Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1826 insertions, 0 deletions

diff --git a/drivers/input/misc/iqs269a.c b/drivers/input/misc/iqs269a.c
new file mode 100644
index 000000000..a348247d3
--- /dev/null
+++ b/drivers/input/misc/iqs269a.c
@@ -0,0 +1,1826 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS269A Capacitive Touch Controller
+ *
+ * Copyright (C) 2020 Jeff LaBundy <jeff@labundy.com>
+ *
+ * This driver registers up to 3 input devices: one representing capacitive or
+ * inductive keys as well as Hall-effect switches, and one for each of the two
+ * axial sliders presented by the device.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define IQS269_VER_INFO				0x00
+#define IQS269_VER_INFO_PROD_NUM		0x4F
+
+#define IQS269_SYS_FLAGS			0x02
+#define IQS269_SYS_FLAGS_SHOW_RESET		BIT(15)
+#define IQS269_SYS_FLAGS_PWR_MODE_MASK		GENMASK(12, 11)
+#define IQS269_SYS_FLAGS_PWR_MODE_SHIFT		11
+#define IQS269_SYS_FLAGS_IN_ATI			BIT(10)
+
+#define IQS269_CHx_COUNTS			0x08
+
+#define IQS269_SLIDER_X				0x30
+
+#define IQS269_CAL_DATA_A			0x35
+#define IQS269_CAL_DATA_A_HALL_BIN_L_MASK	GENMASK(15, 12)
+#define IQS269_CAL_DATA_A_HALL_BIN_L_SHIFT	12
+#define IQS269_CAL_DATA_A_HALL_BIN_R_MASK	GENMASK(11, 8)
+#define IQS269_CAL_DATA_A_HALL_BIN_R_SHIFT	8
+
+#define IQS269_SYS_SETTINGS			0x80
+#define IQS269_SYS_SETTINGS_CLK_DIV		BIT(15)
+#define IQS269_SYS_SETTINGS_ULP_AUTO		BIT(14)
+#define IQS269_SYS_SETTINGS_DIS_AUTO		BIT(13)
+#define IQS269_SYS_SETTINGS_PWR_MODE_MASK	GENMASK(12, 11)
+#define IQS269_SYS_SETTINGS_PWR_MODE_SHIFT	11
+#define IQS269_SYS_SETTINGS_PWR_MODE_MAX	3
+#define IQS269_SYS_SETTINGS_ULP_UPDATE_MASK	GENMASK(10, 8)
+#define IQS269_SYS_SETTINGS_ULP_UPDATE_SHIFT	8
+#define IQS269_SYS_SETTINGS_ULP_UPDATE_MAX	7
+#define IQS269_SYS_SETTINGS_RESEED_OFFSET	BIT(6)
+#define IQS269_SYS_SETTINGS_EVENT_MODE		BIT(5)
+#define IQS269_SYS_SETTINGS_EVENT_MODE_LP	BIT(4)
+#define IQS269_SYS_SETTINGS_REDO_ATI		BIT(2)
+#define IQS269_SYS_SETTINGS_ACK_RESET		BIT(0)
+
+#define IQS269_FILT_STR_LP_LTA_MASK		GENMASK(7, 6)
+#define IQS269_FILT_STR_LP_LTA_SHIFT		6
+#define IQS269_FILT_STR_LP_CNT_MASK		GENMASK(5, 4)
+#define IQS269_FILT_STR_LP_CNT_SHIFT		4
+#define IQS269_FILT_STR_NP_LTA_MASK		GENMASK(3, 2)
+#define IQS269_FILT_STR_NP_LTA_SHIFT		2
+#define IQS269_FILT_STR_NP_CNT_MASK		GENMASK(1, 0)
+#define IQS269_FILT_STR_MAX			3
+
+#define IQS269_EVENT_MASK_SYS			BIT(6)
+#define IQS269_EVENT_MASK_DEEP			BIT(2)
+#define IQS269_EVENT_MASK_TOUCH			BIT(1)
+#define IQS269_EVENT_MASK_PROX			BIT(0)
+
+#define IQS269_RATE_NP_MS_MAX			255
+#define IQS269_RATE_LP_MS_MAX			255
+#define IQS269_RATE_ULP_MS_MAX			4080
+#define IQS269_TIMEOUT_PWR_MS_MAX		130560
+#define IQS269_TIMEOUT_LTA_MS_MAX		130560
+
+#define IQS269_MISC_A_ATI_BAND_DISABLE		BIT(15)
+#define IQS269_MISC_A_ATI_LP_ONLY		BIT(14)
+#define IQS269_MISC_A_ATI_BAND_TIGHTEN		BIT(13)
+#define IQS269_MISC_A_FILT_DISABLE		BIT(12)
+#define IQS269_MISC_A_GPIO3_SELECT_MASK		GENMASK(10, 8)
+#define IQS269_MISC_A_GPIO3_SELECT_SHIFT	8
+#define IQS269_MISC_A_DUAL_DIR			BIT(6)
+#define IQS269_MISC_A_TX_FREQ_MASK		GENMASK(5, 4)
+#define IQS269_MISC_A_TX_FREQ_SHIFT		4
+#define IQS269_MISC_A_TX_FREQ_MAX		3
+#define IQS269_MISC_A_GLOBAL_CAP_SIZE		BIT(0)
+
+#define IQS269_MISC_B_RESEED_UI_SEL_MASK	GENMASK(7, 6)
+#define IQS269_MISC_B_RESEED_UI_SEL_SHIFT	6
+#define IQS269_MISC_B_RESEED_UI_SEL_MAX		3
+#define IQS269_MISC_B_TRACKING_UI_ENABLE	BIT(4)
+#define IQS269_MISC_B_FILT_STR_SLIDER		GENMASK(1, 0)
+
+#define IQS269_CHx_SETTINGS			0x8C
+
+#define IQS269_CHx_ENG_A_MEAS_CAP_SIZE		BIT(15)
+#define IQS269_CHx_ENG_A_RX_GND_INACTIVE	BIT(13)
+#define IQS269_CHx_ENG_A_LOCAL_CAP_SIZE		BIT(12)
+#define IQS269_CHx_ENG_A_ATI_MODE_MASK		GENMASK(9, 8)
+#define IQS269_CHx_ENG_A_ATI_MODE_SHIFT		8
+#define IQS269_CHx_ENG_A_ATI_MODE_MAX		3
+#define IQS269_CHx_ENG_A_INV_LOGIC		BIT(7)
+#define IQS269_CHx_ENG_A_PROJ_BIAS_MASK		GENMASK(6, 5)
+#define IQS269_CHx_ENG_A_PROJ_BIAS_SHIFT	5
+#define IQS269_CHx_ENG_A_PROJ_BIAS_MAX		3
+#define IQS269_CHx_ENG_A_SENSE_MODE_MASK	GENMASK(3, 0)
+#define IQS269_CHx_ENG_A_SENSE_MODE_MAX		15
+
+#define IQS269_CHx_ENG_B_LOCAL_CAP_ENABLE	BIT(13)
+#define IQS269_CHx_ENG_B_SENSE_FREQ_MASK	GENMASK(10, 9)
+#define IQS269_CHx_ENG_B_SENSE_FREQ_SHIFT	9
+#define IQS269_CHx_ENG_B_SENSE_FREQ_MAX		3
+#define IQS269_CHx_ENG_B_STATIC_ENABLE		BIT(8)
+#define IQS269_CHx_ENG_B_ATI_BASE_MASK		GENMASK(7, 6)
+#define IQS269_CHx_ENG_B_ATI_BASE_75		0x00
+#define IQS269_CHx_ENG_B_ATI_BASE_100		0x40
+#define IQS269_CHx_ENG_B_ATI_BASE_150		0x80
+#define IQS269_CHx_ENG_B_ATI_BASE_200		0xC0
+#define IQS269_CHx_ENG_B_ATI_TARGET_MASK	GENMASK(5, 0)
+#define IQS269_CHx_ENG_B_ATI_TARGET_MAX		2016
+
+#define IQS269_CHx_WEIGHT_MAX			255
+#define IQS269_CHx_THRESH_MAX			255
+#define IQS269_CHx_HYST_DEEP_MASK		GENMASK(7, 4)
+#define IQS269_CHx_HYST_DEEP_SHIFT		4
+#define IQS269_CHx_HYST_TOUCH_MASK		GENMASK(3, 0)
+#define IQS269_CHx_HYST_MAX			15
+
+#define IQS269_CHx_HALL_INACTIVE		6
+#define IQS269_CHx_HALL_ACTIVE			7
+
+#define IQS269_HALL_PAD_R			BIT(0)
+#define IQS269_HALL_PAD_L			BIT(1)
+#define IQS269_HALL_PAD_INV			BIT(6)
+
+#define IQS269_HALL_UI				0xF5
+#define IQS269_HALL_UI_ENABLE			BIT(15)
+
+#define IQS269_MAX_REG				0xFF
+
+#define IQS269_NUM_CH				8
+#define IQS269_NUM_SL				2
+
+#define IQS269_ATI_POLL_SLEEP_US		(iqs269->delay_mult * 10000)
+#define IQS269_ATI_POLL_TIMEOUT_US		(iqs269->delay_mult * 500000)
+#define IQS269_ATI_STABLE_DELAY_MS		(iqs269->delay_mult * 150)
+
+#define IQS269_PWR_MODE_POLL_SLEEP_US		IQS269_ATI_POLL_SLEEP_US
+#define IQS269_PWR_MODE_POLL_TIMEOUT_US		IQS269_ATI_POLL_TIMEOUT_US
+
+#define iqs269_irq_wait()			usleep_range(100, 150)
+
+enum iqs269_local_cap_size {
+	IQS269_LOCAL_CAP_SIZE_0,
+	IQS269_LOCAL_CAP_SIZE_GLOBAL_ONLY,
+	IQS269_LOCAL_CAP_SIZE_GLOBAL_0pF5,
+};
+
+enum iqs269_st_offs {
+	IQS269_ST_OFFS_PROX,
+	IQS269_ST_OFFS_DIR,
+	IQS269_ST_OFFS_TOUCH,
+	IQS269_ST_OFFS_DEEP,
+};
+
+enum iqs269_th_offs {
+	IQS269_TH_OFFS_PROX,
+	IQS269_TH_OFFS_TOUCH,
+	IQS269_TH_OFFS_DEEP,
+};
+
+enum iqs269_event_id {
+	IQS269_EVENT_PROX_DN,
+	IQS269_EVENT_PROX_UP,
+	IQS269_EVENT_TOUCH_DN,
+	IQS269_EVENT_TOUCH_UP,
+	IQS269_EVENT_DEEP_DN,
+	IQS269_EVENT_DEEP_UP,
+};
+
+struct iqs269_switch_desc {
+	unsigned int code;
+	bool enabled;
+};
+
+struct iqs269_event_desc {
+	const char *name;
+	enum iqs269_st_offs st_offs;
+	enum iqs269_th_offs th_offs;
+	bool dir_up;
+	u8 mask;
+};
+
+static const struct iqs269_event_desc iqs269_events[] = {
+	[IQS269_EVENT_PROX_DN] = {
+		.name = "event-prox",
+		.st_offs = IQS269_ST_OFFS_PROX,
+		.th_offs = IQS269_TH_OFFS_PROX,
+		.mask = IQS269_EVENT_MASK_PROX,
+	},
+	[IQS269_EVENT_PROX_UP] = {
+		.name = "event-prox-alt",
+		.st_offs = IQS269_ST_OFFS_PROX,
+		.th_offs = IQS269_TH_OFFS_PROX,
+		.dir_up = true,
+		.mask = IQS269_EVENT_MASK_PROX,
+	},
+	[IQS269_EVENT_TOUCH_DN] = {
+		.name = "event-touch",
+		.st_offs = IQS269_ST_OFFS_TOUCH,
+		.th_offs = IQS269_TH_OFFS_TOUCH,
+		.mask = IQS269_EVENT_MASK_TOUCH,
+	},
+	[IQS269_EVENT_TOUCH_UP] = {
+		.name = "event-touch-alt",
+		.st_offs = IQS269_ST_OFFS_TOUCH,
+		.th_offs = IQS269_TH_OFFS_TOUCH,
+		.dir_up = true,
+		.mask = IQS269_EVENT_MASK_TOUCH,
+	},
+	[IQS269_EVENT_DEEP_DN] = {
+		.name = "event-deep",
+		.st_offs = IQS269_ST_OFFS_DEEP,
+		.th_offs = IQS269_TH_OFFS_DEEP,
+		.mask = IQS269_EVENT_MASK_DEEP,
+	},
+	[IQS269_EVENT_DEEP_UP] = {
+		.name = "event-deep-alt",
+		.st_offs = IQS269_ST_OFFS_DEEP,
+		.th_offs = IQS269_TH_OFFS_DEEP,
+		.dir_up = true,
+		.mask = IQS269_EVENT_MASK_DEEP,
+	},
+};
+
+struct iqs269_ver_info {
+	u8 prod_num;
+	u8 sw_num;
+	u8 hw_num;
+	u8 padding;
+} __packed;
+
+struct iqs269_sys_reg {
+	__be16 general;
+	u8 active;
+	u8 filter;
+	u8 reseed;
+	u8 event_mask;
+	u8 rate_np;
+	u8 rate_lp;
+	u8 rate_ulp;
+	u8 timeout_pwr;
+	u8 timeout_rdy;
+	u8 timeout_lta;
+	__be16 misc_a;
+	__be16 misc_b;
+	u8 blocking;
+	u8 padding;
+	u8 slider_select[IQS269_NUM_SL];
+	u8 timeout_tap;
+	u8 timeout_swipe;
+	u8 thresh_swipe;
+	u8 redo_ati;
+} __packed;
+
+struct iqs269_ch_reg {
+	u8 rx_enable;
+	u8 tx_enable;
+	__be16 engine_a;
+	__be16 engine_b;
+	__be16 ati_comp;
+	u8 thresh[3];
+	u8 hyst;
+	u8 assoc_select;
+	u8 assoc_weight;
+} __packed;
+
+struct iqs269_flags {
+	__be16 system;
+	u8 gesture;
+	u8 padding;
+	u8 states[4];
+} __packed;
+
+struct iqs269_private {
+	struct i2c_client *client;
+	struct regmap *regmap;
+	struct mutex lock;
+	struct iqs269_switch_desc switches[ARRAY_SIZE(iqs269_events)];
+	struct iqs269_ch_reg ch_reg[IQS269_NUM_CH];
+	struct iqs269_sys_reg sys_reg;
+	struct input_dev *keypad;
+	struct input_dev *slider[IQS269_NUM_SL];
+	unsigned int keycode[ARRAY_SIZE(iqs269_events) * IQS269_NUM_CH];
+	unsigned int suspend_mode;
+	unsigned int delay_mult;
+	unsigned int ch_num;
+	bool hall_enable;
+	bool ati_current;
+};
+
+static int iqs269_ati_mode_set(struct iqs269_private *iqs269,
+			       unsigned int ch_num, unsigned int mode)
+{
+	u16 engine_a;
+
+	if (ch_num >= IQS269_NUM_CH)
+		return -EINVAL;
+
+	if (mode > IQS269_CHx_ENG_A_ATI_MODE_MAX)
+		return -EINVAL;
+
+	mutex_lock(&iqs269->lock);
+
+	engine_a = be16_to_cpu(iqs269->ch_reg[ch_num].engine_a);
+
+	engine_a &= ~IQS269_CHx_ENG_A_ATI_MODE_MASK;
+	engine_a |= (mode << IQS269_CHx_ENG_A_ATI_MODE_SHIFT);
+
+	iqs269->ch_reg[ch_num].engine_a = cpu_to_be16(engine_a);
+	iqs269->ati_current = false;
+
+	mutex_unlock(&iqs269->lock);
+
+	return 0;
+}
+
+static int iqs269_ati_mode_get(struct iqs269_private *iqs269,
+			       unsigned int ch_num, unsigned int *mode)
+{
+	u16 engine_a;
+
+	if (ch_num >= IQS269_NUM_CH)
+		return -EINVAL;
+
+	mutex_lock(&iqs269->lock);
+	engine_a = be16_to_cpu(iqs269->ch_reg[ch_num].engine_a);
+	mutex_unlock(&iqs269->lock);
+
+	engine_a &= IQS269_CHx_ENG_A_ATI_MODE_MASK;
+	*mode = (engine_a >> IQS269_CHx_ENG_A_ATI_MODE_SHIFT);
+
+	return 0;
+}
+
+static int iqs269_ati_base_set(struct iqs269_private *iqs269,
+			       unsigned int ch_num, unsigned int base)
+{
+	u16 engine_b;
+
+	if (ch_num >= IQS269_NUM_CH)
+		return -EINVAL;
+
+	switch (base) {
+	case 75:
+		base = IQS269_CHx_ENG_B_ATI_BASE_75;
+		break;
+
+	case 100:
+		base = IQS269_CHx_ENG_B_ATI_BASE_100;
+		break;
+
+	case 150:
+		base = IQS269_CHx_ENG_B_ATI_BASE_150;
+		break;
+
+	case 200:
+		base = IQS269_CHx_ENG_B_ATI_BASE_200;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	mutex_lock(&iqs269->lock);
+
+	engine_b = be16_to_cpu(iqs269->ch_reg[ch_num].engine_b);
+
+	engine_b &= ~IQS269_CHx_ENG_B_ATI_BASE_MASK;
+	engine_b |= base;
+
+	iqs269->ch_reg[ch_num].engine_b = cpu_to_be16(engine_b);
+	iqs269->ati_current = false;
+
+	mutex_unlock(&iqs269->lock);
+
+	return 0;
+}
+
+static int iqs269_ati_base_get(struct iqs269_private *iqs269,
+			       unsigned int ch_num, unsigned int *base)
+{
+	u16 engine_b;
+
+	if (ch_num >= IQS269_NUM_CH)
+		return -EINVAL;
+
+	mutex_lock(&iqs269->lock);
+	engine_b = be16_to_cpu(iqs269->ch_reg[ch_num].engine_b);
+	mutex_unlock(&iqs269->lock);
+
+	switch (engine_b & IQS269_CHx_ENG_B_ATI_BASE_MASK) {
+	case IQS269_CHx_ENG_B_ATI_BASE_75:
+		*base = 75;
+		return 0;
+
+	case IQS269_CHx_ENG_B_ATI_BASE_100:
+		*base = 100;
+		return 0;
+
+	case IQS269_CHx_ENG_B_ATI_BASE_150:
+		*base = 150;
+		return 0;
+
+	case IQS269_CHx_ENG_B_ATI_BASE_200:
+		*base = 200;
+		return 0;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int iqs269_ati_target_set(struct iqs269_private *iqs269,
+				 unsigned int ch_num, unsigned int target)
+{
+	u16 engine_b;
+
+	if (ch_num >= IQS269_NUM_CH)
+		return -EINVAL;
+
+	if (target > IQS269_CHx_ENG_B_ATI_TARGET_MAX)
+		return -EINVAL;
+
+	mutex_lock(&iqs269->lock);
+
+	engine_b = be16_to_cpu(iqs269->ch_reg[ch_num].engine_b);
+
+	engine_b &= ~IQS269_CHx_ENG_B_ATI_TARGET_MASK;
+	engine_b |= target / 32;
+
+	iqs269->ch_reg[ch_num].engine_b = cpu_to_be16(engine_b);
+	iqs269->ati_current = false;
+
+	mutex_unlock(&iqs269->lock);
+
+	return 0;
+}
+
+static int iqs269_ati_target_get(struct iqs269_private *iqs269,
+				 unsigned int ch_num, unsigned int *target)
+{
+	u16 engine_b;
+
+	if (ch_num >= IQS269_NUM_CH)
+		return -EINVAL;
+
+	mutex_lock(&iqs269->lock);
+	engine_b = be16_to_cpu(iqs269->ch_reg[ch_num].engine_b);
+	mutex_unlock(&iqs269->lock);
+
+	*target = (engine_b & IQS269_CHx_ENG_B_ATI_TARGET_MASK) * 32;
+
+	return 0;
+}
+
+static int iqs269_parse_mask(const struct fwnode_handle *fwnode,
+			     const char *propname, u8 *mask)
+{
+	unsigned int val[IQS269_NUM_CH];
+	int count, error, i;
+
+	count = fwnode_property_count_u32(fwnode, propname);
+	if (count < 0)
+		return 0;
+
+	if (count > IQS269_NUM_CH)
+		return -EINVAL;
+
+	error = fwnode_property_read_u32_array(fwnode, propname, val, count);
+	if (error)
+		return error;
+
+	*mask = 0;
+
+	for (i = 0; i < count; i++) {
+		if (val[i] >= IQS269_NUM_CH)
+			return -EINVAL;
+
+		*mask |= BIT(val[i]);
+	}
+
+	return 0;
+}
+
+static int iqs269_parse_chan(struct iqs269_private *iqs269,
+			     const struct fwnode_handle *ch_node)
+{
+	struct i2c_client *client = iqs269->client;
+	struct fwnode_handle *ev_node;
+	struct iqs269_ch_reg *ch_reg;
+	u16 engine_a, engine_b;
+	unsigned int reg, val;
+	int error, i;
+
+	error = fwnode_property_read_u32(ch_node, "reg", &reg);
+	if (error) {
+		dev_err(&client->dev, "Failed to read channel number: %d\n",
+			error);
+		return error;
+	} else if (reg >= IQS269_NUM_CH) {
+		dev_err(&client->dev, "Invalid channel number: %u\n", reg);
+		return -EINVAL;
+	}
+
+	iqs269->sys_reg.active |= BIT(reg);
+	if (!fwnode_property_present(ch_node, "azoteq,reseed-disable"))
+		iqs269->sys_reg.reseed |= BIT(reg);
+
+	if (fwnode_property_present(ch_node, "azoteq,blocking-enable"))
+		iqs269->sys_reg.blocking |= BIT(reg);
+
+	if (fwnode_property_present(ch_node, "azoteq,slider0-select"))
+		iqs269->sys_reg.slider_select[0] |= BIT(reg);
+
+	if (fwnode_property_present(ch_node, "azoteq,slider1-select"))
+		iqs269->sys_reg.slider_select[1] |= BIT(reg);
+
+	ch_reg = &iqs269->ch_reg[reg];
+
+	error = regmap_raw_read(iqs269->regmap,
+				IQS269_CHx_SETTINGS + reg * sizeof(*ch_reg) / 2,
+				ch_reg, sizeof(*ch_reg));
+	if (error)
+		return error;
+
+	error = iqs269_parse_mask(ch_node, "azoteq,rx-enable",
+				  &ch_reg->rx_enable);
+	if (error) {
+		dev_err(&client->dev, "Invalid channel %u RX enable mask: %d\n",
+			reg, error);
+		return error;
+	}
+
+	error = iqs269_parse_mask(ch_node, "azoteq,tx-enable",
+				  &ch_reg->tx_enable);
+	if (error) {
+		dev_err(&client->dev, "Invalid channel %u TX enable mask: %d\n",
+			reg, error);
+		return error;
+	}
+
+	engine_a = be16_to_cpu(ch_reg->engine_a);
+	engine_b = be16_to_cpu(ch_reg->engine_b);
+
+	engine_a |= IQS269_CHx_ENG_A_MEAS_CAP_SIZE;
+	if (fwnode_property_present(ch_node, "azoteq,meas-cap-decrease"))
+		engine_a &= ~IQS269_CHx_ENG_A_MEAS_CAP_SIZE;
+
+	engine_a |= IQS269_CHx_ENG_A_RX_GND_INACTIVE;
+	if (fwnode_property_present(ch_node, "azoteq,rx-float-inactive"))
+		engine_a &= ~IQS269_CHx_ENG_A_RX_GND_INACTIVE;
+
+	engine_a &= ~IQS269_CHx_ENG_A_LOCAL_CAP_SIZE;
+	engine_b &= ~IQS269_CHx_ENG_B_LOCAL_CAP_ENABLE;
+	if (!fwnode_property_read_u32(ch_node, "azoteq,local-cap-size", &val)) {
+		switch (val) {
+		case IQS269_LOCAL_CAP_SIZE_0:
+			break;
+
+		case IQS269_LOCAL_CAP_SIZE_GLOBAL_0pF5:
+			engine_a |= IQS269_CHx_ENG_A_LOCAL_CAP_SIZE;
+			fallthrough;
+
+		case IQS269_LOCAL_CAP_SIZE_GLOBAL_ONLY:
+			engine_b |= IQS269_CHx_ENG_B_LOCAL_CAP_ENABLE;
+			break;
+
+		default:
+			dev_err(&client->dev,
+				"Invalid channel %u local cap. size: %u\n", reg,
+				val);
+			return -EINVAL;
+		}
+	}
+
+	engine_a &= ~IQS269_CHx_ENG_A_INV_LOGIC;
+	if (fwnode_property_present(ch_node, "azoteq,invert-enable"))
+		engine_a |= IQS269_CHx_ENG_A_INV_LOGIC;
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,proj-bias", &val)) {
+		if (val > IQS269_CHx_ENG_A_PROJ_BIAS_MAX) {
+			dev_err(&client->dev,
+				"Invalid channel %u bias current: %u\n", reg,
+				val);
+			return -EINVAL;
+		}
+
+		engine_a &= ~IQS269_CHx_ENG_A_PROJ_BIAS_MASK;
+		engine_a |= (val << IQS269_CHx_ENG_A_PROJ_BIAS_SHIFT);
+	}
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,sense-mode", &val)) {
+		if (val > IQS269_CHx_ENG_A_SENSE_MODE_MAX) {
+			dev_err(&client->dev,
+				"Invalid channel %u sensing mode: %u\n", reg,
+				val);
+			return -EINVAL;
+		}
+
+		engine_a &= ~IQS269_CHx_ENG_A_SENSE_MODE_MASK;
+		engine_a |= val;
+	}
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,sense-freq", &val)) {
+		if (val > IQS269_CHx_ENG_B_SENSE_FREQ_MAX) {
+			dev_err(&client->dev,
+				"Invalid channel %u sensing frequency: %u\n",
+				reg, val);
+			return -EINVAL;
+		}
+
+		engine_b &= ~IQS269_CHx_ENG_B_SENSE_FREQ_MASK;
+		engine_b |= (val << IQS269_CHx_ENG_B_SENSE_FREQ_SHIFT);
+	}
+
+	engine_b &= ~IQS269_CHx_ENG_B_STATIC_ENABLE;
+	if (fwnode_property_present(ch_node, "azoteq,static-enable"))
+		engine_b |= IQS269_CHx_ENG_B_STATIC_ENABLE;
+
+	ch_reg->engine_a = cpu_to_be16(engine_a);
+	ch_reg->engine_b = cpu_to_be16(engine_b);
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,ati-mode", &val)) {
+		error = iqs269_ati_mode_set(iqs269, reg, val);
+		if (error) {
+			dev_err(&client->dev,
+				"Invalid channel %u ATI mode: %u\n", reg, val);
+			return error;
+		}
+	}
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,ati-base", &val)) {
+		error = iqs269_ati_base_set(iqs269, reg, val);
+		if (error) {
+			dev_err(&client->dev,
+				"Invalid channel %u ATI base: %u\n", reg, val);
+			return error;
+		}
+	}
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,ati-target", &val)) {
+		error = iqs269_ati_target_set(iqs269, reg, val);
+		if (error) {
+			dev_err(&client->dev,
+				"Invalid channel %u ATI target: %u\n", reg,
+				val);
+			return error;
+		}
+	}
+
+	error = iqs269_parse_mask(ch_node, "azoteq,assoc-select",
+				  &ch_reg->assoc_select);
+	if (error) {
+		dev_err(&client->dev, "Invalid channel %u association: %d\n",
+			reg, error);
+		return error;
+	}
+
+	if (!fwnode_property_read_u32(ch_node, "azoteq,assoc-weight", &val)) {
+		if (val > IQS269_CHx_WEIGHT_MAX) {
+			dev_err(&client->dev,
+				"Invalid channel %u associated weight: %u\n",
+				reg, val);
+			return -EINVAL;
+		}
+
+		ch_reg->assoc_weight = val;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(iqs269_events); i++) {
+		ev_node = fwnode_get_named_child_node(ch_node,
+						      iqs269_events[i].name);
+		if (!ev_node)
+			continue;
+
+		if (!fwnode_property_read_u32(ev_node, "azoteq,thresh", &val)) {
+			if (val > IQS269_CHx_THRESH_MAX) {
+				dev_err(&client->dev,
+					"Invalid channel %u threshold: %u\n",
+					reg, val);
+				return -EINVAL;
+			}
+
+			ch_reg->thresh[iqs269_events[i].th_offs] = val;
+		}
+
+		if (!fwnode_property_read_u32(ev_node, "azoteq,hyst", &val)) {
+			u8 *hyst = &ch_reg->hyst;
+
+			if (val > IQS269_CHx_HYST_MAX) {
+				dev_err(&client->dev,
+					"Invalid channel %u hysteresis: %u\n",
+					reg, val);
+				return -EINVAL;
+			}
+
+			if (i == IQS269_EVENT_DEEP_DN ||
+			    i == IQS269_EVENT_DEEP_UP) {
+				*hyst &= ~IQS269_CHx_HYST_DEEP_MASK;
+				*hyst |= (val << IQS269_CHx_HYST_DEEP_SHIFT);
+			} else if (i == IQS269_EVENT_TOUCH_DN ||
+				   i == IQS269_EVENT_TOUCH_UP) {
+				*hyst &= ~IQS269_CHx_HYST_TOUCH_MASK;
+				*hyst |= val;
+			}
+		}
+
+		if (fwnode_property_read_u32(ev_node, "linux,code", &val))
+			continue;
+
+		switch (reg) {
+		case IQS269_CHx_HALL_ACTIVE:
+			if (iqs269->hall_enable) {
+				iqs269->switches[i].code = val;
+				iqs269->switches[i].enabled = true;
+			}
+			fallthrough;
+
+		case IQS269_CHx_HALL_INACTIVE:
+			if (iqs269->hall_enable)
+				break;
+			fallthrough;
+
+		default:
+			iqs269->keycode[i * IQS269_NUM_CH + reg] = val;
+		}
+
+		iqs269->sys_reg.event_mask &= ~iqs269_events[i].mask;
+	}
+
+	return 0;
+}
+
+static int iqs269_parse_prop(struct iqs269_private *iqs269)
+{
+	struct iqs269_sys_reg *sys_reg = &iqs269->sys_reg;
+	struct i2c_client *client = iqs269->client;
+	struct fwnode_handle *ch_node;
+	u16 general, misc_a, misc_b;
+	unsigned int val;
+	int error;
+
+	iqs269->hall_enable = device_property_present(&client->dev,
+						      "azoteq,hall-enable");
+
+	if (!device_property_read_u32(&client->dev, "azoteq,suspend-mode",
+				      &val)) {
+		if (val > IQS269_SYS_SETTINGS_PWR_MODE_MAX) {
+			dev_err(&client->dev, "Invalid suspend mode: %u\n",
+				val);
+			return -EINVAL;
+		}
+
+		iqs269->suspend_mode = val;
+	}
+
+	error = regmap_raw_read(iqs269->regmap, IQS269_SYS_SETTINGS, sys_reg,
+				sizeof(*sys_reg));
+	if (error)
+		return error;
+
+	if (!device_property_read_u32(&client->dev, "azoteq,filt-str-lp-lta",
+				      &val)) {
+		if (val > IQS269_FILT_STR_MAX) {
+			dev_err(&client->dev, "Invalid filter strength: %u\n",
+				val);
+			return -EINVAL;
+		}
+
+		sys_reg->filter &= ~IQS269_FILT_STR_LP_LTA_MASK;
+		sys_reg->filter |= (val << IQS269_FILT_STR_LP_LTA_SHIFT);
+	}
+
+	if (!device_property_read_u32(&client->dev, "azoteq,filt-str-lp-cnt",
+				      &val)) {
+		if (val > IQS269_FILT_STR_MAX) {
+			dev_err(&client->dev, "Invalid filter strength: %u\n",
+				val);
+			return -EINVAL;
+		}
+
+		sys_reg->filter &= ~IQS269_FILT_STR_LP_CNT_MASK;
+		sys_reg->filter |= (val << IQS269_FILT_STR_LP_CNT_SHIFT);
+	}
+
+	if (!device_property_read_u32(&client->dev, "azoteq,filt-str-np-lta",
+				      &val)) {
+		if (val > IQS269_FILT_STR_MAX) {
+			dev_err(&client->dev, "Invalid filter strength: %u\n",
+				val);
+			return -EINVAL;
+		}
+
+		sys_reg->filter &= ~IQS269_FILT_STR_NP_LTA_MASK;
+		sys_reg->filter |= (val << IQS269_FILT_STR_NP_LTA_SHIFT);
+	}
+
+	if (!device_property_read_u32(&client->dev, "azoteq,filt-str-np-cnt",
+				      &val)) {
+		if (val > IQS269_FILT_STR_MAX) {
+			dev_err(&client->dev, "Invalid filter strength: %u\n",
+				val);
+			return -EINVAL;
+		}
+
+		sys_reg->filter &= ~IQS269_FILT_STR_NP_CNT_MASK;
+		sys_reg->filter |= val;
+	}
+
+	if (!device_property_read_u32(&client->dev, "azoteq,rate-np-ms",
+				      &val)) {
+		if (val > IQS269_RATE_NP_MS_MAX) {
+			dev_err(&client->dev, "Invalid report rate: %u\n", val);
+			return -EINVAL;
+		}
+
+		sys_reg->rate_np = val;
+	}
+
+	if (!device_property_read_u32(&client->dev, "azoteq,rate-lp-ms",
+				      &val)) {
+		if (val > IQS269_RATE_LP_MS_MAX) {
+			dev_err(&client->dev, "Invalid report rate: %u\n", val);
+			return -EINVAL;
+		}
+
+		sys_reg->rate_lp = val;
+	}
+
+	if (!device_property_read_u32(&client->dev, "azoteq,rate-ulp-ms",
+				      &val)) {
+		if (val > IQS269_RATE_ULP_MS_MAX) {
+			dev_err(&client->dev, "Invalid report rate: %u\n", val);
+			return -EINVAL;
+		}
+
+		sys_reg->rate_ulp = val / 16;
+	}
+
+	if (!device_property_read_u32(&client->dev, "azoteq,timeout-pwr-ms",
+				      &val)) {
+		if (val > IQS269_TIMEOUT_PWR_MS_MAX) {
+			dev_err(&client->dev, "Invalid timeout: %u\n", val);
+			return -EINVAL;
+		}
+
+		sys_reg->timeout_pwr = val / 512;
+	}
+
+	if (!device_property_read_u32(&client->dev, "azoteq,timeout-lta-ms",
+				      &val)) {
+		if (val > IQS269_TIMEOUT_LTA_MS_MAX) {
+			dev_err(&client->dev, "Invalid timeout: %u\n", val);
+			return -EINVAL;
+		}
+
+		sys_reg->timeout_lta = val / 512;
+	}
+
+	misc_a = be16_to_cpu(sys_reg->misc_a);
+	misc_b = be16_to_cpu(sys_reg->misc_b);
+
+	misc_a &= ~IQS269_MISC_A_ATI_BAND_DISABLE;
+	if (device_property_present(&client->dev, "azoteq,ati-band-disable"))
+		misc_a |= IQS269_MISC_A_ATI_BAND_DISABLE;
+
+	misc_a &= ~IQS269_MISC_A_ATI_LP_ONLY;
+	if (device_property_present(&client->dev, "azoteq,ati-lp-only"))
+		misc_a |= IQS269_MISC_A_ATI_LP_ONLY;
+
+	misc_a &= ~IQS269_MISC_A_ATI_BAND_TIGHTEN;
+	if (device_property_present(&client->dev, "azoteq,ati-band-tighten"))
+		misc_a |= IQS269_MISC_A_ATI_BAND_TIGHTEN;
+
+	misc_a &= ~IQS269_MISC_A_FILT_DISABLE;
+	if (device_property_present(&client->dev, "azoteq,filt-disable"))
+		misc_a |= IQS269_MISC_A_FILT_DISABLE;
+
+	if (!device_property_read_u32(&client->dev, "azoteq,gpio3-select",
+				      &val)) {
+		if (val >= IQS269_NUM_CH) {
+			dev_err(&client->dev, "Invalid GPIO3 selection: %u\n",
+				val);
+			return -EINVAL;
+		}
+
+		misc_a &= ~IQS269_MISC_A_GPIO3_SELECT_MASK;
+		misc_a |= (val << IQS269_MISC_A_GPIO3_SELECT_SHIFT);
+	}
+
+	misc_a &= ~IQS269_MISC_A_DUAL_DIR;
+	if (device_property_present(&client->dev, "azoteq,dual-direction"))
+		misc_a |= IQS269_MISC_A_DUAL_DIR;
+
+	if (!device_property_read_u32(&client->dev, "azoteq,tx-freq", &val)) {
+		if (val > IQS269_MISC_A_TX_FREQ_MAX) {
+			dev_err(&client->dev,
+				"Invalid excitation frequency: %u\n", val);
+			return -EINVAL;
+		}
+
+		misc_a &= ~IQS269_MISC_A_TX_FREQ_MASK;
+		misc_a |= (val << IQS269_MISC_A_TX_FREQ_SHIFT);
+	}
+
+	misc_a &= ~IQS269_MISC_A_GLOBAL_CAP_SIZE;
+	if (device_property_present(&client->dev, "azoteq,global-cap-increase"))
+		misc_a |= IQS269_MISC_A_GLOBAL_CAP_SIZE;
+
+	if (!device_property_read_u32(&client->dev, "azoteq,reseed-select",
+				      &val)) {
+		if (val > IQS269_MISC_B_RESEED_UI_SEL_MAX) {
+			dev_err(&client->dev, "Invalid reseed selection: %u\n",
+				val);
+			return -EINVAL;
+		}
+
+		misc_b &= ~IQS269_MISC_B_RESEED_UI_SEL_MASK;
+		misc_b |= (val << IQS269_MISC_B_RESEED_UI_SEL_SHIFT);
+	}
+
+	misc_b &= ~IQS269_MISC_B_TRACKING_UI_ENABLE;
+	if (device_property_present(&client->dev, "azoteq,tracking-enable"))
+		misc_b |= IQS269_MISC_B_TRACKING_UI_ENABLE;
+
+	if (!device_property_read_u32(&client->dev, "azoteq,filt-str-slider",
+				      &val)) {
+		if (val > IQS269_FILT_STR_MAX) {
+			dev_err(&client->dev, "Invalid filter strength: %u\n",
+				val);
+			return -EINVAL;
+		}
+
+		misc_b &= ~IQS269_MISC_B_FILT_STR_SLIDER;
+		misc_b |= val;
+	}
+
+	sys_reg->misc_a = cpu_to_be16(misc_a);
+	sys_reg->misc_b = cpu_to_be16(misc_b);
+
+	sys_reg->active = 0;
+	sys_reg->reseed = 0;
+
+	sys_reg->blocking = 0;
+
+	sys_reg->slider_select[0] = 0;
+	sys_reg->slider_select[1] = 0;
+
+	sys_reg->event_mask = ~((u8)IQS269_EVENT_MASK_SYS);
+
+	device_for_each_child_node(&client->dev, ch_node) {
+		error = iqs269_parse_chan(iqs269, ch_node);
+		if (error) {
+			fwnode_handle_put(ch_node);
+			return error;
+		}
+	}
+
+	/*
+	 * Volunteer all active channels to participate in ATI when REDO-ATI is
+	 * manually triggered.
+	 */
+	sys_reg->redo_ati = sys_reg->active;
+
+	general = be16_to_cpu(sys_reg->general);
+
+	if (device_property_present(&client->dev, "azoteq,clk-div")) {
+		general |= IQS269_SYS_SETTINGS_CLK_DIV;
+		iqs269->delay_mult = 4;
+	} else {
+		general &= ~IQS269_SYS_SETTINGS_CLK_DIV;
+		iqs269->delay_mult = 1;
+	}
+
+	/*
+	 * Configure the device to automatically switch between normal and low-
+	 * power modes as a function of sensing activity. Ultra-low-power mode,
+	 * if enabled, is reserved for suspend.
+	 */
+	general &= ~IQS269_SYS_SETTINGS_ULP_AUTO;
+	general &= ~IQS269_SYS_SETTINGS_DIS_AUTO;
+	general &= ~IQS269_SYS_SETTINGS_PWR_MODE_MASK;
+
+	if (!device_property_read_u32(&client->dev, "azoteq,ulp-update",
+				      &val)) {
+		if (val > IQS269_SYS_SETTINGS_ULP_UPDATE_MAX) {
+			dev_err(&client->dev, "Invalid update rate: %u\n", val);
+			return -EINVAL;
+		}
+
+		general &= ~IQS269_SYS_SETTINGS_ULP_UPDATE_MASK;
+		general |= (val << IQS269_SYS_SETTINGS_ULP_UPDATE_SHIFT);
+	}
+
+	general &= ~IQS269_SYS_SETTINGS_RESEED_OFFSET;
+	if (device_property_present(&client->dev, "azoteq,reseed-offset"))
+		general |= IQS269_SYS_SETTINGS_RESEED_OFFSET;
+
+	general |= IQS269_SYS_SETTINGS_EVENT_MODE;
+
+	/*
+	 * As per the datasheet, enable streaming during normal-power mode if
+	 * either slider is in use. In that case, the device returns to event
+	 * mode during low-power mode.
+	 */
+	if (sys_reg->slider_select[0] || sys_reg->slider_select[1])
+		general |= IQS269_SYS_SETTINGS_EVENT_MODE_LP;
+
+	general |= IQS269_SYS_SETTINGS_REDO_ATI;
+	general |= IQS269_SYS_SETTINGS_ACK_RESET;
+
+	sys_reg->general = cpu_to_be16(general);
+
+	return 0;
+}
+
+static int iqs269_dev_init(struct iqs269_private *iqs269)
+{
+	struct iqs269_sys_reg *sys_reg = &iqs269->sys_reg;
+	struct iqs269_ch_reg *ch_reg;
+	unsigned int val;
+	int error, i;
+
+	mutex_lock(&iqs269->lock);
+
+	error = regmap_update_bits(iqs269->regmap, IQS269_HALL_UI,
+				   IQS269_HALL_UI_ENABLE,
+				   iqs269->hall_enable ? ~0 : 0);
+	if (error)
+		goto err_mutex;
+
+	for (i = 0; i < IQS269_NUM_CH; i++) {
+		if (!(sys_reg->active & BIT(i)))
+			continue;
+
+		ch_reg = &iqs269->ch_reg[i];
+
+		error = regmap_raw_write(iqs269->regmap,
+					 IQS269_CHx_SETTINGS + i *
+					 sizeof(*ch_reg) / 2, ch_reg,
+					 sizeof(*ch_reg));
+		if (error)
+			goto err_mutex;
+	}
+
+	/*
+	 * The REDO-ATI and ATI channel selection fields must be written in the
+	 * same block write, so every field between registers 0x80 through 0x8B
+	 * (inclusive) must be written as well.
+	 */
+	error = regmap_raw_write(iqs269->regmap, IQS269_SYS_SETTINGS, sys_reg,
+				 sizeof(*sys_reg));
+	if (error)
+		goto err_mutex;
+
+	error = regmap_read_poll_timeout(iqs269->regmap, IQS269_SYS_FLAGS, val,
+					!(val & IQS269_SYS_FLAGS_IN_ATI),
+					 IQS269_ATI_POLL_SLEEP_US,
+					 IQS269_ATI_POLL_TIMEOUT_US);
+	if (error)
+		goto err_mutex;
+
+	msleep(IQS269_ATI_STABLE_DELAY_MS);
+	iqs269->ati_current = true;
+
+err_mutex:
+	mutex_unlock(&iqs269->lock);
+
+	return error;
+}
+
+static int iqs269_input_init(struct iqs269_private *iqs269)
+{
+	struct i2c_client *client = iqs269->client;
+	struct iqs269_flags flags;
+	unsigned int sw_code, keycode;
+	int error, i, j;
+	u8 dir_mask, state;
+
+	iqs269->keypad = devm_input_allocate_device(&client->dev);
+	if (!iqs269->keypad)
+		return -ENOMEM;
+
+	iqs269->keypad->keycodemax = ARRAY_SIZE(iqs269->keycode);
+	iqs269->keypad->keycode = iqs269->keycode;
+	iqs269->keypad->keycodesize = sizeof(*iqs269->keycode);
+
+	iqs269->keypad->name = "iqs269a_keypad";
+	iqs269->keypad->id.bustype = BUS_I2C;
+
+	if (iqs269->hall_enable) {
+		error = regmap_raw_read(iqs269->regmap, IQS269_SYS_FLAGS,
+					&flags, sizeof(flags));
+		if (error) {
+			dev_err(&client->dev,
+				"Failed to read initial status: %d\n", error);
+			return error;
+		}
+	}
+
+	for (i = 0; i < ARRAY_SIZE(iqs269_events); i++) {
+		dir_mask = flags.states[IQS269_ST_OFFS_DIR];
+		if (!iqs269_events[i].dir_up)
+			dir_mask = ~dir_mask;
+
+		state = flags.states[iqs269_events[i].st_offs] & dir_mask;
+
+		sw_code = iqs269->switches[i].code;
+
+		for (j = 0; j < IQS269_NUM_CH; j++) {
+			keycode = iqs269->keycode[i * IQS269_NUM_CH + j];
+
+			/*
+			 * Hall-effect sensing repurposes a pair of dedicated
+			 * channels, only one of which reports events.
+			 */
+			switch (j) {
+			case IQS269_CHx_HALL_ACTIVE:
+				if (iqs269->hall_enable &&
+				    iqs269->switches[i].enabled) {
+					input_set_capability(iqs269->keypad,
+							     EV_SW, sw_code);
+					input_report_switch(iqs269->keypad,
+							    sw_code,
+							    state & BIT(j));
+				}
+				fallthrough;
+
+			case IQS269_CHx_HALL_INACTIVE:
+				if (iqs269->hall_enable)
+					continue;
+				fallthrough;
+
+			default:
+				if (keycode != KEY_RESERVED)
+					input_set_capability(iqs269->keypad,
+							     EV_KEY, keycode);
+			}
+		}
+	}
+
+	input_sync(iqs269->keypad);
+
+	error = input_register_device(iqs269->keypad);
+	if (error) {
+		dev_err(&client->dev, "Failed to register keypad: %d\n", error);
+		return error;
+	}
+
+	for (i = 0; i < IQS269_NUM_SL; i++) {
+		if (!iqs269->sys_reg.slider_select[i])
+			continue;
+
+		iqs269->slider[i] = devm_input_allocate_device(&client->dev);
+		if (!iqs269->slider[i])
+			return -ENOMEM;
+
+		iqs269->slider[i]->name = i ? "iqs269a_slider_1"
+					    : "iqs269a_slider_0";
+		iqs269->slider[i]->id.bustype = BUS_I2C;
+
+		input_set_capability(iqs269->slider[i], EV_KEY, BTN_TOUCH);
+		input_set_abs_params(iqs269->slider[i], ABS_X, 0, 255, 0, 0);
+
+		error = input_register_device(iqs269->slider[i]);
+		if (error) {
+			dev_err(&client->dev,
+				"Failed to register slider %d: %d\n", i, error);
+			return error;
+		}
+	}
+
+	return 0;
+}
+
+static int iqs269_report(struct iqs269_private *iqs269)
+{
+	struct i2c_client *client = iqs269->client;
+	struct iqs269_flags flags;
+	unsigned int sw_code, keycode;
+	int error, i, j;
+	u8 slider_x[IQS269_NUM_SL];
+	u8 dir_mask, state;
+
+	error = regmap_raw_read(iqs269->regmap, IQS269_SYS_FLAGS, &flags,
+				sizeof(flags));
+	if (error) {
+		dev_err(&client->dev, "Failed to read device status: %d\n",
+			error);
+		return error;
+	}
+
+	/*
+	 * The device resets itself if its own watchdog bites, which can happen
+	 * in the event of an I2C communication error. In this case, the device
+	 * asserts a SHOW_RESET interrupt and all registers must be restored.
+	 */
+	if (be16_to_cpu(flags.system) & IQS269_SYS_FLAGS_SHOW_RESET) {
+		dev_err(&client->dev, "Unexpected device reset\n");
+
+		error = iqs269_dev_init(iqs269);
+		if (error)
+			dev_err(&client->dev,
+				"Failed to re-initialize device: %d\n", error);
+
+		return error;
+	}
+
+	error = regmap_raw_read(iqs269->regmap, IQS269_SLIDER_X, slider_x,
+				sizeof(slider_x));
+	if (error) {
+		dev_err(&client->dev, "Failed to read slider position: %d\n",
+			error);
+		return error;
+	}
+
+	for (i = 0; i < IQS269_NUM_SL; i++) {
+		if (!iqs269->sys_reg.slider_select[i])
+			continue;
+
+		/*
+		 * Report BTN_TOUCH if any channel that participates in the
+		 * slider is in a state of touch.
+		 */
+		if (flags.states[IQS269_ST_OFFS_TOUCH] &
+		    iqs269->sys_reg.slider_select[i]) {
+			input_report_key(iqs269->slider[i], BTN_TOUCH, 1);
+			input_report_abs(iqs269->slider[i], ABS_X, slider_x[i]);
+		} else {
+			input_report_key(iqs269->slider[i], BTN_TOUCH, 0);
+		}
+
+		input_sync(iqs269->slider[i]);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(iqs269_events); i++) {
+		dir_mask = flags.states[IQS269_ST_OFFS_DIR];
+		if (!iqs269_events[i].dir_up)
+			dir_mask = ~dir_mask;
+
+		state = flags.states[iqs269_events[i].st_offs] & dir_mask;
+
+		sw_code = iqs269->switches[i].code;
+
+		for (j = 0; j < IQS269_NUM_CH; j++) {
+			keycode = iqs269->keycode[i * IQS269_NUM_CH + j];
+
+			switch (j) {
+			case IQS269_CHx_HALL_ACTIVE:
+				if (iqs269->hall_enable &&
+				    iqs269->switches[i].enabled)
+					input_report_switch(iqs269->keypad,
+							    sw_code,
+							    state & BIT(j));
+				fallthrough;
+
+			case IQS269_CHx_HALL_INACTIVE:
+				if (iqs269->hall_enable)
+					continue;
+				fallthrough;
+
+			default:
+				input_report_key(iqs269->keypad, keycode,
+						 state & BIT(j));
+			}
+		}
+	}
+
+	input_sync(iqs269->keypad);
+
+	return 0;
+}
+
+static irqreturn_t iqs269_irq(int irq, void *context)
+{
+	struct iqs269_private *iqs269 = context;
+
+	if (iqs269_report(iqs269))
+		return IRQ_NONE;
+
+	/*
+	 * The device does not deassert its interrupt (RDY) pin until shortly
+	 * after receiving an I2C stop condition; the following delay ensures
+	 * the interrupt handler does not return before this time.
+	 */
+	iqs269_irq_wait();
+
+	return IRQ_HANDLED;
+}
+
+static ssize_t counts_show(struct device *dev,
+			   struct device_attribute *attr, char *buf)
+{
+	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
+	struct i2c_client *client = iqs269->client;
+	__le16 counts;
+	int error;
+
+	if (!iqs269->ati_current || iqs269->hall_enable)
+		return -EPERM;
+
+	/*
+	 * Unsolicited I2C communication prompts the device to assert its RDY
+	 * pin, so disable the interrupt line until the operation is finished
+	 * and RDY has been deasserted.
+	 */
+	disable_irq(client->irq);
+
+	error = regmap_raw_read(iqs269->regmap,
+				IQS269_CHx_COUNTS + iqs269->ch_num * 2,
+				&counts, sizeof(counts));
+
+	iqs269_irq_wait();
+	enable_irq(client->irq);
+
+	if (error)
+		return error;
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", le16_to_cpu(counts));
+}
+
+static ssize_t hall_bin_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
+	struct i2c_client *client = iqs269->client;
+	unsigned int val;
+	int error;
+
+	disable_irq(client->irq);
+
+	error = regmap_read(iqs269->regmap, IQS269_CAL_DATA_A, &val);
+
+	iqs269_irq_wait();
+	enable_irq(client->irq);
+
+	if (error)
+		return error;
+
+	switch (iqs269->ch_reg[IQS269_CHx_HALL_ACTIVE].rx_enable &
+		iqs269->ch_reg[IQS269_CHx_HALL_INACTIVE].rx_enable) {
+	case IQS269_HALL_PAD_R:
+		val &= IQS269_CAL_DATA_A_HALL_BIN_R_MASK;
+		val >>= IQS269_CAL_DATA_A_HALL_BIN_R_SHIFT;
+		break;
+
+	case IQS269_HALL_PAD_L:
+		val &= IQS269_CAL_DATA_A_HALL_BIN_L_MASK;
+		val >>= IQS269_CAL_DATA_A_HALL_BIN_L_SHIFT;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static ssize_t hall_enable_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", iqs269->hall_enable);
+}
+
+static ssize_t hall_enable_store(struct device *dev,
+				 struct device_attribute *attr, const char *buf,
+				 size_t count)
+{
+	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
+	unsigned int val;
+	int error;
+
+	error = kstrtouint(buf, 10, &val);
+	if (error)
+		return error;
+
+	mutex_lock(&iqs269->lock);
+
+	iqs269->hall_enable = val;
+	iqs269->ati_current = false;
+
+	mutex_unlock(&iqs269->lock);
+
+	return count;
+}
+
+static ssize_t ch_number_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", iqs269->ch_num);
+}
+
+static ssize_t ch_number_store(struct device *dev,
+			       struct device_attribute *attr, const char *buf,
+			       size_t count)
+{
+	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
+	unsigned int val;
+	int error;
+
+	error = kstrtouint(buf, 10, &val);
+	if (error)
+		return error;
+
+	if (val >= IQS269_NUM_CH)
+		return -EINVAL;
+
+	iqs269->ch_num = val;
+
+	return count;
+}
+
+static ssize_t rx_enable_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n",
+			 iqs269->ch_reg[iqs269->ch_num].rx_enable);
+}
+
+static ssize_t rx_enable_store(struct device *dev,
+			       struct device_attribute *attr, const char *buf,
+			       size_t count)
+{
+	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
+	unsigned int val;
+	int error;
+
+	error = kstrtouint(buf, 10, &val);
+	if (error)
+		return error;
+
+	if (val > 0xFF)
+		return -EINVAL;
+
+	mutex_lock(&iqs269->lock);
+
+	iqs269->ch_reg[iqs269->ch_num].rx_enable = val;
+	iqs269->ati_current = false;
+
+	mutex_unlock(&iqs269->lock);
+
+	return count;
+}
+
+static ssize_t ati_mode_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
+	unsigned int val;
+	int error;
+
+	error = iqs269_ati_mode_get(iqs269, iqs269->ch_num, &val);
+	if (error)
+		return error;
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static ssize_t ati_mode_store(struct device *dev,
+			      struct device_attribute *attr, const char *buf,
+			      size_t count)
+{
+	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
+	unsigned int val;
+	int error;
+
+	error = kstrtouint(buf, 10, &val);
+	if (error)
+		return error;
+
+	error = iqs269_ati_mode_set(iqs269, iqs269->ch_num, val);
+	if (error)
+		return error;
+
+	return count;
+}
+
+static ssize_t ati_base_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
+	unsigned int val;
+	int error;
+
+	error = iqs269_ati_base_get(iqs269, iqs269->ch_num, &val);
+	if (error)
+		return error;
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static ssize_t ati_base_store(struct device *dev,
+			      struct device_attribute *attr, const char *buf,
+			      size_t count)
+{
+	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
+	unsigned int val;
+	int error;
+
+	error = kstrtouint(buf, 10, &val);
+	if (error)
+		return error;
+
+	error = iqs269_ati_base_set(iqs269, iqs269->ch_num, val);
+	if (error)
+		return error;
+
+	return count;
+}
+
+static ssize_t ati_target_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
+	unsigned int val;
+	int error;
+
+	error = iqs269_ati_target_get(iqs269, iqs269->ch_num, &val);
+	if (error)
+		return error;
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static ssize_t ati_target_store(struct device *dev,
+				struct device_attribute *attr, const char *buf,
+				size_t count)
+{
+	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
+	unsigned int val;
+	int error;
+
+	error = kstrtouint(buf, 10, &val);
+	if (error)
+		return error;
+
+	error = iqs269_ati_target_set(iqs269, iqs269->ch_num, val);
+	if (error)
+		return error;
+
+	return count;
+}
+
+static ssize_t ati_trigger_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", iqs269->ati_current);
+}
+
+static ssize_t ati_trigger_store(struct device *dev,
+				 struct device_attribute *attr, const char *buf,
+				 size_t count)
+{
+	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
+	struct i2c_client *client = iqs269->client;
+	unsigned int val;
+	int error;
+
+	error = kstrtouint(buf, 10, &val);
+	if (error)
+		return error;
+
+	if (!val)
+		return count;
+
+	disable_irq(client->irq);
+
+	error = iqs269_dev_init(iqs269);
+
+	iqs269_irq_wait();
+	enable_irq(client->irq);
+
+	if (error)
+		return error;
+
+	return count;
+}
+
+static DEVICE_ATTR_RO(counts);
+static DEVICE_ATTR_RO(hall_bin);
+static DEVICE_ATTR_RW(hall_enable);
+static DEVICE_ATTR_RW(ch_number);
+static DEVICE_ATTR_RW(rx_enable);
+static DEVICE_ATTR_RW(ati_mode);
+static DEVICE_ATTR_RW(ati_base);
+static DEVICE_ATTR_RW(ati_target);
+static DEVICE_ATTR_RW(ati_trigger);
+
+static struct attribute *iqs269_attrs[] = {
+	&dev_attr_counts.attr,
+	&dev_attr_hall_bin.attr,
+	&dev_attr_hall_enable.attr,
+	&dev_attr_ch_number.attr,
+	&dev_attr_rx_enable.attr,
+	&dev_attr_ati_mode.attr,
+	&dev_attr_ati_base.attr,
+	&dev_attr_ati_target.attr,
+	&dev_attr_ati_trigger.attr,
+	NULL,
+};
+
+static const struct attribute_group iqs269_attr_group = {
+	.attrs = iqs269_attrs,
+};
+
+static const struct regmap_config iqs269_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 16,
+	.max_register = IQS269_MAX_REG,
+};
+
+static int iqs269_probe(struct i2c_client *client)
+{
+	struct iqs269_ver_info ver_info;
+	struct iqs269_private *iqs269;
+	int error;
+
+	iqs269 = devm_kzalloc(&client->dev, sizeof(*iqs269), GFP_KERNEL);
+	if (!iqs269)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, iqs269);
+	iqs269->client = client;
+
+	iqs269->regmap = devm_regmap_init_i2c(client, &iqs269_regmap_config);
+	if (IS_ERR(iqs269->regmap)) {
+		error = PTR_ERR(iqs269->regmap);
+		dev_err(&client->dev, "Failed to initialize register map: %d\n",
+			error);
+		return error;
+	}
+
+	mutex_init(&iqs269->lock);
+
+	error = regmap_raw_read(iqs269->regmap, IQS269_VER_INFO, &ver_info,
+				sizeof(ver_info));
+	if (error)
+		return error;
+
+	if (ver_info.prod_num != IQS269_VER_INFO_PROD_NUM) {
+		dev_err(&client->dev, "Unrecognized product number: 0x%02X\n",
+			ver_info.prod_num);
+		return -EINVAL;
+	}
+
+	error = iqs269_parse_prop(iqs269);
+	if (error)
+		return error;
+
+	error = iqs269_dev_init(iqs269);
+	if (error) {
+		dev_err(&client->dev, "Failed to initialize device: %d\n",
+			error);
+		return error;
+	}
+
+	error = iqs269_input_init(iqs269);
+	if (error)
+		return error;
+
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					  NULL, iqs269_irq, IRQF_ONESHOT,
+					  client->name, iqs269);
+	if (error) {
+		dev_err(&client->dev, "Failed to request IRQ: %d\n", error);
+		return error;
+	}
+
+	error = devm_device_add_group(&client->dev, &iqs269_attr_group);
+	if (error)
+		dev_err(&client->dev, "Failed to add attributes: %d\n", error);
+
+	return error;
+}
+
+static int __maybe_unused iqs269_suspend(struct device *dev)
+{
+	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
+	struct i2c_client *client = iqs269->client;
+	unsigned int val;
+	int error;
+
+	if (!iqs269->suspend_mode)
+		return 0;
+
+	disable_irq(client->irq);
+
+	/*
+	 * Automatic power mode switching must be disabled before the device is
+	 * forced into any particular power mode. In this case, the device will
+	 * transition into normal-power mode.
+	 */
+	error = regmap_update_bits(iqs269->regmap, IQS269_SYS_SETTINGS,
+				   IQS269_SYS_SETTINGS_DIS_AUTO, ~0);
+	if (error)
+		goto err_irq;
+
+	/*
+	 * The following check ensures the device has completed its transition
+	 * into normal-power mode before a manual mode switch is performed.
+	 */
+	error = regmap_read_poll_timeout(iqs269->regmap, IQS269_SYS_FLAGS, val,
+					!(val & IQS269_SYS_FLAGS_PWR_MODE_MASK),
+					 IQS269_PWR_MODE_POLL_SLEEP_US,
+					 IQS269_PWR_MODE_POLL_TIMEOUT_US);
+	if (error)
+		goto err_irq;
+
+	error = regmap_update_bits(iqs269->regmap, IQS269_SYS_SETTINGS,
+				   IQS269_SYS_SETTINGS_PWR_MODE_MASK,
+				   iqs269->suspend_mode <<
+				   IQS269_SYS_SETTINGS_PWR_MODE_SHIFT);
+	if (error)
+		goto err_irq;
+
+	/*
+	 * This last check ensures the device has completed its transition into
+	 * the desired power mode to prevent any spurious interrupts from being
+	 * triggered after iqs269_suspend has already returned.
+	 */
+	error = regmap_read_poll_timeout(iqs269->regmap, IQS269_SYS_FLAGS, val,
+					 (val & IQS269_SYS_FLAGS_PWR_MODE_MASK)
+					 == (iqs269->suspend_mode <<
+					     IQS269_SYS_FLAGS_PWR_MODE_SHIFT),
+					 IQS269_PWR_MODE_POLL_SLEEP_US,
+					 IQS269_PWR_MODE_POLL_TIMEOUT_US);
+
+err_irq:
+	iqs269_irq_wait();
+	enable_irq(client->irq);
+
+	return error;
+}
+
+static int __maybe_unused iqs269_resume(struct device *dev)
+{
+	struct iqs269_private *iqs269 = dev_get_drvdata(dev);
+	struct i2c_client *client = iqs269->client;
+	unsigned int val;
+	int error;
+
+	if (!iqs269->suspend_mode)
+		return 0;
+
+	disable_irq(client->irq);
+
+	error = regmap_update_bits(iqs269->regmap, IQS269_SYS_SETTINGS,
+				   IQS269_SYS_SETTINGS_PWR_MODE_MASK, 0);
+	if (error)
+		goto err_irq;
+
+	/*
+	 * This check ensures the device has returned to normal-power mode
+	 * before automatic power mode switching is re-enabled.
+	 */
+	error = regmap_read_poll_timeout(iqs269->regmap, IQS269_SYS_FLAGS, val,
+					!(val & IQS269_SYS_FLAGS_PWR_MODE_MASK),
+					 IQS269_PWR_MODE_POLL_SLEEP_US,
+					 IQS269_PWR_MODE_POLL_TIMEOUT_US);
+	if (error)
+		goto err_irq;
+
+	error = regmap_update_bits(iqs269->regmap, IQS269_SYS_SETTINGS,
+				   IQS269_SYS_SETTINGS_DIS_AUTO, 0);
+	if (error)
+		goto err_irq;
+
+	/*
+	 * This step reports any events that may have been "swallowed" as a
+	 * result of polling PWR_MODE (which automatically acknowledges any
+	 * pending interrupts).
+	 */
+	error = iqs269_report(iqs269);
+
+err_irq:
+	iqs269_irq_wait();
+	enable_irq(client->irq);
+
+	return error;
+}
+
+static SIMPLE_DEV_PM_OPS(iqs269_pm, iqs269_suspend, iqs269_resume);
+
+static const struct of_device_id iqs269_of_match[] = {
+	{ .compatible = "azoteq,iqs269a" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, iqs269_of_match);
+
+static struct i2c_driver iqs269_i2c_driver = {
+	.driver = {
+		.name = "iqs269a",
+		.of_match_table = iqs269_of_match,
+		.pm = &iqs269_pm,
+	},
+	.probe_new = iqs269_probe,
+};
+module_i2c_driver(iqs269_i2c_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS269A Capacitive Touch Controller");
+MODULE_LICENSE("GPL");