Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 529 insertions, 0 deletions

diff --git a/drivers/leds/leds-lm355x.c b/drivers/leds/leds-lm355x.c
new file mode 100644
index 000000000..daa35927b
--- /dev/null
+++ b/drivers/leds/leds-lm355x.c
@@ -0,0 +1,529 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+* Simple driver for Texas Instruments LM355x LED Flash driver chip
+* Copyright (C) 2012 Texas Instruments
+*/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/fs.h>
+#include <linux/regmap.h>
+#include <linux/platform_data/leds-lm355x.h>
+
+enum lm355x_type {
+	CHIP_LM3554 = 0,
+	CHIP_LM3556,
+};
+
+enum lm355x_regs {
+	REG_FLAG = 0,
+	REG_TORCH_CFG,
+	REG_TORCH_CTRL,
+	REG_STROBE_CFG,
+	REG_FLASH_CTRL,
+	REG_INDI_CFG,
+	REG_INDI_CTRL,
+	REG_OPMODE,
+	REG_MAX,
+};
+
+/* operation mode */
+enum lm355x_mode {
+	MODE_SHDN = 0,
+	MODE_INDIC,
+	MODE_TORCH,
+	MODE_FLASH
+};
+
+/* register map info. */
+struct lm355x_reg_data {
+	u8 regno;
+	u8 mask;
+	u8 shift;
+};
+
+struct lm355x_chip_data {
+	struct device *dev;
+	enum lm355x_type type;
+
+	struct led_classdev cdev_flash;
+	struct led_classdev cdev_torch;
+	struct led_classdev cdev_indicator;
+
+	struct lm355x_platform_data *pdata;
+	struct regmap *regmap;
+	struct mutex lock;
+
+	unsigned int last_flag;
+	struct lm355x_reg_data *regs;
+};
+
+/* specific indicator function for lm3556 */
+enum lm3556_indic_pulse_time {
+	PULSE_TIME_0_MS = 0,
+	PULSE_TIME_32_MS,
+	PULSE_TIME_64_MS,
+	PULSE_TIME_92_MS,
+	PULSE_TIME_128_MS,
+	PULSE_TIME_160_MS,
+	PULSE_TIME_196_MS,
+	PULSE_TIME_224_MS,
+	PULSE_TIME_256_MS,
+	PULSE_TIME_288_MS,
+	PULSE_TIME_320_MS,
+	PULSE_TIME_352_MS,
+	PULSE_TIME_384_MS,
+	PULSE_TIME_416_MS,
+	PULSE_TIME_448_MS,
+	PULSE_TIME_480_MS,
+};
+
+enum lm3556_indic_n_blank {
+	INDIC_N_BLANK_0 = 0,
+	INDIC_N_BLANK_1,
+	INDIC_N_BLANK_2,
+	INDIC_N_BLANK_3,
+	INDIC_N_BLANK_4,
+	INDIC_N_BLANK_5,
+	INDIC_N_BLANK_6,
+	INDIC_N_BLANK_7,
+	INDIC_N_BLANK_8,
+	INDIC_N_BLANK_9,
+	INDIC_N_BLANK_10,
+	INDIC_N_BLANK_11,
+	INDIC_N_BLANK_12,
+	INDIC_N_BLANK_13,
+	INDIC_N_BLANK_14,
+	INDIC_N_BLANK_15,
+};
+
+enum lm3556_indic_period {
+	INDIC_PERIOD_0 = 0,
+	INDIC_PERIOD_1,
+	INDIC_PERIOD_2,
+	INDIC_PERIOD_3,
+	INDIC_PERIOD_4,
+	INDIC_PERIOD_5,
+	INDIC_PERIOD_6,
+	INDIC_PERIOD_7,
+};
+
+#define INDIC_PATTERN_SIZE 4
+
+struct indicator {
+	u8 blinking;
+	u8 period_cnt;
+};
+
+/* indicator pattern data only for lm3556 */
+static struct indicator indicator_pattern[INDIC_PATTERN_SIZE] = {
+	[0] = {(INDIC_N_BLANK_1 << 4) | PULSE_TIME_32_MS, INDIC_PERIOD_1},
+	[1] = {(INDIC_N_BLANK_15 << 4) | PULSE_TIME_32_MS, INDIC_PERIOD_2},
+	[2] = {(INDIC_N_BLANK_10 << 4) | PULSE_TIME_32_MS, INDIC_PERIOD_4},
+	[3] = {(INDIC_N_BLANK_5 << 4) | PULSE_TIME_32_MS, INDIC_PERIOD_7},
+};
+
+static struct lm355x_reg_data lm3554_regs[REG_MAX] = {
+	[REG_FLAG] = {0xD0, 0xBF, 0},
+	[REG_TORCH_CFG] = {0xE0, 0x80, 7},
+	[REG_TORCH_CTRL] = {0xA0, 0x38, 3},
+	[REG_STROBE_CFG] = {0xE0, 0x04, 2},
+	[REG_FLASH_CTRL] = {0xB0, 0x78, 3},
+	[REG_INDI_CFG] = {0xE0, 0x08, 3},
+	[REG_INDI_CTRL] = {0xA0, 0xC0, 6},
+	[REG_OPMODE] = {0xA0, 0x03, 0},
+};
+
+static struct lm355x_reg_data lm3556_regs[REG_MAX] = {
+	[REG_FLAG] = {0x0B, 0xFF, 0},
+	[REG_TORCH_CFG] = {0x0A, 0x10, 4},
+	[REG_TORCH_CTRL] = {0x09, 0x70, 4},
+	[REG_STROBE_CFG] = {0x0A, 0x20, 5},
+	[REG_FLASH_CTRL] = {0x09, 0x0F, 0},
+	[REG_INDI_CFG] = {0xFF, 0xFF, 0},
+	[REG_INDI_CTRL] = {0x09, 0x70, 4},
+	[REG_OPMODE] = {0x0A, 0x03, 0},
+};
+
+static char lm355x_name[][I2C_NAME_SIZE] = {
+	[CHIP_LM3554] = LM3554_NAME,
+	[CHIP_LM3556] = LM3556_NAME,
+};
+
+/* chip initialize */
+static int lm355x_chip_init(struct lm355x_chip_data *chip)
+{
+	int ret;
+	unsigned int reg_val;
+	struct lm355x_platform_data *pdata = chip->pdata;
+
+	/* input and output pins configuration */
+	switch (chip->type) {
+	case CHIP_LM3554:
+		reg_val = (u32)pdata->pin_tx2 | (u32)pdata->ntc_pin;
+		ret = regmap_update_bits(chip->regmap, 0xE0, 0x28, reg_val);
+		if (ret < 0)
+			goto out;
+		reg_val = (u32)pdata->pass_mode;
+		ret = regmap_update_bits(chip->regmap, 0xA0, 0x04, reg_val);
+		if (ret < 0)
+			goto out;
+		break;
+
+	case CHIP_LM3556:
+		reg_val = (u32)pdata->pin_tx2 | (u32)pdata->ntc_pin |
+		          (u32)pdata->pass_mode;
+		ret = regmap_update_bits(chip->regmap, 0x0A, 0xC4, reg_val);
+		if (ret < 0)
+			goto out;
+		break;
+	default:
+		return -ENODATA;
+	}
+
+	return ret;
+out:
+	dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
+	return ret;
+}
+
+/* chip control */
+static int lm355x_control(struct lm355x_chip_data *chip,
+			   u8 brightness, enum lm355x_mode opmode)
+{
+	int ret;
+	unsigned int reg_val;
+	struct lm355x_platform_data *pdata = chip->pdata;
+	struct lm355x_reg_data *preg = chip->regs;
+
+	ret = regmap_read(chip->regmap, preg[REG_FLAG].regno, &chip->last_flag);
+	if (ret < 0)
+		goto out;
+	if (chip->last_flag & preg[REG_FLAG].mask)
+		dev_info(chip->dev, "%s Last FLAG is 0x%x\n",
+			 lm355x_name[chip->type],
+			 chip->last_flag & preg[REG_FLAG].mask);
+	/* brightness 0 means shutdown */
+	if (!brightness)
+		opmode = MODE_SHDN;
+
+	switch (opmode) {
+	case MODE_TORCH:
+		ret =
+		    regmap_update_bits(chip->regmap, preg[REG_TORCH_CTRL].regno,
+				       preg[REG_TORCH_CTRL].mask,
+				       (brightness - 1)
+				       << preg[REG_TORCH_CTRL].shift);
+		if (ret < 0)
+			goto out;
+
+		if (pdata->pin_tx1 != LM355x_PIN_TORCH_DISABLE) {
+			ret =
+			    regmap_update_bits(chip->regmap,
+					       preg[REG_TORCH_CFG].regno,
+					       preg[REG_TORCH_CFG].mask,
+					       0x01 <<
+					       preg[REG_TORCH_CFG].shift);
+			if (ret < 0)
+				goto out;
+			opmode = MODE_SHDN;
+			dev_info(chip->dev,
+				 "torch brt is set - ext. torch pin mode\n");
+		}
+		break;
+
+	case MODE_FLASH:
+
+		ret =
+		    regmap_update_bits(chip->regmap, preg[REG_FLASH_CTRL].regno,
+				       preg[REG_FLASH_CTRL].mask,
+				       (brightness - 1)
+				       << preg[REG_FLASH_CTRL].shift);
+		if (ret < 0)
+			goto out;
+
+		if (pdata->pin_strobe != LM355x_PIN_STROBE_DISABLE) {
+			if (chip->type == CHIP_LM3554)
+				reg_val = 0x00;
+			else
+				reg_val = 0x01;
+			ret =
+			    regmap_update_bits(chip->regmap,
+					       preg[REG_STROBE_CFG].regno,
+					       preg[REG_STROBE_CFG].mask,
+					       reg_val <<
+					       preg[REG_STROBE_CFG].shift);
+			if (ret < 0)
+				goto out;
+			opmode = MODE_SHDN;
+			dev_info(chip->dev,
+				 "flash brt is set - ext. strobe pin mode\n");
+		}
+		break;
+
+	case MODE_INDIC:
+		ret =
+		    regmap_update_bits(chip->regmap, preg[REG_INDI_CTRL].regno,
+				       preg[REG_INDI_CTRL].mask,
+				       (brightness - 1)
+				       << preg[REG_INDI_CTRL].shift);
+		if (ret < 0)
+			goto out;
+
+		if (pdata->pin_tx2 != LM355x_PIN_TX_DISABLE) {
+			ret =
+			    regmap_update_bits(chip->regmap,
+					       preg[REG_INDI_CFG].regno,
+					       preg[REG_INDI_CFG].mask,
+					       0x01 <<
+					       preg[REG_INDI_CFG].shift);
+			if (ret < 0)
+				goto out;
+			opmode = MODE_SHDN;
+		}
+		break;
+	case MODE_SHDN:
+		break;
+	default:
+		return -EINVAL;
+	}
+	/* operation mode control */
+	ret = regmap_update_bits(chip->regmap, preg[REG_OPMODE].regno,
+				 preg[REG_OPMODE].mask,
+				 opmode << preg[REG_OPMODE].shift);
+	if (ret < 0)
+		goto out;
+	return ret;
+out:
+	dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
+	return ret;
+}
+
+/* torch */
+
+static int lm355x_torch_brightness_set(struct led_classdev *cdev,
+					enum led_brightness brightness)
+{
+	struct lm355x_chip_data *chip =
+	    container_of(cdev, struct lm355x_chip_data, cdev_torch);
+	int ret;
+
+	mutex_lock(&chip->lock);
+	ret = lm355x_control(chip, brightness, MODE_TORCH);
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+/* flash */
+
+static int lm355x_strobe_brightness_set(struct led_classdev *cdev,
+					 enum led_brightness brightness)
+{
+	struct lm355x_chip_data *chip =
+	    container_of(cdev, struct lm355x_chip_data, cdev_flash);
+	int ret;
+
+	mutex_lock(&chip->lock);
+	ret = lm355x_control(chip, brightness, MODE_FLASH);
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+/* indicator */
+
+static int lm355x_indicator_brightness_set(struct led_classdev *cdev,
+					    enum led_brightness brightness)
+{
+	struct lm355x_chip_data *chip =
+	    container_of(cdev, struct lm355x_chip_data, cdev_indicator);
+	int ret;
+
+	mutex_lock(&chip->lock);
+	ret = lm355x_control(chip, brightness, MODE_INDIC);
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+/* indicator pattern only for lm3556*/
+static ssize_t pattern_store(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t size)
+{
+	ssize_t ret;
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lm355x_chip_data *chip =
+	    container_of(led_cdev, struct lm355x_chip_data, cdev_indicator);
+	unsigned int state;
+
+	ret = kstrtouint(buf, 10, &state);
+	if (ret)
+		goto out;
+	if (state > INDIC_PATTERN_SIZE - 1)
+		state = INDIC_PATTERN_SIZE - 1;
+
+	ret = regmap_write(chip->regmap, 0x04,
+			   indicator_pattern[state].blinking);
+	if (ret < 0)
+		goto out;
+
+	ret = regmap_write(chip->regmap, 0x05,
+			   indicator_pattern[state].period_cnt);
+	if (ret < 0)
+		goto out;
+
+	return size;
+out:
+	dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
+	return ret;
+}
+
+static DEVICE_ATTR_WO(pattern);
+
+static struct attribute *lm355x_indicator_attrs[] = {
+	&dev_attr_pattern.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(lm355x_indicator);
+
+static const struct regmap_config lm355x_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0xFF,
+};
+
+/* module initialize */
+static int lm355x_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	struct lm355x_platform_data *pdata = dev_get_platdata(&client->dev);
+	struct lm355x_chip_data *chip;
+
+	int err;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "i2c functionality check fail.\n");
+		return -EOPNOTSUPP;
+	}
+
+	if (pdata == NULL) {
+		dev_err(&client->dev, "needs Platform Data.\n");
+		return -ENODATA;
+	}
+
+	chip = devm_kzalloc(&client->dev,
+			    sizeof(struct lm355x_chip_data), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->dev = &client->dev;
+	chip->type = id->driver_data;
+	switch (id->driver_data) {
+	case CHIP_LM3554:
+		chip->regs = lm3554_regs;
+		break;
+	case CHIP_LM3556:
+		chip->regs = lm3556_regs;
+		break;
+	default:
+		return -ENOSYS;
+	}
+	chip->pdata = pdata;
+
+	chip->regmap = devm_regmap_init_i2c(client, &lm355x_regmap);
+	if (IS_ERR(chip->regmap)) {
+		err = PTR_ERR(chip->regmap);
+		dev_err(&client->dev,
+			"Failed to allocate register map: %d\n", err);
+		return err;
+	}
+
+	mutex_init(&chip->lock);
+	i2c_set_clientdata(client, chip);
+
+	err = lm355x_chip_init(chip);
+	if (err < 0)
+		goto err_out;
+
+	/* flash */
+	chip->cdev_flash.name = "flash";
+	chip->cdev_flash.max_brightness = 16;
+	chip->cdev_flash.brightness_set_blocking = lm355x_strobe_brightness_set;
+	chip->cdev_flash.default_trigger = "flash";
+	err = led_classdev_register(&client->dev, &chip->cdev_flash);
+	if (err < 0)
+		goto err_out;
+	/* torch */
+	chip->cdev_torch.name = "torch";
+	chip->cdev_torch.max_brightness = 8;
+	chip->cdev_torch.brightness_set_blocking = lm355x_torch_brightness_set;
+	chip->cdev_torch.default_trigger = "torch";
+	err = led_classdev_register(&client->dev, &chip->cdev_torch);
+	if (err < 0)
+		goto err_create_torch_file;
+	/* indicator */
+	chip->cdev_indicator.name = "indicator";
+	if (id->driver_data == CHIP_LM3554)
+		chip->cdev_indicator.max_brightness = 4;
+	else
+		chip->cdev_indicator.max_brightness = 8;
+	chip->cdev_indicator.brightness_set_blocking =
+					lm355x_indicator_brightness_set;
+	/* indicator pattern control only for LM3556 */
+	if (id->driver_data == CHIP_LM3556)
+		chip->cdev_indicator.groups = lm355x_indicator_groups;
+	err = led_classdev_register(&client->dev, &chip->cdev_indicator);
+	if (err < 0)
+		goto err_create_indicator_file;
+
+	dev_info(&client->dev, "%s is initialized\n",
+		 lm355x_name[id->driver_data]);
+	return 0;
+
+err_create_indicator_file:
+	led_classdev_unregister(&chip->cdev_torch);
+err_create_torch_file:
+	led_classdev_unregister(&chip->cdev_flash);
+err_out:
+	return err;
+}
+
+static void lm355x_remove(struct i2c_client *client)
+{
+	struct lm355x_chip_data *chip = i2c_get_clientdata(client);
+	struct lm355x_reg_data *preg = chip->regs;
+
+	regmap_write(chip->regmap, preg[REG_OPMODE].regno, 0);
+	led_classdev_unregister(&chip->cdev_indicator);
+	led_classdev_unregister(&chip->cdev_torch);
+	led_classdev_unregister(&chip->cdev_flash);
+	dev_info(&client->dev, "%s is removed\n", lm355x_name[chip->type]);
+}
+
+static const struct i2c_device_id lm355x_id[] = {
+	{LM3554_NAME, CHIP_LM3554},
+	{LM3556_NAME, CHIP_LM3556},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, lm355x_id);
+
+static struct i2c_driver lm355x_i2c_driver = {
+	.driver = {
+		   .name = LM355x_NAME,
+		   .pm = NULL,
+		   },
+	.probe = lm355x_probe,
+	.remove = lm355x_remove,
+	.id_table = lm355x_id,
+};
+
+module_i2c_driver(lm355x_i2c_driver);
+
+MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM355x");
+MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>");
+MODULE_AUTHOR("G.Shark Jeong <gshark.jeong@gmail.com>");
+MODULE_LICENSE("GPL v2");