Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 282 insertions, 0 deletions

diff --git a/drivers/md/md-autodetect.c b/drivers/md/md-autodetect.c
new file mode 100644
index 000000000..91836e6de
--- /dev/null
+++ b/drivers/md/md-autodetect.c
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/kernel.h>
+#include <linux/blkdev.h>
+#include <linux/init.h>
+#include <linux/mount.h>
+#include <linux/major.h>
+#include <linux/delay.h>
+#include <linux/init_syscalls.h>
+#include <linux/raid/detect.h>
+#include <linux/raid/md_u.h>
+#include <linux/raid/md_p.h>
+#include "md.h"
+
+/*
+ * When md (and any require personalities) are compiled into the kernel
+ * (not a module), arrays can be assembles are boot time using with AUTODETECT
+ * where specially marked partitions are registered with md_autodetect_dev(),
+ * and with MD_BOOT where devices to be collected are given on the boot line
+ * with md=.....
+ * The code for that is here.
+ */
+
+#ifdef CONFIG_MD_AUTODETECT
+static int __initdata raid_noautodetect;
+#else
+static int __initdata raid_noautodetect=1;
+#endif
+static int __initdata raid_autopart;
+
+static struct md_setup_args {
+	int minor;
+	int partitioned;
+	int level;
+	int chunk;
+	char *device_names;
+} md_setup_args[256] __initdata;
+
+static int md_setup_ents __initdata;
+
+/*
+ * Parse the command-line parameters given our kernel, but do not
+ * actually try to invoke the MD device now; that is handled by
+ * md_setup_drive after the low-level disk drivers have initialised.
+ *
+ * 27/11/1999: Fixed to work correctly with the 2.3 kernel (which
+ *             assigns the task of parsing integer arguments to the
+ *             invoked program now).  Added ability to initialise all
+ *             the MD devices (by specifying multiple "md=" lines)
+ *             instead of just one.  -- KTK
+ * 18May2000: Added support for persistent-superblock arrays:
+ *             md=n,0,factor,fault,device-list   uses RAID0 for device n
+ *             md=n,-1,factor,fault,device-list  uses LINEAR for device n
+ *             md=n,device-list      reads a RAID superblock from the devices
+ *             elements in device-list are read by name_to_kdev_t so can be
+ *             a hex number or something like /dev/hda1 /dev/sdb
+ * 2001-06-03: Dave Cinege <dcinege@psychosis.com>
+ *		Shifted name_to_kdev_t() and related operations to md_set_drive()
+ *		for later execution. Rewrote section to make devfs compatible.
+ */
+static int __init md_setup(char *str)
+{
+	int minor, level, factor, fault, partitioned = 0;
+	char *pername = "";
+	char *str1;
+	int ent;
+
+	if (*str == 'd') {
+		partitioned = 1;
+		str++;
+	}
+	if (get_option(&str, &minor) != 2) {	/* MD Number */
+		printk(KERN_WARNING "md: Too few arguments supplied to md=.\n");
+		return 0;
+	}
+	str1 = str;
+	for (ent=0 ; ent< md_setup_ents ; ent++)
+		if (md_setup_args[ent].minor == minor &&
+		    md_setup_args[ent].partitioned == partitioned) {
+			printk(KERN_WARNING "md: md=%s%d, Specified more than once. "
+			       "Replacing previous definition.\n", partitioned?"d":"", minor);
+			break;
+		}
+	if (ent >= ARRAY_SIZE(md_setup_args)) {
+		printk(KERN_WARNING "md: md=%s%d - too many md initialisations\n", partitioned?"d":"", minor);
+		return 0;
+	}
+	if (ent >= md_setup_ents)
+		md_setup_ents++;
+	switch (get_option(&str, &level)) {	/* RAID level */
+	case 2: /* could be 0 or -1.. */
+		if (level == 0 || level == LEVEL_LINEAR) {
+			if (get_option(&str, &factor) != 2 ||	/* Chunk Size */
+					get_option(&str, &fault) != 2) {
+				printk(KERN_WARNING "md: Too few arguments supplied to md=.\n");
+				return 0;
+			}
+			md_setup_args[ent].level = level;
+			md_setup_args[ent].chunk = 1 << (factor+12);
+			if (level ==  LEVEL_LINEAR)
+				pername = "linear";
+			else
+				pername = "raid0";
+			break;
+		}
+		fallthrough;
+	case 1: /* the first device is numeric */
+		str = str1;
+		fallthrough;
+	case 0:
+		md_setup_args[ent].level = LEVEL_NONE;
+		pername="super-block";
+	}
+
+	printk(KERN_INFO "md: Will configure md%d (%s) from %s, below.\n",
+		minor, pername, str);
+	md_setup_args[ent].device_names = str;
+	md_setup_args[ent].partitioned = partitioned;
+	md_setup_args[ent].minor = minor;
+
+	return 1;
+}
+
+static void __init md_setup_drive(struct md_setup_args *args)
+{
+	char *devname = args->device_names;
+	dev_t devices[MD_SB_DISKS + 1], mdev;
+	struct mdu_array_info_s ainfo = { };
+	struct mddev *mddev;
+	int err = 0, i;
+	char name[16];
+
+	if (args->partitioned) {
+		mdev = MKDEV(mdp_major, args->minor << MdpMinorShift);
+		sprintf(name, "md_d%d", args->minor);
+	} else {
+		mdev = MKDEV(MD_MAJOR, args->minor);
+		sprintf(name, "md%d", args->minor);
+	}
+
+	for (i = 0; i < MD_SB_DISKS && devname != NULL; i++) {
+		struct kstat stat;
+		char *p;
+		char comp_name[64];
+		dev_t dev;
+
+		p = strchr(devname, ',');
+		if (p)
+			*p++ = 0;
+
+		dev = name_to_dev_t(devname);
+		if (strncmp(devname, "/dev/", 5) == 0)
+			devname += 5;
+		snprintf(comp_name, 63, "/dev/%s", devname);
+		if (init_stat(comp_name, &stat, 0) == 0 && S_ISBLK(stat.mode))
+			dev = new_decode_dev(stat.rdev);
+		if (!dev) {
+			pr_warn("md: Unknown device name: %s\n", devname);
+			break;
+		}
+
+		devices[i] = dev;
+		devname = p;
+	}
+	devices[i] = 0;
+
+	if (!i)
+		return;
+
+	pr_info("md: Loading %s: %s\n", name, args->device_names);
+
+	mddev = md_alloc(mdev, name);
+	if (IS_ERR(mddev)) {
+		pr_err("md: md_alloc failed - cannot start array %s\n", name);
+		return;
+	}
+
+	err = mddev_lock(mddev);
+	if (err) {
+		pr_err("md: failed to lock array %s\n", name);
+		goto out_mddev_put;
+	}
+
+	if (!list_empty(&mddev->disks) || mddev->raid_disks) {
+		pr_warn("md: Ignoring %s, already autodetected. (Use raid=noautodetect)\n",
+		       name);
+		goto out_unlock;
+	}
+
+	if (args->level != LEVEL_NONE) {
+		/* non-persistent */
+		ainfo.level = args->level;
+		ainfo.md_minor = args->minor;
+		ainfo.not_persistent = 1;
+		ainfo.state = (1 << MD_SB_CLEAN);
+		ainfo.chunk_size = args->chunk;
+		while (devices[ainfo.raid_disks])
+			ainfo.raid_disks++;
+	}
+
+	err = md_set_array_info(mddev, &ainfo);
+
+	for (i = 0; i <= MD_SB_DISKS && devices[i]; i++) {
+		struct mdu_disk_info_s dinfo = {
+			.major	= MAJOR(devices[i]),
+			.minor	= MINOR(devices[i]),
+		};
+
+		if (args->level != LEVEL_NONE) {
+			dinfo.number = i;
+			dinfo.raid_disk = i;
+			dinfo.state =
+				(1 << MD_DISK_ACTIVE) | (1 << MD_DISK_SYNC);
+		}
+
+		md_add_new_disk(mddev, &dinfo);
+	}
+
+	if (!err)
+		err = do_md_run(mddev);
+	if (err)
+		pr_warn("md: starting %s failed\n", name);
+out_unlock:
+	mddev_unlock(mddev);
+out_mddev_put:
+	mddev_put(mddev);
+}
+
+static int __init raid_setup(char *str)
+{
+	int len, pos;
+
+	len = strlen(str) + 1;
+	pos = 0;
+
+	while (pos < len) {
+		char *comma = strchr(str+pos, ',');
+		int wlen;
+		if (comma)
+			wlen = (comma-str)-pos;
+		else	wlen = (len-1)-pos;
+
+		if (!strncmp(str, "noautodetect", wlen))
+			raid_noautodetect = 1;
+		if (!strncmp(str, "autodetect", wlen))
+			raid_noautodetect = 0;
+		if (strncmp(str, "partitionable", wlen)==0)
+			raid_autopart = 1;
+		if (strncmp(str, "part", wlen)==0)
+			raid_autopart = 1;
+		pos += wlen+1;
+	}
+	return 1;
+}
+
+__setup("raid=", raid_setup);
+__setup("md=", md_setup);
+
+static void __init autodetect_raid(void)
+{
+	/*
+	 * Since we don't want to detect and use half a raid array, we need to
+	 * wait for the known devices to complete their probing
+	 */
+	printk(KERN_INFO "md: Waiting for all devices to be available before autodetect\n");
+	printk(KERN_INFO "md: If you don't use raid, use raid=noautodetect\n");
+
+	wait_for_device_probe();
+	md_autostart_arrays(raid_autopart);
+}
+
+void __init md_run_setup(void)
+{
+	int ent;
+
+	if (raid_noautodetect)
+		printk(KERN_INFO "md: Skipping autodetection of RAID arrays. (raid=autodetect will force)\n");
+	else
+		autodetect_raid();
+
+	for (ent = 0; ent < md_setup_ents; ent++)
+		md_setup_drive(&md_setup_args[ent]);
+}