Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 560 insertions, 0 deletions

diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
new file mode 100644
index 000000000..df83d97cb
--- /dev/null
+++ b/drivers/leds/leds-pca9532.c
@@ -0,0 +1,560 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * pca9532.c - 16-bit Led dimmer
+ *
+ * Copyright (C) 2011 Jan Weitzel
+ * Copyright (C) 2008 Riku Voipio
+ *
+ * Datasheet: http://www.nxp.com/documents/data_sheet/PCA9532.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/leds-pca9532.h>
+#include <linux/gpio/driver.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+/* m =  num_leds*/
+#define PCA9532_REG_INPUT(i)	((i) >> 3)
+#define PCA9532_REG_OFFSET(m)	((m) >> 4)
+#define PCA9532_REG_PSC(m, i)	(PCA9532_REG_OFFSET(m) + 0x1 + (i) * 2)
+#define PCA9532_REG_PWM(m, i)	(PCA9532_REG_OFFSET(m) + 0x2 + (i) * 2)
+#define LED_REG(m, led)		(PCA9532_REG_OFFSET(m) + 0x5 + (led >> 2))
+#define LED_NUM(led)		(led & 0x3)
+#define LED_SHIFT(led)		(LED_NUM(led) * 2)
+#define LED_MASK(led)		(0x3 << LED_SHIFT(led))
+
+#define ldev_to_led(c)       container_of(c, struct pca9532_led, ldev)
+
+struct pca9532_chip_info {
+	u8	num_leds;
+};
+
+struct pca9532_data {
+	struct i2c_client *client;
+	struct pca9532_led leds[16];
+	struct mutex update_lock;
+	struct input_dev *idev;
+	struct work_struct work;
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+	struct gpio_chip gpio;
+#endif
+	const struct pca9532_chip_info *chip_info;
+	u8 pwm[2];
+	u8 psc[2];
+};
+
+static int pca9532_probe(struct i2c_client *client,
+	const struct i2c_device_id *id);
+static void pca9532_remove(struct i2c_client *client);
+
+enum {
+	pca9530,
+	pca9531,
+	pca9532,
+	pca9533,
+};
+
+static const struct i2c_device_id pca9532_id[] = {
+	{ "pca9530", pca9530 },
+	{ "pca9531", pca9531 },
+	{ "pca9532", pca9532 },
+	{ "pca9533", pca9533 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, pca9532_id);
+
+static const struct pca9532_chip_info pca9532_chip_info_tbl[] = {
+	[pca9530] = {
+		.num_leds = 2,
+	},
+	[pca9531] = {
+		.num_leds = 8,
+	},
+	[pca9532] = {
+		.num_leds = 16,
+	},
+	[pca9533] = {
+		.num_leds = 4,
+	},
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id of_pca9532_leds_match[] = {
+	{ .compatible = "nxp,pca9530", .data = (void *)pca9530 },
+	{ .compatible = "nxp,pca9531", .data = (void *)pca9531 },
+	{ .compatible = "nxp,pca9532", .data = (void *)pca9532 },
+	{ .compatible = "nxp,pca9533", .data = (void *)pca9533 },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, of_pca9532_leds_match);
+#endif
+
+static struct i2c_driver pca9532_driver = {
+	.driver = {
+		.name = "leds-pca953x",
+		.of_match_table = of_match_ptr(of_pca9532_leds_match),
+	},
+	.probe = pca9532_probe,
+	.remove = pca9532_remove,
+	.id_table = pca9532_id,
+};
+
+/* We have two pwm/blinkers, but 16 possible leds to drive. Additionally,
+ * the clever Thecus people are using one pwm to drive the beeper. So,
+ * as a compromise we average one pwm to the values requested by all
+ * leds that are not ON/OFF.
+ * */
+static int pca9532_calcpwm(struct i2c_client *client, int pwm, int blink,
+	enum led_brightness value)
+{
+	int a = 0, b = 0, i = 0;
+	struct pca9532_data *data = i2c_get_clientdata(client);
+	for (i = 0; i < data->chip_info->num_leds; i++) {
+		if (data->leds[i].type == PCA9532_TYPE_LED &&
+			data->leds[i].state == PCA9532_PWM0+pwm) {
+				a++;
+				b += data->leds[i].ldev.brightness;
+		}
+	}
+	if (a == 0) {
+		dev_err(&client->dev,
+		"fear of division by zero %d/%d, wanted %d\n",
+			b, a, value);
+		return -EINVAL;
+	}
+	b = b/a;
+	if (b > 0xFF)
+		return -EINVAL;
+	data->pwm[pwm] = b;
+	data->psc[pwm] = blink;
+	return 0;
+}
+
+static int pca9532_setpwm(struct i2c_client *client, int pwm)
+{
+	struct pca9532_data *data = i2c_get_clientdata(client);
+	u8 maxleds = data->chip_info->num_leds;
+
+	mutex_lock(&data->update_lock);
+	i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(maxleds, pwm),
+		data->pwm[pwm]);
+	i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(maxleds, pwm),
+		data->psc[pwm]);
+	mutex_unlock(&data->update_lock);
+	return 0;
+}
+
+/* Set LED routing */
+static void pca9532_setled(struct pca9532_led *led)
+{
+	struct i2c_client *client = led->client;
+	struct pca9532_data *data = i2c_get_clientdata(client);
+	u8 maxleds = data->chip_info->num_leds;
+	char reg;
+
+	mutex_lock(&data->update_lock);
+	reg = i2c_smbus_read_byte_data(client, LED_REG(maxleds, led->id));
+	/* zero led bits */
+	reg = reg & ~LED_MASK(led->id);
+	/* set the new value */
+	reg = reg | (led->state << LED_SHIFT(led->id));
+	i2c_smbus_write_byte_data(client, LED_REG(maxleds, led->id), reg);
+	mutex_unlock(&data->update_lock);
+}
+
+static int pca9532_set_brightness(struct led_classdev *led_cdev,
+	enum led_brightness value)
+{
+	int err = 0;
+	struct pca9532_led *led = ldev_to_led(led_cdev);
+
+	if (value == LED_OFF)
+		led->state = PCA9532_OFF;
+	else if (value == LED_FULL)
+		led->state = PCA9532_ON;
+	else {
+		led->state = PCA9532_PWM0; /* Thecus: hardcode one pwm */
+		err = pca9532_calcpwm(led->client, 0, 0, value);
+		if (err)
+			return err;
+	}
+	if (led->state == PCA9532_PWM0)
+		pca9532_setpwm(led->client, 0);
+	pca9532_setled(led);
+	return err;
+}
+
+static int pca9532_set_blink(struct led_classdev *led_cdev,
+	unsigned long *delay_on, unsigned long *delay_off)
+{
+	struct pca9532_led *led = ldev_to_led(led_cdev);
+	struct i2c_client *client = led->client;
+	int psc;
+	int err = 0;
+
+	if (*delay_on == 0 && *delay_off == 0) {
+		/* led subsystem ask us for a blink rate */
+		*delay_on = 1000;
+		*delay_off = 1000;
+	}
+	if (*delay_on != *delay_off || *delay_on > 1690 || *delay_on < 6)
+		return -EINVAL;
+
+	/* Thecus specific: only use PSC/PWM 0 */
+	psc = (*delay_on * 152-1)/1000;
+	err = pca9532_calcpwm(client, 0, psc, led_cdev->brightness);
+	if (err)
+		return err;
+	if (led->state == PCA9532_PWM0)
+		pca9532_setpwm(led->client, 0);
+	pca9532_setled(led);
+
+	return 0;
+}
+
+static int pca9532_event(struct input_dev *dev, unsigned int type,
+	unsigned int code, int value)
+{
+	struct pca9532_data *data = input_get_drvdata(dev);
+
+	if (!(type == EV_SND && (code == SND_BELL || code == SND_TONE)))
+		return -1;
+
+	/* XXX: allow different kind of beeps with psc/pwm modifications */
+	if (value > 1 && value < 32767)
+		data->pwm[1] = 127;
+	else
+		data->pwm[1] = 0;
+
+	schedule_work(&data->work);
+
+	return 0;
+}
+
+static void pca9532_input_work(struct work_struct *work)
+{
+	struct pca9532_data *data =
+		container_of(work, struct pca9532_data, work);
+	u8 maxleds = data->chip_info->num_leds;
+
+	mutex_lock(&data->update_lock);
+	i2c_smbus_write_byte_data(data->client, PCA9532_REG_PWM(maxleds, 1),
+		data->pwm[1]);
+	mutex_unlock(&data->update_lock);
+}
+
+static enum pca9532_state pca9532_getled(struct pca9532_led *led)
+{
+	struct i2c_client *client = led->client;
+	struct pca9532_data *data = i2c_get_clientdata(client);
+	u8 maxleds = data->chip_info->num_leds;
+	char reg;
+	enum pca9532_state ret;
+
+	mutex_lock(&data->update_lock);
+	reg = i2c_smbus_read_byte_data(client, LED_REG(maxleds, led->id));
+	ret = (reg & LED_MASK(led->id)) >> LED_SHIFT(led->id);
+	mutex_unlock(&data->update_lock);
+	return ret;
+}
+
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+static int pca9532_gpio_request_pin(struct gpio_chip *gc, unsigned offset)
+{
+	struct pca9532_data *data = gpiochip_get_data(gc);
+	struct pca9532_led *led = &data->leds[offset];
+
+	if (led->type == PCA9532_TYPE_GPIO)
+		return 0;
+
+	return -EBUSY;
+}
+
+static void pca9532_gpio_set_value(struct gpio_chip *gc, unsigned offset, int val)
+{
+	struct pca9532_data *data = gpiochip_get_data(gc);
+	struct pca9532_led *led = &data->leds[offset];
+
+	if (val)
+		led->state = PCA9532_ON;
+	else
+		led->state = PCA9532_OFF;
+
+	pca9532_setled(led);
+}
+
+static int pca9532_gpio_get_value(struct gpio_chip *gc, unsigned offset)
+{
+	struct pca9532_data *data = gpiochip_get_data(gc);
+	unsigned char reg;
+
+	reg = i2c_smbus_read_byte_data(data->client, PCA9532_REG_INPUT(offset));
+
+	return !!(reg & (1 << (offset % 8)));
+}
+
+static int pca9532_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+	/* To use as input ensure pin is not driven */
+	pca9532_gpio_set_value(gc, offset, 0);
+
+	return 0;
+}
+
+static int pca9532_gpio_direction_output(struct gpio_chip *gc, unsigned offset, int val)
+{
+	pca9532_gpio_set_value(gc, offset, val);
+
+	return 0;
+}
+#endif /* CONFIG_LEDS_PCA9532_GPIO */
+
+static void pca9532_destroy_devices(struct pca9532_data *data, int n_devs)
+{
+	int i = n_devs;
+
+	while (--i >= 0) {
+		switch (data->leds[i].type) {
+		case PCA9532_TYPE_NONE:
+		case PCA9532_TYPE_GPIO:
+			break;
+		case PCA9532_TYPE_LED:
+			led_classdev_unregister(&data->leds[i].ldev);
+			break;
+		case PCA9532_TYPE_N2100_BEEP:
+			if (data->idev != NULL) {
+				cancel_work_sync(&data->work);
+				data->idev = NULL;
+			}
+			break;
+		}
+	}
+
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+	if (data->gpio.parent)
+		gpiochip_remove(&data->gpio);
+#endif
+}
+
+static int pca9532_configure(struct i2c_client *client,
+	struct pca9532_data *data, struct pca9532_platform_data *pdata)
+{
+	int i, err = 0;
+	int gpios = 0;
+	u8 maxleds = data->chip_info->num_leds;
+
+	for (i = 0; i < 2; i++)	{
+		data->pwm[i] = pdata->pwm[i];
+		data->psc[i] = pdata->psc[i];
+		i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(maxleds, i),
+			data->pwm[i]);
+		i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(maxleds, i),
+			data->psc[i]);
+	}
+
+	for (i = 0; i < data->chip_info->num_leds; i++) {
+		struct pca9532_led *led = &data->leds[i];
+		struct pca9532_led *pled = &pdata->leds[i];
+		led->client = client;
+		led->id = i;
+		led->type = pled->type;
+		switch (led->type) {
+		case PCA9532_TYPE_NONE:
+			break;
+		case PCA9532_TYPE_GPIO:
+			gpios++;
+			break;
+		case PCA9532_TYPE_LED:
+			if (pled->state == PCA9532_KEEP)
+				led->state = pca9532_getled(led);
+			else
+				led->state = pled->state;
+			led->name = pled->name;
+			led->ldev.name = led->name;
+			led->ldev.default_trigger = pled->default_trigger;
+			led->ldev.brightness = LED_OFF;
+			led->ldev.brightness_set_blocking =
+						pca9532_set_brightness;
+			led->ldev.blink_set = pca9532_set_blink;
+			err = led_classdev_register(&client->dev, &led->ldev);
+			if (err < 0) {
+				dev_err(&client->dev,
+					"couldn't register LED %s\n",
+					led->name);
+				goto exit;
+			}
+			pca9532_setled(led);
+			break;
+		case PCA9532_TYPE_N2100_BEEP:
+			BUG_ON(data->idev);
+			led->state = PCA9532_PWM1;
+			pca9532_setled(led);
+			data->idev = devm_input_allocate_device(&client->dev);
+			if (data->idev == NULL) {
+				err = -ENOMEM;
+				goto exit;
+			}
+			data->idev->name = pled->name;
+			data->idev->phys = "i2c/pca9532";
+			data->idev->id.bustype = BUS_HOST;
+			data->idev->id.vendor = 0x001f;
+			data->idev->id.product = 0x0001;
+			data->idev->id.version = 0x0100;
+			data->idev->evbit[0] = BIT_MASK(EV_SND);
+			data->idev->sndbit[0] = BIT_MASK(SND_BELL) |
+						BIT_MASK(SND_TONE);
+			data->idev->event = pca9532_event;
+			input_set_drvdata(data->idev, data);
+			INIT_WORK(&data->work, pca9532_input_work);
+			err = input_register_device(data->idev);
+			if (err) {
+				cancel_work_sync(&data->work);
+				data->idev = NULL;
+				goto exit;
+			}
+			break;
+		}
+	}
+
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+	if (gpios) {
+		data->gpio.label = "gpio-pca9532";
+		data->gpio.direction_input = pca9532_gpio_direction_input;
+		data->gpio.direction_output = pca9532_gpio_direction_output;
+		data->gpio.set = pca9532_gpio_set_value;
+		data->gpio.get = pca9532_gpio_get_value;
+		data->gpio.request = pca9532_gpio_request_pin;
+		data->gpio.can_sleep = 1;
+		data->gpio.base = pdata->gpio_base;
+		data->gpio.ngpio = data->chip_info->num_leds;
+		data->gpio.parent = &client->dev;
+		data->gpio.owner = THIS_MODULE;
+
+		err = gpiochip_add_data(&data->gpio, data);
+		if (err) {
+			/* Use data->gpio.dev as a flag for freeing gpiochip */
+			data->gpio.parent = NULL;
+			dev_warn(&client->dev, "could not add gpiochip\n");
+		} else {
+			dev_info(&client->dev, "gpios %i...%i\n",
+				data->gpio.base, data->gpio.base +
+				data->gpio.ngpio - 1);
+		}
+	}
+#endif
+
+	return 0;
+
+exit:
+	pca9532_destroy_devices(data, i);
+	return err;
+}
+
+static struct pca9532_platform_data *
+pca9532_of_populate_pdata(struct device *dev, struct device_node *np)
+{
+	struct pca9532_platform_data *pdata;
+	struct device_node *child;
+	int devid, maxleds;
+	int i = 0;
+	const char *state;
+
+	devid = (int)(uintptr_t)of_device_get_match_data(dev);
+	maxleds = pca9532_chip_info_tbl[devid].num_leds;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	pdata->gpio_base = -1;
+
+	of_property_read_u8_array(np, "nxp,pwm", &pdata->pwm[0],
+				  ARRAY_SIZE(pdata->pwm));
+	of_property_read_u8_array(np, "nxp,psc", &pdata->psc[0],
+				  ARRAY_SIZE(pdata->psc));
+
+	for_each_available_child_of_node(np, child) {
+		if (of_property_read_string(child, "label",
+					    &pdata->leds[i].name))
+			pdata->leds[i].name = child->name;
+		of_property_read_u32(child, "type", &pdata->leds[i].type);
+		of_property_read_string(child, "linux,default-trigger",
+					&pdata->leds[i].default_trigger);
+		if (!of_property_read_string(child, "default-state", &state)) {
+			if (!strcmp(state, "on"))
+				pdata->leds[i].state = PCA9532_ON;
+			else if (!strcmp(state, "keep"))
+				pdata->leds[i].state = PCA9532_KEEP;
+		}
+		if (++i >= maxleds) {
+			of_node_put(child);
+			break;
+		}
+	}
+
+	return pdata;
+}
+
+static int pca9532_probe(struct i2c_client *client,
+	const struct i2c_device_id *id)
+{
+	int devid;
+	struct pca9532_data *data = i2c_get_clientdata(client);
+	struct pca9532_platform_data *pca9532_pdata =
+			dev_get_platdata(&client->dev);
+	struct device_node *np = dev_of_node(&client->dev);
+
+	if (!pca9532_pdata) {
+		if (np) {
+			pca9532_pdata =
+				pca9532_of_populate_pdata(&client->dev, np);
+			if (IS_ERR(pca9532_pdata))
+				return PTR_ERR(pca9532_pdata);
+		} else {
+			dev_err(&client->dev, "no platform data\n");
+			return -EINVAL;
+		}
+		devid = (int)(uintptr_t)of_device_get_match_data(&client->dev);
+	} else {
+		devid = id->driver_data;
+	}
+
+	if (!i2c_check_functionality(client->adapter,
+		I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+
+	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->chip_info = &pca9532_chip_info_tbl[devid];
+
+	dev_info(&client->dev, "setting platform data\n");
+	i2c_set_clientdata(client, data);
+	data->client = client;
+	mutex_init(&data->update_lock);
+
+	return pca9532_configure(client, data, pca9532_pdata);
+}
+
+static void pca9532_remove(struct i2c_client *client)
+{
+	struct pca9532_data *data = i2c_get_clientdata(client);
+
+	pca9532_destroy_devices(data, data->chip_info->num_leds);
+}
+
+module_i2c_driver(pca9532_driver);
+
+MODULE_AUTHOR("Riku Voipio");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PCA 9532 LED dimmer");