Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1515 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
new file mode 100644
index 000000000..ddd0f1f62
--- /dev/null
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -0,0 +1,1515 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Simon Budig, <simon.budig@kernelconcepts.de>
+ * Daniel Wagener <daniel.wagener@kernelconcepts.de> (M09 firmware support)
+ * Lothar Waßmann <LW@KARO-electronics.de> (DT support)
+ */
+
+/*
+ * This is a driver for the EDT "Polytouch" family of touch controllers
+ * based on the FocalTech FT5x06 line of chips.
+ *
+ * Development of this driver has been sponsored by Glyn:
+ *    http://www.glyn.com/Products/Displays
+ */
+
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/ratelimit.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+#include <asm/unaligned.h>
+
+#define WORK_REGISTER_THRESHOLD		0x00
+#define WORK_REGISTER_REPORT_RATE	0x08
+#define WORK_REGISTER_GAIN		0x30
+#define WORK_REGISTER_OFFSET		0x31
+#define WORK_REGISTER_NUM_X		0x33
+#define WORK_REGISTER_NUM_Y		0x34
+
+#define PMOD_REGISTER_ACTIVE		0x00
+#define PMOD_REGISTER_HIBERNATE		0x03
+
+#define M09_REGISTER_THRESHOLD		0x80
+#define M09_REGISTER_GAIN		0x92
+#define M09_REGISTER_OFFSET		0x93
+#define M09_REGISTER_NUM_X		0x94
+#define M09_REGISTER_NUM_Y		0x95
+
+#define M12_REGISTER_REPORT_RATE	0x88
+
+#define EV_REGISTER_THRESHOLD		0x40
+#define EV_REGISTER_GAIN		0x41
+#define EV_REGISTER_OFFSET_Y		0x45
+#define EV_REGISTER_OFFSET_X		0x46
+
+#define NO_REGISTER			0xff
+
+#define WORK_REGISTER_OPMODE		0x3c
+#define FACTORY_REGISTER_OPMODE		0x01
+#define PMOD_REGISTER_OPMODE		0xa5
+
+#define TOUCH_EVENT_DOWN		0x00
+#define TOUCH_EVENT_UP			0x01
+#define TOUCH_EVENT_ON			0x02
+#define TOUCH_EVENT_RESERVED		0x03
+
+#define EDT_NAME_LEN			23
+#define EDT_SWITCH_MODE_RETRIES		10
+#define EDT_SWITCH_MODE_DELAY		5 /* msec */
+#define EDT_RAW_DATA_RETRIES		100
+#define EDT_RAW_DATA_DELAY		1000 /* usec */
+
+#define EDT_DEFAULT_NUM_X		1024
+#define EDT_DEFAULT_NUM_Y		1024
+
+enum edt_pmode {
+	EDT_PMODE_NOT_SUPPORTED,
+	EDT_PMODE_HIBERNATE,
+	EDT_PMODE_POWEROFF,
+};
+
+enum edt_ver {
+	EDT_M06,
+	EDT_M09,
+	EDT_M12,
+	EV_FT,
+	GENERIC_FT,
+};
+
+struct edt_reg_addr {
+	int reg_threshold;
+	int reg_report_rate;
+	int reg_gain;
+	int reg_offset;
+	int reg_offset_x;
+	int reg_offset_y;
+	int reg_num_x;
+	int reg_num_y;
+};
+
+struct edt_ft5x06_ts_data {
+	struct i2c_client *client;
+	struct input_dev *input;
+	struct touchscreen_properties prop;
+	u16 num_x;
+	u16 num_y;
+	struct regulator *vcc;
+	struct regulator *iovcc;
+
+	struct gpio_desc *reset_gpio;
+	struct gpio_desc *wake_gpio;
+
+#if defined(CONFIG_DEBUG_FS)
+	struct dentry *debug_dir;
+	u8 *raw_buffer;
+	size_t raw_bufsize;
+#endif
+
+	struct mutex mutex;
+	bool factory_mode;
+	enum edt_pmode suspend_mode;
+	int threshold;
+	int gain;
+	int offset;
+	int offset_x;
+	int offset_y;
+	int report_rate;
+	int max_support_points;
+
+	char name[EDT_NAME_LEN];
+	char fw_version[EDT_NAME_LEN];
+
+	struct edt_reg_addr reg_addr;
+	enum edt_ver version;
+	unsigned int crc_errors;
+	unsigned int header_errors;
+};
+
+struct edt_i2c_chip_data {
+	int  max_support_points;
+};
+
+static int edt_ft5x06_ts_readwrite(struct i2c_client *client,
+				   u16 wr_len, u8 *wr_buf,
+				   u16 rd_len, u8 *rd_buf)
+{
+	struct i2c_msg wrmsg[2];
+	int i = 0;
+	int ret;
+
+	if (wr_len) {
+		wrmsg[i].addr  = client->addr;
+		wrmsg[i].flags = 0;
+		wrmsg[i].len = wr_len;
+		wrmsg[i].buf = wr_buf;
+		i++;
+	}
+	if (rd_len) {
+		wrmsg[i].addr  = client->addr;
+		wrmsg[i].flags = I2C_M_RD;
+		wrmsg[i].len = rd_len;
+		wrmsg[i].buf = rd_buf;
+		i++;
+	}
+
+	ret = i2c_transfer(client->adapter, wrmsg, i);
+	if (ret < 0)
+		return ret;
+	if (ret != i)
+		return -EIO;
+
+	return 0;
+}
+
+static bool edt_ft5x06_ts_check_crc(struct edt_ft5x06_ts_data *tsdata,
+				    u8 *buf, int buflen)
+{
+	int i;
+	u8 crc = 0;
+
+	for (i = 0; i < buflen - 1; i++)
+		crc ^= buf[i];
+
+	if (crc != buf[buflen-1]) {
+		tsdata->crc_errors++;
+		dev_err_ratelimited(&tsdata->client->dev,
+				    "crc error: 0x%02x expected, got 0x%02x\n",
+				    crc, buf[buflen-1]);
+		return false;
+	}
+
+	return true;
+}
+
+static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
+{
+	struct edt_ft5x06_ts_data *tsdata = dev_id;
+	struct device *dev = &tsdata->client->dev;
+	u8 cmd;
+	u8 rdbuf[63];
+	int i, type, x, y, id;
+	int offset, tplen, datalen, crclen;
+	int error;
+
+	switch (tsdata->version) {
+	case EDT_M06:
+		cmd = 0xf9; /* tell the controller to send touch data */
+		offset = 5; /* where the actual touch data starts */
+		tplen = 4;  /* data comes in so called frames */
+		crclen = 1; /* length of the crc data */
+		break;
+
+	case EDT_M09:
+	case EDT_M12:
+	case EV_FT:
+	case GENERIC_FT:
+		cmd = 0x0;
+		offset = 3;
+		tplen = 6;
+		crclen = 0;
+		break;
+
+	default:
+		goto out;
+	}
+
+	memset(rdbuf, 0, sizeof(rdbuf));
+	datalen = tplen * tsdata->max_support_points + offset + crclen;
+
+	error = edt_ft5x06_ts_readwrite(tsdata->client,
+					sizeof(cmd), &cmd,
+					datalen, rdbuf);
+	if (error) {
+		dev_err_ratelimited(dev, "Unable to fetch data, error: %d\n",
+				    error);
+		goto out;
+	}
+
+	/* M09/M12 does not send header or CRC */
+	if (tsdata->version == EDT_M06) {
+		if (rdbuf[0] != 0xaa || rdbuf[1] != 0xaa ||
+			rdbuf[2] != datalen) {
+			tsdata->header_errors++;
+			dev_err_ratelimited(dev,
+					"Unexpected header: %02x%02x%02x!\n",
+					rdbuf[0], rdbuf[1], rdbuf[2]);
+			goto out;
+		}
+
+		if (!edt_ft5x06_ts_check_crc(tsdata, rdbuf, datalen))
+			goto out;
+	}
+
+	for (i = 0; i < tsdata->max_support_points; i++) {
+		u8 *buf = &rdbuf[i * tplen + offset];
+
+		type = buf[0] >> 6;
+		/* ignore Reserved events */
+		if (type == TOUCH_EVENT_RESERVED)
+			continue;
+
+		/* M06 sometimes sends bogus coordinates in TOUCH_DOWN */
+		if (tsdata->version == EDT_M06 && type == TOUCH_EVENT_DOWN)
+			continue;
+
+		x = get_unaligned_be16(buf) & 0x0fff;
+		y = get_unaligned_be16(buf + 2) & 0x0fff;
+		/* The FT5x26 send the y coordinate first */
+		if (tsdata->version == EV_FT)
+			swap(x, y);
+
+		id = (buf[2] >> 4) & 0x0f;
+
+		input_mt_slot(tsdata->input, id);
+		if (input_mt_report_slot_state(tsdata->input, MT_TOOL_FINGER,
+					       type != TOUCH_EVENT_UP))
+			touchscreen_report_pos(tsdata->input, &tsdata->prop,
+					       x, y, true);
+	}
+
+	input_mt_report_pointer_emulation(tsdata->input, true);
+	input_sync(tsdata->input);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int edt_ft5x06_register_write(struct edt_ft5x06_ts_data *tsdata,
+				     u8 addr, u8 value)
+{
+	u8 wrbuf[4];
+
+	switch (tsdata->version) {
+	case EDT_M06:
+		wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc;
+		wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f;
+		wrbuf[2] = value;
+		wrbuf[3] = wrbuf[0] ^ wrbuf[1] ^ wrbuf[2];
+		return edt_ft5x06_ts_readwrite(tsdata->client, 4,
+					wrbuf, 0, NULL);
+
+	case EDT_M09:
+	case EDT_M12:
+	case EV_FT:
+	case GENERIC_FT:
+		wrbuf[0] = addr;
+		wrbuf[1] = value;
+
+		return edt_ft5x06_ts_readwrite(tsdata->client, 2,
+					wrbuf, 0, NULL);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int edt_ft5x06_register_read(struct edt_ft5x06_ts_data *tsdata,
+				    u8 addr)
+{
+	u8 wrbuf[2], rdbuf[2];
+	int error;
+
+	switch (tsdata->version) {
+	case EDT_M06:
+		wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc;
+		wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f;
+		wrbuf[1] |= tsdata->factory_mode ? 0x80 : 0x40;
+
+		error = edt_ft5x06_ts_readwrite(tsdata->client, 2, wrbuf, 2,
+						rdbuf);
+		if (error)
+			return error;
+
+		if ((wrbuf[0] ^ wrbuf[1] ^ rdbuf[0]) != rdbuf[1]) {
+			dev_err(&tsdata->client->dev,
+				"crc error: 0x%02x expected, got 0x%02x\n",
+				wrbuf[0] ^ wrbuf[1] ^ rdbuf[0],
+				rdbuf[1]);
+			return -EIO;
+		}
+		break;
+
+	case EDT_M09:
+	case EDT_M12:
+	case EV_FT:
+	case GENERIC_FT:
+		wrbuf[0] = addr;
+		error = edt_ft5x06_ts_readwrite(tsdata->client, 1,
+						wrbuf, 1, rdbuf);
+		if (error)
+			return error;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return rdbuf[0];
+}
+
+struct edt_ft5x06_attribute {
+	struct device_attribute dattr;
+	size_t field_offset;
+	u8 limit_low;
+	u8 limit_high;
+	u8 addr_m06;
+	u8 addr_m09;
+	u8 addr_ev;
+};
+
+#define EDT_ATTR(_field, _mode, _addr_m06, _addr_m09, _addr_ev,		\
+		_limit_low, _limit_high)				\
+	struct edt_ft5x06_attribute edt_ft5x06_attr_##_field = {	\
+		.dattr = __ATTR(_field, _mode,				\
+				edt_ft5x06_setting_show,		\
+				edt_ft5x06_setting_store),		\
+		.field_offset = offsetof(struct edt_ft5x06_ts_data, _field), \
+		.addr_m06 = _addr_m06,					\
+		.addr_m09 = _addr_m09,					\
+		.addr_ev  = _addr_ev,					\
+		.limit_low = _limit_low,				\
+		.limit_high = _limit_high,				\
+	}
+
+static ssize_t edt_ft5x06_setting_show(struct device *dev,
+				       struct device_attribute *dattr,
+				       char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
+	struct edt_ft5x06_attribute *attr =
+			container_of(dattr, struct edt_ft5x06_attribute, dattr);
+	u8 *field = (u8 *)tsdata + attr->field_offset;
+	int val;
+	size_t count = 0;
+	int error = 0;
+	u8 addr;
+
+	mutex_lock(&tsdata->mutex);
+
+	if (tsdata->factory_mode) {
+		error = -EIO;
+		goto out;
+	}
+
+	switch (tsdata->version) {
+	case EDT_M06:
+		addr = attr->addr_m06;
+		break;
+
+	case EDT_M09:
+	case EDT_M12:
+	case GENERIC_FT:
+		addr = attr->addr_m09;
+		break;
+
+	case EV_FT:
+		addr = attr->addr_ev;
+		break;
+
+	default:
+		error = -ENODEV;
+		goto out;
+	}
+
+	if (addr != NO_REGISTER) {
+		val = edt_ft5x06_register_read(tsdata, addr);
+		if (val < 0) {
+			error = val;
+			dev_err(&tsdata->client->dev,
+				"Failed to fetch attribute %s, error %d\n",
+				dattr->attr.name, error);
+			goto out;
+		}
+	} else {
+		val = *field;
+	}
+
+	if (val != *field) {
+		dev_warn(&tsdata->client->dev,
+			 "%s: read (%d) and stored value (%d) differ\n",
+			 dattr->attr.name, val, *field);
+		*field = val;
+	}
+
+	count = scnprintf(buf, PAGE_SIZE, "%d\n", val);
+out:
+	mutex_unlock(&tsdata->mutex);
+	return error ?: count;
+}
+
+static ssize_t edt_ft5x06_setting_store(struct device *dev,
+					struct device_attribute *dattr,
+					const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
+	struct edt_ft5x06_attribute *attr =
+			container_of(dattr, struct edt_ft5x06_attribute, dattr);
+	u8 *field = (u8 *)tsdata + attr->field_offset;
+	unsigned int val;
+	int error;
+	u8 addr;
+
+	mutex_lock(&tsdata->mutex);
+
+	if (tsdata->factory_mode) {
+		error = -EIO;
+		goto out;
+	}
+
+	error = kstrtouint(buf, 0, &val);
+	if (error)
+		goto out;
+
+	if (val < attr->limit_low || val > attr->limit_high) {
+		error = -ERANGE;
+		goto out;
+	}
+
+	switch (tsdata->version) {
+	case EDT_M06:
+		addr = attr->addr_m06;
+		break;
+
+	case EDT_M09:
+	case EDT_M12:
+	case GENERIC_FT:
+		addr = attr->addr_m09;
+		break;
+
+	case EV_FT:
+		addr = attr->addr_ev;
+		break;
+
+	default:
+		error = -ENODEV;
+		goto out;
+	}
+
+	if (addr != NO_REGISTER) {
+		error = edt_ft5x06_register_write(tsdata, addr, val);
+		if (error) {
+			dev_err(&tsdata->client->dev,
+				"Failed to update attribute %s, error: %d\n",
+				dattr->attr.name, error);
+			goto out;
+		}
+	}
+	*field = val;
+
+out:
+	mutex_unlock(&tsdata->mutex);
+	return error ?: count;
+}
+
+/* m06, m09: range 0-31, m12: range 0-5 */
+static EDT_ATTR(gain, S_IWUSR | S_IRUGO, WORK_REGISTER_GAIN,
+		M09_REGISTER_GAIN, EV_REGISTER_GAIN, 0, 31);
+/* m06, m09: range 0-31, m12: range 0-16 */
+static EDT_ATTR(offset, S_IWUSR | S_IRUGO, WORK_REGISTER_OFFSET,
+		M09_REGISTER_OFFSET, NO_REGISTER, 0, 31);
+/* m06, m09, m12: no supported, ev_ft: range 0-80 */
+static EDT_ATTR(offset_x, S_IWUSR | S_IRUGO, NO_REGISTER, NO_REGISTER,
+		EV_REGISTER_OFFSET_X, 0, 80);
+/* m06, m09, m12: no supported, ev_ft: range 0-80 */
+static EDT_ATTR(offset_y, S_IWUSR | S_IRUGO, NO_REGISTER, NO_REGISTER,
+		EV_REGISTER_OFFSET_Y, 0, 80);
+/* m06: range 20 to 80, m09: range 0 to 30, m12: range 1 to 255... */
+static EDT_ATTR(threshold, S_IWUSR | S_IRUGO, WORK_REGISTER_THRESHOLD,
+		M09_REGISTER_THRESHOLD, EV_REGISTER_THRESHOLD, 0, 255);
+/* m06: range 3 to 14, m12: range 1 to 255 */
+static EDT_ATTR(report_rate, S_IWUSR | S_IRUGO, WORK_REGISTER_REPORT_RATE,
+		M12_REGISTER_REPORT_RATE, NO_REGISTER, 0, 255);
+
+static ssize_t model_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
+
+	return sysfs_emit(buf, "%s\n", tsdata->name);
+}
+
+static DEVICE_ATTR_RO(model);
+
+static ssize_t fw_version_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
+
+	return sysfs_emit(buf, "%s\n", tsdata->fw_version);
+}
+
+static DEVICE_ATTR_RO(fw_version);
+
+/* m06 only */
+static ssize_t header_errors_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
+
+	return sysfs_emit(buf, "%d\n", tsdata->header_errors);
+}
+
+static DEVICE_ATTR_RO(header_errors);
+
+/* m06 only */
+static ssize_t crc_errors_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
+
+	return sysfs_emit(buf, "%d\n", tsdata->crc_errors);
+}
+
+static DEVICE_ATTR_RO(crc_errors);
+
+static struct attribute *edt_ft5x06_attrs[] = {
+	&edt_ft5x06_attr_gain.dattr.attr,
+	&edt_ft5x06_attr_offset.dattr.attr,
+	&edt_ft5x06_attr_offset_x.dattr.attr,
+	&edt_ft5x06_attr_offset_y.dattr.attr,
+	&edt_ft5x06_attr_threshold.dattr.attr,
+	&edt_ft5x06_attr_report_rate.dattr.attr,
+	&dev_attr_model.attr,
+	&dev_attr_fw_version.attr,
+	&dev_attr_header_errors.attr,
+	&dev_attr_crc_errors.attr,
+	NULL
+};
+
+static const struct attribute_group edt_ft5x06_attr_group = {
+	.attrs = edt_ft5x06_attrs,
+};
+
+static void edt_ft5x06_restore_reg_parameters(struct edt_ft5x06_ts_data *tsdata)
+{
+	struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
+
+	edt_ft5x06_register_write(tsdata, reg_addr->reg_threshold,
+				  tsdata->threshold);
+	edt_ft5x06_register_write(tsdata, reg_addr->reg_gain,
+				  tsdata->gain);
+	if (reg_addr->reg_offset != NO_REGISTER)
+		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset,
+					  tsdata->offset);
+	if (reg_addr->reg_offset_x != NO_REGISTER)
+		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_x,
+					  tsdata->offset_x);
+	if (reg_addr->reg_offset_y != NO_REGISTER)
+		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_y,
+					  tsdata->offset_y);
+	if (reg_addr->reg_report_rate != NO_REGISTER)
+		edt_ft5x06_register_write(tsdata, reg_addr->reg_report_rate,
+				  tsdata->report_rate);
+
+}
+
+#ifdef CONFIG_DEBUG_FS
+static int edt_ft5x06_factory_mode(struct edt_ft5x06_ts_data *tsdata)
+{
+	struct i2c_client *client = tsdata->client;
+	int retries = EDT_SWITCH_MODE_RETRIES;
+	int ret;
+	int error;
+
+	if (tsdata->version != EDT_M06) {
+		dev_err(&client->dev,
+			"No factory mode support for non-M06 devices\n");
+		return -EINVAL;
+	}
+
+	disable_irq(client->irq);
+
+	if (!tsdata->raw_buffer) {
+		tsdata->raw_bufsize = tsdata->num_x * tsdata->num_y *
+				      sizeof(u16);
+		tsdata->raw_buffer = kzalloc(tsdata->raw_bufsize, GFP_KERNEL);
+		if (!tsdata->raw_buffer) {
+			error = -ENOMEM;
+			goto err_out;
+		}
+	}
+
+	/* mode register is 0x3c when in the work mode */
+	error = edt_ft5x06_register_write(tsdata, WORK_REGISTER_OPMODE, 0x03);
+	if (error) {
+		dev_err(&client->dev,
+			"failed to switch to factory mode, error %d\n", error);
+		goto err_out;
+	}
+
+	tsdata->factory_mode = true;
+	do {
+		mdelay(EDT_SWITCH_MODE_DELAY);
+		/* mode register is 0x01 when in factory mode */
+		ret = edt_ft5x06_register_read(tsdata, FACTORY_REGISTER_OPMODE);
+		if (ret == 0x03)
+			break;
+	} while (--retries > 0);
+
+	if (retries == 0) {
+		dev_err(&client->dev, "not in factory mode after %dms.\n",
+			EDT_SWITCH_MODE_RETRIES * EDT_SWITCH_MODE_DELAY);
+		error = -EIO;
+		goto err_out;
+	}
+
+	return 0;
+
+err_out:
+	kfree(tsdata->raw_buffer);
+	tsdata->raw_buffer = NULL;
+	tsdata->factory_mode = false;
+	enable_irq(client->irq);
+
+	return error;
+}
+
+static int edt_ft5x06_work_mode(struct edt_ft5x06_ts_data *tsdata)
+{
+	struct i2c_client *client = tsdata->client;
+	int retries = EDT_SWITCH_MODE_RETRIES;
+	int ret;
+	int error;
+
+	/* mode register is 0x01 when in the factory mode */
+	error = edt_ft5x06_register_write(tsdata, FACTORY_REGISTER_OPMODE, 0x1);
+	if (error) {
+		dev_err(&client->dev,
+			"failed to switch to work mode, error: %d\n", error);
+		return error;
+	}
+
+	tsdata->factory_mode = false;
+
+	do {
+		mdelay(EDT_SWITCH_MODE_DELAY);
+		/* mode register is 0x01 when in factory mode */
+		ret = edt_ft5x06_register_read(tsdata, WORK_REGISTER_OPMODE);
+		if (ret == 0x01)
+			break;
+	} while (--retries > 0);
+
+	if (retries == 0) {
+		dev_err(&client->dev, "not in work mode after %dms.\n",
+			EDT_SWITCH_MODE_RETRIES * EDT_SWITCH_MODE_DELAY);
+		tsdata->factory_mode = true;
+		return -EIO;
+	}
+
+	kfree(tsdata->raw_buffer);
+	tsdata->raw_buffer = NULL;
+
+	edt_ft5x06_restore_reg_parameters(tsdata);
+	enable_irq(client->irq);
+
+	return 0;
+}
+
+static int edt_ft5x06_debugfs_mode_get(void *data, u64 *mode)
+{
+	struct edt_ft5x06_ts_data *tsdata = data;
+
+	*mode = tsdata->factory_mode;
+
+	return 0;
+};
+
+static int edt_ft5x06_debugfs_mode_set(void *data, u64 mode)
+{
+	struct edt_ft5x06_ts_data *tsdata = data;
+	int retval = 0;
+
+	if (mode > 1)
+		return -ERANGE;
+
+	mutex_lock(&tsdata->mutex);
+
+	if (mode != tsdata->factory_mode) {
+		retval = mode ? edt_ft5x06_factory_mode(tsdata) :
+				edt_ft5x06_work_mode(tsdata);
+	}
+
+	mutex_unlock(&tsdata->mutex);
+
+	return retval;
+};
+
+DEFINE_SIMPLE_ATTRIBUTE(debugfs_mode_fops, edt_ft5x06_debugfs_mode_get,
+			edt_ft5x06_debugfs_mode_set, "%llu\n");
+
+static ssize_t edt_ft5x06_debugfs_raw_data_read(struct file *file,
+				char __user *buf, size_t count, loff_t *off)
+{
+	struct edt_ft5x06_ts_data *tsdata = file->private_data;
+	struct i2c_client *client = tsdata->client;
+	int retries  = EDT_RAW_DATA_RETRIES;
+	int val, i, error;
+	size_t read = 0;
+	int colbytes;
+	char wrbuf[3];
+	u8 *rdbuf;
+
+	if (*off < 0 || *off >= tsdata->raw_bufsize)
+		return 0;
+
+	mutex_lock(&tsdata->mutex);
+
+	if (!tsdata->factory_mode || !tsdata->raw_buffer) {
+		error = -EIO;
+		goto out;
+	}
+
+	error = edt_ft5x06_register_write(tsdata, 0x08, 0x01);
+	if (error) {
+		dev_dbg(&client->dev,
+			"failed to write 0x08 register, error %d\n", error);
+		goto out;
+	}
+
+	do {
+		usleep_range(EDT_RAW_DATA_DELAY, EDT_RAW_DATA_DELAY + 100);
+		val = edt_ft5x06_register_read(tsdata, 0x08);
+		if (val < 1)
+			break;
+	} while (--retries > 0);
+
+	if (val < 0) {
+		error = val;
+		dev_dbg(&client->dev,
+			"failed to read 0x08 register, error %d\n", error);
+		goto out;
+	}
+
+	if (retries == 0) {
+		dev_dbg(&client->dev,
+			"timed out waiting for register to settle\n");
+		error = -ETIMEDOUT;
+		goto out;
+	}
+
+	rdbuf = tsdata->raw_buffer;
+	colbytes = tsdata->num_y * sizeof(u16);
+
+	wrbuf[0] = 0xf5;
+	wrbuf[1] = 0x0e;
+	for (i = 0; i < tsdata->num_x; i++) {
+		wrbuf[2] = i;  /* column index */
+		error = edt_ft5x06_ts_readwrite(tsdata->client,
+						sizeof(wrbuf), wrbuf,
+						colbytes, rdbuf);
+		if (error)
+			goto out;
+
+		rdbuf += colbytes;
+	}
+
+	read = min_t(size_t, count, tsdata->raw_bufsize - *off);
+	if (copy_to_user(buf, tsdata->raw_buffer + *off, read)) {
+		error = -EFAULT;
+		goto out;
+	}
+
+	*off += read;
+out:
+	mutex_unlock(&tsdata->mutex);
+	return error ?: read;
+};
+
+static const struct file_operations debugfs_raw_data_fops = {
+	.open = simple_open,
+	.read = edt_ft5x06_debugfs_raw_data_read,
+};
+
+static void edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata,
+					  const char *debugfs_name)
+{
+	tsdata->debug_dir = debugfs_create_dir(debugfs_name, NULL);
+
+	debugfs_create_u16("num_x", S_IRUSR, tsdata->debug_dir, &tsdata->num_x);
+	debugfs_create_u16("num_y", S_IRUSR, tsdata->debug_dir, &tsdata->num_y);
+
+	debugfs_create_file("mode", S_IRUSR | S_IWUSR,
+			    tsdata->debug_dir, tsdata, &debugfs_mode_fops);
+	debugfs_create_file("raw_data", S_IRUSR,
+			    tsdata->debug_dir, tsdata, &debugfs_raw_data_fops);
+}
+
+static void edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
+{
+	debugfs_remove_recursive(tsdata->debug_dir);
+	kfree(tsdata->raw_buffer);
+}
+
+#else
+
+static int edt_ft5x06_factory_mode(struct edt_ft5x06_ts_data *tsdata)
+{
+	return -ENOSYS;
+}
+
+static void edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata,
+					  const char *debugfs_name)
+{
+}
+
+static void edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
+{
+}
+
+#endif /* CONFIG_DEBUGFS */
+
+static int edt_ft5x06_ts_identify(struct i2c_client *client,
+				  struct edt_ft5x06_ts_data *tsdata)
+{
+	u8 rdbuf[EDT_NAME_LEN];
+	char *p;
+	int error;
+	char *model_name = tsdata->name;
+	char *fw_version = tsdata->fw_version;
+
+	/* see what we find if we assume it is a M06 *
+	 * if we get less than EDT_NAME_LEN, we don't want
+	 * to have garbage in there
+	 */
+	memset(rdbuf, 0, sizeof(rdbuf));
+	error = edt_ft5x06_ts_readwrite(client, 1, "\xBB",
+					EDT_NAME_LEN - 1, rdbuf);
+	if (error)
+		return error;
+
+	/* Probe content for something consistent.
+	 * M06 starts with a response byte, M12 gives the data directly.
+	 * M09/Generic does not provide model number information.
+	 */
+	if (!strncasecmp(rdbuf + 1, "EP0", 3)) {
+		tsdata->version = EDT_M06;
+
+		/* remove last '$' end marker */
+		rdbuf[EDT_NAME_LEN - 1] = '\0';
+		if (rdbuf[EDT_NAME_LEN - 2] == '$')
+			rdbuf[EDT_NAME_LEN - 2] = '\0';
+
+		/* look for Model/Version separator */
+		p = strchr(rdbuf, '*');
+		if (p)
+			*p++ = '\0';
+		strscpy(model_name, rdbuf + 1, EDT_NAME_LEN);
+		strscpy(fw_version, p ? p : "", EDT_NAME_LEN);
+	} else if (!strncasecmp(rdbuf, "EP0", 3)) {
+		tsdata->version = EDT_M12;
+
+		/* remove last '$' end marker */
+		rdbuf[EDT_NAME_LEN - 2] = '\0';
+		if (rdbuf[EDT_NAME_LEN - 3] == '$')
+			rdbuf[EDT_NAME_LEN - 3] = '\0';
+
+		/* look for Model/Version separator */
+		p = strchr(rdbuf, '*');
+		if (p)
+			*p++ = '\0';
+		strscpy(model_name, rdbuf, EDT_NAME_LEN);
+		strscpy(fw_version, p ? p : "", EDT_NAME_LEN);
+	} else {
+		/* If it is not an EDT M06/M12 touchscreen, then the model
+		 * detection is a bit hairy. The different ft5x06
+		 * firmares around don't reliably implement the
+		 * identification registers. Well, we'll take a shot.
+		 *
+		 * The main difference between generic focaltec based
+		 * touches and EDT M09 is that we know how to retrieve
+		 * the max coordinates for the latter.
+		 */
+		tsdata->version = GENERIC_FT;
+
+		error = edt_ft5x06_ts_readwrite(client, 1, "\xA6",
+						2, rdbuf);
+		if (error)
+			return error;
+
+		strscpy(fw_version, rdbuf, 2);
+
+		error = edt_ft5x06_ts_readwrite(client, 1, "\xA8",
+						1, rdbuf);
+		if (error)
+			return error;
+
+		/* This "model identification" is not exact. Unfortunately
+		 * not all firmwares for the ft5x06 put useful values in
+		 * the identification registers.
+		 */
+		switch (rdbuf[0]) {
+		case 0x11:   /* EDT EP0110M09 */
+		case 0x35:   /* EDT EP0350M09 */
+		case 0x43:   /* EDT EP0430M09 */
+		case 0x50:   /* EDT EP0500M09 */
+		case 0x57:   /* EDT EP0570M09 */
+		case 0x70:   /* EDT EP0700M09 */
+			tsdata->version = EDT_M09;
+			snprintf(model_name, EDT_NAME_LEN, "EP0%i%i0M09",
+				rdbuf[0] >> 4, rdbuf[0] & 0x0F);
+			break;
+		case 0xa1:   /* EDT EP1010ML00 */
+			tsdata->version = EDT_M09;
+			snprintf(model_name, EDT_NAME_LEN, "EP%i%i0ML00",
+				rdbuf[0] >> 4, rdbuf[0] & 0x0F);
+			break;
+		case 0x5a:   /* Solomon Goldentek Display */
+			snprintf(model_name, EDT_NAME_LEN, "GKTW50SCED1R0");
+			break;
+		case 0x59:  /* Evervision Display with FT5xx6 TS */
+			tsdata->version = EV_FT;
+			error = edt_ft5x06_ts_readwrite(client, 1, "\x53",
+							1, rdbuf);
+			if (error)
+				return error;
+			strscpy(fw_version, rdbuf, 1);
+			snprintf(model_name, EDT_NAME_LEN,
+				 "EVERVISION-FT5726NEi");
+			break;
+		default:
+			snprintf(model_name, EDT_NAME_LEN,
+				 "generic ft5x06 (%02x)",
+				 rdbuf[0]);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static void edt_ft5x06_ts_get_defaults(struct device *dev,
+				       struct edt_ft5x06_ts_data *tsdata)
+{
+	struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
+	u32 val;
+	int error;
+
+	error = device_property_read_u32(dev, "threshold", &val);
+	if (!error) {
+		edt_ft5x06_register_write(tsdata, reg_addr->reg_threshold, val);
+		tsdata->threshold = val;
+	}
+
+	error = device_property_read_u32(dev, "gain", &val);
+	if (!error) {
+		edt_ft5x06_register_write(tsdata, reg_addr->reg_gain, val);
+		tsdata->gain = val;
+	}
+
+	error = device_property_read_u32(dev, "offset", &val);
+	if (!error) {
+		if (reg_addr->reg_offset != NO_REGISTER)
+			edt_ft5x06_register_write(tsdata,
+						  reg_addr->reg_offset, val);
+		tsdata->offset = val;
+	}
+
+	error = device_property_read_u32(dev, "offset-x", &val);
+	if (!error) {
+		if (reg_addr->reg_offset_x != NO_REGISTER)
+			edt_ft5x06_register_write(tsdata,
+						  reg_addr->reg_offset_x, val);
+		tsdata->offset_x = val;
+	}
+
+	error = device_property_read_u32(dev, "offset-y", &val);
+	if (!error) {
+		if (reg_addr->reg_offset_y != NO_REGISTER)
+			edt_ft5x06_register_write(tsdata,
+						  reg_addr->reg_offset_y, val);
+		tsdata->offset_y = val;
+	}
+}
+
+static void edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata)
+{
+	struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
+
+	tsdata->threshold = edt_ft5x06_register_read(tsdata,
+						     reg_addr->reg_threshold);
+	tsdata->gain = edt_ft5x06_register_read(tsdata, reg_addr->reg_gain);
+	if (reg_addr->reg_offset != NO_REGISTER)
+		tsdata->offset =
+			edt_ft5x06_register_read(tsdata, reg_addr->reg_offset);
+	if (reg_addr->reg_offset_x != NO_REGISTER)
+		tsdata->offset_x = edt_ft5x06_register_read(tsdata,
+						reg_addr->reg_offset_x);
+	if (reg_addr->reg_offset_y != NO_REGISTER)
+		tsdata->offset_y = edt_ft5x06_register_read(tsdata,
+						reg_addr->reg_offset_y);
+	if (reg_addr->reg_report_rate != NO_REGISTER)
+		tsdata->report_rate = edt_ft5x06_register_read(tsdata,
+						reg_addr->reg_report_rate);
+	tsdata->num_x = EDT_DEFAULT_NUM_X;
+	if (reg_addr->reg_num_x != NO_REGISTER)
+		tsdata->num_x = edt_ft5x06_register_read(tsdata,
+							 reg_addr->reg_num_x);
+	tsdata->num_y = EDT_DEFAULT_NUM_Y;
+	if (reg_addr->reg_num_y != NO_REGISTER)
+		tsdata->num_y = edt_ft5x06_register_read(tsdata,
+							 reg_addr->reg_num_y);
+}
+
+static void edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
+{
+	struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
+
+	switch (tsdata->version) {
+	case EDT_M06:
+		reg_addr->reg_threshold = WORK_REGISTER_THRESHOLD;
+		reg_addr->reg_report_rate = WORK_REGISTER_REPORT_RATE;
+		reg_addr->reg_gain = WORK_REGISTER_GAIN;
+		reg_addr->reg_offset = WORK_REGISTER_OFFSET;
+		reg_addr->reg_offset_x = NO_REGISTER;
+		reg_addr->reg_offset_y = NO_REGISTER;
+		reg_addr->reg_num_x = WORK_REGISTER_NUM_X;
+		reg_addr->reg_num_y = WORK_REGISTER_NUM_Y;
+		break;
+
+	case EDT_M09:
+	case EDT_M12:
+		reg_addr->reg_threshold = M09_REGISTER_THRESHOLD;
+		reg_addr->reg_report_rate = tsdata->version == EDT_M12 ?
+			M12_REGISTER_REPORT_RATE : NO_REGISTER;
+		reg_addr->reg_gain = M09_REGISTER_GAIN;
+		reg_addr->reg_offset = M09_REGISTER_OFFSET;
+		reg_addr->reg_offset_x = NO_REGISTER;
+		reg_addr->reg_offset_y = NO_REGISTER;
+		reg_addr->reg_num_x = M09_REGISTER_NUM_X;
+		reg_addr->reg_num_y = M09_REGISTER_NUM_Y;
+		break;
+
+	case EV_FT:
+		reg_addr->reg_threshold = EV_REGISTER_THRESHOLD;
+		reg_addr->reg_report_rate = NO_REGISTER;
+		reg_addr->reg_gain = EV_REGISTER_GAIN;
+		reg_addr->reg_offset = NO_REGISTER;
+		reg_addr->reg_offset_x = EV_REGISTER_OFFSET_X;
+		reg_addr->reg_offset_y = EV_REGISTER_OFFSET_Y;
+		reg_addr->reg_num_x = NO_REGISTER;
+		reg_addr->reg_num_y = NO_REGISTER;
+		break;
+
+	case GENERIC_FT:
+		/* this is a guesswork */
+		reg_addr->reg_threshold = M09_REGISTER_THRESHOLD;
+		reg_addr->reg_report_rate = NO_REGISTER;
+		reg_addr->reg_gain = M09_REGISTER_GAIN;
+		reg_addr->reg_offset = M09_REGISTER_OFFSET;
+		reg_addr->reg_offset_x = NO_REGISTER;
+		reg_addr->reg_offset_y = NO_REGISTER;
+		reg_addr->reg_num_x = NO_REGISTER;
+		reg_addr->reg_num_y = NO_REGISTER;
+		break;
+	}
+}
+
+static void edt_ft5x06_disable_regulators(void *arg)
+{
+	struct edt_ft5x06_ts_data *data = arg;
+
+	regulator_disable(data->vcc);
+	regulator_disable(data->iovcc);
+}
+
+static int edt_ft5x06_ts_probe(struct i2c_client *client)
+{
+	const struct i2c_device_id *id = i2c_client_get_device_id(client);
+	const struct edt_i2c_chip_data *chip_data;
+	struct edt_ft5x06_ts_data *tsdata;
+	u8 buf[2] = { 0xfc, 0x00 };
+	struct input_dev *input;
+	unsigned long irq_flags;
+	int error;
+	u32 report_rate;
+
+	dev_dbg(&client->dev, "probing for EDT FT5x06 I2C\n");
+
+	tsdata = devm_kzalloc(&client->dev, sizeof(*tsdata), GFP_KERNEL);
+	if (!tsdata) {
+		dev_err(&client->dev, "failed to allocate driver data.\n");
+		return -ENOMEM;
+	}
+
+	chip_data = device_get_match_data(&client->dev);
+	if (!chip_data)
+		chip_data = (const struct edt_i2c_chip_data *)id->driver_data;
+	if (!chip_data || !chip_data->max_support_points) {
+		dev_err(&client->dev, "invalid or missing chip data\n");
+		return -EINVAL;
+	}
+
+	tsdata->max_support_points = chip_data->max_support_points;
+
+	tsdata->vcc = devm_regulator_get(&client->dev, "vcc");
+	if (IS_ERR(tsdata->vcc)) {
+		error = PTR_ERR(tsdata->vcc);
+		if (error != -EPROBE_DEFER)
+			dev_err(&client->dev,
+				"failed to request regulator: %d\n", error);
+		return error;
+	}
+
+	tsdata->iovcc = devm_regulator_get(&client->dev, "iovcc");
+	if (IS_ERR(tsdata->iovcc)) {
+		error = PTR_ERR(tsdata->iovcc);
+		if (error != -EPROBE_DEFER)
+			dev_err(&client->dev,
+				"failed to request iovcc regulator: %d\n", error);
+		return error;
+	}
+
+	error = regulator_enable(tsdata->iovcc);
+	if (error < 0) {
+		dev_err(&client->dev, "failed to enable iovcc: %d\n", error);
+		return error;
+	}
+
+	/* Delay enabling VCC for > 10us (T_ivd) after IOVCC */
+	usleep_range(10, 100);
+
+	error = regulator_enable(tsdata->vcc);
+	if (error < 0) {
+		dev_err(&client->dev, "failed to enable vcc: %d\n", error);
+		regulator_disable(tsdata->iovcc);
+		return error;
+	}
+
+	error = devm_add_action_or_reset(&client->dev,
+					 edt_ft5x06_disable_regulators,
+					 tsdata);
+	if (error)
+		return error;
+
+	tsdata->reset_gpio = devm_gpiod_get_optional(&client->dev,
+						     "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(tsdata->reset_gpio)) {
+		error = PTR_ERR(tsdata->reset_gpio);
+		dev_err(&client->dev,
+			"Failed to request GPIO reset pin, error %d\n", error);
+		return error;
+	}
+
+	tsdata->wake_gpio = devm_gpiod_get_optional(&client->dev,
+						    "wake", GPIOD_OUT_LOW);
+	if (IS_ERR(tsdata->wake_gpio)) {
+		error = PTR_ERR(tsdata->wake_gpio);
+		dev_err(&client->dev,
+			"Failed to request GPIO wake pin, error %d\n", error);
+		return error;
+	}
+
+	/*
+	 * Check which sleep modes we can support. Power-off requieres the
+	 * reset-pin to ensure correct power-down/power-up behaviour. Start with
+	 * the EDT_PMODE_POWEROFF test since this is the deepest possible sleep
+	 * mode.
+	 */
+	if (tsdata->reset_gpio)
+		tsdata->suspend_mode = EDT_PMODE_POWEROFF;
+	else if (tsdata->wake_gpio)
+		tsdata->suspend_mode = EDT_PMODE_HIBERNATE;
+	else
+		tsdata->suspend_mode = EDT_PMODE_NOT_SUPPORTED;
+
+	if (tsdata->wake_gpio) {
+		usleep_range(5000, 6000);
+		gpiod_set_value_cansleep(tsdata->wake_gpio, 1);
+	}
+
+	if (tsdata->reset_gpio) {
+		usleep_range(5000, 6000);
+		gpiod_set_value_cansleep(tsdata->reset_gpio, 0);
+		msleep(300);
+	}
+
+	input = devm_input_allocate_device(&client->dev);
+	if (!input) {
+		dev_err(&client->dev, "failed to allocate input device.\n");
+		return -ENOMEM;
+	}
+
+	mutex_init(&tsdata->mutex);
+	tsdata->client = client;
+	tsdata->input = input;
+	tsdata->factory_mode = false;
+
+	error = edt_ft5x06_ts_identify(client, tsdata);
+	if (error) {
+		dev_err(&client->dev, "touchscreen probe failed\n");
+		return error;
+	}
+
+	/*
+	 * Dummy read access. EP0700MLP1 returns bogus data on the first
+	 * register read access and ignores writes.
+	 */
+	edt_ft5x06_ts_readwrite(tsdata->client, 2, buf, 2, buf);
+
+	edt_ft5x06_ts_set_regs(tsdata);
+	edt_ft5x06_ts_get_defaults(&client->dev, tsdata);
+	edt_ft5x06_ts_get_parameters(tsdata);
+
+	if (tsdata->reg_addr.reg_report_rate != NO_REGISTER &&
+	    !device_property_read_u32(&client->dev,
+				      "report-rate-hz", &report_rate)) {
+		if (tsdata->version == EDT_M06)
+			tsdata->report_rate = clamp_val(report_rate, 30, 140);
+		else
+			tsdata->report_rate = clamp_val(report_rate, 1, 255);
+
+		if (report_rate != tsdata->report_rate)
+			dev_warn(&client->dev,
+				 "report-rate %dHz is unsupported, use %dHz\n",
+				 report_rate, tsdata->report_rate);
+
+		if (tsdata->version == EDT_M06)
+			tsdata->report_rate /= 10;
+
+		edt_ft5x06_register_write(tsdata,
+					  tsdata->reg_addr.reg_report_rate,
+					  tsdata->report_rate);
+	}
+
+	dev_dbg(&client->dev,
+		"Model \"%s\", Rev. \"%s\", %dx%d sensors\n",
+		tsdata->name, tsdata->fw_version, tsdata->num_x, tsdata->num_y);
+
+	input->name = tsdata->name;
+	input->id.bustype = BUS_I2C;
+	input->dev.parent = &client->dev;
+
+	input_set_abs_params(input, ABS_MT_POSITION_X,
+			     0, tsdata->num_x * 64 - 1, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_Y,
+			     0, tsdata->num_y * 64 - 1, 0, 0);
+
+	touchscreen_parse_properties(input, true, &tsdata->prop);
+
+	error = input_mt_init_slots(input, tsdata->max_support_points,
+				INPUT_MT_DIRECT);
+	if (error) {
+		dev_err(&client->dev, "Unable to init MT slots.\n");
+		return error;
+	}
+
+	i2c_set_clientdata(client, tsdata);
+
+	irq_flags = irq_get_trigger_type(client->irq);
+	if (irq_flags == IRQF_TRIGGER_NONE)
+		irq_flags = IRQF_TRIGGER_FALLING;
+	irq_flags |= IRQF_ONESHOT;
+
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					NULL, edt_ft5x06_ts_isr, irq_flags,
+					client->name, tsdata);
+	if (error) {
+		dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
+		return error;
+	}
+
+	error = devm_device_add_group(&client->dev, &edt_ft5x06_attr_group);
+	if (error)
+		return error;
+
+	error = input_register_device(input);
+	if (error)
+		return error;
+
+	edt_ft5x06_ts_prepare_debugfs(tsdata, dev_driver_string(&client->dev));
+
+	dev_dbg(&client->dev,
+		"EDT FT5x06 initialized: IRQ %d, WAKE pin %d, Reset pin %d.\n",
+		client->irq,
+		tsdata->wake_gpio ? desc_to_gpio(tsdata->wake_gpio) : -1,
+		tsdata->reset_gpio ? desc_to_gpio(tsdata->reset_gpio) : -1);
+
+	return 0;
+}
+
+static void edt_ft5x06_ts_remove(struct i2c_client *client)
+{
+	struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
+
+	edt_ft5x06_ts_teardown_debugfs(tsdata);
+}
+
+static int __maybe_unused edt_ft5x06_ts_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
+	struct gpio_desc *reset_gpio = tsdata->reset_gpio;
+	int ret;
+
+	if (device_may_wakeup(dev))
+		return 0;
+
+	if (tsdata->suspend_mode == EDT_PMODE_NOT_SUPPORTED)
+		return 0;
+
+	/* Enter hibernate mode. */
+	ret = edt_ft5x06_register_write(tsdata, PMOD_REGISTER_OPMODE,
+					PMOD_REGISTER_HIBERNATE);
+	if (ret)
+		dev_warn(dev, "Failed to set hibernate mode\n");
+
+	if (tsdata->suspend_mode == EDT_PMODE_HIBERNATE)
+		return 0;
+
+	/*
+	 * Power-off according the datasheet. Cut the power may leaf the irq
+	 * line in an undefined state depending on the host pull resistor
+	 * settings. Disable the irq to avoid adjusting each host till the
+	 * device is back in a full functional state.
+	 */
+	disable_irq(tsdata->client->irq);
+
+	gpiod_set_value_cansleep(reset_gpio, 1);
+	usleep_range(1000, 2000);
+
+	ret = regulator_disable(tsdata->vcc);
+	if (ret)
+		dev_warn(dev, "Failed to disable vcc\n");
+	ret = regulator_disable(tsdata->iovcc);
+	if (ret)
+		dev_warn(dev, "Failed to disable iovcc\n");
+
+	return 0;
+}
+
+static int __maybe_unused edt_ft5x06_ts_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
+	int ret = 0;
+
+	if (device_may_wakeup(dev))
+		return 0;
+
+	if (tsdata->suspend_mode == EDT_PMODE_NOT_SUPPORTED)
+		return 0;
+
+	if (tsdata->suspend_mode == EDT_PMODE_POWEROFF) {
+		struct gpio_desc *reset_gpio = tsdata->reset_gpio;
+
+		/*
+		 * We can't check if the regulator is a dummy or a real
+		 * regulator. So we need to specify the 5ms reset time (T_rst)
+		 * here instead of the 100us T_rtp time. We also need to wait
+		 * 300ms in case it was a real supply and the power was cutted
+		 * of. Toggle the reset pin is also a way to exit the hibernate
+		 * mode.
+		 */
+		gpiod_set_value_cansleep(reset_gpio, 1);
+		usleep_range(5000, 6000);
+
+		ret = regulator_enable(tsdata->iovcc);
+		if (ret) {
+			dev_err(dev, "Failed to enable iovcc\n");
+			return ret;
+		}
+
+		/* Delay enabling VCC for > 10us (T_ivd) after IOVCC */
+		usleep_range(10, 100);
+
+		ret = regulator_enable(tsdata->vcc);
+		if (ret) {
+			dev_err(dev, "Failed to enable vcc\n");
+			regulator_disable(tsdata->iovcc);
+			return ret;
+		}
+
+		usleep_range(1000, 2000);
+		gpiod_set_value_cansleep(reset_gpio, 0);
+		msleep(300);
+
+		edt_ft5x06_restore_reg_parameters(tsdata);
+		enable_irq(tsdata->client->irq);
+
+		if (tsdata->factory_mode)
+			ret = edt_ft5x06_factory_mode(tsdata);
+	} else {
+		struct gpio_desc *wake_gpio = tsdata->wake_gpio;
+
+		gpiod_set_value_cansleep(wake_gpio, 0);
+		usleep_range(5000, 6000);
+		gpiod_set_value_cansleep(wake_gpio, 1);
+	}
+
+
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(edt_ft5x06_ts_pm_ops,
+			 edt_ft5x06_ts_suspend, edt_ft5x06_ts_resume);
+
+static const struct edt_i2c_chip_data edt_ft5x06_data = {
+	.max_support_points = 5,
+};
+
+static const struct edt_i2c_chip_data edt_ft5506_data = {
+	.max_support_points = 10,
+};
+
+static const struct edt_i2c_chip_data edt_ft6236_data = {
+	.max_support_points = 2,
+};
+
+static const struct i2c_device_id edt_ft5x06_ts_id[] = {
+	{ .name = "edt-ft5x06", .driver_data = (long)&edt_ft5x06_data },
+	{ .name = "edt-ft5506", .driver_data = (long)&edt_ft5506_data },
+	{ .name = "ev-ft5726", .driver_data = (long)&edt_ft5506_data },
+	/* Note no edt- prefix for compatibility with the ft6236.c driver */
+	{ .name = "ft6236", .driver_data = (long)&edt_ft6236_data },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, edt_ft5x06_ts_id);
+
+static const struct of_device_id edt_ft5x06_of_match[] = {
+	{ .compatible = "edt,edt-ft5206", .data = &edt_ft5x06_data },
+	{ .compatible = "edt,edt-ft5306", .data = &edt_ft5x06_data },
+	{ .compatible = "edt,edt-ft5406", .data = &edt_ft5x06_data },
+	{ .compatible = "edt,edt-ft5506", .data = &edt_ft5506_data },
+	{ .compatible = "evervision,ev-ft5726", .data = &edt_ft5506_data },
+	/* Note focaltech vendor prefix for compatibility with ft6236.c */
+	{ .compatible = "focaltech,ft6236", .data = &edt_ft6236_data },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, edt_ft5x06_of_match);
+
+static struct i2c_driver edt_ft5x06_ts_driver = {
+	.driver = {
+		.name = "edt_ft5x06",
+		.of_match_table = edt_ft5x06_of_match,
+		.pm = &edt_ft5x06_ts_pm_ops,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.id_table = edt_ft5x06_ts_id,
+	.probe_new = edt_ft5x06_ts_probe,
+	.remove   = edt_ft5x06_ts_remove,
+};
+
+module_i2c_driver(edt_ft5x06_ts_driver);
+
+MODULE_AUTHOR("Simon Budig <simon.budig@kernelconcepts.de>");
+MODULE_DESCRIPTION("EDT FT5x06 I2C Touchscreen Driver");
+MODULE_LICENSE("GPL v2");