Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 305 insertions, 0 deletions

diff --git a/drivers/leds/leds-wm831x-status.c b/drivers/leds/leds-wm831x-status.c
new file mode 100644
index 000000000..c48b80574
--- /dev/null
+++ b/drivers/leds/leds-wm831x-status.c
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * LED driver for WM831x status LEDs
+ *
+ * Copyright(C) 2009 Wolfson Microelectronics PLC.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/status.h>
+#include <linux/module.h>
+
+
+struct wm831x_status {
+	struct led_classdev cdev;
+	struct wm831x *wm831x;
+	struct mutex mutex;
+
+	spinlock_t value_lock;
+	int reg;     /* Control register */
+	int reg_val; /* Control register value */
+
+	int blink;
+	int blink_time;
+	int blink_cyc;
+	int src;
+	enum led_brightness brightness;
+};
+
+#define to_wm831x_status(led_cdev) \
+	container_of(led_cdev, struct wm831x_status, cdev)
+
+static void wm831x_status_set(struct wm831x_status *led)
+{
+	unsigned long flags;
+
+	mutex_lock(&led->mutex);
+
+	led->reg_val &= ~(WM831X_LED_SRC_MASK | WM831X_LED_MODE_MASK |
+			  WM831X_LED_DUTY_CYC_MASK | WM831X_LED_DUR_MASK);
+
+	spin_lock_irqsave(&led->value_lock, flags);
+
+	led->reg_val |= led->src << WM831X_LED_SRC_SHIFT;
+	if (led->blink) {
+		led->reg_val |= 2 << WM831X_LED_MODE_SHIFT;
+		led->reg_val |= led->blink_time << WM831X_LED_DUR_SHIFT;
+		led->reg_val |= led->blink_cyc;
+	} else {
+		if (led->brightness != LED_OFF)
+			led->reg_val |= 1 << WM831X_LED_MODE_SHIFT;
+	}
+
+	spin_unlock_irqrestore(&led->value_lock, flags);
+
+	wm831x_reg_write(led->wm831x, led->reg, led->reg_val);
+
+	mutex_unlock(&led->mutex);
+}
+
+static int wm831x_status_brightness_set(struct led_classdev *led_cdev,
+					 enum led_brightness value)
+{
+	struct wm831x_status *led = to_wm831x_status(led_cdev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&led->value_lock, flags);
+	led->brightness = value;
+	if (value == LED_OFF)
+		led->blink = 0;
+	spin_unlock_irqrestore(&led->value_lock, flags);
+	wm831x_status_set(led);
+
+	return 0;
+}
+
+static int wm831x_status_blink_set(struct led_classdev *led_cdev,
+				   unsigned long *delay_on,
+				   unsigned long *delay_off)
+{
+	struct wm831x_status *led = to_wm831x_status(led_cdev);
+	unsigned long flags;
+	int ret = 0;
+
+	/* Pick some defaults if we've not been given times */
+	if (*delay_on == 0 && *delay_off == 0) {
+		*delay_on = 250;
+		*delay_off = 250;
+	}
+
+	spin_lock_irqsave(&led->value_lock, flags);
+
+	/* We only have a limited selection of settings, see if we can
+	 * support the configuration we're being given */
+	switch (*delay_on) {
+	case 1000:
+		led->blink_time = 0;
+		break;
+	case 250:
+		led->blink_time = 1;
+		break;
+	case 125:
+		led->blink_time = 2;
+		break;
+	case 62:
+	case 63:
+		/* Actually 62.5ms */
+		led->blink_time = 3;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	if (ret == 0) {
+		switch (*delay_off / *delay_on) {
+		case 1:
+			led->blink_cyc = 0;
+			break;
+		case 3:
+			led->blink_cyc = 1;
+			break;
+		case 4:
+			led->blink_cyc = 2;
+			break;
+		case 8:
+			led->blink_cyc = 3;
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+		}
+	}
+
+	if (ret == 0)
+		led->blink = 1;
+	else
+		led->blink = 0;
+
+	spin_unlock_irqrestore(&led->value_lock, flags);
+	wm831x_status_set(led);
+
+	return ret;
+}
+
+static const char * const led_src_texts[] = {
+	"otp",
+	"power",
+	"charger",
+	"soft",
+};
+
+static ssize_t src_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct wm831x_status *led = to_wm831x_status(led_cdev);
+	int i;
+	ssize_t ret = 0;
+
+	mutex_lock(&led->mutex);
+
+	for (i = 0; i < ARRAY_SIZE(led_src_texts); i++)
+		if (i == led->src)
+			ret += sprintf(&buf[ret], "[%s] ", led_src_texts[i]);
+		else
+			ret += sprintf(&buf[ret], "%s ", led_src_texts[i]);
+
+	mutex_unlock(&led->mutex);
+
+	ret += sprintf(&buf[ret], "\n");
+
+	return ret;
+}
+
+static ssize_t src_store(struct device *dev,
+			 struct device_attribute *attr,
+			 const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct wm831x_status *led = to_wm831x_status(led_cdev);
+	int i;
+
+	i = sysfs_match_string(led_src_texts, buf);
+	if (i >= 0) {
+		mutex_lock(&led->mutex);
+		led->src = i;
+		mutex_unlock(&led->mutex);
+		wm831x_status_set(led);
+	}
+
+	return size;
+}
+
+static DEVICE_ATTR_RW(src);
+
+static struct attribute *wm831x_status_attrs[] = {
+	&dev_attr_src.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(wm831x_status);
+
+static int wm831x_status_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *chip_pdata;
+	struct wm831x_status_pdata pdata;
+	struct wm831x_status *drvdata;
+	struct resource *res;
+	int id = pdev->id % ARRAY_SIZE(chip_pdata->status);
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_REG, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "No register resource\n");
+		return -EINVAL;
+	}
+
+	drvdata = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_status),
+			       GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+
+	drvdata->wm831x = wm831x;
+	drvdata->reg = res->start;
+
+	if (dev_get_platdata(wm831x->dev))
+		chip_pdata = dev_get_platdata(wm831x->dev);
+	else
+		chip_pdata = NULL;
+
+	memset(&pdata, 0, sizeof(pdata));
+	if (chip_pdata && chip_pdata->status[id])
+		memcpy(&pdata, chip_pdata->status[id], sizeof(pdata));
+	else
+		pdata.name = dev_name(&pdev->dev);
+
+	mutex_init(&drvdata->mutex);
+	spin_lock_init(&drvdata->value_lock);
+
+	/* We cache the configuration register and read startup values
+	 * from it. */
+	drvdata->reg_val = wm831x_reg_read(wm831x, drvdata->reg);
+
+	if (drvdata->reg_val & WM831X_LED_MODE_MASK)
+		drvdata->brightness = LED_FULL;
+	else
+		drvdata->brightness = LED_OFF;
+
+	/* Set a default source if configured, otherwise leave the
+	 * current hardware setting.
+	 */
+	if (pdata.default_src == WM831X_STATUS_PRESERVE) {
+		drvdata->src = drvdata->reg_val;
+		drvdata->src &= WM831X_LED_SRC_MASK;
+		drvdata->src >>= WM831X_LED_SRC_SHIFT;
+	} else {
+		drvdata->src = pdata.default_src - 1;
+	}
+
+	drvdata->cdev.name = pdata.name;
+	drvdata->cdev.default_trigger = pdata.default_trigger;
+	drvdata->cdev.brightness_set_blocking = wm831x_status_brightness_set;
+	drvdata->cdev.blink_set = wm831x_status_blink_set;
+	drvdata->cdev.groups = wm831x_status_groups;
+
+	ret = led_classdev_register(wm831x->dev, &drvdata->cdev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to register LED: %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, drvdata);
+
+	return 0;
+}
+
+static int wm831x_status_remove(struct platform_device *pdev)
+{
+	struct wm831x_status *drvdata = platform_get_drvdata(pdev);
+
+	led_classdev_unregister(&drvdata->cdev);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_status_driver = {
+	.driver = {
+		   .name = "wm831x-status",
+		   },
+	.probe = wm831x_status_probe,
+	.remove = wm831x_status_remove,
+};
+
+module_platform_driver(wm831x_status_driver);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM831x status LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-status");