Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 491 insertions, 0 deletions

diff --git a/drivers/leds/leds-lp8860.c b/drivers/leds/leds-lp8860.c
new file mode 100644
index 000000000..e2b36d318
--- /dev/null
+++ b/drivers/leds/leds-lp8860.c
@@ -0,0 +1,491 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TI LP8860 4-Channel LED Driver
+ *
+ * Copyright (C) 2014 Texas Instruments
+ *
+ * Author: Dan Murphy <dmurphy@ti.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/slab.h>
+
+#define LP8860_DISP_CL1_BRT_MSB		0x00
+#define LP8860_DISP_CL1_BRT_LSB		0x01
+#define LP8860_DISP_CL1_CURR_MSB	0x02
+#define LP8860_DISP_CL1_CURR_LSB	0x03
+#define LP8860_CL2_BRT_MSB		0x04
+#define LP8860_CL2_BRT_LSB		0x05
+#define LP8860_CL2_CURRENT		0x06
+#define LP8860_CL3_BRT_MSB		0x07
+#define LP8860_CL3_BRT_LSB		0x08
+#define LP8860_CL3_CURRENT		0x09
+#define LP8860_CL4_BRT_MSB		0x0a
+#define LP8860_CL4_BRT_LSB		0x0b
+#define LP8860_CL4_CURRENT		0x0c
+#define LP8860_CONFIG			0x0d
+#define LP8860_STATUS			0x0e
+#define LP8860_FAULT			0x0f
+#define LP8860_LED_FAULT		0x10
+#define LP8860_FAULT_CLEAR		0x11
+#define LP8860_ID			0x12
+#define LP8860_TEMP_MSB			0x13
+#define LP8860_TEMP_LSB			0x14
+#define LP8860_DISP_LED_CURR_MSB	0x15
+#define LP8860_DISP_LED_CURR_LSB	0x16
+#define LP8860_DISP_LED_PWM_MSB		0x17
+#define LP8860_DISP_LED_PWM_LSB		0x18
+#define LP8860_EEPROM_CNTRL		0x19
+#define LP8860_EEPROM_UNLOCK		0x1a
+
+#define LP8860_EEPROM_REG_0		0x60
+#define LP8860_EEPROM_REG_1		0x61
+#define LP8860_EEPROM_REG_2		0x62
+#define LP8860_EEPROM_REG_3		0x63
+#define LP8860_EEPROM_REG_4		0x64
+#define LP8860_EEPROM_REG_5		0x65
+#define LP8860_EEPROM_REG_6		0x66
+#define LP8860_EEPROM_REG_7		0x67
+#define LP8860_EEPROM_REG_8		0x68
+#define LP8860_EEPROM_REG_9		0x69
+#define LP8860_EEPROM_REG_10		0x6a
+#define LP8860_EEPROM_REG_11		0x6b
+#define LP8860_EEPROM_REG_12		0x6c
+#define LP8860_EEPROM_REG_13		0x6d
+#define LP8860_EEPROM_REG_14		0x6e
+#define LP8860_EEPROM_REG_15		0x6f
+#define LP8860_EEPROM_REG_16		0x70
+#define LP8860_EEPROM_REG_17		0x71
+#define LP8860_EEPROM_REG_18		0x72
+#define LP8860_EEPROM_REG_19		0x73
+#define LP8860_EEPROM_REG_20		0x74
+#define LP8860_EEPROM_REG_21		0x75
+#define LP8860_EEPROM_REG_22		0x76
+#define LP8860_EEPROM_REG_23		0x77
+#define LP8860_EEPROM_REG_24		0x78
+
+#define LP8860_LOCK_EEPROM		0x00
+#define LP8860_UNLOCK_EEPROM		0x01
+#define LP8860_PROGRAM_EEPROM		0x02
+#define LP8860_EEPROM_CODE_1		0x08
+#define LP8860_EEPROM_CODE_2		0xba
+#define LP8860_EEPROM_CODE_3		0xef
+
+#define LP8860_CLEAR_FAULTS		0x01
+
+#define LP8860_NAME			"lp8860"
+
+/**
+ * struct lp8860_led
+ * @lock: Lock for reading/writing the device
+ * @client: Pointer to the I2C client
+ * @led_dev: led class device pointer
+ * @regmap: Devices register map
+ * @eeprom_regmap: EEPROM register map
+ * @enable_gpio: VDDIO/EN gpio to enable communication interface
+ * @regulator: LED supply regulator pointer
+ */
+struct lp8860_led {
+	struct mutex lock;
+	struct i2c_client *client;
+	struct led_classdev led_dev;
+	struct regmap *regmap;
+	struct regmap *eeprom_regmap;
+	struct gpio_desc *enable_gpio;
+	struct regulator *regulator;
+};
+
+struct lp8860_eeprom_reg {
+	uint8_t reg;
+	uint8_t value;
+};
+
+static struct lp8860_eeprom_reg lp8860_eeprom_disp_regs[] = {
+	{ LP8860_EEPROM_REG_0, 0xed },
+	{ LP8860_EEPROM_REG_1, 0xdf },
+	{ LP8860_EEPROM_REG_2, 0xdc },
+	{ LP8860_EEPROM_REG_3, 0xf0 },
+	{ LP8860_EEPROM_REG_4, 0xdf },
+	{ LP8860_EEPROM_REG_5, 0xe5 },
+	{ LP8860_EEPROM_REG_6, 0xf2 },
+	{ LP8860_EEPROM_REG_7, 0x77 },
+	{ LP8860_EEPROM_REG_8, 0x77 },
+	{ LP8860_EEPROM_REG_9, 0x71 },
+	{ LP8860_EEPROM_REG_10, 0x3f },
+	{ LP8860_EEPROM_REG_11, 0xb7 },
+	{ LP8860_EEPROM_REG_12, 0x17 },
+	{ LP8860_EEPROM_REG_13, 0xef },
+	{ LP8860_EEPROM_REG_14, 0xb0 },
+	{ LP8860_EEPROM_REG_15, 0x87 },
+	{ LP8860_EEPROM_REG_16, 0xce },
+	{ LP8860_EEPROM_REG_17, 0x72 },
+	{ LP8860_EEPROM_REG_18, 0xe5 },
+	{ LP8860_EEPROM_REG_19, 0xdf },
+	{ LP8860_EEPROM_REG_20, 0x35 },
+	{ LP8860_EEPROM_REG_21, 0x06 },
+	{ LP8860_EEPROM_REG_22, 0xdc },
+	{ LP8860_EEPROM_REG_23, 0x88 },
+	{ LP8860_EEPROM_REG_24, 0x3E },
+};
+
+static int lp8860_unlock_eeprom(struct lp8860_led *led, int lock)
+{
+	int ret;
+
+	mutex_lock(&led->lock);
+
+	if (lock == LP8860_UNLOCK_EEPROM) {
+		ret = regmap_write(led->regmap,
+			LP8860_EEPROM_UNLOCK,
+			LP8860_EEPROM_CODE_1);
+		if (ret) {
+			dev_err(&led->client->dev, "EEPROM Unlock failed\n");
+			goto out;
+		}
+
+		ret = regmap_write(led->regmap,
+			LP8860_EEPROM_UNLOCK,
+			LP8860_EEPROM_CODE_2);
+		if (ret) {
+			dev_err(&led->client->dev, "EEPROM Unlock failed\n");
+			goto out;
+		}
+		ret = regmap_write(led->regmap,
+			LP8860_EEPROM_UNLOCK,
+			LP8860_EEPROM_CODE_3);
+		if (ret) {
+			dev_err(&led->client->dev, "EEPROM Unlock failed\n");
+			goto out;
+		}
+	} else {
+		ret = regmap_write(led->regmap,
+			LP8860_EEPROM_UNLOCK,
+			LP8860_LOCK_EEPROM);
+	}
+
+out:
+	mutex_unlock(&led->lock);
+	return ret;
+}
+
+static int lp8860_fault_check(struct lp8860_led *led)
+{
+	int ret, fault;
+	unsigned int read_buf;
+
+	ret = regmap_read(led->regmap, LP8860_LED_FAULT, &read_buf);
+	if (ret)
+		goto out;
+
+	fault = read_buf;
+
+	ret = regmap_read(led->regmap, LP8860_FAULT, &read_buf);
+	if (ret)
+		goto out;
+
+	fault |= read_buf;
+
+	/* Attempt to clear any faults */
+	if (fault)
+		ret = regmap_write(led->regmap, LP8860_FAULT_CLEAR,
+			LP8860_CLEAR_FAULTS);
+out:
+	return ret;
+}
+
+static int lp8860_brightness_set(struct led_classdev *led_cdev,
+				enum led_brightness brt_val)
+{
+	struct lp8860_led *led =
+			container_of(led_cdev, struct lp8860_led, led_dev);
+	int disp_brightness = brt_val * 255;
+	int ret;
+
+	mutex_lock(&led->lock);
+
+	ret = lp8860_fault_check(led);
+	if (ret) {
+		dev_err(&led->client->dev, "Cannot read/clear faults\n");
+		goto out;
+	}
+
+	ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_MSB,
+			(disp_brightness & 0xff00) >> 8);
+	if (ret) {
+		dev_err(&led->client->dev, "Cannot write CL1 MSB\n");
+		goto out;
+	}
+
+	ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_LSB,
+			disp_brightness & 0xff);
+	if (ret) {
+		dev_err(&led->client->dev, "Cannot write CL1 LSB\n");
+		goto out;
+	}
+out:
+	mutex_unlock(&led->lock);
+	return ret;
+}
+
+static int lp8860_init(struct lp8860_led *led)
+{
+	unsigned int read_buf;
+	int ret, i, reg_count;
+
+	if (led->regulator) {
+		ret = regulator_enable(led->regulator);
+		if (ret) {
+			dev_err(&led->client->dev,
+				"Failed to enable regulator\n");
+			return ret;
+		}
+	}
+
+	if (led->enable_gpio)
+		gpiod_direction_output(led->enable_gpio, 1);
+
+	ret = lp8860_fault_check(led);
+	if (ret)
+		goto out;
+
+	ret = regmap_read(led->regmap, LP8860_STATUS, &read_buf);
+	if (ret)
+		goto out;
+
+	ret = lp8860_unlock_eeprom(led, LP8860_UNLOCK_EEPROM);
+	if (ret) {
+		dev_err(&led->client->dev, "Failed unlocking EEPROM\n");
+		goto out;
+	}
+
+	reg_count = ARRAY_SIZE(lp8860_eeprom_disp_regs) / sizeof(lp8860_eeprom_disp_regs[0]);
+	for (i = 0; i < reg_count; i++) {
+		ret = regmap_write(led->eeprom_regmap,
+				lp8860_eeprom_disp_regs[i].reg,
+				lp8860_eeprom_disp_regs[i].value);
+		if (ret) {
+			dev_err(&led->client->dev, "Failed writing EEPROM\n");
+			goto out;
+		}
+	}
+
+	ret = lp8860_unlock_eeprom(led, LP8860_LOCK_EEPROM);
+	if (ret)
+		goto out;
+
+	ret = regmap_write(led->regmap,
+			LP8860_EEPROM_CNTRL,
+			LP8860_PROGRAM_EEPROM);
+	if (ret) {
+		dev_err(&led->client->dev, "Failed programming EEPROM\n");
+		goto out;
+	}
+
+	return ret;
+
+out:
+	if (ret)
+		if (led->enable_gpio)
+			gpiod_direction_output(led->enable_gpio, 0);
+
+	if (led->regulator) {
+		ret = regulator_disable(led->regulator);
+		if (ret)
+			dev_err(&led->client->dev,
+				"Failed to disable regulator\n");
+	}
+
+	return ret;
+}
+
+static const struct reg_default lp8860_reg_defs[] = {
+	{ LP8860_DISP_CL1_BRT_MSB, 0x00},
+	{ LP8860_DISP_CL1_BRT_LSB, 0x00},
+	{ LP8860_DISP_CL1_CURR_MSB, 0x00},
+	{ LP8860_DISP_CL1_CURR_LSB, 0x00},
+	{ LP8860_CL2_BRT_MSB, 0x00},
+	{ LP8860_CL2_BRT_LSB, 0x00},
+	{ LP8860_CL2_CURRENT, 0x00},
+	{ LP8860_CL3_BRT_MSB, 0x00},
+	{ LP8860_CL3_BRT_LSB, 0x00},
+	{ LP8860_CL3_CURRENT, 0x00},
+	{ LP8860_CL4_BRT_MSB, 0x00},
+	{ LP8860_CL4_BRT_LSB, 0x00},
+	{ LP8860_CL4_CURRENT, 0x00},
+	{ LP8860_CONFIG, 0x00},
+	{ LP8860_FAULT_CLEAR, 0x00},
+	{ LP8860_EEPROM_CNTRL, 0x80},
+	{ LP8860_EEPROM_UNLOCK, 0x00},
+};
+
+static const struct regmap_config lp8860_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = LP8860_EEPROM_UNLOCK,
+	.reg_defaults = lp8860_reg_defs,
+	.num_reg_defaults = ARRAY_SIZE(lp8860_reg_defs),
+	.cache_type = REGCACHE_NONE,
+};
+
+static const struct reg_default lp8860_eeprom_defs[] = {
+	{ LP8860_EEPROM_REG_0, 0x00 },
+	{ LP8860_EEPROM_REG_1, 0x00 },
+	{ LP8860_EEPROM_REG_2, 0x00 },
+	{ LP8860_EEPROM_REG_3, 0x00 },
+	{ LP8860_EEPROM_REG_4, 0x00 },
+	{ LP8860_EEPROM_REG_5, 0x00 },
+	{ LP8860_EEPROM_REG_6, 0x00 },
+	{ LP8860_EEPROM_REG_7, 0x00 },
+	{ LP8860_EEPROM_REG_8, 0x00 },
+	{ LP8860_EEPROM_REG_9, 0x00 },
+	{ LP8860_EEPROM_REG_10, 0x00 },
+	{ LP8860_EEPROM_REG_11, 0x00 },
+	{ LP8860_EEPROM_REG_12, 0x00 },
+	{ LP8860_EEPROM_REG_13, 0x00 },
+	{ LP8860_EEPROM_REG_14, 0x00 },
+	{ LP8860_EEPROM_REG_15, 0x00 },
+	{ LP8860_EEPROM_REG_16, 0x00 },
+	{ LP8860_EEPROM_REG_17, 0x00 },
+	{ LP8860_EEPROM_REG_18, 0x00 },
+	{ LP8860_EEPROM_REG_19, 0x00 },
+	{ LP8860_EEPROM_REG_20, 0x00 },
+	{ LP8860_EEPROM_REG_21, 0x00 },
+	{ LP8860_EEPROM_REG_22, 0x00 },
+	{ LP8860_EEPROM_REG_23, 0x00 },
+	{ LP8860_EEPROM_REG_24, 0x00 },
+};
+
+static const struct regmap_config lp8860_eeprom_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = LP8860_EEPROM_REG_24,
+	.reg_defaults = lp8860_eeprom_defs,
+	.num_reg_defaults = ARRAY_SIZE(lp8860_eeprom_defs),
+	.cache_type = REGCACHE_NONE,
+};
+
+static int lp8860_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	int ret;
+	struct lp8860_led *led;
+	struct device_node *np = dev_of_node(&client->dev);
+	struct device_node *child_node;
+	struct led_init_data init_data = {};
+
+	led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
+
+	child_node = of_get_next_available_child(np, NULL);
+	if (!child_node)
+		return -EINVAL;
+
+	led->enable_gpio = devm_gpiod_get_optional(&client->dev,
+						   "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(led->enable_gpio)) {
+		ret = PTR_ERR(led->enable_gpio);
+		dev_err(&client->dev, "Failed to get enable gpio: %d\n", ret);
+		return ret;
+	}
+
+	led->regulator = devm_regulator_get(&client->dev, "vled");
+	if (IS_ERR(led->regulator))
+		led->regulator = NULL;
+
+	led->client = client;
+	led->led_dev.brightness_set_blocking = lp8860_brightness_set;
+
+	mutex_init(&led->lock);
+
+	i2c_set_clientdata(client, led);
+
+	led->regmap = devm_regmap_init_i2c(client, &lp8860_regmap_config);
+	if (IS_ERR(led->regmap)) {
+		ret = PTR_ERR(led->regmap);
+		dev_err(&client->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	led->eeprom_regmap = devm_regmap_init_i2c(client, &lp8860_eeprom_regmap_config);
+	if (IS_ERR(led->eeprom_regmap)) {
+		ret = PTR_ERR(led->eeprom_regmap);
+		dev_err(&client->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = lp8860_init(led);
+	if (ret)
+		return ret;
+
+	init_data.fwnode = of_fwnode_handle(child_node);
+	init_data.devicename = LP8860_NAME;
+	init_data.default_label = ":display_cluster";
+
+	ret = devm_led_classdev_register_ext(&client->dev, &led->led_dev,
+					     &init_data);
+	if (ret) {
+		dev_err(&client->dev, "led register err: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void lp8860_remove(struct i2c_client *client)
+{
+	struct lp8860_led *led = i2c_get_clientdata(client);
+	int ret;
+
+	if (led->enable_gpio)
+		gpiod_direction_output(led->enable_gpio, 0);
+
+	if (led->regulator) {
+		ret = regulator_disable(led->regulator);
+		if (ret)
+			dev_err(&led->client->dev,
+				"Failed to disable regulator\n");
+	}
+
+	mutex_destroy(&led->lock);
+}
+
+static const struct i2c_device_id lp8860_id[] = {
+	{ "lp8860", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lp8860_id);
+
+static const struct of_device_id of_lp8860_leds_match[] = {
+	{ .compatible = "ti,lp8860", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_lp8860_leds_match);
+
+static struct i2c_driver lp8860_driver = {
+	.driver = {
+		.name	= "lp8860",
+		.of_match_table = of_lp8860_leds_match,
+	},
+	.probe		= lp8860_probe,
+	.remove		= lp8860_remove,
+	.id_table	= lp8860_id,
+};
+module_i2c_driver(lp8860_driver);
+
+MODULE_DESCRIPTION("Texas Instruments LP8860 LED driver");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
+MODULE_LICENSE("GPL v2");