Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 470 insertions, 0 deletions

diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
new file mode 100644
index 000000000..549df01b6
--- /dev/null
+++ b/drivers/input/misc/pm8941-pwrkey.c
@@ -0,0 +1,470 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2010-2011, 2020-2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2014, Sony Mobile Communications Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/ktime.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+#define PON_REV2			0x01
+
+#define PON_SUBTYPE			0x05
+
+#define PON_SUBTYPE_PRIMARY		0x01
+#define PON_SUBTYPE_SECONDARY		0x02
+#define PON_SUBTYPE_1REG		0x03
+#define PON_SUBTYPE_GEN2_PRIMARY	0x04
+#define PON_SUBTYPE_GEN2_SECONDARY	0x05
+#define PON_SUBTYPE_GEN3_PBS		0x08
+#define PON_SUBTYPE_GEN3_HLOS		0x09
+
+#define PON_RT_STS			0x10
+#define  PON_KPDPWR_N_SET		BIT(0)
+#define  PON_RESIN_N_SET		BIT(1)
+#define  PON_GEN3_RESIN_N_SET		BIT(6)
+#define  PON_GEN3_KPDPWR_N_SET		BIT(7)
+
+#define PON_PS_HOLD_RST_CTL		0x5a
+#define PON_PS_HOLD_RST_CTL2		0x5b
+#define  PON_PS_HOLD_ENABLE		BIT(7)
+#define  PON_PS_HOLD_TYPE_MASK		0x0f
+#define  PON_PS_HOLD_TYPE_WARM_RESET	1
+#define  PON_PS_HOLD_TYPE_SHUTDOWN	4
+#define  PON_PS_HOLD_TYPE_HARD_RESET	7
+
+#define PON_PULL_CTL			0x70
+#define  PON_KPDPWR_PULL_UP		BIT(1)
+#define  PON_RESIN_PULL_UP		BIT(0)
+
+#define PON_DBC_CTL			0x71
+#define  PON_DBC_DELAY_MASK		0x7
+
+struct pm8941_data {
+	unsigned int	pull_up_bit;
+	unsigned int	status_bit;
+	bool		supports_ps_hold_poff_config;
+	bool		supports_debounce_config;
+	bool		has_pon_pbs;
+	const char	*name;
+	const char	*phys;
+};
+
+struct pm8941_pwrkey {
+	struct device *dev;
+	int irq;
+	u32 baseaddr;
+	u32 pon_pbs_baseaddr;
+	struct regmap *regmap;
+	struct input_dev *input;
+
+	unsigned int revision;
+	unsigned int subtype;
+	struct notifier_block reboot_notifier;
+
+	u32 code;
+	u32 sw_debounce_time_us;
+	ktime_t sw_debounce_end_time;
+	bool last_status;
+	const struct pm8941_data *data;
+};
+
+static int pm8941_reboot_notify(struct notifier_block *nb,
+				unsigned long code, void *unused)
+{
+	struct pm8941_pwrkey *pwrkey = container_of(nb, struct pm8941_pwrkey,
+						    reboot_notifier);
+	unsigned int enable_reg;
+	unsigned int reset_type;
+	int error;
+
+	/* PMICs with revision 0 have the enable bit in same register as ctrl */
+	if (pwrkey->revision == 0)
+		enable_reg = PON_PS_HOLD_RST_CTL;
+	else
+		enable_reg = PON_PS_HOLD_RST_CTL2;
+
+	error = regmap_update_bits(pwrkey->regmap,
+				   pwrkey->baseaddr + enable_reg,
+				   PON_PS_HOLD_ENABLE,
+				   0);
+	if (error)
+		dev_err(pwrkey->dev,
+			"unable to clear ps hold reset enable: %d\n",
+			error);
+
+	/*
+	 * Updates of PON_PS_HOLD_ENABLE requires 3 sleep cycles between
+	 * writes.
+	 */
+	usleep_range(100, 1000);
+
+	switch (code) {
+	case SYS_HALT:
+	case SYS_POWER_OFF:
+		reset_type = PON_PS_HOLD_TYPE_SHUTDOWN;
+		break;
+	case SYS_RESTART:
+	default:
+		if (reboot_mode == REBOOT_WARM)
+			reset_type = PON_PS_HOLD_TYPE_WARM_RESET;
+		else
+			reset_type = PON_PS_HOLD_TYPE_HARD_RESET;
+		break;
+	}
+
+	error = regmap_update_bits(pwrkey->regmap,
+				   pwrkey->baseaddr + PON_PS_HOLD_RST_CTL,
+				   PON_PS_HOLD_TYPE_MASK,
+				   reset_type);
+	if (error)
+		dev_err(pwrkey->dev, "unable to set ps hold reset type: %d\n",
+			error);
+
+	error = regmap_update_bits(pwrkey->regmap,
+				   pwrkey->baseaddr + enable_reg,
+				   PON_PS_HOLD_ENABLE,
+				   PON_PS_HOLD_ENABLE);
+	if (error)
+		dev_err(pwrkey->dev, "unable to re-set enable: %d\n", error);
+
+	return NOTIFY_DONE;
+}
+
+static irqreturn_t pm8941_pwrkey_irq(int irq, void *_data)
+{
+	struct pm8941_pwrkey *pwrkey = _data;
+	unsigned int sts;
+	int err;
+
+	if (pwrkey->sw_debounce_time_us) {
+		if (ktime_before(ktime_get(), pwrkey->sw_debounce_end_time)) {
+			dev_dbg(pwrkey->dev,
+				"ignoring key event received before debounce end %llu us\n",
+				pwrkey->sw_debounce_end_time);
+			return IRQ_HANDLED;
+		}
+	}
+
+	err = regmap_read(pwrkey->regmap, pwrkey->baseaddr + PON_RT_STS, &sts);
+	if (err)
+		return IRQ_HANDLED;
+
+	sts &= pwrkey->data->status_bit;
+
+	if (pwrkey->sw_debounce_time_us && !sts)
+		pwrkey->sw_debounce_end_time = ktime_add_us(ktime_get(),
+						pwrkey->sw_debounce_time_us);
+
+	/*
+	 * Simulate a press event in case a release event occurred without a
+	 * corresponding press event.
+	 */
+	if (!pwrkey->last_status && !sts) {
+		input_report_key(pwrkey->input, pwrkey->code, 1);
+		input_sync(pwrkey->input);
+	}
+	pwrkey->last_status = sts;
+
+	input_report_key(pwrkey->input, pwrkey->code, sts);
+	input_sync(pwrkey->input);
+
+	return IRQ_HANDLED;
+}
+
+static int pm8941_pwrkey_sw_debounce_init(struct pm8941_pwrkey *pwrkey)
+{
+	unsigned int val, addr, mask;
+	int error;
+
+	if (pwrkey->data->has_pon_pbs && !pwrkey->pon_pbs_baseaddr) {
+		dev_err(pwrkey->dev,
+			"PON_PBS address missing, can't read HW debounce time\n");
+		return 0;
+	}
+
+	if (pwrkey->pon_pbs_baseaddr)
+		addr = pwrkey->pon_pbs_baseaddr + PON_DBC_CTL;
+	else
+		addr = pwrkey->baseaddr + PON_DBC_CTL;
+	error = regmap_read(pwrkey->regmap, addr, &val);
+	if (error)
+		return error;
+
+	if (pwrkey->subtype >= PON_SUBTYPE_GEN2_PRIMARY)
+		mask = 0xf;
+	else
+		mask = 0x7;
+
+	pwrkey->sw_debounce_time_us =
+		2 * USEC_PER_SEC / (1 << (mask - (val & mask)));
+
+	dev_dbg(pwrkey->dev, "SW debounce time = %u us\n",
+		pwrkey->sw_debounce_time_us);
+
+	return 0;
+}
+
+static int __maybe_unused pm8941_pwrkey_suspend(struct device *dev)
+{
+	struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(pwrkey->irq);
+
+	return 0;
+}
+
+static int __maybe_unused pm8941_pwrkey_resume(struct device *dev)
+{
+	struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(pwrkey->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(pm8941_pwr_key_pm_ops,
+			 pm8941_pwrkey_suspend, pm8941_pwrkey_resume);
+
+static int pm8941_pwrkey_probe(struct platform_device *pdev)
+{
+	struct pm8941_pwrkey *pwrkey;
+	bool pull_up;
+	struct device *parent;
+	struct device_node *regmap_node;
+	const __be32 *addr;
+	u32 req_delay;
+	int error;
+
+	if (of_property_read_u32(pdev->dev.of_node, "debounce", &req_delay))
+		req_delay = 15625;
+
+	if (req_delay > 2000000 || req_delay == 0) {
+		dev_err(&pdev->dev, "invalid debounce time: %u\n", req_delay);
+		return -EINVAL;
+	}
+
+	pull_up = of_property_read_bool(pdev->dev.of_node, "bias-pull-up");
+
+	pwrkey = devm_kzalloc(&pdev->dev, sizeof(*pwrkey), GFP_KERNEL);
+	if (!pwrkey)
+		return -ENOMEM;
+
+	pwrkey->dev = &pdev->dev;
+	pwrkey->data = of_device_get_match_data(&pdev->dev);
+
+	parent = pdev->dev.parent;
+	regmap_node = pdev->dev.of_node;
+	pwrkey->regmap = dev_get_regmap(parent, NULL);
+	if (!pwrkey->regmap) {
+		regmap_node = parent->of_node;
+		/*
+		 * We failed to get regmap for parent. Let's see if we are
+		 * a child of pon node and read regmap and reg from its
+		 * parent.
+		 */
+		pwrkey->regmap = dev_get_regmap(parent->parent, NULL);
+		if (!pwrkey->regmap) {
+			dev_err(&pdev->dev, "failed to locate regmap\n");
+			return -ENODEV;
+		}
+	}
+
+	addr = of_get_address(regmap_node, 0, NULL, NULL);
+	if (!addr) {
+		dev_err(&pdev->dev, "reg property missing\n");
+		return -EINVAL;
+	}
+	pwrkey->baseaddr = be32_to_cpup(addr);
+
+	if (pwrkey->data->has_pon_pbs) {
+		/* PON_PBS base address is optional */
+		addr = of_get_address(regmap_node, 1, NULL, NULL);
+		if (addr)
+			pwrkey->pon_pbs_baseaddr = be32_to_cpup(addr);
+	}
+
+	pwrkey->irq = platform_get_irq(pdev, 0);
+	if (pwrkey->irq < 0)
+		return pwrkey->irq;
+
+	error = regmap_read(pwrkey->regmap, pwrkey->baseaddr + PON_REV2,
+			    &pwrkey->revision);
+	if (error) {
+		dev_err(&pdev->dev, "failed to read revision: %d\n", error);
+		return error;
+	}
+
+	error = regmap_read(pwrkey->regmap, pwrkey->baseaddr + PON_SUBTYPE,
+			    &pwrkey->subtype);
+	if (error) {
+		dev_err(&pdev->dev, "failed to read subtype: %d\n", error);
+		return error;
+	}
+
+	error = of_property_read_u32(pdev->dev.of_node, "linux,code",
+				     &pwrkey->code);
+	if (error) {
+		dev_dbg(&pdev->dev,
+			"no linux,code assuming power (%d)\n", error);
+		pwrkey->code = KEY_POWER;
+	}
+
+	pwrkey->input = devm_input_allocate_device(&pdev->dev);
+	if (!pwrkey->input) {
+		dev_dbg(&pdev->dev, "unable to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	input_set_capability(pwrkey->input, EV_KEY, pwrkey->code);
+
+	pwrkey->input->name = pwrkey->data->name;
+	pwrkey->input->phys = pwrkey->data->phys;
+
+	if (pwrkey->data->supports_debounce_config) {
+		req_delay = (req_delay << 6) / USEC_PER_SEC;
+		req_delay = ilog2(req_delay);
+
+		error = regmap_update_bits(pwrkey->regmap,
+					   pwrkey->baseaddr + PON_DBC_CTL,
+					   PON_DBC_DELAY_MASK,
+					   req_delay);
+		if (error) {
+			dev_err(&pdev->dev, "failed to set debounce: %d\n",
+				error);
+			return error;
+		}
+	}
+
+	error = pm8941_pwrkey_sw_debounce_init(pwrkey);
+	if (error)
+		return error;
+
+	if (pwrkey->data->pull_up_bit) {
+		error = regmap_update_bits(pwrkey->regmap,
+					   pwrkey->baseaddr + PON_PULL_CTL,
+					   pwrkey->data->pull_up_bit,
+					   pull_up ? pwrkey->data->pull_up_bit :
+						     0);
+		if (error) {
+			dev_err(&pdev->dev, "failed to set pull: %d\n", error);
+			return error;
+		}
+	}
+
+	error = devm_request_threaded_irq(&pdev->dev, pwrkey->irq,
+					  NULL, pm8941_pwrkey_irq,
+					  IRQF_ONESHOT,
+					  pwrkey->data->name, pwrkey);
+	if (error) {
+		dev_err(&pdev->dev, "failed requesting IRQ: %d\n", error);
+		return error;
+	}
+
+	error = input_register_device(pwrkey->input);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device: %d\n",
+			error);
+		return error;
+	}
+
+	if (pwrkey->data->supports_ps_hold_poff_config) {
+		pwrkey->reboot_notifier.notifier_call = pm8941_reboot_notify;
+		error = register_reboot_notifier(&pwrkey->reboot_notifier);
+		if (error) {
+			dev_err(&pdev->dev, "failed to register reboot notifier: %d\n",
+				error);
+			return error;
+		}
+	}
+
+	platform_set_drvdata(pdev, pwrkey);
+	device_init_wakeup(&pdev->dev, 1);
+
+	return 0;
+}
+
+static int pm8941_pwrkey_remove(struct platform_device *pdev)
+{
+	struct pm8941_pwrkey *pwrkey = platform_get_drvdata(pdev);
+
+	if (pwrkey->data->supports_ps_hold_poff_config)
+		unregister_reboot_notifier(&pwrkey->reboot_notifier);
+
+	return 0;
+}
+
+static const struct pm8941_data pwrkey_data = {
+	.pull_up_bit = PON_KPDPWR_PULL_UP,
+	.status_bit = PON_KPDPWR_N_SET,
+	.name = "pm8941_pwrkey",
+	.phys = "pm8941_pwrkey/input0",
+	.supports_ps_hold_poff_config = true,
+	.supports_debounce_config = true,
+	.has_pon_pbs = false,
+};
+
+static const struct pm8941_data resin_data = {
+	.pull_up_bit = PON_RESIN_PULL_UP,
+	.status_bit = PON_RESIN_N_SET,
+	.name = "pm8941_resin",
+	.phys = "pm8941_resin/input0",
+	.supports_ps_hold_poff_config = true,
+	.supports_debounce_config = true,
+	.has_pon_pbs = false,
+};
+
+static const struct pm8941_data pon_gen3_pwrkey_data = {
+	.status_bit = PON_GEN3_KPDPWR_N_SET,
+	.name = "pmic_pwrkey",
+	.phys = "pmic_pwrkey/input0",
+	.supports_ps_hold_poff_config = false,
+	.supports_debounce_config = false,
+	.has_pon_pbs = true,
+};
+
+static const struct pm8941_data pon_gen3_resin_data = {
+	.status_bit = PON_GEN3_RESIN_N_SET,
+	.name = "pmic_resin",
+	.phys = "pmic_resin/input0",
+	.supports_ps_hold_poff_config = false,
+	.supports_debounce_config = false,
+	.has_pon_pbs = true,
+};
+
+static const struct of_device_id pm8941_pwr_key_id_table[] = {
+	{ .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data },
+	{ .compatible = "qcom,pm8941-resin", .data = &resin_data },
+	{ .compatible = "qcom,pmk8350-pwrkey", .data = &pon_gen3_pwrkey_data },
+	{ .compatible = "qcom,pmk8350-resin", .data = &pon_gen3_resin_data },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table);
+
+static struct platform_driver pm8941_pwrkey_driver = {
+	.probe = pm8941_pwrkey_probe,
+	.remove = pm8941_pwrkey_remove,
+	.driver = {
+		.name = "pm8941-pwrkey",
+		.pm = &pm8941_pwr_key_pm_ops,
+		.of_match_table = of_match_ptr(pm8941_pwr_key_id_table),
+	},
+};
+module_platform_driver(pm8941_pwrkey_driver);
+
+MODULE_DESCRIPTION("PM8941 Power Key driver");
+MODULE_LICENSE("GPL v2");