Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 199 insertions, 0 deletions

diff --git a/drivers/input/rmi4/rmi_bus.h b/drivers/input/rmi4/rmi_bus.h
new file mode 100644
index 000000000..25df6320f
--- /dev/null
+++ b/drivers/input/rmi4/rmi_bus.h
@@ -0,0 +1,199 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2011-2016 Synaptics Incorporated
+ * Copyright (c) 2011 Unixphere
+ */
+
+#ifndef _RMI_BUS_H
+#define _RMI_BUS_H
+
+#include <linux/rmi.h>
+
+struct rmi_device;
+
+/*
+ * The interrupt source count in the function descriptor can represent up to
+ * 6 interrupt sources in the normal manner.
+ */
+#define RMI_FN_MAX_IRQS	6
+
+/**
+ * struct rmi_function - represents the implementation of an RMI4
+ * function for a particular device (basically, a driver for that RMI4 function)
+ *
+ * @fd: The function descriptor of the RMI function
+ * @rmi_dev: Pointer to the RMI device associated with this function container
+ * @dev: The device associated with this particular function.
+ *
+ * @num_of_irqs: The number of irqs needed by this function
+ * @irq_pos: The position in the irq bitfield this function holds
+ * @irq_mask: For convenience, can be used to mask IRQ bits off during ATTN
+ * interrupt handling.
+ * @irqs: assigned virq numbers (up to num_of_irqs)
+ *
+ * @node: entry in device's list of functions
+ */
+struct rmi_function {
+	struct rmi_function_descriptor fd;
+	struct rmi_device *rmi_dev;
+	struct device dev;
+	struct list_head node;
+
+	unsigned int num_of_irqs;
+	int irq[RMI_FN_MAX_IRQS];
+	unsigned int irq_pos;
+	unsigned long irq_mask[];
+};
+
+#define to_rmi_function(d)	container_of(d, struct rmi_function, dev)
+
+bool rmi_is_function_device(struct device *dev);
+
+int __must_check rmi_register_function(struct rmi_function *);
+void rmi_unregister_function(struct rmi_function *);
+
+/**
+ * struct rmi_function_handler - driver routines for a particular RMI function.
+ *
+ * @func: The RMI function number
+ * @reset: Called when a reset of the touch sensor is detected.  The routine
+ * should perform any out-of-the-ordinary reset handling that might be
+ * necessary.  Restoring of touch sensor configuration registers should be
+ * handled in the config() callback, below.
+ * @config: Called when the function container is first initialized, and
+ * after a reset is detected.  This routine should write any necessary
+ * configuration settings to the device.
+ * @attention: Called when the IRQ(s) for the function are set by the touch
+ * sensor.
+ * @suspend: Should perform any required operations to suspend the particular
+ * function.
+ * @resume: Should perform any required operations to resume the particular
+ * function.
+ *
+ * All callbacks are expected to return 0 on success, error code on failure.
+ */
+struct rmi_function_handler {
+	struct device_driver driver;
+
+	u8 func;
+
+	int (*probe)(struct rmi_function *fn);
+	void (*remove)(struct rmi_function *fn);
+	int (*config)(struct rmi_function *fn);
+	int (*reset)(struct rmi_function *fn);
+	irqreturn_t (*attention)(int irq, void *ctx);
+	int (*suspend)(struct rmi_function *fn);
+	int (*resume)(struct rmi_function *fn);
+};
+
+#define to_rmi_function_handler(d) \
+		container_of(d, struct rmi_function_handler, driver)
+
+int __must_check __rmi_register_function_handler(struct rmi_function_handler *,
+						 struct module *, const char *);
+#define rmi_register_function_handler(handler) \
+	__rmi_register_function_handler(handler, THIS_MODULE, KBUILD_MODNAME)
+
+void rmi_unregister_function_handler(struct rmi_function_handler *);
+
+#define to_rmi_driver(d) \
+	container_of(d, struct rmi_driver, driver)
+
+#define to_rmi_device(d) container_of(d, struct rmi_device, dev)
+
+static inline struct rmi_device_platform_data *
+rmi_get_platform_data(struct rmi_device *d)
+{
+	return &d->xport->pdata;
+}
+
+bool rmi_is_physical_device(struct device *dev);
+
+/**
+ * rmi_reset - reset a RMI4 device
+ * @d: Pointer to an RMI device
+ *
+ * Calls for a reset of each function implemented by a specific device.
+ * Returns 0 on success or a negative error code.
+ */
+static inline int rmi_reset(struct rmi_device *d)
+{
+	return d->driver->reset_handler(d);
+}
+
+/**
+ * rmi_read - read a single byte
+ * @d: Pointer to an RMI device
+ * @addr: The address to read from
+ * @buf: The read buffer
+ *
+ * Reads a single byte of data using the underlying transport protocol
+ * into memory pointed by @buf. It returns 0 on success or a negative
+ * error code.
+ */
+static inline int rmi_read(struct rmi_device *d, u16 addr, u8 *buf)
+{
+	return d->xport->ops->read_block(d->xport, addr, buf, 1);
+}
+
+/**
+ * rmi_read_block - read a block of bytes
+ * @d: Pointer to an RMI device
+ * @addr: The start address to read from
+ * @buf: The read buffer
+ * @len: Length of the read buffer
+ *
+ * Reads a block of byte data using the underlying transport protocol
+ * into memory pointed by @buf. It returns 0 on success or a negative
+ * error code.
+ */
+static inline int rmi_read_block(struct rmi_device *d, u16 addr,
+				 void *buf, size_t len)
+{
+	return d->xport->ops->read_block(d->xport, addr, buf, len);
+}
+
+/**
+ * rmi_write - write a single byte
+ * @d: Pointer to an RMI device
+ * @addr: The address to write to
+ * @data: The data to write
+ *
+ * Writes a single byte using the underlying transport protocol. It
+ * returns zero on success or a negative error code.
+ */
+static inline int rmi_write(struct rmi_device *d, u16 addr, u8 data)
+{
+	return d->xport->ops->write_block(d->xport, addr, &data, 1);
+}
+
+/**
+ * rmi_write_block - write a block of bytes
+ * @d: Pointer to an RMI device
+ * @addr: The start address to write to
+ * @buf: The write buffer
+ * @len: Length of the write buffer
+ *
+ * Writes a block of byte data from buf using the underlaying transport
+ * protocol.  It returns the amount of bytes written or a negative error code.
+ */
+static inline int rmi_write_block(struct rmi_device *d, u16 addr,
+				  const void *buf, size_t len)
+{
+	return d->xport->ops->write_block(d->xport, addr, buf, len);
+}
+
+int rmi_for_each_dev(void *data, int (*func)(struct device *dev, void *data));
+
+extern struct bus_type rmi_bus_type;
+
+int rmi_of_property_read_u32(struct device *dev, u32 *result,
+				const char *prop, bool optional);
+
+#define RMI_DEBUG_CORE			BIT(0)
+#define RMI_DEBUG_XPORT			BIT(1)
+#define RMI_DEBUG_FN			BIT(2)
+#define RMI_DEBUG_2D_SENSOR		BIT(3)
+
+void rmi_dbg(int flags, struct device *dev, const char *fmt, ...);
+#endif