Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 350 insertions, 0 deletions

diff --git a/drivers/macintosh/windfarm_ad7417_sensor.c b/drivers/macintosh/windfarm_ad7417_sensor.c
new file mode 100644
index 000000000..33b4723d2
--- /dev/null
+++ b/drivers/macintosh/windfarm_ad7417_sensor.c
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Windfarm PowerMac thermal control. AD7417 sensors
+ *
+ * Copyright 2012 Benjamin Herrenschmidt, IBM Corp.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/wait.h>
+#include <linux/i2c.h>
+
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/sections.h>
+
+#include "windfarm.h"
+#include "windfarm_mpu.h"
+
+#define VERSION "1.0"
+
+struct wf_ad7417_priv {
+	struct kref		ref;
+	struct i2c_client	*i2c;
+	u8			config;
+	u8			cpu;
+	const struct mpu_data	*mpu;
+	struct wf_sensor	sensors[5];
+	struct mutex		lock;
+};
+
+static int wf_ad7417_temp_get(struct wf_sensor *sr, s32 *value)
+{
+	struct wf_ad7417_priv *pv = sr->priv;
+	u8 buf[2];
+	s16 raw;
+	int rc;
+
+	*value = 0;
+	mutex_lock(&pv->lock);
+
+	/* Read temp register */
+	buf[0] = 0;
+	rc = i2c_master_send(pv->i2c, buf, 1);
+	if (rc < 0)
+		goto error;
+	rc = i2c_master_recv(pv->i2c, buf, 2);
+	if (rc < 0)
+		goto error;
+
+	/* Read a a 16-bit signed value */
+	raw = be16_to_cpup((__le16 *)buf);
+
+	/* Convert 8.8-bit to 16.16 fixed point */
+	*value = ((s32)raw) << 8;
+
+	mutex_unlock(&pv->lock);
+	return 0;
+
+error:
+	mutex_unlock(&pv->lock);
+	return -1;
+}
+
+/*
+ * Scaling factors for the AD7417 ADC converters (except
+ * for the CPU diode which is obtained from the EEPROM).
+ * Those values are obtained from the property list of
+ * the darwin driver
+ */
+#define ADC_12V_CURRENT_SCALE	0x0320	/* _AD2 */
+#define ADC_CPU_VOLTAGE_SCALE	0x00a0	/* _AD3 */
+#define ADC_CPU_CURRENT_SCALE	0x1f40	/* _AD4 */
+
+static void wf_ad7417_adc_convert(struct wf_ad7417_priv *pv,
+				  int chan, s32 raw, s32 *value)
+{
+	switch(chan) {
+	case 1: /* Diode */
+		*value = (raw * (s32)pv->mpu->mdiode +
+			((s32)pv->mpu->bdiode << 12)) >> 2;
+		break;
+	case 2: /* 12v current */
+		*value = raw * ADC_12V_CURRENT_SCALE;
+		break;
+	case 3: /* core voltage */
+		*value = raw * ADC_CPU_VOLTAGE_SCALE;
+		break;
+	case 4: /* core current */
+		*value = raw * ADC_CPU_CURRENT_SCALE;
+		break;
+	}
+}
+
+static int wf_ad7417_adc_get(struct wf_sensor *sr, s32 *value)
+{
+	struct wf_ad7417_priv *pv = sr->priv;
+	int chan = sr - pv->sensors;
+	int i, rc;
+	u8 buf[2];
+	u16 raw;
+
+	*value = 0;
+	mutex_lock(&pv->lock);
+	for (i = 0; i < 10; i++) {
+		/* Set channel */
+		buf[0] = 1;
+		buf[1] = (pv->config & 0x1f) | (chan << 5);
+		rc = i2c_master_send(pv->i2c, buf, 2);
+		if (rc < 0)
+			goto error;
+
+		/* Wait for conversion */
+		msleep(1);
+
+		/* Switch to data register */
+		buf[0] = 4;
+		rc = i2c_master_send(pv->i2c, buf, 1);
+		if (rc < 0)
+			goto error;
+
+		/* Read result */
+		rc = i2c_master_recv(pv->i2c, buf, 2);
+		if (rc < 0)
+			goto error;
+
+		/* Read a a 16-bit signed value */
+		raw = be16_to_cpup((__le16 *)buf) >> 6;
+		wf_ad7417_adc_convert(pv, chan, raw, value);
+
+		dev_vdbg(&pv->i2c->dev, "ADC chan %d [%s]"
+			 " raw value: 0x%x, conv to: 0x%08x\n",
+			 chan, sr->name, raw, *value);
+
+		mutex_unlock(&pv->lock);
+		return 0;
+
+	error:
+		dev_dbg(&pv->i2c->dev,
+			  "Error reading ADC, try %d...\n", i);
+		if (i < 9)
+			msleep(10);
+	}
+	mutex_unlock(&pv->lock);
+	return -1;
+}
+
+static void wf_ad7417_release(struct kref *ref)
+{
+	struct wf_ad7417_priv *pv = container_of(ref,
+						 struct wf_ad7417_priv, ref);
+	kfree(pv);
+}
+
+static void wf_ad7417_sensor_release(struct wf_sensor *sr)
+{
+	struct wf_ad7417_priv *pv = sr->priv;
+
+	kfree(sr->name);
+	kref_put(&pv->ref, wf_ad7417_release);
+}
+
+static const struct wf_sensor_ops wf_ad7417_temp_ops = {
+	.get_value	= wf_ad7417_temp_get,
+	.release	= wf_ad7417_sensor_release,
+	.owner		= THIS_MODULE,
+};
+
+static const struct wf_sensor_ops wf_ad7417_adc_ops = {
+	.get_value	= wf_ad7417_adc_get,
+	.release	= wf_ad7417_sensor_release,
+	.owner		= THIS_MODULE,
+};
+
+static void wf_ad7417_add_sensor(struct wf_ad7417_priv *pv,
+				 int index, const char *name,
+				 const struct wf_sensor_ops *ops)
+{
+	pv->sensors[index].name = kasprintf(GFP_KERNEL, "%s-%d", name, pv->cpu);
+	pv->sensors[index].priv = pv;
+	pv->sensors[index].ops = ops;
+	if (!wf_register_sensor(&pv->sensors[index]))
+		kref_get(&pv->ref);
+}
+
+static void wf_ad7417_init_chip(struct wf_ad7417_priv *pv)
+{
+	int rc;
+	u8 buf[2];
+	u8 config = 0;
+
+	/*
+	 * Read ADC the configuration register and cache it. We
+	 * also make sure Config2 contains proper values, I've seen
+	 * cases where we got stale grabage in there, thus preventing
+	 * proper reading of conv. values
+	 */
+
+	/* Clear Config2 */
+	buf[0] = 5;
+	buf[1] = 0;
+	i2c_master_send(pv->i2c, buf, 2);
+
+	/* Read & cache Config1 */
+	buf[0] = 1;
+	rc = i2c_master_send(pv->i2c, buf, 1);
+	if (rc > 0) {
+		rc = i2c_master_recv(pv->i2c, buf, 1);
+		if (rc > 0) {
+			config = buf[0];
+
+			dev_dbg(&pv->i2c->dev, "ADC config reg: %02x\n",
+				config);
+
+			/* Disable shutdown mode */
+			config &= 0xfe;
+			buf[0] = 1;
+			buf[1] = config;
+			rc = i2c_master_send(pv->i2c, buf, 2);
+		}
+	}
+	if (rc <= 0)
+		dev_err(&pv->i2c->dev, "Error reading ADC config\n");
+
+	pv->config = config;
+}
+
+static int wf_ad7417_probe(struct i2c_client *client)
+{
+	struct wf_ad7417_priv *pv;
+	const struct mpu_data *mpu;
+	const char *loc;
+	int cpu_nr;
+
+	loc = of_get_property(client->dev.of_node, "hwsensor-location", NULL);
+	if (!loc) {
+		dev_warn(&client->dev, "Missing hwsensor-location property!\n");
+		return -ENXIO;
+	}
+
+	/*
+	 * Identify which CPU we belong to by looking at the first entry
+	 * in the hwsensor-location list
+	 */
+	if (!strncmp(loc, "CPU A", 5))
+		cpu_nr = 0;
+	else if (!strncmp(loc, "CPU B", 5))
+		cpu_nr = 1;
+	else {
+		pr_err("wf_ad7417: Can't identify location %s\n", loc);
+		return -ENXIO;
+	}
+	mpu = wf_get_mpu(cpu_nr);
+	if (!mpu) {
+		dev_err(&client->dev, "Failed to retrieve MPU data\n");
+		return -ENXIO;
+	}
+
+	pv = kzalloc(sizeof(struct wf_ad7417_priv), GFP_KERNEL);
+	if (pv == NULL)
+		return -ENODEV;
+
+	kref_init(&pv->ref);
+	mutex_init(&pv->lock);
+	pv->i2c = client;
+	pv->cpu = cpu_nr;
+	pv->mpu = mpu;
+	dev_set_drvdata(&client->dev, pv);
+
+	/* Initialize the chip */
+	wf_ad7417_init_chip(pv);
+
+	/*
+	 * We cannot rely on Apple device-tree giving us child
+	 * node with the names of the individual sensors so we
+	 * just hard code what we know about them
+	 */
+	wf_ad7417_add_sensor(pv, 0, "cpu-amb-temp", &wf_ad7417_temp_ops);
+	wf_ad7417_add_sensor(pv, 1, "cpu-diode-temp", &wf_ad7417_adc_ops);
+	wf_ad7417_add_sensor(pv, 2, "cpu-12v-current", &wf_ad7417_adc_ops);
+	wf_ad7417_add_sensor(pv, 3, "cpu-voltage", &wf_ad7417_adc_ops);
+	wf_ad7417_add_sensor(pv, 4, "cpu-current", &wf_ad7417_adc_ops);
+
+	return 0;
+}
+
+static void wf_ad7417_remove(struct i2c_client *client)
+{
+	struct wf_ad7417_priv *pv = dev_get_drvdata(&client->dev);
+	int i;
+
+	/* Mark client detached */
+	pv->i2c = NULL;
+
+	/* Release sensor */
+	for (i = 0; i < 5; i++)
+		wf_unregister_sensor(&pv->sensors[i]);
+
+	kref_put(&pv->ref, wf_ad7417_release);
+}
+
+static const struct i2c_device_id wf_ad7417_id[] = {
+	{ "MAC,ad7417", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wf_ad7417_id);
+
+static const struct of_device_id wf_ad7417_of_id[] = {
+	{ .compatible = "ad7417", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, wf_ad7417_of_id);
+
+static struct i2c_driver wf_ad7417_driver = {
+	.driver = {
+		.name	= "wf_ad7417",
+		.of_match_table = wf_ad7417_of_id,
+	},
+	.probe_new	= wf_ad7417_probe,
+	.remove		= wf_ad7417_remove,
+	.id_table	= wf_ad7417_id,
+};
+
+static int wf_ad7417_init(void)
+{
+	/* This is only supported on these machines */
+	if (!of_machine_is_compatible("PowerMac7,2") &&
+	    !of_machine_is_compatible("PowerMac7,3") &&
+	    !of_machine_is_compatible("RackMac3,1"))
+		return -ENODEV;
+
+	return i2c_add_driver(&wf_ad7417_driver);
+}
+
+static void wf_ad7417_exit(void)
+{
+	i2c_del_driver(&wf_ad7417_driver);
+}
+
+module_init(wf_ad7417_init);
+module_exit(wf_ad7417_exit);
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("ad7417 sensor driver for PowerMacs");
+MODULE_LICENSE("GPL");
+