Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 398 insertions, 0 deletions

diff --git a/drivers/media/cec/platform/sti/stih-cec.c b/drivers/media/cec/platform/sti/stih-cec.c
new file mode 100644
index 000000000..4edbdd095
--- /dev/null
+++ b/drivers/media/cec/platform/sti/stih-cec.c
@@ -0,0 +1,398 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * STIH4xx CEC driver
+ * Copyright (C) STMicroelectronics SA 2016
+ *
+ */
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include <media/cec.h>
+#include <media/cec-notifier.h>
+
+#define CEC_NAME	"stih-cec"
+
+/* CEC registers  */
+#define CEC_CLK_DIV           0x0
+#define CEC_CTRL              0x4
+#define CEC_IRQ_CTRL          0x8
+#define CEC_STATUS            0xC
+#define CEC_EXT_STATUS        0x10
+#define CEC_TX_CTRL           0x14
+#define CEC_FREE_TIME_THRESH  0x18
+#define CEC_BIT_TOUT_THRESH   0x1C
+#define CEC_BIT_PULSE_THRESH  0x20
+#define CEC_DATA              0x24
+#define CEC_TX_ARRAY_CTRL     0x28
+#define CEC_CTRL2             0x2C
+#define CEC_TX_ERROR_STS      0x30
+#define CEC_ADDR_TABLE        0x34
+#define CEC_DATA_ARRAY_CTRL   0x38
+#define CEC_DATA_ARRAY_STATUS 0x3C
+#define CEC_TX_DATA_BASE      0x40
+#define CEC_TX_DATA_TOP       0x50
+#define CEC_TX_DATA_SIZE      0x1
+#define CEC_RX_DATA_BASE      0x54
+#define CEC_RX_DATA_TOP       0x64
+#define CEC_RX_DATA_SIZE      0x1
+
+/* CEC_CTRL2 */
+#define CEC_LINE_INACTIVE_EN   BIT(0)
+#define CEC_AUTO_BUS_ERR_EN    BIT(1)
+#define CEC_STOP_ON_ARB_ERR_EN BIT(2)
+#define CEC_TX_REQ_WAIT_EN     BIT(3)
+
+/* CEC_DATA_ARRAY_CTRL */
+#define CEC_TX_ARRAY_EN          BIT(0)
+#define CEC_RX_ARRAY_EN          BIT(1)
+#define CEC_TX_ARRAY_RESET       BIT(2)
+#define CEC_RX_ARRAY_RESET       BIT(3)
+#define CEC_TX_N_OF_BYTES_IRQ_EN BIT(4)
+#define CEC_TX_STOP_ON_NACK      BIT(7)
+
+/* CEC_TX_ARRAY_CTRL */
+#define CEC_TX_N_OF_BYTES  0x1F
+#define CEC_TX_START       BIT(5)
+#define CEC_TX_AUTO_SOM_EN BIT(6)
+#define CEC_TX_AUTO_EOM_EN BIT(7)
+
+/* CEC_IRQ_CTRL */
+#define CEC_TX_DONE_IRQ_EN   BIT(0)
+#define CEC_ERROR_IRQ_EN     BIT(2)
+#define CEC_RX_DONE_IRQ_EN   BIT(3)
+#define CEC_RX_SOM_IRQ_EN    BIT(4)
+#define CEC_RX_EOM_IRQ_EN    BIT(5)
+#define CEC_FREE_TIME_IRQ_EN BIT(6)
+#define CEC_PIN_STS_IRQ_EN   BIT(7)
+
+/* CEC_CTRL */
+#define CEC_IN_FILTER_EN    BIT(0)
+#define CEC_PWR_SAVE_EN     BIT(1)
+#define CEC_EN              BIT(4)
+#define CEC_ACK_CTRL        BIT(5)
+#define CEC_RX_RESET_EN     BIT(6)
+#define CEC_IGNORE_RX_ERROR BIT(7)
+
+/* CEC_STATUS */
+#define CEC_TX_DONE_STS       BIT(0)
+#define CEC_TX_ACK_GET_STS    BIT(1)
+#define CEC_ERROR_STS         BIT(2)
+#define CEC_RX_DONE_STS       BIT(3)
+#define CEC_RX_SOM_STS        BIT(4)
+#define CEC_RX_EOM_STS        BIT(5)
+#define CEC_FREE_TIME_IRQ_STS BIT(6)
+#define CEC_PIN_STS           BIT(7)
+#define CEC_SBIT_TOUT_STS     BIT(8)
+#define CEC_DBIT_TOUT_STS     BIT(9)
+#define CEC_LPULSE_ERROR_STS  BIT(10)
+#define CEC_HPULSE_ERROR_STS  BIT(11)
+#define CEC_TX_ERROR          BIT(12)
+#define CEC_TX_ARB_ERROR      BIT(13)
+#define CEC_RX_ERROR_MIN      BIT(14)
+#define CEC_RX_ERROR_MAX      BIT(15)
+
+/* Signal free time in bit periods (2.4ms) */
+#define CEC_PRESENT_INIT_SFT 7
+#define CEC_NEW_INIT_SFT     5
+#define CEC_RETRANSMIT_SFT   3
+
+/* Constants for CEC_BIT_TOUT_THRESH register */
+#define CEC_SBIT_TOUT_47MS BIT(1)
+#define CEC_SBIT_TOUT_48MS (BIT(0) | BIT(1))
+#define CEC_SBIT_TOUT_50MS BIT(2)
+#define CEC_DBIT_TOUT_27MS BIT(0)
+#define CEC_DBIT_TOUT_28MS BIT(1)
+#define CEC_DBIT_TOUT_29MS (BIT(0) | BIT(1))
+
+/* Constants for CEC_BIT_PULSE_THRESH register */
+#define CEC_BIT_LPULSE_03MS BIT(1)
+#define CEC_BIT_HPULSE_03MS BIT(3)
+
+/* Constants for CEC_DATA_ARRAY_STATUS register */
+#define CEC_RX_N_OF_BYTES                     0x1F
+#define CEC_TX_N_OF_BYTES_SENT                BIT(5)
+#define CEC_RX_OVERRUN                        BIT(6)
+
+struct stih_cec {
+	struct cec_adapter	*adap;
+	struct device		*dev;
+	struct clk		*clk;
+	void __iomem		*regs;
+	int			irq;
+	u32			irq_status;
+	struct cec_notifier	*notifier;
+};
+
+static int stih_cec_adap_enable(struct cec_adapter *adap, bool enable)
+{
+	struct stih_cec *cec = cec_get_drvdata(adap);
+
+	if (enable) {
+		/* The doc says (input TCLK_PERIOD * CEC_CLK_DIV) = 0.1ms */
+		unsigned long clk_freq = clk_get_rate(cec->clk);
+		u32 cec_clk_div = clk_freq / 10000;
+
+		writel(cec_clk_div, cec->regs + CEC_CLK_DIV);
+
+		/* Configuration of the durations activating a timeout */
+		writel(CEC_SBIT_TOUT_47MS | (CEC_DBIT_TOUT_28MS << 4),
+		       cec->regs + CEC_BIT_TOUT_THRESH);
+
+		/* Configuration of the smallest allowed duration for pulses */
+		writel(CEC_BIT_LPULSE_03MS | CEC_BIT_HPULSE_03MS,
+		       cec->regs + CEC_BIT_PULSE_THRESH);
+
+		/* Minimum received bit period threshold */
+		writel(BIT(5) | BIT(7), cec->regs + CEC_TX_CTRL);
+
+		/* Configuration of transceiver data arrays */
+		writel(CEC_TX_ARRAY_EN | CEC_RX_ARRAY_EN | CEC_TX_STOP_ON_NACK,
+		       cec->regs + CEC_DATA_ARRAY_CTRL);
+
+		/* Configuration of the control bits for CEC Transceiver */
+		writel(CEC_IN_FILTER_EN | CEC_EN | CEC_RX_RESET_EN,
+		       cec->regs + CEC_CTRL);
+
+		/* Clear logical addresses */
+		writel(0, cec->regs + CEC_ADDR_TABLE);
+
+		/* Clear the status register */
+		writel(0x0, cec->regs + CEC_STATUS);
+
+		/* Enable the interrupts */
+		writel(CEC_TX_DONE_IRQ_EN | CEC_RX_DONE_IRQ_EN |
+		       CEC_RX_SOM_IRQ_EN | CEC_RX_EOM_IRQ_EN |
+		       CEC_ERROR_IRQ_EN,
+		       cec->regs + CEC_IRQ_CTRL);
+
+	} else {
+		/* Clear logical addresses */
+		writel(0, cec->regs + CEC_ADDR_TABLE);
+
+		/* Clear the status register */
+		writel(0x0, cec->regs + CEC_STATUS);
+
+		/* Disable the interrupts */
+		writel(0, cec->regs + CEC_IRQ_CTRL);
+	}
+
+	return 0;
+}
+
+static int stih_cec_adap_log_addr(struct cec_adapter *adap, u8 logical_addr)
+{
+	struct stih_cec *cec = cec_get_drvdata(adap);
+	u32 reg = readl(cec->regs + CEC_ADDR_TABLE);
+
+	reg |= 1 << logical_addr;
+
+	if (logical_addr == CEC_LOG_ADDR_INVALID)
+		reg = 0;
+
+	writel(reg, cec->regs + CEC_ADDR_TABLE);
+
+	return 0;
+}
+
+static int stih_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
+				  u32 signal_free_time, struct cec_msg *msg)
+{
+	struct stih_cec *cec = cec_get_drvdata(adap);
+	int i;
+
+	/* Copy message into registers */
+	for (i = 0; i < msg->len; i++)
+		writeb(msg->msg[i], cec->regs + CEC_TX_DATA_BASE + i);
+
+	/*
+	 * Start transmission, configure hardware to add start and stop bits
+	 * Signal free time is handled by the hardware
+	 */
+	writel(CEC_TX_AUTO_SOM_EN | CEC_TX_AUTO_EOM_EN | CEC_TX_START |
+	       msg->len, cec->regs + CEC_TX_ARRAY_CTRL);
+
+	return 0;
+}
+
+static void stih_tx_done(struct stih_cec *cec, u32 status)
+{
+	if (status & CEC_TX_ERROR) {
+		cec_transmit_attempt_done(cec->adap, CEC_TX_STATUS_ERROR);
+		return;
+	}
+
+	if (status & CEC_TX_ARB_ERROR) {
+		cec_transmit_attempt_done(cec->adap, CEC_TX_STATUS_ARB_LOST);
+		return;
+	}
+
+	if (!(status & CEC_TX_ACK_GET_STS)) {
+		cec_transmit_attempt_done(cec->adap, CEC_TX_STATUS_NACK);
+		return;
+	}
+
+	cec_transmit_attempt_done(cec->adap, CEC_TX_STATUS_OK);
+}
+
+static void stih_rx_done(struct stih_cec *cec, u32 status)
+{
+	struct cec_msg msg = {};
+	u8 i;
+
+	if (status & CEC_RX_ERROR_MIN)
+		return;
+
+	if (status & CEC_RX_ERROR_MAX)
+		return;
+
+	msg.len = readl(cec->regs + CEC_DATA_ARRAY_STATUS) & 0x1f;
+
+	if (!msg.len)
+		return;
+
+	if (msg.len > CEC_MAX_MSG_SIZE)
+		msg.len = CEC_MAX_MSG_SIZE;
+
+	for (i = 0; i < msg.len; i++)
+		msg.msg[i] = readl(cec->regs + CEC_RX_DATA_BASE + i);
+
+	cec_received_msg(cec->adap, &msg);
+}
+
+static irqreturn_t stih_cec_irq_handler_thread(int irq, void *priv)
+{
+	struct stih_cec *cec = priv;
+
+	if (cec->irq_status & CEC_TX_DONE_STS)
+		stih_tx_done(cec, cec->irq_status);
+
+	if (cec->irq_status & CEC_RX_DONE_STS)
+		stih_rx_done(cec, cec->irq_status);
+
+	cec->irq_status = 0;
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t stih_cec_irq_handler(int irq, void *priv)
+{
+	struct stih_cec *cec = priv;
+
+	cec->irq_status = readl(cec->regs + CEC_STATUS);
+	writel(cec->irq_status, cec->regs + CEC_STATUS);
+
+	return IRQ_WAKE_THREAD;
+}
+
+static const struct cec_adap_ops sti_cec_adap_ops = {
+	.adap_enable = stih_cec_adap_enable,
+	.adap_log_addr = stih_cec_adap_log_addr,
+	.adap_transmit = stih_cec_adap_transmit,
+};
+
+static int stih_cec_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct stih_cec *cec;
+	struct device *hdmi_dev;
+	int ret;
+
+	hdmi_dev = cec_notifier_parse_hdmi_phandle(dev);
+
+	if (IS_ERR(hdmi_dev))
+		return PTR_ERR(hdmi_dev);
+
+	cec = devm_kzalloc(dev, sizeof(*cec), GFP_KERNEL);
+	if (!cec)
+		return -ENOMEM;
+
+	cec->dev = dev;
+
+	cec->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(cec->regs))
+		return PTR_ERR(cec->regs);
+
+	cec->irq = platform_get_irq(pdev, 0);
+	if (cec->irq < 0)
+		return cec->irq;
+
+	ret = devm_request_threaded_irq(dev, cec->irq, stih_cec_irq_handler,
+					stih_cec_irq_handler_thread, 0,
+					pdev->name, cec);
+	if (ret)
+		return ret;
+
+	cec->clk = devm_clk_get(dev, "cec-clk");
+	if (IS_ERR(cec->clk)) {
+		dev_err(dev, "Cannot get cec clock\n");
+		return PTR_ERR(cec->clk);
+	}
+
+	cec->adap = cec_allocate_adapter(&sti_cec_adap_ops, cec, CEC_NAME,
+					 CEC_CAP_DEFAULTS |
+					 CEC_CAP_CONNECTOR_INFO,
+					 CEC_MAX_LOG_ADDRS);
+	ret = PTR_ERR_OR_ZERO(cec->adap);
+	if (ret)
+		return ret;
+
+	cec->notifier = cec_notifier_cec_adap_register(hdmi_dev, NULL,
+						       cec->adap);
+	if (!cec->notifier) {
+		ret = -ENOMEM;
+		goto err_delete_adapter;
+	}
+
+	ret = cec_register_adapter(cec->adap, &pdev->dev);
+	if (ret)
+		goto err_notifier;
+
+	platform_set_drvdata(pdev, cec);
+	return 0;
+
+err_notifier:
+	cec_notifier_cec_adap_unregister(cec->notifier, cec->adap);
+
+err_delete_adapter:
+	cec_delete_adapter(cec->adap);
+	return ret;
+}
+
+static int stih_cec_remove(struct platform_device *pdev)
+{
+	struct stih_cec *cec = platform_get_drvdata(pdev);
+
+	cec_notifier_cec_adap_unregister(cec->notifier, cec->adap);
+	cec_unregister_adapter(cec->adap);
+
+	return 0;
+}
+
+static const struct of_device_id stih_cec_match[] = {
+	{
+		.compatible	= "st,stih-cec",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, stih_cec_match);
+
+static struct platform_driver stih_cec_pdrv = {
+	.probe	= stih_cec_probe,
+	.remove = stih_cec_remove,
+	.driver = {
+		.name		= CEC_NAME,
+		.of_match_table	= stih_cec_match,
+	},
+};
+
+module_platform_driver(stih_cec_pdrv);
+
+MODULE_AUTHOR("Benjamin Gaignard <benjamin.gaignard@linaro.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("STIH4xx CEC driver");