms << 1));
+}
+
+static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad,
+					u32 used_rows, u32 used_cols)
+{
+	int row, col;
+
+	for (row = 0; row < used_rows; row++) {
+		for (col = 0; col < used_cols; col++) {
+			int code = MATRIX_SCAN_CODE(row, col,
+						    STMPE_KEYPAD_ROW_SHIFT);
+			if (keypad->keymap[code] != KEY_RESERVED) {
+				keypad->rows |= 1 << row;
+				keypad->cols |= 1 << col;
+			}
+		}
+	}
+}
+
+static int stmpe_keypad_probe(struct platform_device *pdev)
+{
+	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
+	struct device_node *np = pdev->dev.of_node;
+	struct stmpe_keypad *keypad;
+	struct input_dev *input;
+	u32 rows;
+	u32 cols;
+	int error;
+	int irq;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	keypad = devm_kzalloc(&pdev->dev, sizeof(struct stmpe_keypad),
+			      GFP_KERNEL);
+	if (!keypad)
+		return -ENOMEM;
+
+	keypad->stmpe = stmpe;
+	keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
+
+	of_property_read_u32(np, "debounce-interval", &keypad->debounce_ms);
+	of_property_read_u32(np, "st,scan-count", &keypad->scan_count);
+	keypad->no_autorepeat = of_property_read_bool(np, "st,no-autorepeat");
+
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input)
+		return -ENOMEM;
+
+	input->name = "STMPE keypad";
+	input->id.bustype = BUS_I2C;
+	input->dev.parent = &pdev->dev;
+
+	error = matrix_keypad_parse_properties(&pdev->dev, &rows, &cols);
+	if (error)
+		return error;
+
+	error = matrix_keypad_build_keymap(NULL, NULL, rows, cols,
+					   keypad->keymap, input);
+	if (error)
+		return error;
+
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+	if (!keypad->no_autorepeat)
+		__set_bit(EV_REP, input->evbit);
+
+	stmpe_keypad_fill_used_pins(keypad, rows, cols);
+
+	keypad->input = input;
+
+	error = stmpe_keypad_chip_init(keypad);
+	if (error < 0)
+		return error;
+
+	error = devm_request_threaded_irq(&pdev->dev, irq,
+					  NULL, stmpe_keypad_irq,
+					  IRQF_ONESHOT, "stmpe-keypad", keypad);
+	if (error) {
+		dev_err(&pdev->dev, "unable to get irq: %d\n", error);
+		return error;
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&pdev->dev,
+			"unable to register input device: %d\n", error);
+		return error;
+	}
+
+	platform_set_drvdata(pdev, keypad);
+
+	return 0;
+}
+
+static int stmpe_keypad_remove(struct platform_device *pdev)
+{
+	struct stmpe_keypad *keypad = platform_get_drvdata(pdev);
+
+	stmpe_disable(keypad->stmpe, STMPE_BLOCK_KEYPAD);
+
+	return 0;
+}
+
+static struct platform_driver stmpe_keypad_driver = {
+	.driver.name	= "stmpe-keypad",
+	.driver.owner	= THIS_MODULE,
+	.probe		= stmpe_keypad_probe,
+	.remove		= stmpe_keypad_remove,
+};
+module_platform_driver(stmpe_keypad_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("STMPExxxx keypad driver");
+MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>");