Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 736 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/cyttsp_core.c b/drivers/input/touchscreen/cyttsp_core.c
new file mode 100644
index 000000000..1dbd849c9
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp_core.c
@@ -0,0 +1,736 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Core Source for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/property.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+
+#include "cyttsp_core.h"
+
+/* Bootloader number of command keys */
+#define CY_NUM_BL_KEYS		8
+
+/* helpers */
+#define GET_NUM_TOUCHES(x)		((x) & 0x0F)
+#define IS_LARGE_AREA(x)		(((x) & 0x10) >> 4)
+#define IS_BAD_PKT(x)			((x) & 0x20)
+#define IS_VALID_APP(x)			((x) & 0x01)
+#define IS_OPERATIONAL_ERR(x)		((x) & 0x3F)
+#define GET_HSTMODE(reg)		(((reg) & 0x70) >> 4)
+#define GET_BOOTLOADERMODE(reg)		(((reg) & 0x10) >> 4)
+
+#define CY_REG_BASE			0x00
+#define CY_REG_ACT_DIST			0x1E
+#define CY_REG_ACT_INTRVL		0x1D
+#define CY_REG_TCH_TMOUT		(CY_REG_ACT_INTRVL + 1)
+#define CY_REG_LP_INTRVL		(CY_REG_TCH_TMOUT + 1)
+#define CY_MAXZ				255
+#define CY_DELAY_DFLT			20 /* ms */
+#define CY_DELAY_MAX			500
+/* Active distance in pixels for a gesture to be reported */
+#define CY_ACT_DIST_DFLT		0xF8 /* pixels */
+#define CY_ACT_DIST_MASK		0x0F
+/* Active Power state scanning/processing refresh interval */
+#define CY_ACT_INTRVL_DFLT		0x00 /* ms */
+/* Low Power state scanning/processing refresh interval */
+#define CY_LP_INTRVL_DFLT		0x0A /* ms */
+/* touch timeout for the Active power */
+#define CY_TCH_TMOUT_DFLT		0xFF /* ms */
+#define CY_HNDSHK_BIT			0x80
+/* device mode bits */
+#define CY_OPERATE_MODE			0x00
+#define CY_SYSINFO_MODE			0x10
+/* power mode select bits */
+#define CY_SOFT_RESET_MODE		0x01 /* return to Bootloader mode */
+#define CY_DEEP_SLEEP_MODE		0x02
+#define CY_LOW_POWER_MODE		0x04
+
+/* Slots management */
+#define CY_MAX_FINGER			4
+#define CY_MAX_ID			16
+
+static const u8 bl_command[] = {
+	0x00,			/* file offset */
+	0xFF,			/* command */
+	0xA5,			/* exit bootloader command */
+	0, 1, 2, 3, 4, 5, 6, 7	/* default keys */
+};
+
+static int ttsp_read_block_data(struct cyttsp *ts, u8 command,
+				u8 length, void *buf)
+{
+	int error;
+	int tries;
+
+	for (tries = 0; tries < CY_NUM_RETRY; tries++) {
+		error = ts->bus_ops->read(ts->dev, ts->xfer_buf, command,
+				length, buf);
+		if (!error)
+			return 0;
+
+		msleep(CY_DELAY_DFLT);
+	}
+
+	return -EIO;
+}
+
+static int ttsp_write_block_data(struct cyttsp *ts, u8 command,
+				 u8 length, void *buf)
+{
+	int error;
+	int tries;
+
+	for (tries = 0; tries < CY_NUM_RETRY; tries++) {
+		error = ts->bus_ops->write(ts->dev, ts->xfer_buf, command,
+				length, buf);
+		if (!error)
+			return 0;
+
+		msleep(CY_DELAY_DFLT);
+	}
+
+	return -EIO;
+}
+
+static int ttsp_send_command(struct cyttsp *ts, u8 cmd)
+{
+	return ttsp_write_block_data(ts, CY_REG_BASE, sizeof(cmd), &cmd);
+}
+
+static int cyttsp_handshake(struct cyttsp *ts)
+{
+	if (ts->use_hndshk)
+		return ttsp_send_command(ts,
+				ts->xy_data.hst_mode ^ CY_HNDSHK_BIT);
+
+	return 0;
+}
+
+static int cyttsp_load_bl_regs(struct cyttsp *ts)
+{
+	memset(&ts->bl_data, 0, sizeof(ts->bl_data));
+	ts->bl_data.bl_status = 0x10;
+
+	return ttsp_read_block_data(ts, CY_REG_BASE,
+				    sizeof(ts->bl_data), &ts->bl_data);
+}
+
+static int cyttsp_exit_bl_mode(struct cyttsp *ts)
+{
+	int error;
+	u8 bl_cmd[sizeof(bl_command)];
+
+	memcpy(bl_cmd, bl_command, sizeof(bl_command));
+	if (ts->bl_keys)
+		memcpy(&bl_cmd[sizeof(bl_command) - CY_NUM_BL_KEYS],
+			ts->bl_keys, CY_NUM_BL_KEYS);
+
+	error = ttsp_write_block_data(ts, CY_REG_BASE,
+				      sizeof(bl_cmd), bl_cmd);
+	if (error)
+		return error;
+
+	/* wait for TTSP Device to complete the operation */
+	msleep(CY_DELAY_DFLT);
+
+	error = cyttsp_load_bl_regs(ts);
+	if (error)
+		return error;
+
+	if (GET_BOOTLOADERMODE(ts->bl_data.bl_status))
+		return -EIO;
+
+	return 0;
+}
+
+static int cyttsp_set_operational_mode(struct cyttsp *ts)
+{
+	int error;
+
+	error = ttsp_send_command(ts, CY_OPERATE_MODE);
+	if (error)
+		return error;
+
+	/* wait for TTSP Device to complete switch to Operational mode */
+	error = ttsp_read_block_data(ts, CY_REG_BASE,
+				     sizeof(ts->xy_data), &ts->xy_data);
+	if (error)
+		return error;
+
+	error = cyttsp_handshake(ts);
+	if (error)
+		return error;
+
+	return ts->xy_data.act_dist == CY_ACT_DIST_DFLT ? -EIO : 0;
+}
+
+static int cyttsp_set_sysinfo_mode(struct cyttsp *ts)
+{
+	int error;
+
+	memset(&ts->sysinfo_data, 0, sizeof(ts->sysinfo_data));
+
+	/* switch to sysinfo mode */
+	error = ttsp_send_command(ts, CY_SYSINFO_MODE);
+	if (error)
+		return error;
+
+	/* read sysinfo registers */
+	msleep(CY_DELAY_DFLT);
+	error = ttsp_read_block_data(ts, CY_REG_BASE, sizeof(ts->sysinfo_data),
+				      &ts->sysinfo_data);
+	if (error)
+		return error;
+
+	error = cyttsp_handshake(ts);
+	if (error)
+		return error;
+
+	if (!ts->sysinfo_data.tts_verh && !ts->sysinfo_data.tts_verl)
+		return -EIO;
+
+	return 0;
+}
+
+static int cyttsp_set_sysinfo_regs(struct cyttsp *ts)
+{
+	int retval = 0;
+
+	if (ts->act_intrvl != CY_ACT_INTRVL_DFLT ||
+	    ts->tch_tmout != CY_TCH_TMOUT_DFLT ||
+	    ts->lp_intrvl != CY_LP_INTRVL_DFLT) {
+
+		u8 intrvl_ray[] = {
+			ts->act_intrvl,
+			ts->tch_tmout,
+			ts->lp_intrvl
+		};
+
+		/* set intrvl registers */
+		retval = ttsp_write_block_data(ts, CY_REG_ACT_INTRVL,
+					sizeof(intrvl_ray), intrvl_ray);
+		msleep(CY_DELAY_DFLT);
+	}
+
+	return retval;
+}
+
+static void cyttsp_hard_reset(struct cyttsp *ts)
+{
+	if (ts->reset_gpio) {
+		/*
+		 * According to the CY8CTMA340 datasheet page 21, the external
+		 * reset pulse width should be >= 1 ms. The datasheet does not
+		 * specify how long we have to wait after reset but a vendor
+		 * tree specifies 5 ms here.
+		 */
+		gpiod_set_value_cansleep(ts->reset_gpio, 1);
+		usleep_range(1000, 2000);
+		gpiod_set_value_cansleep(ts->reset_gpio, 0);
+		usleep_range(5000, 6000);
+	}
+}
+
+static int cyttsp_soft_reset(struct cyttsp *ts)
+{
+	int retval;
+
+	/* wait for interrupt to set ready completion */
+	reinit_completion(&ts->bl_ready);
+	ts->state = CY_BL_STATE;
+
+	enable_irq(ts->irq);
+
+	retval = ttsp_send_command(ts, CY_SOFT_RESET_MODE);
+	if (retval) {
+		dev_err(ts->dev, "failed to send soft reset\n");
+		goto out;
+	}
+
+	if (!wait_for_completion_timeout(&ts->bl_ready,
+			msecs_to_jiffies(CY_DELAY_DFLT * CY_DELAY_MAX))) {
+		dev_err(ts->dev, "timeout waiting for soft reset\n");
+		retval = -EIO;
+	}
+
+out:
+	ts->state = CY_IDLE_STATE;
+	disable_irq(ts->irq);
+	return retval;
+}
+
+static int cyttsp_act_dist_setup(struct cyttsp *ts)
+{
+	u8 act_dist_setup = ts->act_dist;
+
+	/* Init gesture; active distance setup */
+	return ttsp_write_block_data(ts, CY_REG_ACT_DIST,
+				sizeof(act_dist_setup), &act_dist_setup);
+}
+
+static void cyttsp_extract_track_ids(struct cyttsp_xydata *xy_data, int *ids)
+{
+	ids[0] = xy_data->touch12_id >> 4;
+	ids[1] = xy_data->touch12_id & 0xF;
+	ids[2] = xy_data->touch34_id >> 4;
+	ids[3] = xy_data->touch34_id & 0xF;
+}
+
+static const struct cyttsp_tch *cyttsp_get_tch(struct cyttsp_xydata *xy_data,
+					       int idx)
+{
+	switch (idx) {
+	case 0:
+		return &xy_data->tch1;
+	case 1:
+		return &xy_data->tch2;
+	case 2:
+		return &xy_data->tch3;
+	case 3:
+		return &xy_data->tch4;
+	default:
+		return NULL;
+	}
+}
+
+static void cyttsp_report_tchdata(struct cyttsp *ts)
+{
+	struct cyttsp_xydata *xy_data = &ts->xy_data;
+	struct input_dev *input = ts->input;
+	int num_tch = GET_NUM_TOUCHES(xy_data->tt_stat);
+	const struct cyttsp_tch *tch;
+	int ids[CY_MAX_ID];
+	int i;
+	DECLARE_BITMAP(used, CY_MAX_ID);
+
+	if (IS_LARGE_AREA(xy_data->tt_stat) == 1) {
+		/* terminate all active tracks */
+		num_tch = 0;
+		dev_dbg(ts->dev, "%s: Large area detected\n", __func__);
+	} else if (num_tch > CY_MAX_FINGER) {
+		/* terminate all active tracks */
+		num_tch = 0;
+		dev_dbg(ts->dev, "%s: Num touch error detected\n", __func__);
+	} else if (IS_BAD_PKT(xy_data->tt_mode)) {
+		/* terminate all active tracks */
+		num_tch = 0;
+		dev_dbg(ts->dev, "%s: Invalid buffer detected\n", __func__);
+	}
+
+	cyttsp_extract_track_ids(xy_data, ids);
+
+	bitmap_zero(used, CY_MAX_ID);
+
+	for (i = 0; i < num_tch; i++) {
+		tch = cyttsp_get_tch(xy_data, i);
+
+		input_mt_slot(input, ids[i]);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
+		input_report_abs(input, ABS_MT_POSITION_X, be16_to_cpu(tch->x));
+		input_report_abs(input, ABS_MT_POSITION_Y, be16_to_cpu(tch->y));
+		input_report_abs(input, ABS_MT_TOUCH_MAJOR, tch->z);
+
+		__set_bit(ids[i], used);
+	}
+
+	for (i = 0; i < CY_MAX_ID; i++) {
+		if (test_bit(i, used))
+			continue;
+
+		input_mt_slot(input, i);
+		input_mt_report_slot_inactive(input);
+	}
+
+	input_sync(input);
+}
+
+static irqreturn_t cyttsp_irq(int irq, void *handle)
+{
+	struct cyttsp *ts = handle;
+	int error;
+
+	if (unlikely(ts->state == CY_BL_STATE)) {
+		complete(&ts->bl_ready);
+		goto out;
+	}
+
+	/* Get touch data from CYTTSP device */
+	error = ttsp_read_block_data(ts, CY_REG_BASE,
+				 sizeof(struct cyttsp_xydata), &ts->xy_data);
+	if (error)
+		goto out;
+
+	/* provide flow control handshake */
+	error = cyttsp_handshake(ts);
+	if (error)
+		goto out;
+
+	if (unlikely(ts->state == CY_IDLE_STATE))
+		goto out;
+
+	if (GET_BOOTLOADERMODE(ts->xy_data.tt_mode)) {
+		/*
+		 * TTSP device has reset back to bootloader mode.
+		 * Restore to operational mode.
+		 */
+		error = cyttsp_exit_bl_mode(ts);
+		if (error) {
+			dev_err(ts->dev,
+				"Could not return to operational mode, err: %d\n",
+				error);
+			ts->state = CY_IDLE_STATE;
+		}
+	} else {
+		cyttsp_report_tchdata(ts);
+	}
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int cyttsp_power_on(struct cyttsp *ts)
+{
+	int error;
+
+	error = cyttsp_soft_reset(ts);
+	if (error)
+		return error;
+
+	error = cyttsp_load_bl_regs(ts);
+	if (error)
+		return error;
+
+	if (GET_BOOTLOADERMODE(ts->bl_data.bl_status) &&
+	    IS_VALID_APP(ts->bl_data.bl_status)) {
+		error = cyttsp_exit_bl_mode(ts);
+		if (error) {
+			dev_err(ts->dev, "failed to exit bootloader mode\n");
+			return error;
+		}
+	}
+
+	if (GET_HSTMODE(ts->bl_data.bl_file) != CY_OPERATE_MODE ||
+	    IS_OPERATIONAL_ERR(ts->bl_data.bl_status)) {
+		return -ENODEV;
+	}
+
+	error = cyttsp_set_sysinfo_mode(ts);
+	if (error)
+		return error;
+
+	error = cyttsp_set_sysinfo_regs(ts);
+	if (error)
+		return error;
+
+	error = cyttsp_set_operational_mode(ts);
+	if (error)
+		return error;
+
+	/* init active distance */
+	error = cyttsp_act_dist_setup(ts);
+	if (error)
+		return error;
+
+	ts->state = CY_ACTIVE_STATE;
+
+	return 0;
+}
+
+static int cyttsp_enable(struct cyttsp *ts)
+{
+	int error;
+
+	/*
+	 * The device firmware can wake on an I2C or SPI memory slave
+	 * address match. So just reading a register is sufficient to
+	 * wake up the device. The first read attempt will fail but it
+	 * will wake it up making the second read attempt successful.
+	 */
+	error = ttsp_read_block_data(ts, CY_REG_BASE,
+				     sizeof(ts->xy_data), &ts->xy_data);
+	if (error)
+		return error;
+
+	if (GET_HSTMODE(ts->xy_data.hst_mode))
+		return -EIO;
+
+	enable_irq(ts->irq);
+
+	return 0;
+}
+
+static int cyttsp_disable(struct cyttsp *ts)
+{
+	int error;
+
+	error = ttsp_send_command(ts, CY_LOW_POWER_MODE);
+	if (error)
+		return error;
+
+	disable_irq(ts->irq);
+
+	return 0;
+}
+
+static int __maybe_unused cyttsp_suspend(struct device *dev)
+{
+	struct cyttsp *ts = dev_get_drvdata(dev);
+	int retval = 0;
+
+	mutex_lock(&ts->input->mutex);
+
+	if (input_device_enabled(ts->input)) {
+		retval = cyttsp_disable(ts);
+		if (retval == 0)
+			ts->suspended = true;
+	}
+
+	mutex_unlock(&ts->input->mutex);
+
+	return retval;
+}
+
+static int __maybe_unused cyttsp_resume(struct device *dev)
+{
+	struct cyttsp *ts = dev_get_drvdata(dev);
+
+	mutex_lock(&ts->input->mutex);
+
+	if (input_device_enabled(ts->input))
+		cyttsp_enable(ts);
+
+	ts->suspended = false;
+
+	mutex_unlock(&ts->input->mutex);
+
+	return 0;
+}
+
+SIMPLE_DEV_PM_OPS(cyttsp_pm_ops, cyttsp_suspend, cyttsp_resume);
+EXPORT_SYMBOL_GPL(cyttsp_pm_ops);
+
+static int cyttsp_open(struct input_dev *dev)
+{
+	struct cyttsp *ts = input_get_drvdata(dev);
+	int retval = 0;
+
+	if (!ts->suspended)
+		retval = cyttsp_enable(ts);
+
+	return retval;
+}
+
+static void cyttsp_close(struct input_dev *dev)
+{
+	struct cyttsp *ts = input_get_drvdata(dev);
+
+	if (!ts->suspended)
+		cyttsp_disable(ts);
+}
+
+static int cyttsp_parse_properties(struct cyttsp *ts)
+{
+	struct device *dev = ts->dev;
+	u32 dt_value;
+	int ret;
+
+	ts->bl_keys = devm_kzalloc(dev, CY_NUM_BL_KEYS, GFP_KERNEL);
+	if (!ts->bl_keys)
+		return -ENOMEM;
+
+	/* Set some default values */
+	ts->use_hndshk = false;
+	ts->act_dist = CY_ACT_DIST_DFLT;
+	ts->act_intrvl = CY_ACT_INTRVL_DFLT;
+	ts->tch_tmout = CY_TCH_TMOUT_DFLT;
+	ts->lp_intrvl = CY_LP_INTRVL_DFLT;
+
+	ret = device_property_read_u8_array(dev, "bootloader-key",
+					    ts->bl_keys, CY_NUM_BL_KEYS);
+	if (ret) {
+		dev_err(dev,
+			"bootloader-key property could not be retrieved\n");
+		return ret;
+	}
+
+	ts->use_hndshk = device_property_present(dev, "use-handshake");
+
+	if (!device_property_read_u32(dev, "active-distance", &dt_value)) {
+		if (dt_value > 15) {
+			dev_err(dev, "active-distance (%u) must be [0-15]\n",
+				dt_value);
+			return -EINVAL;
+		}
+		ts->act_dist &= ~CY_ACT_DIST_MASK;
+		ts->act_dist |= dt_value;
+	}
+
+	if (!device_property_read_u32(dev, "active-interval-ms", &dt_value)) {
+		if (dt_value > 255) {
+			dev_err(dev, "active-interval-ms (%u) must be [0-255]\n",
+				dt_value);
+			return -EINVAL;
+		}
+		ts->act_intrvl = dt_value;
+	}
+
+	if (!device_property_read_u32(dev, "lowpower-interval-ms", &dt_value)) {
+		if (dt_value > 2550) {
+			dev_err(dev, "lowpower-interval-ms (%u) must be [0-2550]\n",
+				dt_value);
+			return -EINVAL;
+		}
+		/* Register value is expressed in 0.01s / bit */
+		ts->lp_intrvl = dt_value / 10;
+	}
+
+	if (!device_property_read_u32(dev, "touch-timeout-ms", &dt_value)) {
+		if (dt_value > 2550) {
+			dev_err(dev, "touch-timeout-ms (%u) must be [0-2550]\n",
+				dt_value);
+			return -EINVAL;
+		}
+		/* Register value is expressed in 0.01s / bit */
+		ts->tch_tmout = dt_value / 10;
+	}
+
+	return 0;
+}
+
+static void cyttsp_disable_regulators(void *_ts)
+{
+	struct cyttsp *ts = _ts;
+
+	regulator_bulk_disable(ARRAY_SIZE(ts->regulators),
+			       ts->regulators);
+}
+
+struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops,
+			    struct device *dev, int irq, size_t xfer_buf_size)
+{
+	struct cyttsp *ts;
+	struct input_dev *input_dev;
+	int error;
+
+	ts = devm_kzalloc(dev, sizeof(*ts) + xfer_buf_size, GFP_KERNEL);
+	if (!ts)
+		return ERR_PTR(-ENOMEM);
+
+	input_dev = devm_input_allocate_device(dev);
+	if (!input_dev)
+		return ERR_PTR(-ENOMEM);
+
+	ts->dev = dev;
+	ts->input = input_dev;
+	ts->bus_ops = bus_ops;
+	ts->irq = irq;
+
+	/*
+	 * VCPIN is the analog voltage supply
+	 * VDD is the digital voltage supply
+	 */
+	ts->regulators[0].supply = "vcpin";
+	ts->regulators[1].supply = "vdd";
+	error = devm_regulator_bulk_get(dev, ARRAY_SIZE(ts->regulators),
+					ts->regulators);
+	if (error) {
+		dev_err(dev, "Failed to get regulators: %d\n", error);
+		return ERR_PTR(error);
+	}
+
+	error = regulator_bulk_enable(ARRAY_SIZE(ts->regulators),
+				      ts->regulators);
+	if (error) {
+		dev_err(dev, "Cannot enable regulators: %d\n", error);
+		return ERR_PTR(error);
+	}
+
+	error = devm_add_action_or_reset(dev, cyttsp_disable_regulators, ts);
+	if (error) {
+		dev_err(dev, "failed to install chip disable handler\n");
+		return ERR_PTR(error);
+	}
+
+	ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ts->reset_gpio)) {
+		error = PTR_ERR(ts->reset_gpio);
+		dev_err(dev, "Failed to request reset gpio, error %d\n", error);
+		return ERR_PTR(error);
+	}
+
+	error = cyttsp_parse_properties(ts);
+	if (error)
+		return ERR_PTR(error);
+
+	init_completion(&ts->bl_ready);
+
+	input_dev->name = "Cypress TTSP TouchScreen";
+	input_dev->id.bustype = bus_ops->bustype;
+	input_dev->dev.parent = ts->dev;
+
+	input_dev->open = cyttsp_open;
+	input_dev->close = cyttsp_close;
+
+	input_set_drvdata(input_dev, ts);
+
+	input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X);
+	input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y);
+	/* One byte for width 0..255 so this is the limit */
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+
+	touchscreen_parse_properties(input_dev, true, NULL);
+
+	error = input_mt_init_slots(input_dev, CY_MAX_ID, INPUT_MT_DIRECT);
+	if (error) {
+		dev_err(dev, "Unable to init MT slots.\n");
+		return ERR_PTR(error);
+	}
+
+	error = devm_request_threaded_irq(dev, ts->irq, NULL, cyttsp_irq,
+					  IRQF_ONESHOT | IRQF_NO_AUTOEN,
+					  "cyttsp", ts);
+	if (error) {
+		dev_err(ts->dev, "failed to request IRQ %d, err: %d\n",
+			ts->irq, error);
+		return ERR_PTR(error);
+	}
+
+	cyttsp_hard_reset(ts);
+
+	error = cyttsp_power_on(ts);
+	if (error)
+		return ERR_PTR(error);
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(ts->dev, "failed to register input device: %d\n",
+			error);
+		return ERR_PTR(error);
+	}
+
+	return ts;
+}
+EXPORT_SYMBOL_GPL(cyttsp_probe);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard touchscreen driver core");
+MODULE_AUTHOR("Cypress");