Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 664 insertions, 0 deletions

diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c
new file mode 100644
index 000000000..6487c8c60
--- /dev/null
+++ b/drivers/input/mouse/synaptics_i2c.c
@@ -0,0 +1,664 @@
+/*
+ * Synaptics touchpad with I2C interface
+ *
+ * Copyright (C) 2009 Compulab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ * Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+#include <linux/pm.h>
+
+#define DRIVER_NAME		"synaptics_i2c"
+/* maximum product id is 15 characters */
+#define PRODUCT_ID_LENGTH	15
+#define REGISTER_LENGTH		8
+
+/*
+ * after soft reset, we should wait for 1 ms
+ * before the device becomes operational
+ */
+#define SOFT_RESET_DELAY_US	3000
+/* and after hard reset, we should wait for max 500ms */
+#define HARD_RESET_DELAY_MS	500
+
+/* Registers by SMBus address */
+#define PAGE_SEL_REG		0xff
+#define DEVICE_STATUS_REG	0x09
+
+/* Registers by RMI address */
+#define DEV_CONTROL_REG		0x0000
+#define INTERRUPT_EN_REG	0x0001
+#define ERR_STAT_REG		0x0002
+#define INT_REQ_STAT_REG	0x0003
+#define DEV_COMMAND_REG		0x0004
+
+#define RMI_PROT_VER_REG	0x0200
+#define MANUFACT_ID_REG		0x0201
+#define PHYS_INT_VER_REG	0x0202
+#define PROD_PROPERTY_REG	0x0203
+#define INFO_QUERY_REG0		0x0204
+#define INFO_QUERY_REG1		(INFO_QUERY_REG0 + 1)
+#define INFO_QUERY_REG2		(INFO_QUERY_REG0 + 2)
+#define INFO_QUERY_REG3		(INFO_QUERY_REG0 + 3)
+
+#define PRODUCT_ID_REG0		0x0210
+#define PRODUCT_ID_REG1		(PRODUCT_ID_REG0 + 1)
+#define PRODUCT_ID_REG2		(PRODUCT_ID_REG0 + 2)
+#define PRODUCT_ID_REG3		(PRODUCT_ID_REG0 + 3)
+#define PRODUCT_ID_REG4		(PRODUCT_ID_REG0 + 4)
+#define PRODUCT_ID_REG5		(PRODUCT_ID_REG0 + 5)
+#define PRODUCT_ID_REG6		(PRODUCT_ID_REG0 + 6)
+#define PRODUCT_ID_REG7		(PRODUCT_ID_REG0 + 7)
+#define PRODUCT_ID_REG8		(PRODUCT_ID_REG0 + 8)
+#define PRODUCT_ID_REG9		(PRODUCT_ID_REG0 + 9)
+#define PRODUCT_ID_REG10	(PRODUCT_ID_REG0 + 10)
+#define PRODUCT_ID_REG11	(PRODUCT_ID_REG0 + 11)
+#define PRODUCT_ID_REG12	(PRODUCT_ID_REG0 + 12)
+#define PRODUCT_ID_REG13	(PRODUCT_ID_REG0 + 13)
+#define PRODUCT_ID_REG14	(PRODUCT_ID_REG0 + 14)
+#define PRODUCT_ID_REG15	(PRODUCT_ID_REG0 + 15)
+
+#define DATA_REG0		0x0400
+#define ABS_PRESSURE_REG	0x0401
+#define ABS_MSB_X_REG		0x0402
+#define ABS_LSB_X_REG		(ABS_MSB_X_REG + 1)
+#define ABS_MSB_Y_REG		0x0404
+#define ABS_LSB_Y_REG		(ABS_MSB_Y_REG + 1)
+#define REL_X_REG		0x0406
+#define REL_Y_REG		0x0407
+
+#define DEV_QUERY_REG0		0x1000
+#define DEV_QUERY_REG1		(DEV_QUERY_REG0 + 1)
+#define DEV_QUERY_REG2		(DEV_QUERY_REG0 + 2)
+#define DEV_QUERY_REG3		(DEV_QUERY_REG0 + 3)
+#define DEV_QUERY_REG4		(DEV_QUERY_REG0 + 4)
+#define DEV_QUERY_REG5		(DEV_QUERY_REG0 + 5)
+#define DEV_QUERY_REG6		(DEV_QUERY_REG0 + 6)
+#define DEV_QUERY_REG7		(DEV_QUERY_REG0 + 7)
+#define DEV_QUERY_REG8		(DEV_QUERY_REG0 + 8)
+
+#define GENERAL_2D_CONTROL_REG	0x1041
+#define SENSOR_SENSITIVITY_REG	0x1044
+#define SENS_MAX_POS_MSB_REG	0x1046
+#define SENS_MAX_POS_LSB_REG	(SENS_MAX_POS_UPPER_REG + 1)
+
+/* Register bits */
+/* Device Control Register Bits */
+#define REPORT_RATE_1ST_BIT	6
+
+/* Interrupt Enable Register Bits (INTERRUPT_EN_REG) */
+#define F10_ABS_INT_ENA		0
+#define F10_REL_INT_ENA		1
+#define F20_INT_ENA		2
+
+/* Interrupt Request Register Bits (INT_REQ_STAT_REG | DEVICE_STATUS_REG) */
+#define F10_ABS_INT_REQ		0
+#define F10_REL_INT_REQ		1
+#define F20_INT_REQ		2
+/* Device Status Register Bits (DEVICE_STATUS_REG) */
+#define STAT_CONFIGURED		6
+#define STAT_ERROR		7
+
+/* Device Command Register Bits (DEV_COMMAND_REG) */
+#define RESET_COMMAND		0x01
+#define REZERO_COMMAND		0x02
+
+/* Data Register 0 Bits (DATA_REG0) */
+#define GESTURE			3
+
+/* Device Query Registers Bits */
+/* DEV_QUERY_REG3 */
+#define HAS_PALM_DETECT		1
+#define HAS_MULTI_FING		2
+#define HAS_SCROLLER		4
+#define HAS_2D_SCROLL		5
+
+/* General 2D Control Register Bits (GENERAL_2D_CONTROL_REG) */
+#define NO_DECELERATION		1
+#define REDUCE_REPORTING	3
+#define NO_FILTER		5
+
+/* Function Masks */
+/* Device Control Register Masks (DEV_CONTROL_REG) */
+#define REPORT_RATE_MSK		0xc0
+#define SLEEP_MODE_MSK		0x07
+
+/* Device Sleep Modes */
+#define FULL_AWAKE		0x0
+#define NORMAL_OP		0x1
+#define LOW_PWR_OP		0x2
+#define VERY_LOW_PWR_OP		0x3
+#define SENS_SLEEP		0x4
+#define SLEEP_MOD		0x5
+#define DEEP_SLEEP		0x6
+#define HIBERNATE		0x7
+
+/* Interrupt Register Mask */
+/* (INT_REQ_STAT_REG | DEVICE_STATUS_REG | INTERRUPT_EN_REG) */
+#define INT_ENA_REQ_MSK		0x07
+#define INT_ENA_ABS_MSK		0x01
+#define INT_ENA_REL_MSK		0x02
+#define INT_ENA_F20_MSK		0x04
+
+/* Device Status Register Masks (DEVICE_STATUS_REG) */
+#define CONFIGURED_MSK		0x40
+#define ERROR_MSK		0x80
+
+/* Data Register 0 Masks */
+#define FINGER_WIDTH_MSK	0xf0
+#define GESTURE_MSK		0x08
+#define SENSOR_STATUS_MSK	0x07
+
+/*
+ * MSB Position Register Masks
+ * ABS_MSB_X_REG | ABS_MSB_Y_REG | SENS_MAX_POS_MSB_REG |
+ * DEV_QUERY_REG3 | DEV_QUERY_REG5
+ */
+#define MSB_POSITION_MSK	0x1f
+
+/* Device Query Registers Masks */
+
+/* DEV_QUERY_REG2 */
+#define NUM_EXTRA_POS_MSK	0x07
+
+/* When in IRQ mode read the device every THREAD_IRQ_SLEEP_SECS */
+#define THREAD_IRQ_SLEEP_SECS	2
+#define THREAD_IRQ_SLEEP_MSECS	(THREAD_IRQ_SLEEP_SECS * MSEC_PER_SEC)
+
+/*
+ * When in Polling mode and no data received for NO_DATA_THRES msecs
+ * reduce the polling rate to NO_DATA_SLEEP_MSECS
+ */
+#define NO_DATA_THRES		(MSEC_PER_SEC)
+#define NO_DATA_SLEEP_MSECS	(MSEC_PER_SEC / 4)
+
+/* Control touchpad's No Deceleration option */
+static bool no_decel = true;
+module_param(no_decel, bool, 0644);
+MODULE_PARM_DESC(no_decel, "No Deceleration. Default = 1 (on)");
+
+/* Control touchpad's Reduced Reporting option */
+static bool reduce_report;
+module_param(reduce_report, bool, 0644);
+MODULE_PARM_DESC(reduce_report, "Reduced Reporting. Default = 0 (off)");
+
+/* Control touchpad's No Filter option */
+static bool no_filter;
+module_param(no_filter, bool, 0644);
+MODULE_PARM_DESC(no_filter, "No Filter. Default = 0 (off)");
+
+/*
+ * touchpad Attention line is Active Low and Open Drain,
+ * therefore should be connected to pulled up line
+ * and the irq configuration should be set to Falling Edge Trigger
+ */
+/* Control IRQ / Polling option */
+static bool polling_req;
+module_param(polling_req, bool, 0444);
+MODULE_PARM_DESC(polling_req, "Request Polling. Default = 0 (use irq)");
+
+/* Control Polling Rate */
+static int scan_rate = 80;
+module_param(scan_rate, int, 0644);
+MODULE_PARM_DESC(scan_rate, "Polling rate in times/sec. Default = 80");
+
+/* The main device structure */
+struct synaptics_i2c {
+	struct i2c_client	*client;
+	struct input_dev	*input;
+	struct delayed_work	dwork;
+	int			no_data_count;
+	int			no_decel_param;
+	int			reduce_report_param;
+	int			no_filter_param;
+	int			scan_rate_param;
+	int			scan_ms;
+};
+
+static inline void set_scan_rate(struct synaptics_i2c *touch, int scan_rate)
+{
+	touch->scan_ms = MSEC_PER_SEC / scan_rate;
+	touch->scan_rate_param = scan_rate;
+}
+
+/*
+ * Driver's initial design makes no race condition possible on i2c bus,
+ * so there is no need in any locking.
+ * Keep it in mind, while playing with the code.
+ */
+static s32 synaptics_i2c_reg_get(struct i2c_client *client, u16 reg)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, PAGE_SEL_REG, reg >> 8);
+	if (ret == 0)
+		ret = i2c_smbus_read_byte_data(client, reg & 0xff);
+
+	return ret;
+}
+
+static s32 synaptics_i2c_reg_set(struct i2c_client *client, u16 reg, u8 val)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, PAGE_SEL_REG, reg >> 8);
+	if (ret == 0)
+		ret = i2c_smbus_write_byte_data(client, reg & 0xff, val);
+
+	return ret;
+}
+
+static s32 synaptics_i2c_word_get(struct i2c_client *client, u16 reg)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, PAGE_SEL_REG, reg >> 8);
+	if (ret == 0)
+		ret = i2c_smbus_read_word_data(client, reg & 0xff);
+
+	return ret;
+}
+
+static int synaptics_i2c_config(struct i2c_client *client)
+{
+	int ret, control;
+	u8 int_en;
+
+	/* set Report Rate to Device Highest (>=80) and Sleep to normal */
+	ret = synaptics_i2c_reg_set(client, DEV_CONTROL_REG, 0xc1);
+	if (ret)
+		return ret;
+
+	/* set Interrupt Disable to Func20 / Enable to Func10) */
+	int_en = (polling_req) ? 0 : INT_ENA_ABS_MSK | INT_ENA_REL_MSK;
+	ret = synaptics_i2c_reg_set(client, INTERRUPT_EN_REG, int_en);
+	if (ret)
+		return ret;
+
+	control = synaptics_i2c_reg_get(client, GENERAL_2D_CONTROL_REG);
+	/* No Deceleration */
+	control |= no_decel ? 1 << NO_DECELERATION : 0;
+	/* Reduced Reporting */
+	control |= reduce_report ? 1 << REDUCE_REPORTING : 0;
+	/* No Filter */
+	control |= no_filter ? 1 << NO_FILTER : 0;
+	ret = synaptics_i2c_reg_set(client, GENERAL_2D_CONTROL_REG, control);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int synaptics_i2c_reset_config(struct i2c_client *client)
+{
+	int ret;
+
+	/* Reset the Touchpad */
+	ret = synaptics_i2c_reg_set(client, DEV_COMMAND_REG, RESET_COMMAND);
+	if (ret) {
+		dev_err(&client->dev, "Unable to reset device\n");
+	} else {
+		usleep_range(SOFT_RESET_DELAY_US, SOFT_RESET_DELAY_US + 100);
+		ret = synaptics_i2c_config(client);
+		if (ret)
+			dev_err(&client->dev, "Unable to config device\n");
+	}
+
+	return ret;
+}
+
+static int synaptics_i2c_check_error(struct i2c_client *client)
+{
+	int status, ret = 0;
+
+	status = i2c_smbus_read_byte_data(client, DEVICE_STATUS_REG) &
+		(CONFIGURED_MSK | ERROR_MSK);
+
+	if (status != CONFIGURED_MSK)
+		ret = synaptics_i2c_reset_config(client);
+
+	return ret;
+}
+
+static bool synaptics_i2c_get_input(struct synaptics_i2c *touch)
+{
+	struct input_dev *input = touch->input;
+	int xy_delta, gesture;
+	s32 data;
+	s8 x_delta, y_delta;
+
+	/* Deal with spontaneous resets and errors */
+	if (synaptics_i2c_check_error(touch->client))
+		return false;
+
+	/* Get Gesture Bit */
+	data = synaptics_i2c_reg_get(touch->client, DATA_REG0);
+	gesture = (data >> GESTURE) & 0x1;
+
+	/*
+	 * Get Relative axes. we have to get them in one shot,
+	 * so we get 2 bytes starting from REL_X_REG.
+	 */
+	xy_delta = synaptics_i2c_word_get(touch->client, REL_X_REG) & 0xffff;
+
+	/* Separate X from Y */
+	x_delta = xy_delta & 0xff;
+	y_delta = (xy_delta >> REGISTER_LENGTH) & 0xff;
+
+	/* Report the button event */
+	input_report_key(input, BTN_LEFT, gesture);
+
+	/* Report the deltas */
+	input_report_rel(input, REL_X, x_delta);
+	input_report_rel(input, REL_Y, -y_delta);
+	input_sync(input);
+
+	return xy_delta || gesture;
+}
+
+static irqreturn_t synaptics_i2c_irq(int irq, void *dev_id)
+{
+	struct synaptics_i2c *touch = dev_id;
+
+	mod_delayed_work(system_wq, &touch->dwork, 0);
+
+	return IRQ_HANDLED;
+}
+
+static void synaptics_i2c_check_params(struct synaptics_i2c *touch)
+{
+	bool reset = false;
+
+	if (scan_rate != touch->scan_rate_param)
+		set_scan_rate(touch, scan_rate);
+
+	if (no_decel != touch->no_decel_param) {
+		touch->no_decel_param = no_decel;
+		reset = true;
+	}
+
+	if (no_filter != touch->no_filter_param) {
+		touch->no_filter_param = no_filter;
+		reset = true;
+	}
+
+	if (reduce_report != touch->reduce_report_param) {
+		touch->reduce_report_param = reduce_report;
+		reset = true;
+	}
+
+	if (reset)
+		synaptics_i2c_reset_config(touch->client);
+}
+
+/* Control the Device polling rate / Work Handler sleep time */
+static unsigned long synaptics_i2c_adjust_delay(struct synaptics_i2c *touch,
+						bool have_data)
+{
+	unsigned long delay, nodata_count_thres;
+
+	if (polling_req) {
+		delay = touch->scan_ms;
+		if (have_data) {
+			touch->no_data_count = 0;
+		} else {
+			nodata_count_thres = NO_DATA_THRES / touch->scan_ms;
+			if (touch->no_data_count < nodata_count_thres)
+				touch->no_data_count++;
+			else
+				delay = NO_DATA_SLEEP_MSECS;
+		}
+		return msecs_to_jiffies(delay);
+	} else {
+		delay = msecs_to_jiffies(THREAD_IRQ_SLEEP_MSECS);
+		return round_jiffies_relative(delay);
+	}
+}
+
+/* Work Handler */
+static void synaptics_i2c_work_handler(struct work_struct *work)
+{
+	bool have_data;
+	struct synaptics_i2c *touch =
+			container_of(work, struct synaptics_i2c, dwork.work);
+	unsigned long delay;
+
+	synaptics_i2c_check_params(touch);
+
+	have_data = synaptics_i2c_get_input(touch);
+	delay = synaptics_i2c_adjust_delay(touch, have_data);
+
+	/*
+	 * While interrupt driven, there is no real need to poll the device.
+	 * But touchpads are very sensitive, so there could be errors
+	 * related to physical environment and the attention line isn't
+	 * necessarily asserted. In such case we can lose the touchpad.
+	 * We poll the device once in THREAD_IRQ_SLEEP_SECS and
+	 * if error is detected, we try to reset and reconfigure the touchpad.
+	 */
+	mod_delayed_work(system_wq, &touch->dwork, delay);
+}
+
+static int synaptics_i2c_open(struct input_dev *input)
+{
+	struct synaptics_i2c *touch = input_get_drvdata(input);
+	int ret;
+
+	ret = synaptics_i2c_reset_config(touch->client);
+	if (ret)
+		return ret;
+
+	if (polling_req)
+		mod_delayed_work(system_wq, &touch->dwork,
+				msecs_to_jiffies(NO_DATA_SLEEP_MSECS));
+
+	return 0;
+}
+
+static void synaptics_i2c_close(struct input_dev *input)
+{
+	struct synaptics_i2c *touch = input_get_drvdata(input);
+
+	if (!polling_req)
+		synaptics_i2c_reg_set(touch->client, INTERRUPT_EN_REG, 0);
+
+	cancel_delayed_work_sync(&touch->dwork);
+
+	/* Save some power */
+	synaptics_i2c_reg_set(touch->client, DEV_CONTROL_REG, DEEP_SLEEP);
+}
+
+static void synaptics_i2c_set_input_params(struct synaptics_i2c *touch)
+{
+	struct input_dev *input = touch->input;
+
+	input->name = touch->client->name;
+	input->phys = touch->client->adapter->name;
+	input->id.bustype = BUS_I2C;
+	input->id.version = synaptics_i2c_word_get(touch->client,
+						   INFO_QUERY_REG0);
+	input->dev.parent = &touch->client->dev;
+	input->open = synaptics_i2c_open;
+	input->close = synaptics_i2c_close;
+	input_set_drvdata(input, touch);
+
+	/* Register the device as mouse */
+	__set_bit(EV_REL, input->evbit);
+	__set_bit(REL_X, input->relbit);
+	__set_bit(REL_Y, input->relbit);
+
+	/* Register device's buttons and keys */
+	__set_bit(EV_KEY, input->evbit);
+	__set_bit(BTN_LEFT, input->keybit);
+}
+
+static struct synaptics_i2c *synaptics_i2c_touch_create(struct i2c_client *client)
+{
+	struct synaptics_i2c *touch;
+
+	touch = kzalloc(sizeof(struct synaptics_i2c), GFP_KERNEL);
+	if (!touch)
+		return NULL;
+
+	touch->client = client;
+	touch->no_decel_param = no_decel;
+	touch->scan_rate_param = scan_rate;
+	set_scan_rate(touch, scan_rate);
+	INIT_DELAYED_WORK(&touch->dwork, synaptics_i2c_work_handler);
+
+	return touch;
+}
+
+static int synaptics_i2c_probe(struct i2c_client *client)
+{
+	int ret;
+	struct synaptics_i2c *touch;
+
+	touch = synaptics_i2c_touch_create(client);
+	if (!touch)
+		return -ENOMEM;
+
+	ret = synaptics_i2c_reset_config(client);
+	if (ret)
+		goto err_mem_free;
+
+	if (client->irq < 1)
+		polling_req = true;
+
+	touch->input = input_allocate_device();
+	if (!touch->input) {
+		ret = -ENOMEM;
+		goto err_mem_free;
+	}
+
+	synaptics_i2c_set_input_params(touch);
+
+	if (!polling_req) {
+		dev_dbg(&touch->client->dev,
+			 "Requesting IRQ: %d\n", touch->client->irq);
+
+		ret = request_irq(touch->client->irq, synaptics_i2c_irq,
+				  IRQ_TYPE_EDGE_FALLING,
+				  DRIVER_NAME, touch);
+		if (ret) {
+			dev_warn(&touch->client->dev,
+				  "IRQ request failed: %d, "
+				  "falling back to polling\n", ret);
+			polling_req = true;
+			synaptics_i2c_reg_set(touch->client,
+					      INTERRUPT_EN_REG, 0);
+		}
+	}
+
+	if (polling_req)
+		dev_dbg(&touch->client->dev,
+			 "Using polling at rate: %d times/sec\n", scan_rate);
+
+	/* Register the device in input subsystem */
+	ret = input_register_device(touch->input);
+	if (ret) {
+		dev_err(&client->dev,
+			 "Input device register failed: %d\n", ret);
+		goto err_input_free;
+	}
+
+	i2c_set_clientdata(client, touch);
+
+	return 0;
+
+err_input_free:
+	input_free_device(touch->input);
+err_mem_free:
+	kfree(touch);
+
+	return ret;
+}
+
+static void synaptics_i2c_remove(struct i2c_client *client)
+{
+	struct synaptics_i2c *touch = i2c_get_clientdata(client);
+
+	if (!polling_req)
+		free_irq(client->irq, touch);
+
+	input_unregister_device(touch->input);
+	kfree(touch);
+}
+
+static int __maybe_unused synaptics_i2c_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct synaptics_i2c *touch = i2c_get_clientdata(client);
+
+	cancel_delayed_work_sync(&touch->dwork);
+
+	/* Save some power */
+	synaptics_i2c_reg_set(touch->client, DEV_CONTROL_REG, DEEP_SLEEP);
+
+	return 0;
+}
+
+static int __maybe_unused synaptics_i2c_resume(struct device *dev)
+{
+	int ret;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct synaptics_i2c *touch = i2c_get_clientdata(client);
+
+	ret = synaptics_i2c_reset_config(client);
+	if (ret)
+		return ret;
+
+	mod_delayed_work(system_wq, &touch->dwork,
+				msecs_to_jiffies(NO_DATA_SLEEP_MSECS));
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(synaptics_i2c_pm, synaptics_i2c_suspend,
+			 synaptics_i2c_resume);
+
+static const struct i2c_device_id synaptics_i2c_id_table[] = {
+	{ "synaptics_i2c", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, synaptics_i2c_id_table);
+
+#ifdef CONFIG_OF
+static const struct of_device_id synaptics_i2c_of_match[] = {
+	{ .compatible = "synaptics,synaptics_i2c", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, synaptics_i2c_of_match);
+#endif
+
+static struct i2c_driver synaptics_i2c_driver = {
+	.driver = {
+		.name	= DRIVER_NAME,
+		.of_match_table = of_match_ptr(synaptics_i2c_of_match),
+		.pm	= &synaptics_i2c_pm,
+	},
+
+	.probe_new	= synaptics_i2c_probe,
+	.remove		= synaptics_i2c_remove,
+
+	.id_table	= synaptics_i2c_id_table,
+};
+
+module_i2c_driver(synaptics_i2c_driver);
+
+MODULE_DESCRIPTION("Synaptics I2C touchpad driver");
+MODULE_AUTHOR("Mike Rapoport, Igor Grinberg, Compulab");
+MODULE_LICENSE("GPL");
+