Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 590 insertions, 0 deletions

diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c
new file mode 100644
index 000000000..bee4b1376
--- /dev/null
+++ b/drivers/input/misc/keyspan_remote.c
@@ -0,0 +1,590 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * keyspan_remote: USB driver for the Keyspan DMR
+ *
+ * Copyright (C) 2005 Zymeta Corporation - Michael Downey (downey@zymeta.com)
+ *
+ * This driver has been put together with the support of Innosys, Inc.
+ * and Keyspan, Inc the manufacturers of the Keyspan USB DMR product.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+
+/* Parameters that can be passed to the driver. */
+static int debug;
+module_param(debug, int, 0444);
+MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
+
+/* Vendor and product ids */
+#define USB_KEYSPAN_VENDOR_ID		0x06CD
+#define USB_KEYSPAN_PRODUCT_UIA11	0x0202
+
+/* Defines for converting the data from the remote. */
+#define ZERO		0x18
+#define ZERO_MASK	0x1F	/* 5 bits for a 0 */
+#define ONE		0x3C
+#define ONE_MASK	0x3F	/* 6 bits for a 1 */
+#define SYNC		0x3F80
+#define SYNC_MASK	0x3FFF	/* 14 bits for a SYNC sequence */
+#define STOP		0x00
+#define STOP_MASK	0x1F	/* 5 bits for the STOP sequence */
+#define GAP		0xFF
+
+#define RECV_SIZE	8	/* The UIA-11 type have a 8 byte limit. */
+
+/*
+ * Table that maps the 31 possible keycodes to input keys.
+ * Currently there are 15 and 17 button models so RESERVED codes
+ * are blank areas in the mapping.
+ */
+static const unsigned short keyspan_key_table[] = {
+	KEY_RESERVED,		/* 0 is just a place holder. */
+	KEY_RESERVED,
+	KEY_STOP,
+	KEY_PLAYCD,
+	KEY_RESERVED,
+	KEY_PREVIOUSSONG,
+	KEY_REWIND,
+	KEY_FORWARD,
+	KEY_NEXTSONG,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_PAUSE,
+	KEY_VOLUMEUP,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_VOLUMEDOWN,
+	KEY_RESERVED,
+	KEY_UP,
+	KEY_RESERVED,
+	KEY_MUTE,
+	KEY_LEFT,
+	KEY_ENTER,
+	KEY_RIGHT,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_DOWN,
+	KEY_RESERVED,
+	KEY_KPASTERISK,
+	KEY_RESERVED,
+	KEY_MENU
+};
+
+/* table of devices that work with this driver */
+static const struct usb_device_id keyspan_table[] = {
+	{ USB_DEVICE(USB_KEYSPAN_VENDOR_ID, USB_KEYSPAN_PRODUCT_UIA11) },
+	{ }					/* Terminating entry */
+};
+
+/* Structure to store all the real stuff that a remote sends to us. */
+struct keyspan_message {
+	u16	system;
+	u8	button;
+	u8	toggle;
+};
+
+/* Structure used for all the bit testing magic needed to be done. */
+struct bit_tester {
+	u32	tester;
+	int	len;
+	int	pos;
+	int	bits_left;
+	u8	buffer[32];
+};
+
+/* Structure to hold all of our driver specific stuff */
+struct usb_keyspan {
+	char				name[128];
+	char				phys[64];
+	unsigned short			keymap[ARRAY_SIZE(keyspan_key_table)];
+	struct usb_device		*udev;
+	struct input_dev		*input;
+	struct usb_interface		*interface;
+	struct usb_endpoint_descriptor	*in_endpoint;
+	struct urb*			irq_urb;
+	int				open;
+	dma_addr_t			in_dma;
+	unsigned char			*in_buffer;
+
+	/* variables used to parse messages from remote. */
+	struct bit_tester		data;
+	int				stage;
+	int				toggle;
+};
+
+static struct usb_driver keyspan_driver;
+
+/*
+ * Debug routine that prints out what we've received from the remote.
+ */
+static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/
+{
+	char codes[4 * RECV_SIZE];
+	int i;
+
+	for (i = 0; i < RECV_SIZE; i++)
+		snprintf(codes + i * 3, 4, "%02x ", dev->in_buffer[i]);
+
+	dev_info(&dev->udev->dev, "%s\n", codes);
+}
+
+/*
+ * Routine that manages the bit_tester structure.  It makes sure that there are
+ * at least bits_needed bits loaded into the tester.
+ */
+static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed)
+{
+	if (dev->data.bits_left >= bits_needed)
+		return 0;
+
+	/*
+	 * Somehow we've missed the last message. The message will be repeated
+	 * though so it's not too big a deal
+	 */
+	if (dev->data.pos >= dev->data.len) {
+		dev_dbg(&dev->interface->dev,
+			"%s - Error ran out of data. pos: %d, len: %d\n",
+			__func__, dev->data.pos, dev->data.len);
+		return -1;
+	}
+
+	/* Load as much as we can into the tester. */
+	while ((dev->data.bits_left + 7 < (sizeof(dev->data.tester) * 8)) &&
+	       (dev->data.pos < dev->data.len)) {
+		dev->data.tester += (dev->data.buffer[dev->data.pos++] << dev->data.bits_left);
+		dev->data.bits_left += 8;
+	}
+
+	return 0;
+}
+
+static void keyspan_report_button(struct usb_keyspan *remote, int button, int press)
+{
+	struct input_dev *input = remote->input;
+
+	input_event(input, EV_MSC, MSC_SCAN, button);
+	input_report_key(input, remote->keymap[button], press);
+	input_sync(input);
+}
+
+/*
+ * Routine that handles all the logic needed to parse out the message from the remote.
+ */
+static void keyspan_check_data(struct usb_keyspan *remote)
+{
+	int i;
+	int found = 0;
+	struct keyspan_message message;
+
+	switch(remote->stage) {
+	case 0:
+		/*
+		 * In stage 0 we want to find the start of a message.  The remote sends a 0xFF as filler.
+		 * So the first byte that isn't a FF should be the start of a new message.
+		 */
+		for (i = 0; i < RECV_SIZE && remote->in_buffer[i] == GAP; ++i);
+
+		if (i < RECV_SIZE) {
+			memcpy(remote->data.buffer, remote->in_buffer, RECV_SIZE);
+			remote->data.len = RECV_SIZE;
+			remote->data.pos = 0;
+			remote->data.tester = 0;
+			remote->data.bits_left = 0;
+			remote->stage = 1;
+		}
+		break;
+
+	case 1:
+		/*
+		 * Stage 1 we should have 16 bytes and should be able to detect a
+		 * SYNC.  The SYNC is 14 bits, 7 0's and then 7 1's.
+		 */
+		memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
+		remote->data.len += RECV_SIZE;
+
+		found = 0;
+		while ((remote->data.bits_left >= 14 || remote->data.pos < remote->data.len) && !found) {
+			for (i = 0; i < 8; ++i) {
+				if (keyspan_load_tester(remote, 14) != 0) {
+					remote->stage = 0;
+					return;
+				}
+
+				if ((remote->data.tester & SYNC_MASK) == SYNC) {
+					remote->data.tester = remote->data.tester >> 14;
+					remote->data.bits_left -= 14;
+					found = 1;
+					break;
+				} else {
+					remote->data.tester = remote->data.tester >> 1;
+					--remote->data.bits_left;
+				}
+			}
+		}
+
+		if (!found) {
+			remote->stage = 0;
+			remote->data.len = 0;
+		} else {
+			remote->stage = 2;
+		}
+		break;
+
+	case 2:
+		/*
+		 * Stage 2 we should have 24 bytes which will be enough for a full
+		 * message.  We need to parse out the system code, button code,
+		 * toggle code, and stop.
+		 */
+		memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
+		remote->data.len += RECV_SIZE;
+
+		message.system = 0;
+		for (i = 0; i < 9; i++) {
+			keyspan_load_tester(remote, 6);
+
+			if ((remote->data.tester & ZERO_MASK) == ZERO) {
+				message.system = message.system << 1;
+				remote->data.tester = remote->data.tester >> 5;
+				remote->data.bits_left -= 5;
+			} else if ((remote->data.tester & ONE_MASK) == ONE) {
+				message.system = (message.system << 1) + 1;
+				remote->data.tester = remote->data.tester >> 6;
+				remote->data.bits_left -= 6;
+			} else {
+				dev_err(&remote->interface->dev,
+					"%s - Unknown sequence found in system data.\n",
+					__func__);
+				remote->stage = 0;
+				return;
+			}
+		}
+
+		message.button = 0;
+		for (i = 0; i < 5; i++) {
+			keyspan_load_tester(remote, 6);
+
+			if ((remote->data.tester & ZERO_MASK) == ZERO) {
+				message.button = message.button << 1;
+				remote->data.tester = remote->data.tester >> 5;
+				remote->data.bits_left -= 5;
+			} else if ((remote->data.tester & ONE_MASK) == ONE) {
+				message.button = (message.button << 1) + 1;
+				remote->data.tester = remote->data.tester >> 6;
+				remote->data.bits_left -= 6;
+			} else {
+				dev_err(&remote->interface->dev,
+					"%s - Unknown sequence found in button data.\n",
+					__func__);
+				remote->stage = 0;
+				return;
+			}
+		}
+
+		keyspan_load_tester(remote, 6);
+		if ((remote->data.tester & ZERO_MASK) == ZERO) {
+			message.toggle = 0;
+			remote->data.tester = remote->data.tester >> 5;
+			remote->data.bits_left -= 5;
+		} else if ((remote->data.tester & ONE_MASK) == ONE) {
+			message.toggle = 1;
+			remote->data.tester = remote->data.tester >> 6;
+			remote->data.bits_left -= 6;
+		} else {
+			dev_err(&remote->interface->dev,
+				"%s - Error in message, invalid toggle.\n",
+				__func__);
+			remote->stage = 0;
+			return;
+		}
+
+		keyspan_load_tester(remote, 5);
+		if ((remote->data.tester & STOP_MASK) == STOP) {
+			remote->data.tester = remote->data.tester >> 5;
+			remote->data.bits_left -= 5;
+		} else {
+			dev_err(&remote->interface->dev,
+				"Bad message received, no stop bit found.\n");
+		}
+
+		dev_dbg(&remote->interface->dev,
+			"%s found valid message: system: %d, button: %d, toggle: %d\n",
+			__func__, message.system, message.button, message.toggle);
+
+		if (message.toggle != remote->toggle) {
+			keyspan_report_button(remote, message.button, 1);
+			keyspan_report_button(remote, message.button, 0);
+			remote->toggle = message.toggle;
+		}
+
+		remote->stage = 0;
+		break;
+	}
+}
+
+/*
+ * Routine for sending all the initialization messages to the remote.
+ */
+static int keyspan_setup(struct usb_device* dev)
+{
+	int retval = 0;
+
+	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+				 0x11, 0x40, 0x5601, 0x0, NULL, 0,
+				 USB_CTRL_SET_TIMEOUT);
+	if (retval) {
+		dev_dbg(&dev->dev, "%s - failed to set bit rate due to error: %d\n",
+			__func__, retval);
+		return(retval);
+	}
+
+	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+				 0x44, 0x40, 0x0, 0x0, NULL, 0,
+				 USB_CTRL_SET_TIMEOUT);
+	if (retval) {
+		dev_dbg(&dev->dev, "%s - failed to set resume sensitivity due to error: %d\n",
+			__func__, retval);
+		return(retval);
+	}
+
+	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+				 0x22, 0x40, 0x0, 0x0, NULL, 0,
+				 USB_CTRL_SET_TIMEOUT);
+	if (retval) {
+		dev_dbg(&dev->dev, "%s - failed to turn receive on due to error: %d\n",
+			__func__, retval);
+		return(retval);
+	}
+
+	dev_dbg(&dev->dev, "%s - Setup complete.\n", __func__);
+	return(retval);
+}
+
+/*
+ * Routine used to handle a new message that has come in.
+ */
+static void keyspan_irq_recv(struct urb *urb)
+{
+	struct usb_keyspan *dev = urb->context;
+	int retval;
+
+	/* Check our status in case we need to bail out early. */
+	switch (urb->status) {
+	case 0:
+		break;
+
+	/* Device went away so don't keep trying to read from it. */
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		return;
+
+	default:
+		goto resubmit;
+	}
+
+	if (debug)
+		keyspan_print(dev);
+
+	keyspan_check_data(dev);
+
+resubmit:
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		dev_err(&dev->interface->dev,
+			"%s - usb_submit_urb failed with result: %d\n",
+			__func__, retval);
+}
+
+static int keyspan_open(struct input_dev *dev)
+{
+	struct usb_keyspan *remote = input_get_drvdata(dev);
+
+	remote->irq_urb->dev = remote->udev;
+	if (usb_submit_urb(remote->irq_urb, GFP_KERNEL))
+		return -EIO;
+
+	return 0;
+}
+
+static void keyspan_close(struct input_dev *dev)
+{
+	struct usb_keyspan *remote = input_get_drvdata(dev);
+
+	usb_kill_urb(remote->irq_urb);
+}
+
+static struct usb_endpoint_descriptor *keyspan_get_in_endpoint(struct usb_host_interface *iface)
+{
+
+	struct usb_endpoint_descriptor *endpoint;
+	int i;
+
+	for (i = 0; i < iface->desc.bNumEndpoints; ++i) {
+		endpoint = &iface->endpoint[i].desc;
+
+		if (usb_endpoint_is_int_in(endpoint)) {
+			/* we found our interrupt in endpoint */
+			return endpoint;
+		}
+	}
+
+	return NULL;
+}
+
+/*
+ * Routine that sets up the driver to handle a specific USB device detected on the bus.
+ */
+static int keyspan_probe(struct usb_interface *interface, const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(interface);
+	struct usb_endpoint_descriptor *endpoint;
+	struct usb_keyspan *remote;
+	struct input_dev *input_dev;
+	int i, error;
+
+	endpoint = keyspan_get_in_endpoint(interface->cur_altsetting);
+	if (!endpoint)
+		return -ENODEV;
+
+	remote = kzalloc(sizeof(*remote), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!remote || !input_dev) {
+		error = -ENOMEM;
+		goto fail1;
+	}
+
+	remote->udev = udev;
+	remote->input = input_dev;
+	remote->interface = interface;
+	remote->in_endpoint = endpoint;
+	remote->toggle = -1;	/* Set to -1 so we will always not match the toggle from the first remote message. */
+
+	remote->in_buffer = usb_alloc_coherent(udev, RECV_SIZE, GFP_KERNEL, &remote->in_dma);
+	if (!remote->in_buffer) {
+		error = -ENOMEM;
+		goto fail1;
+	}
+
+	remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!remote->irq_urb) {
+		error = -ENOMEM;
+		goto fail2;
+	}
+
+	error = keyspan_setup(udev);
+	if (error) {
+		error = -ENODEV;
+		goto fail3;
+	}
+
+	if (udev->manufacturer)
+		strscpy(remote->name, udev->manufacturer, sizeof(remote->name));
+
+	if (udev->product) {
+		if (udev->manufacturer)
+			strlcat(remote->name, " ", sizeof(remote->name));
+		strlcat(remote->name, udev->product, sizeof(remote->name));
+	}
+
+	if (!strlen(remote->name))
+		snprintf(remote->name, sizeof(remote->name),
+			 "USB Keyspan Remote %04x:%04x",
+			 le16_to_cpu(udev->descriptor.idVendor),
+			 le16_to_cpu(udev->descriptor.idProduct));
+
+	usb_make_path(udev, remote->phys, sizeof(remote->phys));
+	strlcat(remote->phys, "/input0", sizeof(remote->phys));
+	memcpy(remote->keymap, keyspan_key_table, sizeof(remote->keymap));
+
+	input_dev->name = remote->name;
+	input_dev->phys = remote->phys;
+	usb_to_input_id(udev, &input_dev->id);
+	input_dev->dev.parent = &interface->dev;
+	input_dev->keycode = remote->keymap;
+	input_dev->keycodesize = sizeof(unsigned short);
+	input_dev->keycodemax = ARRAY_SIZE(remote->keymap);
+
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+	__set_bit(EV_KEY, input_dev->evbit);
+	for (i = 0; i < ARRAY_SIZE(keyspan_key_table); i++)
+		__set_bit(keyspan_key_table[i], input_dev->keybit);
+	__clear_bit(KEY_RESERVED, input_dev->keybit);
+
+	input_set_drvdata(input_dev, remote);
+
+	input_dev->open = keyspan_open;
+	input_dev->close = keyspan_close;
+
+	/*
+	 * Initialize the URB to access the device.
+	 * The urb gets sent to the device in keyspan_open()
+	 */
+	usb_fill_int_urb(remote->irq_urb,
+			 remote->udev,
+			 usb_rcvintpipe(remote->udev, endpoint->bEndpointAddress),
+			 remote->in_buffer, RECV_SIZE, keyspan_irq_recv, remote,
+			 endpoint->bInterval);
+	remote->irq_urb->transfer_dma = remote->in_dma;
+	remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	/* we can register the device now, as it is ready */
+	error = input_register_device(remote->input);
+	if (error)
+		goto fail3;
+
+	/* save our data pointer in this interface device */
+	usb_set_intfdata(interface, remote);
+
+	return 0;
+
+ fail3:	usb_free_urb(remote->irq_urb);
+ fail2:	usb_free_coherent(udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
+ fail1:	kfree(remote);
+	input_free_device(input_dev);
+
+	return error;
+}
+
+/*
+ * Routine called when a device is disconnected from the USB.
+ */
+static void keyspan_disconnect(struct usb_interface *interface)
+{
+	struct usb_keyspan *remote;
+
+	remote = usb_get_intfdata(interface);
+	usb_set_intfdata(interface, NULL);
+
+	if (remote) {	/* We have a valid driver structure so clean up everything we allocated. */
+		input_unregister_device(remote->input);
+		usb_kill_urb(remote->irq_urb);
+		usb_free_urb(remote->irq_urb);
+		usb_free_coherent(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
+		kfree(remote);
+	}
+}
+
+/*
+ * Standard driver set up sections
+ */
+static struct usb_driver keyspan_driver =
+{
+	.name =		"keyspan_remote",
+	.probe =	keyspan_probe,
+	.disconnect =	keyspan_disconnect,
+	.id_table =	keyspan_table
+};
+
+module_usb_driver(keyspan_driver);
+
+MODULE_DEVICE_TABLE(usb, keyspan_table);
+MODULE_AUTHOR("Michael Downey <downey@zymeta.com>");
+MODULE_DESCRIPTION("Driver for the USB Keyspan remote control.");
+MODULE_LICENSE("GPL");