Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 790 insertions, 0 deletions

diff --git a/drivers/media/cec/platform/seco/seco-cec.c b/drivers/media/cec/platform/seco/seco-cec.c
new file mode 100644
index 000000000..580905e3d
--- /dev/null
+++ b/drivers/media/cec/platform/seco/seco-cec.c
@@ -0,0 +1,790 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * CEC driver for SECO X86 Boards
+ *
+ * Author:  Ettore Chimenti <ek5.chimenti@gmail.com>
+ * Copyright (C) 2018, SECO SpA.
+ * Copyright (C) 2018, Aidilab Srl.
+ */
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/dmi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+/* CEC Framework */
+#include <media/cec-notifier.h>
+
+#include "seco-cec.h"
+
+struct secocec_data {
+	struct device *dev;
+	struct platform_device *pdev;
+	struct cec_adapter *cec_adap;
+	struct cec_notifier *notifier;
+	struct rc_dev *ir;
+	char ir_input_phys[32];
+	int irq;
+};
+
+#define smb_wr16(cmd, data) smb_word_op(SECOCEC_MICRO_ADDRESS, \
+					cmd, data, SMBUS_WRITE, NULL)
+#define smb_rd16(cmd, res) smb_word_op(SECOCEC_MICRO_ADDRESS, \
+				       cmd, 0, SMBUS_READ, res)
+
+static int smb_word_op(u16 slave_addr, u8 cmd, u16 data,
+		       u8 operation, u16 *result)
+{
+	unsigned int count;
+	int status = 0;
+
+	/* Active wait until ready */
+	for (count = 0; count <= SMBTIMEOUT; ++count) {
+		if (!(inb(HSTS) & BRA_INUSE_STS))
+			break;
+		udelay(SMB_POLL_UDELAY);
+	}
+
+	if (count > SMBTIMEOUT)
+		/* Reset the lock instead of failing */
+		outb(0xff, HSTS);
+
+	outb(0x00, HCNT);
+	outb((u8)(slave_addr & 0xfe) | operation, XMIT_SLVA);
+	outb(cmd, HCMD);
+	inb(HCNT);
+
+	if (operation == SMBUS_WRITE) {
+		outb((u8)data, HDAT0);
+		outb((u8)(data >> 8), HDAT1);
+	}
+
+	outb(BRA_START + BRA_SMB_CMD_WORD_DATA, HCNT);
+
+	for (count = 0; count <= SMBTIMEOUT; count++) {
+		if (!(inb(HSTS) & BRA_HOST_BUSY))
+			break;
+		udelay(SMB_POLL_UDELAY);
+	}
+
+	if (count > SMBTIMEOUT) {
+		status = -EBUSY;
+		goto err;
+	}
+
+	if (inb(HSTS) & BRA_HSTS_ERR_MASK) {
+		status = -EIO;
+		goto err;
+	}
+
+	if (operation == SMBUS_READ)
+		*result = ((inb(HDAT0) & 0xff) + ((inb(HDAT1) & 0xff) << 8));
+
+err:
+	outb(0xff, HSTS);
+	return status;
+}
+
+static int secocec_adap_enable(struct cec_adapter *adap, bool enable)
+{
+	struct secocec_data *cec = cec_get_drvdata(adap);
+	struct device *dev = cec->dev;
+	u16 val = 0;
+	int status;
+
+	if (enable) {
+		/* Clear the status register */
+		status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
+		if (status)
+			goto err;
+
+		status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+		if (status)
+			goto err;
+
+		/* Enable the interrupts */
+		status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+		if (status)
+			goto err;
+
+		status = smb_wr16(SECOCEC_ENABLE_REG_1,
+				  val | SECOCEC_ENABLE_REG_1_CEC);
+		if (status)
+			goto err;
+
+		dev_dbg(dev, "Device enabled\n");
+	} else {
+		/* Clear the status register */
+		status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
+		status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+
+		/* Disable the interrupts */
+		status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+		status = smb_wr16(SECOCEC_ENABLE_REG_1, val &
+				  ~SECOCEC_ENABLE_REG_1_CEC &
+				  ~SECOCEC_ENABLE_REG_1_IR);
+
+		dev_dbg(dev, "Device disabled\n");
+	}
+
+	return 0;
+err:
+	return status;
+}
+
+static int secocec_adap_log_addr(struct cec_adapter *adap, u8 logical_addr)
+{
+	u16 enable_val = 0;
+	int status;
+
+	/* Disable device */
+	status = smb_rd16(SECOCEC_ENABLE_REG_1, &enable_val);
+	if (status)
+		return status;
+
+	status = smb_wr16(SECOCEC_ENABLE_REG_1,
+			  enable_val & ~SECOCEC_ENABLE_REG_1_CEC);
+	if (status)
+		return status;
+
+	/* Write logical address
+	 * NOTE: CEC_LOG_ADDR_INVALID is mapped to the 'Unregistered' LA
+	 */
+	status = smb_wr16(SECOCEC_DEVICE_LA, logical_addr & 0xf);
+	if (status)
+		return status;
+
+	/* Re-enable device */
+	status = smb_wr16(SECOCEC_ENABLE_REG_1,
+			  enable_val | SECOCEC_ENABLE_REG_1_CEC);
+	if (status)
+		return status;
+
+	return 0;
+}
+
+static int secocec_adap_transmit(struct cec_adapter *adap, u8 attempts,
+				 u32 signal_free_time, struct cec_msg *msg)
+{
+	u16 payload_len, payload_id_len, destination, val = 0;
+	u8 *payload_msg;
+	int status;
+	u8 i;
+
+	/* Device msg len already accounts for header */
+	payload_id_len = msg->len - 1;
+
+	/* Send data length */
+	status = smb_wr16(SECOCEC_WRITE_DATA_LENGTH, payload_id_len);
+	if (status)
+		goto err;
+
+	/* Send Operation ID if present */
+	if (payload_id_len > 0) {
+		status = smb_wr16(SECOCEC_WRITE_OPERATION_ID, msg->msg[1]);
+		if (status)
+			goto err;
+	}
+	/* Send data if present */
+	if (payload_id_len > 1) {
+		/* Only data; */
+		payload_len = msg->len - 2;
+		payload_msg = &msg->msg[2];
+
+		/* Copy message into registers */
+		for (i = 0; i < payload_len; i += 2) {
+			/* hi byte */
+			val = payload_msg[i + 1] << 8;
+
+			/* lo byte */
+			val |= payload_msg[i];
+
+			status = smb_wr16(SECOCEC_WRITE_DATA_00 + i / 2, val);
+			if (status)
+				goto err;
+		}
+	}
+	/* Send msg source/destination and fire msg */
+	destination = msg->msg[0];
+	status = smb_wr16(SECOCEC_WRITE_BYTE0, destination);
+	if (status)
+		goto err;
+
+	return 0;
+
+err:
+	return status;
+}
+
+static void secocec_tx_done(struct cec_adapter *adap, u16 status_val)
+{
+	if (status_val & SECOCEC_STATUS_TX_ERROR_MASK) {
+		if (status_val & SECOCEC_STATUS_TX_NACK_ERROR)
+			cec_transmit_attempt_done(adap, CEC_TX_STATUS_NACK);
+		else
+			cec_transmit_attempt_done(adap, CEC_TX_STATUS_ERROR);
+	} else {
+		cec_transmit_attempt_done(adap, CEC_TX_STATUS_OK);
+	}
+
+	/* Reset status reg */
+	status_val = SECOCEC_STATUS_TX_ERROR_MASK |
+		SECOCEC_STATUS_MSG_SENT_MASK |
+		SECOCEC_STATUS_TX_NACK_ERROR;
+	smb_wr16(SECOCEC_STATUS, status_val);
+}
+
+static void secocec_rx_done(struct cec_adapter *adap, u16 status_val)
+{
+	struct secocec_data *cec = cec_get_drvdata(adap);
+	struct device *dev = cec->dev;
+	struct cec_msg msg = { };
+	bool flag_overflow = false;
+	u8 payload_len, i = 0;
+	u8 *payload_msg;
+	u16 val = 0;
+	int status;
+
+	if (status_val & SECOCEC_STATUS_RX_OVERFLOW_MASK) {
+		/* NOTE: Untested, it also might not be necessary */
+		dev_warn(dev, "Received more than 16 bytes. Discarding\n");
+		flag_overflow = true;
+	}
+
+	if (status_val & SECOCEC_STATUS_RX_ERROR_MASK) {
+		dev_warn(dev, "Message received with errors. Discarding\n");
+		status = -EIO;
+		goto rxerr;
+	}
+
+	/* Read message length */
+	status = smb_rd16(SECOCEC_READ_DATA_LENGTH, &val);
+	if (status)
+		return;
+
+	/* Device msg len already accounts for the header */
+	msg.len = min(val + 1, CEC_MAX_MSG_SIZE);
+
+	/* Read logical address */
+	status = smb_rd16(SECOCEC_READ_BYTE0, &val);
+	if (status)
+		return;
+
+	/* device stores source LA and destination */
+	msg.msg[0] = val;
+
+	/* Read operation ID */
+	status = smb_rd16(SECOCEC_READ_OPERATION_ID, &val);
+	if (status)
+		return;
+
+	msg.msg[1] = val;
+
+	/* Read data if present */
+	if (msg.len > 1) {
+		payload_len = msg.len - 2;
+		payload_msg = &msg.msg[2];
+
+		/* device stores 2 bytes in every 16-bit val */
+		for (i = 0; i < payload_len; i += 2) {
+			status = smb_rd16(SECOCEC_READ_DATA_00 + i / 2, &val);
+			if (status)
+				return;
+
+			/* low byte, skipping header */
+			payload_msg[i] = val & 0x00ff;
+
+			/* hi byte */
+			payload_msg[i + 1] = (val & 0xff00) >> 8;
+		}
+	}
+
+	cec_received_msg(cec->cec_adap, &msg);
+
+	/* Reset status reg */
+	status_val = SECOCEC_STATUS_MSG_RECEIVED_MASK;
+	if (flag_overflow)
+		status_val |= SECOCEC_STATUS_RX_OVERFLOW_MASK;
+
+	status = smb_wr16(SECOCEC_STATUS, status_val);
+
+	return;
+
+rxerr:
+	/* Reset error reg */
+	status_val = SECOCEC_STATUS_MSG_RECEIVED_MASK |
+		SECOCEC_STATUS_RX_ERROR_MASK;
+	if (flag_overflow)
+		status_val |= SECOCEC_STATUS_RX_OVERFLOW_MASK;
+	smb_wr16(SECOCEC_STATUS, status_val);
+}
+
+static const struct cec_adap_ops secocec_cec_adap_ops = {
+	/* Low-level callbacks */
+	.adap_enable = secocec_adap_enable,
+	.adap_log_addr = secocec_adap_log_addr,
+	.adap_transmit = secocec_adap_transmit,
+};
+
+#ifdef CONFIG_CEC_SECO_RC
+static int secocec_ir_probe(void *priv)
+{
+	struct secocec_data *cec = priv;
+	struct device *dev = cec->dev;
+	int status;
+	u16 val;
+
+	/* Prepare the RC input device */
+	cec->ir = devm_rc_allocate_device(dev, RC_DRIVER_SCANCODE);
+	if (!cec->ir)
+		return -ENOMEM;
+
+	snprintf(cec->ir_input_phys, sizeof(cec->ir_input_phys),
+		 "%s/input0", dev_name(dev));
+
+	cec->ir->device_name = dev_name(dev);
+	cec->ir->input_phys = cec->ir_input_phys;
+	cec->ir->input_id.bustype = BUS_HOST;
+	cec->ir->input_id.vendor = 0;
+	cec->ir->input_id.product = 0;
+	cec->ir->input_id.version = 1;
+	cec->ir->driver_name = SECOCEC_DEV_NAME;
+	cec->ir->allowed_protocols = RC_PROTO_BIT_RC5;
+	cec->ir->priv = cec;
+	cec->ir->map_name = RC_MAP_HAUPPAUGE;
+	cec->ir->timeout = MS_TO_US(100);
+
+	/* Clear the status register */
+	status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
+	if (status != 0)
+		goto err;
+
+	status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+	if (status != 0)
+		goto err;
+
+	/* Enable the interrupts */
+	status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+	if (status != 0)
+		goto err;
+
+	status = smb_wr16(SECOCEC_ENABLE_REG_1,
+			  val | SECOCEC_ENABLE_REG_1_IR);
+	if (status != 0)
+		goto err;
+
+	dev_dbg(dev, "IR enabled\n");
+
+	status = devm_rc_register_device(dev, cec->ir);
+
+	if (status) {
+		dev_err(dev, "Failed to prepare input device\n");
+		cec->ir = NULL;
+		goto err;
+	}
+
+	return 0;
+
+err:
+	smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+
+	smb_wr16(SECOCEC_ENABLE_REG_1,
+		 val & ~SECOCEC_ENABLE_REG_1_IR);
+
+	dev_dbg(dev, "IR disabled\n");
+	return status;
+}
+
+static int secocec_ir_rx(struct secocec_data *priv)
+{
+	struct secocec_data *cec = priv;
+	struct device *dev = cec->dev;
+	u16 val, status, key, addr, toggle;
+
+	if (!cec->ir)
+		return -ENODEV;
+
+	status = smb_rd16(SECOCEC_IR_READ_DATA, &val);
+	if (status != 0)
+		goto err;
+
+	key = val & SECOCEC_IR_COMMAND_MASK;
+	addr = (val & SECOCEC_IR_ADDRESS_MASK) >> SECOCEC_IR_ADDRESS_SHL;
+	toggle = (val & SECOCEC_IR_TOGGLE_MASK) >> SECOCEC_IR_TOGGLE_SHL;
+
+	rc_keydown(cec->ir, RC_PROTO_RC5, RC_SCANCODE_RC5(addr, key), toggle);
+
+	dev_dbg(dev, "IR key pressed: 0x%02x addr 0x%02x toggle 0x%02x\n", key,
+		addr, toggle);
+
+	return 0;
+
+err:
+	dev_err(dev, "IR Receive message failed (%d)\n", status);
+	return -EIO;
+}
+#else
+static void secocec_ir_rx(struct secocec_data *priv)
+{
+}
+
+static int secocec_ir_probe(void *priv)
+{
+	return 0;
+}
+#endif
+
+static irqreturn_t secocec_irq_handler(int irq, void *priv)
+{
+	struct secocec_data *cec = priv;
+	struct device *dev = cec->dev;
+	u16 status_val, cec_val, val = 0;
+	int status;
+
+	/*  Read status register */
+	status = smb_rd16(SECOCEC_STATUS_REG_1, &status_val);
+	if (status)
+		goto err;
+
+	if (status_val & SECOCEC_STATUS_REG_1_CEC) {
+		/* Read CEC status register */
+		status = smb_rd16(SECOCEC_STATUS, &cec_val);
+		if (status)
+			goto err;
+
+		if (cec_val & SECOCEC_STATUS_MSG_RECEIVED_MASK)
+			secocec_rx_done(cec->cec_adap, cec_val);
+
+		if (cec_val & SECOCEC_STATUS_MSG_SENT_MASK)
+			secocec_tx_done(cec->cec_adap, cec_val);
+
+		if ((~cec_val & SECOCEC_STATUS_MSG_SENT_MASK) &&
+		    (~cec_val & SECOCEC_STATUS_MSG_RECEIVED_MASK))
+			dev_warn_once(dev,
+				      "Message not received or sent, but interrupt fired");
+
+		val = SECOCEC_STATUS_REG_1_CEC;
+	}
+
+	if (status_val & SECOCEC_STATUS_REG_1_IR) {
+		val |= SECOCEC_STATUS_REG_1_IR;
+
+		secocec_ir_rx(cec);
+	}
+
+	/*  Reset status register */
+	status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+	if (status)
+		goto err;
+
+	return IRQ_HANDLED;
+
+err:
+	dev_err_once(dev, "IRQ: R/W SMBus operation failed %d\n", status);
+
+	/*  Reset status register */
+	val = SECOCEC_STATUS_REG_1_CEC | SECOCEC_STATUS_REG_1_IR;
+	smb_wr16(SECOCEC_STATUS_REG_1, val);
+
+	return IRQ_HANDLED;
+}
+
+struct cec_dmi_match {
+	const char *sys_vendor;
+	const char *product_name;
+	const char *devname;
+	const char *conn;
+};
+
+static const struct cec_dmi_match secocec_dmi_match_table[] = {
+	/* UDOO X86 */
+	{ "SECO", "UDOO x86", "0000:00:02.0", "Port B" },
+};
+
+static struct device *secocec_cec_find_hdmi_dev(struct device *dev,
+						const char **conn)
+{
+	int i;
+
+	for (i = 0 ; i < ARRAY_SIZE(secocec_dmi_match_table) ; ++i) {
+		const struct cec_dmi_match *m = &secocec_dmi_match_table[i];
+
+		if (dmi_match(DMI_SYS_VENDOR, m->sys_vendor) &&
+		    dmi_match(DMI_PRODUCT_NAME, m->product_name)) {
+			struct device *d;
+
+			/* Find the device, bail out if not yet registered */
+			d = bus_find_device_by_name(&pci_bus_type, NULL,
+						    m->devname);
+			if (!d)
+				return ERR_PTR(-EPROBE_DEFER);
+
+			put_device(d);
+			*conn = m->conn;
+			return d;
+		}
+	}
+
+	return ERR_PTR(-EINVAL);
+}
+
+static int secocec_acpi_probe(struct secocec_data *sdev)
+{
+	struct device *dev = sdev->dev;
+	struct gpio_desc *gpio;
+	int irq = 0;
+
+	gpio = devm_gpiod_get(dev, NULL, GPIOD_IN);
+	if (IS_ERR(gpio)) {
+		dev_err(dev, "Cannot request interrupt gpio\n");
+		return PTR_ERR(gpio);
+	}
+
+	irq = gpiod_to_irq(gpio);
+	if (irq < 0) {
+		dev_err(dev, "Cannot find valid irq\n");
+		return -ENODEV;
+	}
+	dev_dbg(dev, "irq-gpio is bound to IRQ %d\n", irq);
+
+	sdev->irq = irq;
+
+	return 0;
+}
+
+static int secocec_probe(struct platform_device *pdev)
+{
+	struct secocec_data *secocec;
+	struct device *dev = &pdev->dev;
+	struct device *hdmi_dev;
+	const char *conn = NULL;
+	int ret;
+	u16 val;
+
+	hdmi_dev = secocec_cec_find_hdmi_dev(&pdev->dev, &conn);
+	if (IS_ERR(hdmi_dev))
+		return PTR_ERR(hdmi_dev);
+
+	secocec = devm_kzalloc(dev, sizeof(*secocec), GFP_KERNEL);
+	if (!secocec)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, secocec);
+
+	/* Request SMBus regions */
+	if (!request_muxed_region(BRA_SMB_BASE_ADDR, 7, "CEC00001")) {
+		dev_err(dev, "Request memory region failed\n");
+		return -ENXIO;
+	}
+
+	secocec->pdev = pdev;
+	secocec->dev = dev;
+
+	if (!has_acpi_companion(dev)) {
+		dev_dbg(dev, "Cannot find any ACPI companion\n");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	ret = secocec_acpi_probe(secocec);
+	if (ret) {
+		dev_err(dev, "Cannot assign gpio to IRQ\n");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	/* Firmware version check */
+	ret = smb_rd16(SECOCEC_VERSION, &val);
+	if (ret) {
+		dev_err(dev, "Cannot check fw version\n");
+		goto err;
+	}
+	if (val < SECOCEC_LATEST_FW) {
+		dev_err(dev, "CEC Firmware not supported (v.%04x). Use ver > v.%04x\n",
+			val, SECOCEC_LATEST_FW);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ret = devm_request_threaded_irq(dev,
+					secocec->irq,
+					NULL,
+					secocec_irq_handler,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					dev_name(&pdev->dev), secocec);
+
+	if (ret) {
+		dev_err(dev, "Cannot request IRQ %d\n", secocec->irq);
+		ret = -EIO;
+		goto err;
+	}
+
+	/* Allocate CEC adapter */
+	secocec->cec_adap = cec_allocate_adapter(&secocec_cec_adap_ops,
+						 secocec,
+						 dev_name(dev),
+						 CEC_CAP_DEFAULTS |
+						 CEC_CAP_CONNECTOR_INFO,
+						 SECOCEC_MAX_ADDRS);
+
+	if (IS_ERR(secocec->cec_adap)) {
+		ret = PTR_ERR(secocec->cec_adap);
+		goto err;
+	}
+
+	secocec->notifier = cec_notifier_cec_adap_register(hdmi_dev, conn,
+							   secocec->cec_adap);
+	if (!secocec->notifier) {
+		ret = -ENOMEM;
+		goto err_delete_adapter;
+	}
+
+	ret = cec_register_adapter(secocec->cec_adap, dev);
+	if (ret)
+		goto err_notifier;
+
+	ret = secocec_ir_probe(secocec);
+	if (ret)
+		goto err_notifier;
+
+	platform_set_drvdata(pdev, secocec);
+
+	dev_dbg(dev, "Device registered\n");
+
+	return ret;
+
+err_notifier:
+	cec_notifier_cec_adap_unregister(secocec->notifier, secocec->cec_adap);
+err_delete_adapter:
+	cec_delete_adapter(secocec->cec_adap);
+err:
+	release_region(BRA_SMB_BASE_ADDR, 7);
+	dev_err(dev, "%s device probe failed\n", dev_name(dev));
+
+	return ret;
+}
+
+static int secocec_remove(struct platform_device *pdev)
+{
+	struct secocec_data *secocec = platform_get_drvdata(pdev);
+	u16 val;
+
+	if (secocec->ir) {
+		smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+
+		smb_wr16(SECOCEC_ENABLE_REG_1, val & ~SECOCEC_ENABLE_REG_1_IR);
+
+		dev_dbg(&pdev->dev, "IR disabled\n");
+	}
+	cec_notifier_cec_adap_unregister(secocec->notifier, secocec->cec_adap);
+	cec_unregister_adapter(secocec->cec_adap);
+
+	release_region(BRA_SMB_BASE_ADDR, 7);
+
+	dev_dbg(&pdev->dev, "CEC device removed\n");
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int secocec_suspend(struct device *dev)
+{
+	int status;
+	u16 val;
+
+	dev_dbg(dev, "Device going to suspend, disabling\n");
+
+	/* Clear the status register */
+	status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
+	if (status)
+		goto err;
+
+	status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+	if (status)
+		goto err;
+
+	/* Disable the interrupts */
+	status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+	if (status)
+		goto err;
+
+	status = smb_wr16(SECOCEC_ENABLE_REG_1, val &
+			  ~SECOCEC_ENABLE_REG_1_CEC & ~SECOCEC_ENABLE_REG_1_IR);
+	if (status)
+		goto err;
+
+	return 0;
+
+err:
+	dev_err(dev, "Suspend failed: %d\n", status);
+	return status;
+}
+
+static int secocec_resume(struct device *dev)
+{
+	int status;
+	u16 val;
+
+	dev_dbg(dev, "Resuming device from suspend\n");
+
+	/* Clear the status register */
+	status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
+	if (status)
+		goto err;
+
+	status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+	if (status)
+		goto err;
+
+	/* Enable the interrupts */
+	status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+	if (status)
+		goto err;
+
+	status = smb_wr16(SECOCEC_ENABLE_REG_1, val | SECOCEC_ENABLE_REG_1_CEC);
+	if (status)
+		goto err;
+
+	dev_dbg(dev, "Device resumed from suspend\n");
+
+	return 0;
+
+err:
+	dev_err(dev, "Resume failed: %d\n", status);
+	return status;
+}
+
+static SIMPLE_DEV_PM_OPS(secocec_pm_ops, secocec_suspend, secocec_resume);
+#define SECOCEC_PM_OPS (&secocec_pm_ops)
+#else
+#define SECOCEC_PM_OPS NULL
+#endif
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id secocec_acpi_match[] = {
+	{"CEC00001", 0},
+	{},
+};
+
+MODULE_DEVICE_TABLE(acpi, secocec_acpi_match);
+#endif
+
+static struct platform_driver secocec_driver = {
+	.driver = {
+		   .name = SECOCEC_DEV_NAME,
+		   .acpi_match_table = ACPI_PTR(secocec_acpi_match),
+		   .pm = SECOCEC_PM_OPS,
+	},
+	.probe = secocec_probe,
+	.remove = secocec_remove,
+};
+
+module_platform_driver(secocec_driver);
+
+MODULE_DESCRIPTION("SECO CEC X86 Driver");
+MODULE_AUTHOR("Ettore Chimenti <ek5.chimenti@gmail.com>");
+MODULE_LICENSE("Dual BSD/GPL");