Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 254 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/pcap_ts.c b/drivers/input/touchscreen/pcap_ts.c
new file mode 100644
index 000000000..b2da0194e
--- /dev/null
+++ b/drivers/input/touchscreen/pcap_ts.c
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for Motorola PCAP2 touchscreen as found in the EZX phone platform.
+ *
+ *  Copyright (C) 2006 Harald Welte <laforge@openezx.org>
+ *  Copyright (C) 2009 Daniel Ribeiro <drwyrm@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/pm.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/mfd/ezx-pcap.h>
+
+struct pcap_ts {
+	struct pcap_chip *pcap;
+	struct input_dev *input;
+	struct delayed_work work;
+	u16 x, y;
+	u16 pressure;
+	u8 read_state;
+};
+
+#define SAMPLE_DELAY	20 /* msecs */
+
+#define X_AXIS_MIN	0
+#define X_AXIS_MAX	1023
+#define Y_AXIS_MAX	X_AXIS_MAX
+#define Y_AXIS_MIN	X_AXIS_MIN
+#define PRESSURE_MAX	X_AXIS_MAX
+#define PRESSURE_MIN	X_AXIS_MIN
+
+static void pcap_ts_read_xy(void *data, u16 res[2])
+{
+	struct pcap_ts *pcap_ts = data;
+
+	switch (pcap_ts->read_state) {
+	case PCAP_ADC_TS_M_PRESSURE:
+		/* pressure reading is unreliable */
+		if (res[0] > PRESSURE_MIN && res[0] < PRESSURE_MAX)
+			pcap_ts->pressure = res[0];
+		pcap_ts->read_state = PCAP_ADC_TS_M_XY;
+		schedule_delayed_work(&pcap_ts->work, 0);
+		break;
+	case PCAP_ADC_TS_M_XY:
+		pcap_ts->y = res[0];
+		pcap_ts->x = res[1];
+		if (pcap_ts->x <= X_AXIS_MIN || pcap_ts->x >= X_AXIS_MAX ||
+		    pcap_ts->y <= Y_AXIS_MIN || pcap_ts->y >= Y_AXIS_MAX) {
+			/* pen has been released */
+			input_report_abs(pcap_ts->input, ABS_PRESSURE, 0);
+			input_report_key(pcap_ts->input, BTN_TOUCH, 0);
+
+			pcap_ts->read_state = PCAP_ADC_TS_M_STANDBY;
+			schedule_delayed_work(&pcap_ts->work, 0);
+		} else {
+			/* pen is touching the screen */
+			input_report_abs(pcap_ts->input, ABS_X, pcap_ts->x);
+			input_report_abs(pcap_ts->input, ABS_Y, pcap_ts->y);
+			input_report_key(pcap_ts->input, BTN_TOUCH, 1);
+			input_report_abs(pcap_ts->input, ABS_PRESSURE,
+						pcap_ts->pressure);
+
+			/* switch back to pressure read mode */
+			pcap_ts->read_state = PCAP_ADC_TS_M_PRESSURE;
+			schedule_delayed_work(&pcap_ts->work,
+					msecs_to_jiffies(SAMPLE_DELAY));
+		}
+		input_sync(pcap_ts->input);
+		break;
+	default:
+		dev_warn(&pcap_ts->input->dev,
+				"pcap_ts: Warning, unhandled read_state %d\n",
+				pcap_ts->read_state);
+		break;
+	}
+}
+
+static void pcap_ts_work(struct work_struct *work)
+{
+	struct delayed_work *dw = to_delayed_work(work);
+	struct pcap_ts *pcap_ts = container_of(dw, struct pcap_ts, work);
+	u8 ch[2];
+
+	pcap_set_ts_bits(pcap_ts->pcap,
+			pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
+
+	if (pcap_ts->read_state == PCAP_ADC_TS_M_STANDBY)
+		return;
+
+	/* start adc conversion */
+	ch[0] = PCAP_ADC_CH_TS_X1;
+	ch[1] = PCAP_ADC_CH_TS_Y1;
+	pcap_adc_async(pcap_ts->pcap, PCAP_ADC_BANK_1, 0, ch,
+						pcap_ts_read_xy, pcap_ts);
+}
+
+static irqreturn_t pcap_ts_event_touch(int pirq, void *data)
+{
+	struct pcap_ts *pcap_ts = data;
+
+	if (pcap_ts->read_state == PCAP_ADC_TS_M_STANDBY) {
+		pcap_ts->read_state = PCAP_ADC_TS_M_PRESSURE;
+		schedule_delayed_work(&pcap_ts->work, 0);
+	}
+	return IRQ_HANDLED;
+}
+
+static int pcap_ts_open(struct input_dev *dev)
+{
+	struct pcap_ts *pcap_ts = input_get_drvdata(dev);
+
+	pcap_ts->read_state = PCAP_ADC_TS_M_STANDBY;
+	schedule_delayed_work(&pcap_ts->work, 0);
+
+	return 0;
+}
+
+static void pcap_ts_close(struct input_dev *dev)
+{
+	struct pcap_ts *pcap_ts = input_get_drvdata(dev);
+
+	cancel_delayed_work_sync(&pcap_ts->work);
+
+	pcap_ts->read_state = PCAP_ADC_TS_M_NONTS;
+	pcap_set_ts_bits(pcap_ts->pcap,
+				pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
+}
+
+static int pcap_ts_probe(struct platform_device *pdev)
+{
+	struct input_dev *input_dev;
+	struct pcap_ts *pcap_ts;
+	int err = -ENOMEM;
+
+	pcap_ts = kzalloc(sizeof(*pcap_ts), GFP_KERNEL);
+	if (!pcap_ts)
+		return err;
+
+	pcap_ts->pcap = dev_get_drvdata(pdev->dev.parent);
+	platform_set_drvdata(pdev, pcap_ts);
+
+	input_dev = input_allocate_device();
+	if (!input_dev)
+		goto fail;
+
+	INIT_DELAYED_WORK(&pcap_ts->work, pcap_ts_work);
+
+	pcap_ts->read_state = PCAP_ADC_TS_M_NONTS;
+	pcap_set_ts_bits(pcap_ts->pcap,
+				pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
+
+	pcap_ts->input = input_dev;
+	input_set_drvdata(input_dev, pcap_ts);
+
+	input_dev->name = "pcap-touchscreen";
+	input_dev->phys = "pcap_ts/input0";
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0002;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &pdev->dev;
+	input_dev->open = pcap_ts_open;
+	input_dev->close = pcap_ts_close;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN,
+			     PRESSURE_MAX, 0, 0);
+
+	err = input_register_device(pcap_ts->input);
+	if (err)
+		goto fail_allocate;
+
+	err = request_irq(pcap_to_irq(pcap_ts->pcap, PCAP_IRQ_TS),
+			pcap_ts_event_touch, 0, "Touch Screen", pcap_ts);
+	if (err)
+		goto fail_register;
+
+	return 0;
+
+fail_register:
+	input_unregister_device(input_dev);
+	goto fail;
+fail_allocate:
+	input_free_device(input_dev);
+fail:
+	kfree(pcap_ts);
+
+	return err;
+}
+
+static int pcap_ts_remove(struct platform_device *pdev)
+{
+	struct pcap_ts *pcap_ts = platform_get_drvdata(pdev);
+
+	free_irq(pcap_to_irq(pcap_ts->pcap, PCAP_IRQ_TS), pcap_ts);
+	cancel_delayed_work_sync(&pcap_ts->work);
+
+	input_unregister_device(pcap_ts->input);
+
+	kfree(pcap_ts);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int pcap_ts_suspend(struct device *dev)
+{
+	struct pcap_ts *pcap_ts = dev_get_drvdata(dev);
+
+	pcap_set_ts_bits(pcap_ts->pcap, PCAP_ADC_TS_REF_LOWPWR);
+	return 0;
+}
+
+static int pcap_ts_resume(struct device *dev)
+{
+	struct pcap_ts *pcap_ts = dev_get_drvdata(dev);
+
+	pcap_set_ts_bits(pcap_ts->pcap,
+				pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
+	return 0;
+}
+
+static const struct dev_pm_ops pcap_ts_pm_ops = {
+	.suspend	= pcap_ts_suspend,
+	.resume		= pcap_ts_resume,
+};
+#define PCAP_TS_PM_OPS (&pcap_ts_pm_ops)
+#else
+#define PCAP_TS_PM_OPS NULL
+#endif
+
+static struct platform_driver pcap_ts_driver = {
+	.probe		= pcap_ts_probe,
+	.remove		= pcap_ts_remove,
+	.driver		= {
+		.name	= "pcap-ts",
+		.pm	= PCAP_TS_PM_OPS,
+	},
+};
+module_platform_driver(pcap_ts_driver);
+
+MODULE_DESCRIPTION("Motorola PCAP2 touchscreen driver");
+MODULE_AUTHOR("Daniel Ribeiro / Harald Welte");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pcap_ts");