Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 540 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/ascot2e.c b/drivers/media/dvb-frontends/ascot2e.c
new file mode 100644
index 000000000..9b00b5623
--- /dev/null
+++ b/drivers/media/dvb-frontends/ascot2e.c
@@ -0,0 +1,540 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ascot2e.c
+ *
+ * Sony Ascot3E DVB-T/T2/C/C2 tuner driver
+ *
+ * Copyright 2012 Sony Corporation
+ * Copyright (C) 2014 NetUP Inc.
+ * Copyright (C) 2014 Sergey Kozlov <serjk@netup.ru>
+ * Copyright (C) 2014 Abylay Ospan <aospan@netup.ru>
+  */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/dvb/frontend.h>
+#include <linux/types.h>
+#include "ascot2e.h"
+#include <media/dvb_frontend.h>
+
+#define MAX_WRITE_REGSIZE 10
+
+enum ascot2e_state {
+	STATE_UNKNOWN,
+	STATE_SLEEP,
+	STATE_ACTIVE
+};
+
+struct ascot2e_priv {
+	u32			frequency;
+	u8			i2c_address;
+	struct i2c_adapter	*i2c;
+	enum ascot2e_state	state;
+	void			*set_tuner_data;
+	int			(*set_tuner)(void *, int);
+};
+
+enum ascot2e_tv_system_t {
+	ASCOT2E_DTV_DVBT_5,
+	ASCOT2E_DTV_DVBT_6,
+	ASCOT2E_DTV_DVBT_7,
+	ASCOT2E_DTV_DVBT_8,
+	ASCOT2E_DTV_DVBT2_1_7,
+	ASCOT2E_DTV_DVBT2_5,
+	ASCOT2E_DTV_DVBT2_6,
+	ASCOT2E_DTV_DVBT2_7,
+	ASCOT2E_DTV_DVBT2_8,
+	ASCOT2E_DTV_DVBC_6,
+	ASCOT2E_DTV_DVBC_8,
+	ASCOT2E_DTV_DVBC2_6,
+	ASCOT2E_DTV_DVBC2_8,
+	ASCOT2E_DTV_UNKNOWN
+};
+
+struct ascot2e_band_sett {
+	u8	if_out_sel;
+	u8	agc_sel;
+	u8	mix_oll;
+	u8	rf_gain;
+	u8	if_bpf_gc;
+	u8	fif_offset;
+	u8	bw_offset;
+	u8	bw;
+	u8	rf_oldet;
+	u8	if_bpf_f0;
+};
+
+#define ASCOT2E_AUTO		0xff
+#define ASCOT2E_OFFSET(ofs)	((u8)(ofs) & 0x1F)
+#define ASCOT2E_BW_6		0x00
+#define ASCOT2E_BW_7		0x01
+#define ASCOT2E_BW_8		0x02
+#define ASCOT2E_BW_1_7		0x03
+
+static struct ascot2e_band_sett ascot2e_sett[] = {
+	{ ASCOT2E_AUTO, ASCOT2E_AUTO, 0x03, ASCOT2E_AUTO, 0x06,
+	  ASCOT2E_OFFSET(-8), ASCOT2E_OFFSET(-6), ASCOT2E_BW_6,  0x0B, 0x00 },
+	{ ASCOT2E_AUTO, ASCOT2E_AUTO, 0x03, ASCOT2E_AUTO, 0x06,
+	  ASCOT2E_OFFSET(-8), ASCOT2E_OFFSET(-6), ASCOT2E_BW_6,  0x0B, 0x00 },
+	{ ASCOT2E_AUTO, ASCOT2E_AUTO, 0x03, ASCOT2E_AUTO, 0x06,
+	  ASCOT2E_OFFSET(-6), ASCOT2E_OFFSET(-4), ASCOT2E_BW_7,  0x0B, 0x00 },
+	{ ASCOT2E_AUTO, ASCOT2E_AUTO, 0x03, ASCOT2E_AUTO, 0x06,
+	  ASCOT2E_OFFSET(-4), ASCOT2E_OFFSET(-2), ASCOT2E_BW_8,  0x0B, 0x00 },
+	{ ASCOT2E_AUTO, ASCOT2E_AUTO, 0x03, ASCOT2E_AUTO, 0x06,
+	ASCOT2E_OFFSET(-10), ASCOT2E_OFFSET(-16), ASCOT2E_BW_1_7, 0x0B, 0x00 },
+	{ ASCOT2E_AUTO, ASCOT2E_AUTO, 0x03, ASCOT2E_AUTO, 0x06,
+	  ASCOT2E_OFFSET(-8), ASCOT2E_OFFSET(-6), ASCOT2E_BW_6,  0x0B, 0x00 },
+	{ ASCOT2E_AUTO, ASCOT2E_AUTO, 0x03, ASCOT2E_AUTO, 0x06,
+	  ASCOT2E_OFFSET(-8), ASCOT2E_OFFSET(-6), ASCOT2E_BW_6,  0x0B, 0x00 },
+	{ ASCOT2E_AUTO, ASCOT2E_AUTO, 0x03, ASCOT2E_AUTO, 0x06,
+	  ASCOT2E_OFFSET(-6), ASCOT2E_OFFSET(-4), ASCOT2E_BW_7,  0x0B, 0x00 },
+	{ ASCOT2E_AUTO, ASCOT2E_AUTO, 0x03, ASCOT2E_AUTO, 0x06,
+	  ASCOT2E_OFFSET(-4), ASCOT2E_OFFSET(-2), ASCOT2E_BW_8,  0x0B, 0x00 },
+	{ ASCOT2E_AUTO, ASCOT2E_AUTO, 0x02, ASCOT2E_AUTO, 0x03,
+	  ASCOT2E_OFFSET(-6), ASCOT2E_OFFSET(-8), ASCOT2E_BW_6,  0x09, 0x00 },
+	{ ASCOT2E_AUTO, ASCOT2E_AUTO, 0x02, ASCOT2E_AUTO, 0x03,
+	  ASCOT2E_OFFSET(-2), ASCOT2E_OFFSET(-1), ASCOT2E_BW_8,  0x09, 0x00 },
+	{ ASCOT2E_AUTO, ASCOT2E_AUTO, 0x03, ASCOT2E_AUTO, 0x01,
+	  ASCOT2E_OFFSET(-6), ASCOT2E_OFFSET(-4), ASCOT2E_BW_6,  0x09, 0x00 },
+	{ ASCOT2E_AUTO, ASCOT2E_AUTO, 0x03, ASCOT2E_AUTO, 0x01,
+	  ASCOT2E_OFFSET(-2), ASCOT2E_OFFSET(2),  ASCOT2E_BW_8,  0x09, 0x00 }
+};
+
+static void ascot2e_i2c_debug(struct ascot2e_priv *priv,
+			      u8 reg, u8 write, const u8 *data, u32 len)
+{
+	dev_dbg(&priv->i2c->dev, "ascot2e: I2C %s reg 0x%02x size %d\n",
+		(write == 0 ? "read" : "write"), reg, len);
+	print_hex_dump_bytes("ascot2e: I2C data: ",
+		DUMP_PREFIX_OFFSET, data, len);
+}
+
+static int ascot2e_write_regs(struct ascot2e_priv *priv,
+			      u8 reg, const u8 *data, u32 len)
+{
+	int ret;
+	u8 buf[MAX_WRITE_REGSIZE + 1];
+	struct i2c_msg msg[1] = {
+		{
+			.addr = priv->i2c_address,
+			.flags = 0,
+			.len = len + 1,
+			.buf = buf,
+		}
+	};
+
+	if (len + 1 > sizeof(buf)) {
+		dev_warn(&priv->i2c->dev,"wr reg=%04x: len=%d is too big!\n",
+			 reg, len + 1);
+		return -E2BIG;
+	}
+
+	ascot2e_i2c_debug(priv, reg, 1, data, len);
+	buf[0] = reg;
+	memcpy(&buf[1], data, len);
+	ret = i2c_transfer(priv->i2c, msg, 1);
+	if (ret >= 0 && ret != 1)
+		ret = -EREMOTEIO;
+	if (ret < 0) {
+		dev_warn(&priv->i2c->dev,
+			"%s: i2c wr failed=%d reg=%02x len=%d\n",
+			KBUILD_MODNAME, ret, reg, len);
+		return ret;
+	}
+	return 0;
+}
+
+static int ascot2e_write_reg(struct ascot2e_priv *priv, u8 reg, u8 val)
+{
+	u8 tmp = val; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */
+
+	return ascot2e_write_regs(priv, reg, &tmp, 1);
+}
+
+static int ascot2e_read_regs(struct ascot2e_priv *priv,
+			     u8 reg, u8 *val, u32 len)
+{
+	int ret;
+	struct i2c_msg msg[2] = {
+		{
+			.addr = priv->i2c_address,
+			.flags = 0,
+			.len = 1,
+			.buf = &reg,
+		}, {
+			.addr = priv->i2c_address,
+			.flags = I2C_M_RD,
+			.len = len,
+			.buf = val,
+		}
+	};
+
+	ret = i2c_transfer(priv->i2c, &msg[0], 1);
+	if (ret >= 0 && ret != 1)
+		ret = -EREMOTEIO;
+	if (ret < 0) {
+		dev_warn(&priv->i2c->dev,
+			"%s: I2C rw failed=%d addr=%02x reg=%02x\n",
+			KBUILD_MODNAME, ret, priv->i2c_address, reg);
+		return ret;
+	}
+	ret = i2c_transfer(priv->i2c, &msg[1], 1);
+	if (ret >= 0 && ret != 1)
+		ret = -EREMOTEIO;
+	if (ret < 0) {
+		dev_warn(&priv->i2c->dev,
+			"%s: i2c rd failed=%d addr=%02x reg=%02x\n",
+			KBUILD_MODNAME, ret, priv->i2c_address, reg);
+		return ret;
+	}
+	ascot2e_i2c_debug(priv, reg, 0, val, len);
+	return 0;
+}
+
+static int ascot2e_read_reg(struct ascot2e_priv *priv, u8 reg, u8 *val)
+{
+	return ascot2e_read_regs(priv, reg, val, 1);
+}
+
+static int ascot2e_set_reg_bits(struct ascot2e_priv *priv,
+				u8 reg, u8 data, u8 mask)
+{
+	int res;
+	u8 rdata;
+
+	if (mask != 0xff) {
+		res = ascot2e_read_reg(priv, reg, &rdata);
+		if (res != 0)
+			return res;
+		data = ((data & mask) | (rdata & (mask ^ 0xFF)));
+	}
+	return ascot2e_write_reg(priv, reg, data);
+}
+
+static int ascot2e_enter_power_save(struct ascot2e_priv *priv)
+{
+	u8 data[2];
+
+	dev_dbg(&priv->i2c->dev, "%s()\n", __func__);
+	if (priv->state == STATE_SLEEP)
+		return 0;
+	data[0] = 0x00;
+	data[1] = 0x04;
+	ascot2e_write_regs(priv, 0x14, data, 2);
+	ascot2e_write_reg(priv, 0x50, 0x01);
+	priv->state = STATE_SLEEP;
+	return 0;
+}
+
+static int ascot2e_leave_power_save(struct ascot2e_priv *priv)
+{
+	u8 data[2] = { 0xFB, 0x0F };
+
+	dev_dbg(&priv->i2c->dev, "%s()\n", __func__);
+	if (priv->state == STATE_ACTIVE)
+		return 0;
+	ascot2e_write_regs(priv, 0x14, data, 2);
+	ascot2e_write_reg(priv, 0x50, 0x00);
+	priv->state = STATE_ACTIVE;
+	return 0;
+}
+
+static int ascot2e_init(struct dvb_frontend *fe)
+{
+	struct ascot2e_priv *priv = fe->tuner_priv;
+
+	dev_dbg(&priv->i2c->dev, "%s()\n", __func__);
+	return ascot2e_leave_power_save(priv);
+}
+
+static void ascot2e_release(struct dvb_frontend *fe)
+{
+	struct ascot2e_priv *priv = fe->tuner_priv;
+
+	dev_dbg(&priv->i2c->dev, "%s()\n", __func__);
+	kfree(fe->tuner_priv);
+	fe->tuner_priv = NULL;
+}
+
+static int ascot2e_sleep(struct dvb_frontend *fe)
+{
+	struct ascot2e_priv *priv = fe->tuner_priv;
+
+	dev_dbg(&priv->i2c->dev, "%s()\n", __func__);
+	ascot2e_enter_power_save(priv);
+	return 0;
+}
+
+static enum ascot2e_tv_system_t ascot2e_get_tv_system(struct dvb_frontend *fe)
+{
+	enum ascot2e_tv_system_t system = ASCOT2E_DTV_UNKNOWN;
+	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+	struct ascot2e_priv *priv = fe->tuner_priv;
+
+	if (p->delivery_system == SYS_DVBT) {
+		if (p->bandwidth_hz <= 5000000)
+			system = ASCOT2E_DTV_DVBT_5;
+		else if (p->bandwidth_hz <= 6000000)
+			system = ASCOT2E_DTV_DVBT_6;
+		else if (p->bandwidth_hz <= 7000000)
+			system = ASCOT2E_DTV_DVBT_7;
+		else if (p->bandwidth_hz <= 8000000)
+			system = ASCOT2E_DTV_DVBT_8;
+		else {
+			system = ASCOT2E_DTV_DVBT_8;
+			p->bandwidth_hz = 8000000;
+		}
+	} else if (p->delivery_system == SYS_DVBT2) {
+		if (p->bandwidth_hz <= 5000000)
+			system = ASCOT2E_DTV_DVBT2_5;
+		else if (p->bandwidth_hz <= 6000000)
+			system = ASCOT2E_DTV_DVBT2_6;
+		else if (p->bandwidth_hz <= 7000000)
+			system = ASCOT2E_DTV_DVBT2_7;
+		else if (p->bandwidth_hz <= 8000000)
+			system = ASCOT2E_DTV_DVBT2_8;
+		else {
+			system = ASCOT2E_DTV_DVBT2_8;
+			p->bandwidth_hz = 8000000;
+		}
+	} else if (p->delivery_system == SYS_DVBC_ANNEX_A) {
+		if (p->bandwidth_hz <= 6000000)
+			system = ASCOT2E_DTV_DVBC_6;
+		else if (p->bandwidth_hz <= 8000000)
+			system = ASCOT2E_DTV_DVBC_8;
+	}
+	dev_dbg(&priv->i2c->dev,
+		"%s(): ASCOT2E DTV system %d (delsys %d, bandwidth %d)\n",
+		__func__, (int)system, p->delivery_system, p->bandwidth_hz);
+	return system;
+}
+
+static int ascot2e_set_params(struct dvb_frontend *fe)
+{
+	u8 data[10];
+	u32 frequency;
+	enum ascot2e_tv_system_t tv_system;
+	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+	struct ascot2e_priv *priv = fe->tuner_priv;
+
+	dev_dbg(&priv->i2c->dev, "%s(): tune frequency %dkHz\n",
+		__func__, p->frequency / 1000);
+	tv_system = ascot2e_get_tv_system(fe);
+
+	if (tv_system == ASCOT2E_DTV_UNKNOWN) {
+		dev_dbg(&priv->i2c->dev, "%s(): unknown DTV system\n",
+			__func__);
+		return -EINVAL;
+	}
+	if (priv->set_tuner)
+		priv->set_tuner(priv->set_tuner_data, 1);
+	frequency = roundup(p->frequency / 1000, 25);
+	if (priv->state == STATE_SLEEP)
+		ascot2e_leave_power_save(priv);
+
+	/* IF_OUT_SEL / AGC_SEL setting */
+	data[0] = 0x00;
+	if (ascot2e_sett[tv_system].agc_sel != ASCOT2E_AUTO) {
+		/* AGC pin setting from parameter table */
+		data[0] |= (u8)(
+			(ascot2e_sett[tv_system].agc_sel & 0x03) << 3);
+	}
+	if (ascot2e_sett[tv_system].if_out_sel != ASCOT2E_AUTO) {
+		/* IFOUT pin setting from parameter table */
+		data[0] |= (u8)(
+			(ascot2e_sett[tv_system].if_out_sel & 0x01) << 2);
+	}
+	/* Set bit[4:2] only */
+	ascot2e_set_reg_bits(priv, 0x05, data[0], 0x1c);
+	/* 0x06 - 0x0F */
+	/* REF_R setting (0x06) */
+	if (tv_system == ASCOT2E_DTV_DVBC_6 ||
+			tv_system == ASCOT2E_DTV_DVBC_8) {
+		/* xtal, xtal*2 */
+		data[0] = (frequency > 500000) ? 16 : 32;
+	} else {
+		/* xtal/8, xtal/4 */
+		data[0] = (frequency > 500000) ? 2 : 4;
+	}
+	/* XOSC_SEL=100uA */
+	data[1] = 0x04;
+	/* KBW setting (0x08), KC0 setting (0x09), KC1 setting (0x0A) */
+	if (tv_system == ASCOT2E_DTV_DVBC_6 ||
+			tv_system == ASCOT2E_DTV_DVBC_8) {
+		data[2] = 18;
+		data[3] = 120;
+		data[4] = 20;
+	} else {
+		data[2] = 48;
+		data[3] = 10;
+		data[4] = 30;
+	}
+	/* ORDER/R2_RANGE/R2_BANK/C2_BANK setting (0x0B) */
+	if (tv_system == ASCOT2E_DTV_DVBC_6 ||
+			tv_system == ASCOT2E_DTV_DVBC_8)
+		data[5] = (frequency > 500000) ? 0x08 : 0x0c;
+	else
+		data[5] = (frequency > 500000) ? 0x30 : 0x38;
+	/* Set MIX_OLL (0x0C) value from parameter table */
+	data[6] = ascot2e_sett[tv_system].mix_oll;
+	/* Set RF_GAIN (0x0D) setting from parameter table */
+	if (ascot2e_sett[tv_system].rf_gain == ASCOT2E_AUTO) {
+		/* RF_GAIN auto control enable */
+		ascot2e_write_reg(priv, 0x4E, 0x01);
+		/* RF_GAIN Default value */
+		data[7] = 0x00;
+	} else {
+		/* RF_GAIN auto control disable */
+		ascot2e_write_reg(priv, 0x4E, 0x00);
+		data[7] = ascot2e_sett[tv_system].rf_gain;
+	}
+	/* Set IF_BPF_GC/FIF_OFFSET (0x0E) value from parameter table */
+	data[8] = (u8)((ascot2e_sett[tv_system].fif_offset << 3) |
+		(ascot2e_sett[tv_system].if_bpf_gc & 0x07));
+	/* Set BW_OFFSET (0x0F) value from parameter table */
+	data[9] = ascot2e_sett[tv_system].bw_offset;
+	ascot2e_write_regs(priv, 0x06, data, 10);
+	/*
+	 * 0x45 - 0x47
+	 * LNA optimization setting
+	 * RF_LNA_DIST1-5, RF_LNA_CM
+	 */
+	if (tv_system == ASCOT2E_DTV_DVBC_6 ||
+			tv_system == ASCOT2E_DTV_DVBC_8) {
+		data[0] = 0x0F;
+		data[1] = 0x00;
+		data[2] = 0x01;
+	} else {
+		data[0] = 0x0F;
+		data[1] = 0x00;
+		data[2] = 0x03;
+	}
+	ascot2e_write_regs(priv, 0x45, data, 3);
+	/* 0x49 - 0x4A
+	 Set RF_OLDET_ENX/RF_OLDET_OLL value from parameter table */
+	data[0] = ascot2e_sett[tv_system].rf_oldet;
+	/* Set IF_BPF_F0 value from parameter table */
+	data[1] = ascot2e_sett[tv_system].if_bpf_f0;
+	ascot2e_write_regs(priv, 0x49, data, 2);
+	/*
+	 * Tune now
+	 * RFAGC fast mode / RFAGC auto control enable
+	 * (set bit[7], bit[5:4] only)
+	 * vco_cal = 1, set MIX_OL_CPU_EN
+	 */
+	ascot2e_set_reg_bits(priv, 0x0c, 0x90, 0xb0);
+	/* Logic wake up, CPU wake up */
+	data[0] = 0xc4;
+	data[1] = 0x40;
+	ascot2e_write_regs(priv, 0x03, data, 2);
+	/* 0x10 - 0x14 */
+	data[0] = (u8)(frequency & 0xFF);         /* 0x10: FRF_L */
+	data[1] = (u8)((frequency >> 8) & 0xFF);  /* 0x11: FRF_M */
+	data[2] = (u8)((frequency >> 16) & 0x0F); /* 0x12: FRF_H (bit[3:0]) */
+	/* 0x12: BW (bit[5:4]) */
+	data[2] |= (u8)(ascot2e_sett[tv_system].bw << 4);
+	data[3] = 0xFF; /* 0x13: VCO calibration enable */
+	data[4] = 0xFF; /* 0x14: Analog block enable */
+	/* Tune (Burst write) */
+	ascot2e_write_regs(priv, 0x10, data, 5);
+	msleep(50);
+	/* CPU deep sleep */
+	ascot2e_write_reg(priv, 0x04, 0x00);
+	/* Logic sleep */
+	ascot2e_write_reg(priv, 0x03, 0xC0);
+	/* RFAGC normal mode (set bit[5:4] only) */
+	ascot2e_set_reg_bits(priv, 0x0C, 0x00, 0x30);
+	priv->frequency = frequency;
+	return 0;
+}
+
+static int ascot2e_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+	struct ascot2e_priv *priv = fe->tuner_priv;
+
+	*frequency = priv->frequency * 1000;
+	return 0;
+}
+
+static const struct dvb_tuner_ops ascot2e_tuner_ops = {
+	.info = {
+		.name = "Sony ASCOT2E",
+		.frequency_min_hz  =    1 * MHz,
+		.frequency_max_hz  = 1200 * MHz,
+		.frequency_step_hz =   25 * kHz,
+	},
+	.init = ascot2e_init,
+	.release = ascot2e_release,
+	.sleep = ascot2e_sleep,
+	.set_params = ascot2e_set_params,
+	.get_frequency = ascot2e_get_frequency,
+};
+
+struct dvb_frontend *ascot2e_attach(struct dvb_frontend *fe,
+				    const struct ascot2e_config *config,
+				    struct i2c_adapter *i2c)
+{
+	u8 data[4];
+	struct ascot2e_priv *priv = NULL;
+
+	priv = kzalloc(sizeof(struct ascot2e_priv), GFP_KERNEL);
+	if (priv == NULL)
+		return NULL;
+	priv->i2c_address = (config->i2c_address >> 1);
+	priv->i2c = i2c;
+	priv->set_tuner_data = config->set_tuner_priv;
+	priv->set_tuner = config->set_tuner_callback;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+
+	/* 16 MHz xTal frequency */
+	data[0] = 16;
+	/* VCO current setting */
+	data[1] = 0x06;
+	/* Logic wake up, CPU boot */
+	data[2] = 0xC4;
+	data[3] = 0x40;
+	ascot2e_write_regs(priv, 0x01, data, 4);
+	/* RFVGA optimization setting (RF_DIST0 - RF_DIST2) */
+	data[0] = 0x10;
+	data[1] = 0x3F;
+	data[2] = 0x25;
+	ascot2e_write_regs(priv, 0x22, data, 3);
+	/* PLL mode setting */
+	ascot2e_write_reg(priv, 0x28, 0x1e);
+	/* RSSI setting */
+	ascot2e_write_reg(priv, 0x59, 0x04);
+	/* TODO check CPU HW error state here */
+	msleep(80);
+	/* Xtal oscillator current control setting */
+	ascot2e_write_reg(priv, 0x4c, 0x01);
+	/* XOSC_SEL=100uA */
+	ascot2e_write_reg(priv, 0x07, 0x04);
+	/* CPU deep sleep */
+	ascot2e_write_reg(priv, 0x04, 0x00);
+	/* Logic sleep */
+	ascot2e_write_reg(priv, 0x03, 0xc0);
+	/* Power save setting */
+	data[0] = 0x00;
+	data[1] = 0x04;
+	ascot2e_write_regs(priv, 0x14, data, 2);
+	ascot2e_write_reg(priv, 0x50, 0x01);
+	priv->state = STATE_SLEEP;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0);
+
+	memcpy(&fe->ops.tuner_ops, &ascot2e_tuner_ops,
+				sizeof(struct dvb_tuner_ops));
+	fe->tuner_priv = priv;
+	dev_info(&priv->i2c->dev,
+		"Sony ASCOT2E attached on addr=%x at I2C adapter %p\n",
+		priv->i2c_address, priv->i2c);
+	return fe;
+}
+EXPORT_SYMBOL(ascot2e_attach);
+
+MODULE_DESCRIPTION("Sony ASCOT2E terr/cab tuner driver");
+MODULE_AUTHOR("info@netup.ru");
+MODULE_LICENSE("GPL");