Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1605 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/melfas_mip4.c b/drivers/input/touchscreen/melfas_mip4.c
new file mode 100644
index 000000000..4ee8ed4c9
--- /dev/null
+++ b/drivers/input/touchscreen/melfas_mip4.c
@@ -0,0 +1,1605 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MELFAS MIP4 Touchscreen
+ *
+ * Copyright (C) 2016 MELFAS Inc.
+ *
+ * Author : Sangwon Jee <jeesw@melfas.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <asm/unaligned.h>
+
+#define MIP4_DEVICE_NAME	"mip4_ts"
+
+/*****************************************************************
+ * Protocol
+ * Version : MIP 4.0 Rev 5.4
+ *****************************************************************/
+
+/* Address */
+#define MIP4_R0_BOOT				0x00
+#define MIP4_R1_BOOT_MODE			0x01
+#define MIP4_R1_BOOT_BUF_ADDR			0x10
+#define MIP4_R1_BOOT_STATUS			0x20
+#define MIP4_R1_BOOT_CMD			0x30
+#define MIP4_R1_BOOT_TARGET_ADDR		0x40
+#define MIP4_R1_BOOT_SIZE			0x44
+
+#define MIP4_R0_INFO				0x01
+#define MIP4_R1_INFO_PRODUCT_NAME		0x00
+#define MIP4_R1_INFO_RESOLUTION_X		0x10
+#define MIP4_R1_INFO_RESOLUTION_Y		0x12
+#define MIP4_R1_INFO_NODE_NUM_X			0x14
+#define MIP4_R1_INFO_NODE_NUM_Y			0x15
+#define MIP4_R1_INFO_KEY_NUM			0x16
+#define MIP4_R1_INFO_PRESSURE_NUM		0x17
+#define MIP4_R1_INFO_LENGTH_X			0x18
+#define MIP4_R1_INFO_LENGTH_Y			0x1A
+#define MIP4_R1_INFO_PPM_X			0x1C
+#define MIP4_R1_INFO_PPM_Y			0x1D
+#define MIP4_R1_INFO_VERSION_BOOT		0x20
+#define MIP4_R1_INFO_VERSION_CORE		0x22
+#define MIP4_R1_INFO_VERSION_APP		0x24
+#define MIP4_R1_INFO_VERSION_PARAM		0x26
+#define MIP4_R1_INFO_SECT_BOOT_START		0x30
+#define MIP4_R1_INFO_SECT_BOOT_END		0x31
+#define MIP4_R1_INFO_SECT_CORE_START		0x32
+#define MIP4_R1_INFO_SECT_CORE_END		0x33
+#define MIP4_R1_INFO_SECT_APP_START		0x34
+#define MIP4_R1_INFO_SECT_APP_END		0x35
+#define MIP4_R1_INFO_SECT_PARAM_START		0x36
+#define MIP4_R1_INFO_SECT_PARAM_END		0x37
+#define MIP4_R1_INFO_BUILD_DATE			0x40
+#define MIP4_R1_INFO_BUILD_TIME			0x44
+#define MIP4_R1_INFO_CHECKSUM_PRECALC		0x48
+#define MIP4_R1_INFO_CHECKSUM_REALTIME		0x4A
+#define MIP4_R1_INFO_PROTOCOL_NAME		0x50
+#define MIP4_R1_INFO_PROTOCOL_VERSION		0x58
+#define MIP4_R1_INFO_IC_ID			0x70
+#define MIP4_R1_INFO_IC_NAME			0x71
+#define MIP4_R1_INFO_IC_VENDOR_ID		0x75
+#define MIP4_R1_INFO_IC_HW_CATEGORY		0x77
+#define MIP4_R1_INFO_CONTACT_THD_SCR		0x78
+#define MIP4_R1_INFO_CONTACT_THD_KEY		0x7A
+#define MIP4_R1_INFO_PID				0x7C
+#define MIP4_R1_INFO_VID				0x7E
+#define MIP4_R1_INFO_SLAVE_ADDR			0x80
+
+#define MIP4_R0_EVENT				0x02
+#define MIP4_R1_EVENT_SUPPORTED_FUNC		0x00
+#define MIP4_R1_EVENT_FORMAT			0x04
+#define MIP4_R1_EVENT_SIZE			0x06
+#define MIP4_R1_EVENT_PACKET_INFO		0x10
+#define MIP4_R1_EVENT_PACKET_DATA		0x11
+
+#define MIP4_R0_CTRL				0x06
+#define MIP4_R1_CTRL_READY_STATUS		0x00
+#define MIP4_R1_CTRL_EVENT_READY		0x01
+#define MIP4_R1_CTRL_MODE			0x10
+#define MIP4_R1_CTRL_EVENT_TRIGGER_TYPE		0x11
+#define MIP4_R1_CTRL_RECALIBRATE		0x12
+#define MIP4_R1_CTRL_POWER_STATE		0x13
+#define MIP4_R1_CTRL_GESTURE_TYPE		0x14
+#define MIP4_R1_CTRL_DISABLE_ESD_ALERT		0x18
+#define MIP4_R1_CTRL_CHARGER_MODE		0x19
+#define MIP4_R1_CTRL_HIGH_SENS_MODE		0x1A
+#define MIP4_R1_CTRL_WINDOW_MODE		0x1B
+#define MIP4_R1_CTRL_PALM_REJECTION		0x1C
+#define MIP4_R1_CTRL_EDGE_CORRECTION		0x1D
+#define MIP4_R1_CTRL_ENTER_GLOVE_MODE		0x1E
+#define MIP4_R1_CTRL_I2C_ON_LPM			0x1F
+#define MIP4_R1_CTRL_GESTURE_DEBUG		0x20
+#define MIP4_R1_CTRL_PALM_EVENT			0x22
+#define MIP4_R1_CTRL_PROXIMITY_SENSING		0x23
+
+/* Value */
+#define MIP4_BOOT_MODE_BOOT			0x01
+#define MIP4_BOOT_MODE_APP			0x02
+
+#define MIP4_BOOT_STATUS_BUSY			0x05
+#define MIP4_BOOT_STATUS_ERROR			0x0E
+#define MIP4_BOOT_STATUS_DONE			0xA0
+
+#define MIP4_BOOT_CMD_MASS_ERASE		0x15
+#define MIP4_BOOT_CMD_PROGRAM			0x54
+#define MIP4_BOOT_CMD_ERASE			0x8F
+#define MIP4_BOOT_CMD_WRITE			0xA5
+#define MIP4_BOOT_CMD_READ			0xC2
+
+#define MIP4_EVENT_INPUT_TYPE_KEY		0
+#define MIP4_EVENT_INPUT_TYPE_SCREEN		1
+#define MIP4_EVENT_INPUT_TYPE_PROXIMITY		2
+
+#define I2C_RETRY_COUNT				3	/* 2~ */
+
+#define MIP4_BUF_SIZE				128
+#define MIP4_MAX_FINGERS			10
+#define MIP4_MAX_KEYS				4
+
+#define MIP4_TOUCH_MAJOR_MIN			0
+#define MIP4_TOUCH_MAJOR_MAX			255
+#define MIP4_TOUCH_MINOR_MIN			0
+#define MIP4_TOUCH_MINOR_MAX			255
+#define MIP4_PRESSURE_MIN			0
+#define MIP4_PRESSURE_MAX			255
+
+#define MIP4_FW_NAME			"melfas_mip4.fw"
+#define MIP4_FW_UPDATE_DEBUG		0	/* 0 (default) or 1 */
+
+struct mip4_fw_version {
+	u16 boot;
+	u16 core;
+	u16 app;
+	u16 param;
+};
+
+struct mip4_ts {
+	struct i2c_client *client;
+	struct input_dev *input;
+	struct gpio_desc *gpio_ce;
+
+	char phys[32];
+	char product_name[16];
+	u16 product_id;
+	char ic_name[4];
+	char fw_name[32];
+
+	unsigned int max_x;
+	unsigned int max_y;
+	u8 node_x;
+	u8 node_y;
+	u8 node_key;
+	unsigned int ppm_x;
+	unsigned int ppm_y;
+
+	struct mip4_fw_version fw_version;
+
+	unsigned int event_size;
+	unsigned int event_format;
+
+	unsigned int key_num;
+	unsigned short key_code[MIP4_MAX_KEYS];
+
+	bool wake_irq_enabled;
+
+	u8 buf[MIP4_BUF_SIZE];
+};
+
+static int mip4_i2c_xfer(struct mip4_ts *ts,
+			 char *write_buf, unsigned int write_len,
+			 char *read_buf, unsigned int read_len)
+{
+	struct i2c_msg msg[] = {
+		{
+			.addr = ts->client->addr,
+			.flags = 0,
+			.buf = write_buf,
+			.len = write_len,
+		}, {
+			.addr = ts->client->addr,
+			.flags = I2C_M_RD,
+			.buf = read_buf,
+			.len = read_len,
+		},
+	};
+	int retry = I2C_RETRY_COUNT;
+	int res;
+	int error;
+
+	do {
+		res = i2c_transfer(ts->client->adapter, msg, ARRAY_SIZE(msg));
+		if (res == ARRAY_SIZE(msg))
+			return 0;
+
+		error = res < 0 ? res : -EIO;
+		dev_err(&ts->client->dev,
+			"%s - i2c_transfer failed: %d (%d)\n",
+			__func__, error, res);
+	} while (--retry);
+
+	return error;
+}
+
+static void mip4_parse_fw_version(const u8 *buf, struct mip4_fw_version *v)
+{
+	v->boot  = get_unaligned_le16(buf + 0);
+	v->core  = get_unaligned_le16(buf + 2);
+	v->app   = get_unaligned_le16(buf + 4);
+	v->param = get_unaligned_le16(buf + 6);
+}
+
+/*
+ * Read chip firmware version
+ */
+static int mip4_get_fw_version(struct mip4_ts *ts)
+{
+	u8 cmd[] = { MIP4_R0_INFO, MIP4_R1_INFO_VERSION_BOOT };
+	u8 buf[sizeof(ts->fw_version)];
+	int error;
+
+	error = mip4_i2c_xfer(ts, cmd, sizeof(cmd), buf, sizeof(buf));
+	if (error) {
+		memset(&ts->fw_version, 0xff, sizeof(ts->fw_version));
+		return error;
+	}
+
+	mip4_parse_fw_version(buf, &ts->fw_version);
+
+	return 0;
+}
+
+/*
+ * Fetch device characteristics
+ */
+static int mip4_query_device(struct mip4_ts *ts)
+{
+	union i2c_smbus_data dummy;
+	int error;
+	u8 cmd[2];
+	u8 buf[14];
+
+	/*
+	 * Make sure there is something at this address as we do not
+	 * consider subsequent failures as fatal.
+	 */
+	if (i2c_smbus_xfer(ts->client->adapter, ts->client->addr,
+			   0, I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &dummy) < 0) {
+		dev_err(&ts->client->dev, "nothing at this address\n");
+		return -ENXIO;
+	}
+
+	/* Product name */
+	cmd[0] = MIP4_R0_INFO;
+	cmd[1] = MIP4_R1_INFO_PRODUCT_NAME;
+	error = mip4_i2c_xfer(ts, cmd, sizeof(cmd),
+			      ts->product_name, sizeof(ts->product_name));
+	if (error)
+		dev_warn(&ts->client->dev,
+			 "Failed to retrieve product name: %d\n", error);
+	else
+		dev_dbg(&ts->client->dev, "product name: %.*s\n",
+			(int)sizeof(ts->product_name), ts->product_name);
+
+	/* Product ID */
+	cmd[0] = MIP4_R0_INFO;
+	cmd[1] = MIP4_R1_INFO_PID;
+	error = mip4_i2c_xfer(ts, cmd, sizeof(cmd), buf, 2);
+	if (error) {
+		dev_warn(&ts->client->dev,
+			 "Failed to retrieve product id: %d\n", error);
+	} else {
+		ts->product_id = get_unaligned_le16(&buf[0]);
+		dev_dbg(&ts->client->dev, "product id: %04X\n", ts->product_id);
+	}
+
+	/* Firmware name */
+	snprintf(ts->fw_name, sizeof(ts->fw_name),
+		"melfas_mip4_%04X.fw", ts->product_id);
+	dev_dbg(&ts->client->dev, "firmware name: %s\n", ts->fw_name);
+
+	/* IC name */
+	cmd[0] = MIP4_R0_INFO;
+	cmd[1] = MIP4_R1_INFO_IC_NAME;
+	error = mip4_i2c_xfer(ts, cmd, sizeof(cmd),
+			      ts->ic_name, sizeof(ts->ic_name));
+	if (error)
+		dev_warn(&ts->client->dev,
+			 "Failed to retrieve IC name: %d\n", error);
+	else
+		dev_dbg(&ts->client->dev, "IC name: %.*s\n",
+			(int)sizeof(ts->ic_name), ts->ic_name);
+
+	/* Firmware version */
+	error = mip4_get_fw_version(ts);
+	if (error)
+		dev_warn(&ts->client->dev,
+			"Failed to retrieve FW version: %d\n", error);
+	else
+		dev_dbg(&ts->client->dev, "F/W Version: %04X %04X %04X %04X\n",
+			 ts->fw_version.boot, ts->fw_version.core,
+			 ts->fw_version.app, ts->fw_version.param);
+
+	/* Resolution */
+	cmd[0] = MIP4_R0_INFO;
+	cmd[1] = MIP4_R1_INFO_RESOLUTION_X;
+	error = mip4_i2c_xfer(ts, cmd, sizeof(cmd), buf, 14);
+	if (error) {
+		dev_warn(&ts->client->dev,
+			 "Failed to retrieve touchscreen parameters: %d\n",
+			 error);
+	} else {
+		ts->max_x = get_unaligned_le16(&buf[0]);
+		ts->max_y = get_unaligned_le16(&buf[2]);
+		dev_dbg(&ts->client->dev, "max_x: %d, max_y: %d\n",
+			ts->max_x, ts->max_y);
+
+		ts->node_x = buf[4];
+		ts->node_y = buf[5];
+		ts->node_key = buf[6];
+		dev_dbg(&ts->client->dev,
+			"node_x: %d, node_y: %d, node_key: %d\n",
+			ts->node_x, ts->node_y, ts->node_key);
+
+		ts->ppm_x = buf[12];
+		ts->ppm_y = buf[13];
+		dev_dbg(&ts->client->dev, "ppm_x: %d, ppm_y: %d\n",
+			ts->ppm_x, ts->ppm_y);
+
+		/* Key ts */
+		if (ts->node_key > 0)
+			ts->key_num = ts->node_key;
+	}
+
+	/* Protocol */
+	cmd[0] = MIP4_R0_EVENT;
+	cmd[1] = MIP4_R1_EVENT_SUPPORTED_FUNC;
+	error = mip4_i2c_xfer(ts, cmd, sizeof(cmd), buf, 7);
+	if (error) {
+		dev_warn(&ts->client->dev,
+			"Failed to retrieve device type: %d\n", error);
+		ts->event_format = 0xff;
+	} else {
+		ts->event_format = get_unaligned_le16(&buf[4]);
+		ts->event_size = buf[6];
+		dev_dbg(&ts->client->dev, "event_format: %d, event_size: %d\n",
+			ts->event_format, ts->event_size);
+
+		if (ts->event_format == 2 || ts->event_format > 3)
+			dev_warn(&ts->client->dev,
+				 "Unknown event format %d\n", ts->event_format);
+	}
+
+	return 0;
+}
+
+static int mip4_power_on(struct mip4_ts *ts)
+{
+	if (ts->gpio_ce) {
+		gpiod_set_value_cansleep(ts->gpio_ce, 1);
+
+		/* Booting delay : 200~300ms */
+		usleep_range(200 * 1000, 300 * 1000);
+	}
+
+	return 0;
+}
+
+static void mip4_power_off(struct mip4_ts *ts)
+{
+	if (ts->gpio_ce)
+		gpiod_set_value_cansleep(ts->gpio_ce, 0);
+}
+
+/*
+ * Clear touch input event status
+ */
+static void mip4_clear_input(struct mip4_ts *ts)
+{
+	int i;
+
+	/* Screen */
+	for (i = 0; i < MIP4_MAX_FINGERS; i++) {
+		input_mt_slot(ts->input, i);
+		input_mt_report_slot_inactive(ts->input);
+	}
+
+	/* Keys */
+	for (i = 0; i < ts->key_num; i++)
+		input_report_key(ts->input, ts->key_code[i], 0);
+
+	input_sync(ts->input);
+}
+
+static int mip4_enable(struct mip4_ts *ts)
+{
+	int error;
+
+	error = mip4_power_on(ts);
+	if (error)
+		return error;
+
+	enable_irq(ts->client->irq);
+
+	return 0;
+}
+
+static void mip4_disable(struct mip4_ts *ts)
+{
+	disable_irq(ts->client->irq);
+
+	mip4_power_off(ts);
+
+	mip4_clear_input(ts);
+}
+
+/*****************************************************************
+ * Input handling
+ *****************************************************************/
+
+static void mip4_report_keys(struct mip4_ts *ts, u8 *packet)
+{
+	u8 key;
+	bool down;
+
+	switch (ts->event_format) {
+	case 0:
+	case 1:
+		key = packet[0] & 0x0F;
+		down = packet[0] & 0x80;
+		break;
+
+	case 3:
+	default:
+		key = packet[0] & 0x0F;
+		down = packet[1] & 0x01;
+		break;
+	}
+
+	/* Report key event */
+	if (key >= 1 && key <= ts->key_num) {
+		unsigned short keycode = ts->key_code[key - 1];
+
+		dev_dbg(&ts->client->dev,
+			"Key - ID: %d, keycode: %d, state: %d\n",
+			key, keycode, down);
+
+		input_event(ts->input, EV_MSC, MSC_SCAN, keycode);
+		input_report_key(ts->input, keycode, down);
+
+	} else {
+		dev_err(&ts->client->dev, "Unknown key: %d\n", key);
+	}
+}
+
+static void mip4_report_touch(struct mip4_ts *ts, u8 *packet)
+{
+	int id;
+	bool __always_unused hover;
+	bool __always_unused palm;
+	bool state;
+	u16 x, y;
+	u8 __always_unused pressure_stage = 0;
+	u8 pressure;
+	u8 __always_unused size;
+	u8 touch_major;
+	u8 touch_minor;
+
+	switch (ts->event_format) {
+	case 0:
+	case 1:
+		/* Touch only */
+		state = packet[0] & BIT(7);
+		hover = packet[0] & BIT(5);
+		palm = packet[0] & BIT(4);
+		id = (packet[0] & 0x0F) - 1;
+		x = ((packet[1] & 0x0F) << 8) | packet[2];
+		y = (((packet[1] >> 4) & 0x0F) << 8) |
+			packet[3];
+		pressure = packet[4];
+		size = packet[5];
+		if (ts->event_format == 0) {
+			touch_major = packet[5];
+			touch_minor = packet[5];
+		} else {
+			touch_major = packet[6];
+			touch_minor = packet[7];
+		}
+		break;
+
+	case 3:
+	default:
+		/* Touch + Force(Pressure) */
+		id = (packet[0] & 0x0F) - 1;
+		hover = packet[1] & BIT(2);
+		palm = packet[1] & BIT(1);
+		state = packet[1] & BIT(0);
+		x = ((packet[2] & 0x0F) << 8) | packet[3];
+		y = (((packet[2] >> 4) & 0x0F) << 8) |
+			packet[4];
+		size = packet[6];
+		pressure_stage = (packet[7] & 0xF0) >> 4;
+		pressure = ((packet[7] & 0x0F) << 8) |
+			packet[8];
+		touch_major = packet[9];
+		touch_minor = packet[10];
+		break;
+	}
+
+	dev_dbg(&ts->client->dev,
+		"Screen - Slot: %d State: %d X: %04d Y: %04d Z: %d\n",
+		id, state, x, y, pressure);
+
+	if (unlikely(id < 0 || id >= MIP4_MAX_FINGERS)) {
+		dev_err(&ts->client->dev, "Screen - invalid slot ID: %d\n", id);
+	} else if (state) {
+		/* Press or Move event */
+		input_mt_slot(ts->input, id);
+		input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true);
+		input_report_abs(ts->input, ABS_MT_POSITION_X, x);
+		input_report_abs(ts->input, ABS_MT_POSITION_Y, y);
+		input_report_abs(ts->input, ABS_MT_PRESSURE, pressure);
+		input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR, touch_major);
+		input_report_abs(ts->input, ABS_MT_TOUCH_MINOR, touch_minor);
+	} else {
+		/* Release event */
+		input_mt_slot(ts->input, id);
+		input_mt_report_slot_inactive(ts->input);
+	}
+
+	input_mt_sync_frame(ts->input);
+}
+
+static int mip4_handle_packet(struct mip4_ts *ts, u8 *packet)
+{
+	u8 type;
+
+	switch (ts->event_format) {
+	case 0:
+	case 1:
+		type = (packet[0] & 0x40) >> 6;
+		break;
+
+	case 3:
+		type = (packet[0] & 0xF0) >> 4;
+		break;
+
+	default:
+		/* Should not happen unless we have corrupted firmware */
+		return -EINVAL;
+	}
+
+	dev_dbg(&ts->client->dev, "Type: %d\n", type);
+
+	/* Report input event */
+	switch (type) {
+	case MIP4_EVENT_INPUT_TYPE_KEY:
+		mip4_report_keys(ts, packet);
+		break;
+
+	case MIP4_EVENT_INPUT_TYPE_SCREEN:
+		mip4_report_touch(ts, packet);
+		break;
+
+	default:
+		dev_err(&ts->client->dev, "Unknown event type: %d\n", type);
+		break;
+	}
+
+	return 0;
+}
+
+static irqreturn_t mip4_interrupt(int irq, void *dev_id)
+{
+	struct mip4_ts *ts = dev_id;
+	struct i2c_client *client = ts->client;
+	unsigned int i;
+	int error;
+	u8 cmd[2];
+	u8 size;
+	bool alert;
+
+	/* Read packet info */
+	cmd[0] = MIP4_R0_EVENT;
+	cmd[1] = MIP4_R1_EVENT_PACKET_INFO;
+	error = mip4_i2c_xfer(ts, cmd, sizeof(cmd), ts->buf, 1);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to read packet info: %d\n", error);
+		goto out;
+	}
+
+	size = ts->buf[0] & 0x7F;
+	alert = ts->buf[0] & BIT(7);
+	dev_dbg(&client->dev, "packet size: %d, alert: %d\n", size, alert);
+
+	/* Check size */
+	if (!size) {
+		dev_err(&client->dev, "Empty packet\n");
+		goto out;
+	}
+
+	/* Read packet data */
+	cmd[0] = MIP4_R0_EVENT;
+	cmd[1] = MIP4_R1_EVENT_PACKET_DATA;
+	error = mip4_i2c_xfer(ts, cmd, sizeof(cmd), ts->buf, size);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to read packet data: %d\n", error);
+		goto out;
+	}
+
+	if (alert) {
+		dev_dbg(&client->dev, "Alert: %d\n", ts->buf[0]);
+	} else {
+		for (i = 0; i < size; i += ts->event_size) {
+			error = mip4_handle_packet(ts, &ts->buf[i]);
+			if (error)
+				break;
+		}
+
+		input_sync(ts->input);
+	}
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int mip4_input_open(struct input_dev *dev)
+{
+	struct mip4_ts *ts = input_get_drvdata(dev);
+
+	return mip4_enable(ts);
+}
+
+static void mip4_input_close(struct input_dev *dev)
+{
+	struct mip4_ts *ts = input_get_drvdata(dev);
+
+	mip4_disable(ts);
+}
+
+/*****************************************************************
+ * Firmware update
+ *****************************************************************/
+
+/* Firmware Info */
+#define MIP4_BL_PAGE_SIZE		512	/* 512 */
+#define MIP4_BL_PACKET_SIZE		512	/* 512, 256, 128, 64, ... */
+
+/*
+ * Firmware binary tail info
+ */
+
+struct mip4_bin_tail {
+	u8 tail_mark[4];
+	u8 chip_name[4];
+
+	__le32 bin_start_addr;
+	__le32 bin_length;
+
+	__le16 ver_boot;
+	__le16 ver_core;
+	__le16 ver_app;
+	__le16 ver_param;
+
+	u8 boot_start;
+	u8 boot_end;
+	u8 core_start;
+	u8 core_end;
+	u8 app_start;
+	u8 app_end;
+	u8 param_start;
+	u8 param_end;
+
+	u8 checksum_type;
+	u8 hw_category;
+
+	__le16 param_id;
+	__le32 param_length;
+	__le32 build_date;
+	__le32 build_time;
+
+	__le32 reserved1;
+	__le32 reserved2;
+	__le16 reserved3;
+	__le16 tail_size;
+	__le32 crc;
+} __packed;
+
+#define MIP4_BIN_TAIL_MARK	"MBT\001"
+#define MIP4_BIN_TAIL_SIZE	(sizeof(struct mip4_bin_tail))
+
+/*
+* Bootloader - Read status
+*/
+static int mip4_bl_read_status(struct mip4_ts *ts)
+{
+	u8 cmd[] = { MIP4_R0_BOOT, MIP4_R1_BOOT_STATUS };
+	u8 result;
+	struct i2c_msg msg[] = {
+		{
+			.addr = ts->client->addr,
+			.flags = 0,
+			.buf = cmd,
+			.len = sizeof(cmd),
+		}, {
+			.addr = ts->client->addr,
+			.flags = I2C_M_RD,
+			.buf = &result,
+			.len = sizeof(result),
+		},
+	};
+	int ret;
+	int error;
+	int retry = 1000;
+
+	do {
+		ret = i2c_transfer(ts->client->adapter, msg, ARRAY_SIZE(msg));
+		if (ret != ARRAY_SIZE(msg)) {
+			error = ret < 0 ? ret : -EIO;
+			dev_err(&ts->client->dev,
+				"Failed to read bootloader status: %d\n",
+				error);
+			return error;
+		}
+
+		switch (result) {
+		case MIP4_BOOT_STATUS_DONE:
+			dev_dbg(&ts->client->dev, "%s - done\n", __func__);
+			return 0;
+
+		case MIP4_BOOT_STATUS_ERROR:
+			dev_err(&ts->client->dev, "Bootloader failure\n");
+			return -EIO;
+
+		case MIP4_BOOT_STATUS_BUSY:
+			dev_dbg(&ts->client->dev, "%s - Busy\n", __func__);
+			error = -EBUSY;
+			break;
+
+		default:
+			dev_err(&ts->client->dev,
+				"Unexpected bootloader status: %#02x\n",
+				result);
+			error = -EINVAL;
+			break;
+		}
+
+		usleep_range(1000, 2000);
+	} while (--retry);
+
+	return error;
+}
+
+/*
+* Bootloader - Change mode
+*/
+static int mip4_bl_change_mode(struct mip4_ts *ts, u8 mode)
+{
+	u8 mode_chg_cmd[] = { MIP4_R0_BOOT, MIP4_R1_BOOT_MODE, mode };
+	u8 mode_read_cmd[] = { MIP4_R0_BOOT, MIP4_R1_BOOT_MODE };
+	u8 result;
+	struct i2c_msg msg[] = {
+		{
+			.addr = ts->client->addr,
+			.flags = 0,
+			.buf = mode_read_cmd,
+			.len = sizeof(mode_read_cmd),
+		}, {
+			.addr = ts->client->addr,
+			.flags = I2C_M_RD,
+			.buf = &result,
+			.len = sizeof(result),
+		},
+	};
+	int retry = 10;
+	int ret;
+	int error;
+
+	do {
+		/* Send mode change command */
+		ret = i2c_master_send(ts->client,
+				      mode_chg_cmd, sizeof(mode_chg_cmd));
+		if (ret != sizeof(mode_chg_cmd)) {
+			error = ret < 0 ? ret : -EIO;
+			dev_err(&ts->client->dev,
+				"Failed to send %d mode change: %d (%d)\n",
+				mode, error, ret);
+			return error;
+		}
+
+		dev_dbg(&ts->client->dev,
+			"Sent mode change request (mode: %d)\n", mode);
+
+		/* Wait */
+		msleep(1000);
+
+		/* Verify target mode */
+		ret = i2c_transfer(ts->client->adapter, msg, ARRAY_SIZE(msg));
+		if (ret != ARRAY_SIZE(msg)) {
+			error = ret < 0 ? ret : -EIO;
+			dev_err(&ts->client->dev,
+				"Failed to read device mode: %d\n", error);
+			return error;
+		}
+
+		dev_dbg(&ts->client->dev,
+			"Current device mode: %d, want: %d\n", result, mode);
+
+		if (result == mode)
+			return 0;
+
+	} while (--retry);
+
+	return -EIO;
+}
+
+/*
+ * Bootloader - Start bootloader mode
+ */
+static int mip4_bl_enter(struct mip4_ts *ts)
+{
+	return mip4_bl_change_mode(ts, MIP4_BOOT_MODE_BOOT);
+}
+
+/*
+ * Bootloader - Exit bootloader mode
+ */
+static int mip4_bl_exit(struct mip4_ts *ts)
+{
+	return mip4_bl_change_mode(ts, MIP4_BOOT_MODE_APP);
+}
+
+static int mip4_bl_get_address(struct mip4_ts *ts, u16 *buf_addr)
+{
+	u8 cmd[] = { MIP4_R0_BOOT, MIP4_R1_BOOT_BUF_ADDR };
+	u8 result[sizeof(u16)];
+	struct i2c_msg msg[] = {
+		{
+			.addr = ts->client->addr,
+			.flags = 0,
+			.buf = cmd,
+			.len = sizeof(cmd),
+		}, {
+			.addr = ts->client->addr,
+			.flags = I2C_M_RD,
+			.buf = result,
+			.len = sizeof(result),
+		},
+	};
+	int ret;
+	int error;
+
+	ret = i2c_transfer(ts->client->adapter, msg, ARRAY_SIZE(msg));
+	if (ret != ARRAY_SIZE(msg)) {
+		error = ret < 0 ? ret : -EIO;
+		dev_err(&ts->client->dev,
+			"Failed to retrieve bootloader buffer address: %d\n",
+			error);
+		return error;
+	}
+
+	*buf_addr = get_unaligned_le16(result);
+	dev_dbg(&ts->client->dev,
+		"Bootloader buffer address %#04x\n", *buf_addr);
+
+	return 0;
+}
+
+static int mip4_bl_program_page(struct mip4_ts *ts, int offset,
+				const u8 *data, int length, u16 buf_addr)
+{
+	u8 cmd[6];
+	u8 *data_buf;
+	u16 buf_offset;
+	int ret;
+	int error;
+
+	dev_dbg(&ts->client->dev, "Writing page @%#06x (%d)\n",
+		offset, length);
+
+	if (length > MIP4_BL_PAGE_SIZE || length % MIP4_BL_PACKET_SIZE) {
+		dev_err(&ts->client->dev,
+			"Invalid page length: %d\n", length);
+		return -EINVAL;
+	}
+
+	data_buf = kmalloc(2 + MIP4_BL_PACKET_SIZE, GFP_KERNEL);
+	if (!data_buf)
+		return -ENOMEM;
+
+	/* Addr */
+	cmd[0] = MIP4_R0_BOOT;
+	cmd[1] = MIP4_R1_BOOT_TARGET_ADDR;
+	put_unaligned_le32(offset, &cmd[2]);
+	ret = i2c_master_send(ts->client, cmd, 6);
+	if (ret != 6) {
+		error = ret < 0 ? ret : -EIO;
+		dev_err(&ts->client->dev,
+			"Failed to send write page address: %d\n", error);
+		goto out;
+	}
+
+	/* Size */
+	cmd[0] = MIP4_R0_BOOT;
+	cmd[1] = MIP4_R1_BOOT_SIZE;
+	put_unaligned_le32(length, &cmd[2]);
+	ret = i2c_master_send(ts->client, cmd, 6);
+	if (ret != 6) {
+		error = ret < 0 ? ret : -EIO;
+		dev_err(&ts->client->dev,
+			"Failed to send write page size: %d\n", error);
+		goto out;
+	}
+
+	/* Data */
+	for (buf_offset = 0;
+	     buf_offset < length;
+	     buf_offset += MIP4_BL_PACKET_SIZE) {
+		dev_dbg(&ts->client->dev,
+			"writing chunk at %#04x (size %d)\n",
+			buf_offset, MIP4_BL_PACKET_SIZE);
+		put_unaligned_be16(buf_addr + buf_offset, data_buf);
+		memcpy(&data_buf[2], &data[buf_offset], MIP4_BL_PACKET_SIZE);
+		ret = i2c_master_send(ts->client,
+				      data_buf, 2 + MIP4_BL_PACKET_SIZE);
+		if (ret != 2 + MIP4_BL_PACKET_SIZE) {
+			error = ret < 0 ? ret : -EIO;
+			dev_err(&ts->client->dev,
+				"Failed to read chunk at %#04x (size %d): %d\n",
+				buf_offset, MIP4_BL_PACKET_SIZE, error);
+			goto out;
+		}
+	}
+
+	/* Command */
+	cmd[0] = MIP4_R0_BOOT;
+	cmd[1] = MIP4_R1_BOOT_CMD;
+	cmd[2] = MIP4_BOOT_CMD_PROGRAM;
+	ret = i2c_master_send(ts->client, cmd, 3);
+	if (ret != 3) {
+		error = ret < 0 ? ret : -EIO;
+		dev_err(&ts->client->dev,
+			"Failed to send 'write' command: %d\n", error);
+		goto out;
+	}
+
+	/* Status */
+	error = mip4_bl_read_status(ts);
+
+out:
+	kfree(data_buf);
+	return error ? error : 0;
+}
+
+static int mip4_bl_verify_page(struct mip4_ts *ts, int offset,
+			       const u8 *data, int length, int buf_addr)
+{
+	u8 cmd[8];
+	u8 *read_buf;
+	int buf_offset;
+	struct i2c_msg msg[] = {
+		{
+			.addr = ts->client->addr,
+			.flags = 0,
+			.buf = cmd,
+			.len = 2,
+		}, {
+			.addr = ts->client->addr,
+			.flags = I2C_M_RD,
+			.len = MIP4_BL_PACKET_SIZE,
+		},
+	};
+	int ret;
+	int error;
+
+	dev_dbg(&ts->client->dev, "Validating page @%#06x (%d)\n",
+		offset, length);
+
+	/* Addr */
+	cmd[0] = MIP4_R0_BOOT;
+	cmd[1] = MIP4_R1_BOOT_TARGET_ADDR;
+	put_unaligned_le32(offset, &cmd[2]);
+	ret = i2c_master_send(ts->client, cmd, 6);
+	if (ret != 6) {
+		error = ret < 0 ? ret : -EIO;
+		dev_err(&ts->client->dev,
+			"Failed to send read page address: %d\n", error);
+		return error;
+	}
+
+	/* Size */
+	cmd[0] = MIP4_R0_BOOT;
+	cmd[1] = MIP4_R1_BOOT_SIZE;
+	put_unaligned_le32(length, &cmd[2]);
+	ret = i2c_master_send(ts->client, cmd, 6);
+	if (ret != 6) {
+		error = ret < 0 ? ret : -EIO;
+		dev_err(&ts->client->dev,
+			"Failed to send read page size: %d\n", error);
+		return error;
+	}
+
+	/* Command */
+	cmd[0] = MIP4_R0_BOOT;
+	cmd[1] = MIP4_R1_BOOT_CMD;
+	cmd[2] = MIP4_BOOT_CMD_READ;
+	ret = i2c_master_send(ts->client, cmd, 3);
+	if (ret != 3) {
+		error = ret < 0 ? ret : -EIO;
+		dev_err(&ts->client->dev,
+			"Failed to send 'read' command: %d\n", error);
+		return error;
+	}
+
+	/* Status */
+	error = mip4_bl_read_status(ts);
+	if (error)
+		return error;
+
+	/* Read */
+	msg[1].buf = read_buf = kmalloc(MIP4_BL_PACKET_SIZE, GFP_KERNEL);
+	if (!read_buf)
+		return -ENOMEM;
+
+	for (buf_offset = 0;
+	     buf_offset < length;
+	     buf_offset += MIP4_BL_PACKET_SIZE) {
+		dev_dbg(&ts->client->dev,
+			"reading chunk at %#04x (size %d)\n",
+			buf_offset, MIP4_BL_PACKET_SIZE);
+		put_unaligned_be16(buf_addr + buf_offset, cmd);
+		ret = i2c_transfer(ts->client->adapter, msg, ARRAY_SIZE(msg));
+		if (ret != ARRAY_SIZE(msg)) {
+			error = ret < 0 ? ret : -EIO;
+			dev_err(&ts->client->dev,
+				"Failed to read chunk at %#04x (size %d): %d\n",
+				buf_offset, MIP4_BL_PACKET_SIZE, error);
+			break;
+		}
+
+		if (memcmp(&data[buf_offset], read_buf, MIP4_BL_PACKET_SIZE)) {
+			dev_err(&ts->client->dev,
+				"Failed to validate chunk at %#04x (size %d)\n",
+				buf_offset, MIP4_BL_PACKET_SIZE);
+#if MIP4_FW_UPDATE_DEBUG
+			print_hex_dump(KERN_DEBUG,
+				       MIP4_DEVICE_NAME " F/W File: ",
+				       DUMP_PREFIX_OFFSET, 16, 1,
+				       data + offset, MIP4_BL_PACKET_SIZE,
+				       false);
+			print_hex_dump(KERN_DEBUG,
+				       MIP4_DEVICE_NAME " F/W Chip: ",
+				       DUMP_PREFIX_OFFSET, 16, 1,
+				       read_buf, MIP4_BL_PAGE_SIZE, false);
+#endif
+			error = -EINVAL;
+			break;
+		}
+	}
+
+	kfree(read_buf);
+	return error ? error : 0;
+}
+
+/*
+ * Flash chip firmware
+ */
+static int mip4_flash_fw(struct mip4_ts *ts,
+			 const u8 *fw_data, u32 fw_size, u32 fw_offset)
+{
+	struct i2c_client *client = ts->client;
+	int offset;
+	u16 buf_addr;
+	int error, error2;
+
+	/* Enter bootloader mode */
+	dev_dbg(&client->dev, "Entering bootloader mode\n");
+
+	error = mip4_bl_enter(ts);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to enter bootloader mode: %d\n",
+			error);
+		return error;
+	}
+
+	/* Read info */
+	error = mip4_bl_get_address(ts, &buf_addr);
+	if (error)
+		goto exit_bl;
+
+	/* Program & Verify */
+	dev_dbg(&client->dev,
+		"Program & Verify, page size: %d, packet size: %d\n",
+		MIP4_BL_PAGE_SIZE, MIP4_BL_PACKET_SIZE);
+
+	for (offset = fw_offset;
+	     offset < fw_offset + fw_size;
+	     offset += MIP4_BL_PAGE_SIZE) {
+		/* Program */
+		error = mip4_bl_program_page(ts, offset, fw_data + offset,
+					     MIP4_BL_PAGE_SIZE, buf_addr);
+		if (error)
+			break;
+
+		/* Verify */
+		error = mip4_bl_verify_page(ts, offset, fw_data + offset,
+					    MIP4_BL_PAGE_SIZE, buf_addr);
+		if (error)
+			break;
+	}
+
+exit_bl:
+	/* Exit bootloader mode */
+	dev_dbg(&client->dev, "Exiting bootloader mode\n");
+
+	error2 = mip4_bl_exit(ts);
+	if (error2) {
+		dev_err(&client->dev,
+			"Failed to exit bootloader mode: %d\n", error2);
+		if (!error)
+			error = error2;
+	}
+
+	/* Reset chip */
+	mip4_power_off(ts);
+	mip4_power_on(ts);
+
+	mip4_query_device(ts);
+
+	/* Refresh device parameters */
+	input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, ts->max_x, 0, 0);
+	input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, ts->max_y, 0, 0);
+	input_set_abs_params(ts->input, ABS_X, 0, ts->max_x, 0, 0);
+	input_set_abs_params(ts->input, ABS_Y, 0, ts->max_y, 0, 0);
+	input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->ppm_x);
+	input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->ppm_y);
+	input_abs_set_res(ts->input, ABS_X, ts->ppm_x);
+	input_abs_set_res(ts->input, ABS_Y, ts->ppm_y);
+
+	return error ? error : 0;
+}
+
+static int mip4_parse_firmware(struct mip4_ts *ts, const struct firmware *fw,
+			       u32 *fw_offset_start, u32 *fw_size,
+			       const struct mip4_bin_tail **pfw_info)
+{
+	const struct mip4_bin_tail *fw_info;
+	struct mip4_fw_version fw_version;
+	u16 tail_size;
+
+	if (fw->size < MIP4_BIN_TAIL_SIZE) {
+		dev_err(&ts->client->dev,
+			"Invalid firmware, size mismatch (tail %zd vs %zd)\n",
+			MIP4_BIN_TAIL_SIZE, fw->size);
+		return -EINVAL;
+	}
+
+	fw_info = (const void *)&fw->data[fw->size - MIP4_BIN_TAIL_SIZE];
+
+#if MIP4_FW_UPDATE_DEBUG
+	print_hex_dump(KERN_ERR, MIP4_DEVICE_NAME " Bin Info: ",
+		       DUMP_PREFIX_OFFSET, 16, 1, *fw_info, tail_size, false);
+#endif
+
+	tail_size = get_unaligned_le16(&fw_info->tail_size);
+	if (tail_size != MIP4_BIN_TAIL_SIZE) {
+		dev_err(&ts->client->dev,
+			"wrong tail size: %d (expected %zd)\n",
+			tail_size, MIP4_BIN_TAIL_SIZE);
+		return -EINVAL;
+	}
+
+	/* Check bin format */
+	if (memcmp(fw_info->tail_mark, MIP4_BIN_TAIL_MARK,
+		   sizeof(fw_info->tail_mark))) {
+		dev_err(&ts->client->dev,
+			"unable to locate tail marker (%*ph vs %*ph)\n",
+			(int)sizeof(fw_info->tail_mark), fw_info->tail_mark,
+			(int)sizeof(fw_info->tail_mark), MIP4_BIN_TAIL_MARK);
+		return -EINVAL;
+	}
+
+	*fw_offset_start = get_unaligned_le32(&fw_info->bin_start_addr);
+	*fw_size = get_unaligned_le32(&fw_info->bin_length);
+
+	dev_dbg(&ts->client->dev,
+		"F/W Data offset: %#08x, size: %d\n",
+		*fw_offset_start, *fw_size);
+
+	if (*fw_size % MIP4_BL_PAGE_SIZE) {
+		dev_err(&ts->client->dev,
+			"encoded fw length %d is not multiple of pages (%d)\n",
+			*fw_size, MIP4_BL_PAGE_SIZE);
+		return -EINVAL;
+	}
+
+	if (fw->size != *fw_offset_start + *fw_size) {
+		dev_err(&ts->client->dev,
+			"Wrong firmware size, expected %d bytes, got %zd\n",
+			*fw_offset_start + *fw_size, fw->size);
+		return -EINVAL;
+	}
+
+	mip4_parse_fw_version((const u8 *)&fw_info->ver_boot, &fw_version);
+
+	dev_dbg(&ts->client->dev,
+		"F/W file version %04X %04X %04X %04X\n",
+		fw_version.boot, fw_version.core,
+		fw_version.app, fw_version.param);
+
+	dev_dbg(&ts->client->dev, "F/W chip version: %04X %04X %04X %04X\n",
+		 ts->fw_version.boot, ts->fw_version.core,
+		 ts->fw_version.app, ts->fw_version.param);
+
+	/* Check F/W type */
+	if (fw_version.boot != 0xEEEE && fw_version.boot != 0xFFFF &&
+	    fw_version.core == 0xEEEE &&
+	    fw_version.app == 0xEEEE &&
+	    fw_version.param == 0xEEEE) {
+		dev_dbg(&ts->client->dev, "F/W type: Bootloader\n");
+	} else if (fw_version.boot == 0xEEEE &&
+		   fw_version.core != 0xEEEE && fw_version.core != 0xFFFF &&
+		   fw_version.app != 0xEEEE && fw_version.app != 0xFFFF &&
+		   fw_version.param != 0xEEEE && fw_version.param != 0xFFFF) {
+		dev_dbg(&ts->client->dev, "F/W type: Main\n");
+	} else {
+		dev_err(&ts->client->dev, "Wrong firmware type\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int mip4_execute_fw_update(struct mip4_ts *ts, const struct firmware *fw)
+{
+	const struct mip4_bin_tail *fw_info;
+	u32 fw_start_offset;
+	u32 fw_size;
+	int retires = 3;
+	int error;
+
+	error = mip4_parse_firmware(ts, fw,
+				    &fw_start_offset, &fw_size, &fw_info);
+	if (error)
+		return error;
+
+	if (input_device_enabled(ts->input)) {
+		disable_irq(ts->client->irq);
+	} else {
+		error = mip4_power_on(ts);
+		if (error)
+			return error;
+	}
+
+	/* Update firmware */
+	do {
+		error = mip4_flash_fw(ts, fw->data, fw_size, fw_start_offset);
+		if (!error)
+			break;
+	} while (--retires);
+
+	if (error)
+		dev_err(&ts->client->dev,
+			"Failed to flash firmware: %d\n", error);
+
+	/* Enable IRQ */
+	if (input_device_enabled(ts->input))
+		enable_irq(ts->client->irq);
+	else
+		mip4_power_off(ts);
+
+	return error ? error : 0;
+}
+
+static ssize_t mip4_sysfs_fw_update(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mip4_ts *ts = i2c_get_clientdata(client);
+	const struct firmware *fw;
+	int error;
+
+	error = request_firmware(&fw, ts->fw_name, dev);
+	if (error) {
+		dev_err(&ts->client->dev,
+			"Failed to retrieve firmware %s: %d\n",
+			ts->fw_name, error);
+		return error;
+	}
+
+	/*
+	 * Take input mutex to prevent racing with itself and also with
+	 * userspace opening and closing the device and also suspend/resume
+	 * transitions.
+	 */
+	mutex_lock(&ts->input->mutex);
+
+	error = mip4_execute_fw_update(ts, fw);
+
+	mutex_unlock(&ts->input->mutex);
+
+	release_firmware(fw);
+
+	if (error) {
+		dev_err(&ts->client->dev,
+			"Firmware update failed: %d\n", error);
+		return error;
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mip4_sysfs_fw_update);
+
+static ssize_t mip4_sysfs_read_fw_version(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mip4_ts *ts = i2c_get_clientdata(client);
+	size_t count;
+
+	/* Take lock to prevent racing with firmware update */
+	mutex_lock(&ts->input->mutex);
+
+	count = snprintf(buf, PAGE_SIZE, "%04X %04X %04X %04X\n",
+			 ts->fw_version.boot, ts->fw_version.core,
+			 ts->fw_version.app, ts->fw_version.param);
+
+	mutex_unlock(&ts->input->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(fw_version, S_IRUGO, mip4_sysfs_read_fw_version, NULL);
+
+static ssize_t mip4_sysfs_read_hw_version(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mip4_ts *ts = i2c_get_clientdata(client);
+	size_t count;
+
+	/* Take lock to prevent racing with firmware update */
+	mutex_lock(&ts->input->mutex);
+
+	/*
+	 * product_name shows the name or version of the hardware
+	 * paired with current firmware in the chip.
+	 */
+	count = snprintf(buf, PAGE_SIZE, "%.*s\n",
+			 (int)sizeof(ts->product_name), ts->product_name);
+
+	mutex_unlock(&ts->input->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(hw_version, S_IRUGO, mip4_sysfs_read_hw_version, NULL);
+
+static ssize_t mip4_sysfs_read_product_id(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mip4_ts *ts = i2c_get_clientdata(client);
+	size_t count;
+
+	mutex_lock(&ts->input->mutex);
+
+	count = snprintf(buf, PAGE_SIZE, "%04X\n", ts->product_id);
+
+	mutex_unlock(&ts->input->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(product_id, S_IRUGO, mip4_sysfs_read_product_id, NULL);
+
+static ssize_t mip4_sysfs_read_ic_name(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mip4_ts *ts = i2c_get_clientdata(client);
+	size_t count;
+
+	mutex_lock(&ts->input->mutex);
+
+	count = snprintf(buf, PAGE_SIZE, "%.*s\n",
+			 (int)sizeof(ts->ic_name), ts->ic_name);
+
+	mutex_unlock(&ts->input->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(ic_name, S_IRUGO, mip4_sysfs_read_ic_name, NULL);
+
+static struct attribute *mip4_attrs[] = {
+	&dev_attr_fw_version.attr,
+	&dev_attr_hw_version.attr,
+	&dev_attr_product_id.attr,
+	&dev_attr_ic_name.attr,
+	&dev_attr_update_fw.attr,
+	NULL,
+};
+
+static const struct attribute_group mip4_attr_group = {
+	.attrs = mip4_attrs,
+};
+
+static int mip4_probe(struct i2c_client *client)
+{
+	struct mip4_ts *ts;
+	struct input_dev *input;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "Not supported I2C adapter\n");
+		return -ENXIO;
+	}
+
+	ts = devm_kzalloc(&client->dev, sizeof(*ts), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	input = devm_input_allocate_device(&client->dev);
+	if (!input)
+		return -ENOMEM;
+
+	ts->client = client;
+	ts->input = input;
+
+	snprintf(ts->phys, sizeof(ts->phys),
+		 "%s/input0", dev_name(&client->dev));
+
+	ts->gpio_ce = devm_gpiod_get_optional(&client->dev,
+					      "ce", GPIOD_OUT_LOW);
+	if (IS_ERR(ts->gpio_ce)) {
+		error = PTR_ERR(ts->gpio_ce);
+		if (error != -EPROBE_DEFER)
+			dev_err(&client->dev,
+				"Failed to get gpio: %d\n", error);
+		return error;
+	}
+
+	error = mip4_power_on(ts);
+	if (error)
+		return error;
+	error = mip4_query_device(ts);
+	mip4_power_off(ts);
+	if (error)
+		return error;
+
+	input->name = "MELFAS MIP4 Touchscreen";
+	input->phys = ts->phys;
+
+	input->id.bustype = BUS_I2C;
+	input->id.vendor = 0x13c5;
+	input->id.product = ts->product_id;
+
+	input->open = mip4_input_open;
+	input->close = mip4_input_close;
+
+	input_set_drvdata(input, ts);
+
+	input->keycode = ts->key_code;
+	input->keycodesize = sizeof(*ts->key_code);
+	input->keycodemax = ts->key_num;
+
+	input_set_abs_params(input, ABS_MT_POSITION_X, 0, ts->max_x, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_Y, 0, ts->max_y, 0, 0);
+	input_set_abs_params(input, ABS_MT_PRESSURE,
+			     MIP4_PRESSURE_MIN, MIP4_PRESSURE_MAX, 0, 0);
+	input_set_abs_params(input, ABS_MT_TOUCH_MAJOR,
+			     MIP4_TOUCH_MAJOR_MIN, MIP4_TOUCH_MAJOR_MAX, 0, 0);
+	input_set_abs_params(input, ABS_MT_TOUCH_MINOR,
+			     MIP4_TOUCH_MINOR_MIN, MIP4_TOUCH_MINOR_MAX, 0, 0);
+	input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->ppm_x);
+	input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->ppm_y);
+
+	error = input_mt_init_slots(input, MIP4_MAX_FINGERS, INPUT_MT_DIRECT);
+	if (error)
+		return error;
+
+	i2c_set_clientdata(client, ts);
+
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					  NULL, mip4_interrupt,
+					  IRQF_ONESHOT | IRQF_NO_AUTOEN,
+					  MIP4_DEVICE_NAME, ts);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to request interrupt %d: %d\n",
+			client->irq, error);
+		return error;
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to register input device: %d\n", error);
+		return error;
+	}
+
+	error = devm_device_add_group(&client->dev, &mip4_attr_group);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to create sysfs attribute group: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int __maybe_unused mip4_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mip4_ts *ts = i2c_get_clientdata(client);
+	struct input_dev *input = ts->input;
+
+	mutex_lock(&input->mutex);
+
+	if (device_may_wakeup(dev))
+		ts->wake_irq_enabled = enable_irq_wake(client->irq) == 0;
+	else if (input_device_enabled(input))
+		mip4_disable(ts);
+
+	mutex_unlock(&input->mutex);
+
+	return 0;
+}
+
+static int __maybe_unused mip4_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mip4_ts *ts = i2c_get_clientdata(client);
+	struct input_dev *input = ts->input;
+
+	mutex_lock(&input->mutex);
+
+	if (ts->wake_irq_enabled)
+		disable_irq_wake(client->irq);
+	else if (input_device_enabled(input))
+		mip4_enable(ts);
+
+	mutex_unlock(&input->mutex);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(mip4_pm_ops, mip4_suspend, mip4_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id mip4_of_match[] = {
+	{ .compatible = "melfas,"MIP4_DEVICE_NAME, },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, mip4_of_match);
+#endif
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id mip4_acpi_match[] = {
+	{ "MLFS0000", 0},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, mip4_acpi_match);
+#endif
+
+static const struct i2c_device_id mip4_i2c_ids[] = {
+	{ MIP4_DEVICE_NAME, 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, mip4_i2c_ids);
+
+static struct i2c_driver mip4_driver = {
+	.id_table = mip4_i2c_ids,
+	.probe_new = mip4_probe,
+	.driver = {
+		.name = MIP4_DEVICE_NAME,
+		.of_match_table = of_match_ptr(mip4_of_match),
+		.acpi_match_table = ACPI_PTR(mip4_acpi_match),
+		.pm = &mip4_pm_ops,
+	},
+};
+module_i2c_driver(mip4_driver);
+
+MODULE_DESCRIPTION("MELFAS MIP4 Touchscreen");
+MODULE_AUTHOR("Sangwon Jee <jeesw@melfas.com>");
+MODULE_LICENSE("GPL");