Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 551 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/dib3000mb_priv.h b/drivers/media/dvb-frontends/dib3000mb_priv.h
new file mode 100644
index 000000000..2503966fb
--- /dev/null
+++ b/drivers/media/dvb-frontends/dib3000mb_priv.h
@@ -0,0 +1,551 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * dib3000mb_priv.h
+ *
+ * Copyright (C) 2004 Patrick Boettcher (patrick.boettcher@posteo.de)
+ *
+ * for more information see dib3000mb.c .
+ */
+
+#ifndef __DIB3000MB_PRIV_H_INCLUDED__
+#define __DIB3000MB_PRIV_H_INCLUDED__
+
+/* handy shortcuts */
+#define rd(reg) dib3000_read_reg(state,reg)
+
+#define wr(reg,val) if (dib3000_write_reg(state,reg,val)) \
+	{ pr_err("while sending 0x%04x to 0x%04x.", val, reg); return -EREMOTEIO; }
+
+#define wr_foreach(a,v) { int i; \
+	if (sizeof(a) != sizeof(v)) \
+		pr_err("sizeof: %zu %zu is different", sizeof(a), sizeof(v));\
+	for (i=0; i < sizeof(a)/sizeof(u16); i++) \
+		wr(a[i],v[i]); \
+	}
+
+#define set_or(reg,val) wr(reg,rd(reg) | val)
+
+#define set_and(reg,val) wr(reg,rd(reg) & val)
+
+/* debug */
+
+#define dprintk(level, fmt, arg...) do {				\
+	if (debug & level)						\
+		printk(KERN_DEBUG pr_fmt("%s: " fmt),			\
+		       __func__, ##arg);				\
+} while (0)
+
+/* mask for enabling a specific pid for the pid_filter */
+#define DIB3000_ACTIVATE_PID_FILTERING	(0x2000)
+
+/* common values for tuning */
+#define DIB3000_ALPHA_0					(     0)
+#define DIB3000_ALPHA_1					(     1)
+#define DIB3000_ALPHA_2					(     2)
+#define DIB3000_ALPHA_4					(     4)
+
+#define DIB3000_CONSTELLATION_QPSK		(     0)
+#define DIB3000_CONSTELLATION_16QAM		(     1)
+#define DIB3000_CONSTELLATION_64QAM		(     2)
+
+#define DIB3000_GUARD_TIME_1_32			(     0)
+#define DIB3000_GUARD_TIME_1_16			(     1)
+#define DIB3000_GUARD_TIME_1_8			(     2)
+#define DIB3000_GUARD_TIME_1_4			(     3)
+
+#define DIB3000_TRANSMISSION_MODE_2K	(     0)
+#define DIB3000_TRANSMISSION_MODE_8K	(     1)
+
+#define DIB3000_SELECT_LP				(     0)
+#define DIB3000_SELECT_HP				(     1)
+
+#define DIB3000_FEC_1_2					(     1)
+#define DIB3000_FEC_2_3					(     2)
+#define DIB3000_FEC_3_4					(     3)
+#define DIB3000_FEC_5_6					(     5)
+#define DIB3000_FEC_7_8					(     7)
+
+#define DIB3000_HRCH_OFF				(     0)
+#define DIB3000_HRCH_ON					(     1)
+
+#define DIB3000_DDS_INVERSION_OFF		(     0)
+#define DIB3000_DDS_INVERSION_ON		(     1)
+
+#define DIB3000_TUNER_WRITE_ENABLE(a)	(0xffff & (a << 8))
+#define DIB3000_TUNER_WRITE_DISABLE(a)	(0xffff & ((a << 8) | (1 << 7)))
+
+#define DIB3000_REG_MANUFACTOR_ID		(  1025)
+#define DIB3000_I2C_ID_DIBCOM			(0x01b3)
+
+#define DIB3000_REG_DEVICE_ID			(  1026)
+#define DIB3000MB_DEVICE_ID				(0x3000)
+#define DIB3000MC_DEVICE_ID				(0x3001)
+#define DIB3000P_DEVICE_ID				(0x3002)
+
+/* frontend state */
+struct dib3000_state {
+	struct i2c_adapter* i2c;
+
+/* configuration settings */
+	struct dib3000_config config;
+
+	struct dvb_frontend frontend;
+	int timing_offset;
+	int timing_offset_comp_done;
+
+	u32 last_tuned_bw;
+	u32 last_tuned_freq;
+};
+
+/* register addresses and some of their default values */
+
+/* restart subsystems */
+#define DIB3000MB_REG_RESTART			(     0)
+
+#define DIB3000MB_RESTART_OFF			(     0)
+#define DIB3000MB_RESTART_AUTO_SEARCH		(1 << 1)
+#define DIB3000MB_RESTART_CTRL				(1 << 2)
+#define DIB3000MB_RESTART_AGC				(1 << 3)
+
+/* FFT size */
+#define DIB3000MB_REG_FFT				(     1)
+
+/* Guard time */
+#define DIB3000MB_REG_GUARD_TIME		(     2)
+
+/* QAM */
+#define DIB3000MB_REG_QAM				(     3)
+
+/* Alpha coefficient high priority Viterbi algorithm */
+#define DIB3000MB_REG_VIT_ALPHA			(     4)
+
+/* spectrum inversion */
+#define DIB3000MB_REG_DDS_INV			(     5)
+
+/* DDS frequency value (IF position) ad ? values don't match reg_3000mb.txt */
+#define DIB3000MB_REG_DDS_FREQ_MSB		(     6)
+#define DIB3000MB_REG_DDS_FREQ_LSB		(     7)
+#define DIB3000MB_DDS_FREQ_MSB				(   178)
+#define DIB3000MB_DDS_FREQ_LSB				(  8990)
+
+/* timing frequency (carrier spacing) */
+static u16 dib3000mb_reg_timing_freq[] = { 8,9 };
+static u16 dib3000mb_timing_freq[][2] = {
+	{ 126 , 48873 }, /* 6 MHz */
+	{ 147 , 57019 }, /* 7 MHz */
+	{ 168 , 65164 }, /* 8 MHz */
+};
+
+/* impulse noise parameter */
+/* 36 ??? */
+
+static u16 dib3000mb_reg_impulse_noise[] = { 10,11,12,15,36 };
+
+enum dib3000mb_impulse_noise_type {
+	DIB3000MB_IMPNOISE_OFF,
+	DIB3000MB_IMPNOISE_MOBILE,
+	DIB3000MB_IMPNOISE_FIXED,
+	DIB3000MB_IMPNOISE_DEFAULT
+};
+
+static u16 dib3000mb_impulse_noise_values[][5] = {
+	{ 0x0000, 0x0004, 0x0014, 0x01ff, 0x0399 }, /* off */
+	{ 0x0001, 0x0004, 0x0014, 0x01ff, 0x037b }, /* mobile */
+	{ 0x0001, 0x0004, 0x0020, 0x01bd, 0x0399 }, /* fixed */
+	{ 0x0000, 0x0002, 0x000a, 0x01ff, 0x0399 }, /* default */
+};
+
+/*
+ * Dual Automatic-Gain-Control
+ * - gains RF in tuner (AGC1)
+ * - gains IF after filtering (AGC2)
+ */
+
+/* also from 16 to 18 */
+static u16 dib3000mb_reg_agc_gain[] = {
+	19,20,21,22,23,24,25,26,27,28,29,30,31,32
+};
+
+static u16 dib3000mb_default_agc_gain[] =
+	{ 0x0001, 52429,   623, 128, 166, 195, 61,   /* RF ??? */
+	  0x0001, 53766, 38011,   0,  90,  33, 23 }; /* IF ??? */
+
+/* phase noise */
+/* 36 is set when setting the impulse noise */
+static u16 dib3000mb_reg_phase_noise[] = { 33,34,35,37,38 };
+
+static u16 dib3000mb_default_noise_phase[] = { 2, 544, 0, 5, 4 };
+
+/* lock duration */
+static u16 dib3000mb_reg_lock_duration[] = { 39,40 };
+static u16 dib3000mb_default_lock_duration[] = { 135, 135 };
+
+/* AGC loop bandwidth */
+static u16 dib3000mb_reg_agc_bandwidth[] = { 43,44,45,46,47,48,49,50 };
+
+static u16 dib3000mb_agc_bandwidth_low[]  =
+	{ 2088, 10, 2088, 10, 3448, 5, 3448, 5 };
+static u16 dib3000mb_agc_bandwidth_high[] =
+	{ 2349,  5, 2349,  5, 2586, 2, 2586, 2 };
+
+/*
+ * lock0 definition (coff_lock)
+ */
+#define DIB3000MB_REG_LOCK0_MASK		(    51)
+#define DIB3000MB_LOCK0_DEFAULT				(     4)
+
+/*
+ * lock1 definition (cpil_lock)
+ * for auto search
+ * which values hide behind the lock masks
+ */
+#define DIB3000MB_REG_LOCK1_MASK		(    52)
+#define DIB3000MB_LOCK1_SEARCH_4			(0x0004)
+#define DIB3000MB_LOCK1_SEARCH_2048			(0x0800)
+#define DIB3000MB_LOCK1_DEFAULT				(0x0001)
+
+/*
+ * lock2 definition (fec_lock) */
+#define DIB3000MB_REG_LOCK2_MASK		(    53)
+#define DIB3000MB_LOCK2_DEFAULT				(0x0080)
+
+/*
+ * SEQ ? what was that again ... :)
+ * changes when, inversion, guard time and fft is
+ * either automatically detected or not
+ */
+#define DIB3000MB_REG_SEQ				(    54)
+
+/* bandwidth */
+static u16 dib3000mb_reg_bandwidth[] = { 55,56,57,58,59,60,61,62,63,64,65,66,67 };
+static u16 dib3000mb_bandwidth_6mhz[] =
+	{ 0, 33, 53312, 112, 46635, 563, 36565, 0, 1000, 0, 1010, 1, 45264 };
+
+static u16 dib3000mb_bandwidth_7mhz[] =
+	{ 0, 28, 64421,  96, 39973, 483,  3255, 0, 1000, 0, 1010, 1, 45264 };
+
+static u16 dib3000mb_bandwidth_8mhz[] =
+	{ 0, 25, 23600,  84, 34976, 422, 43808, 0, 1000, 0, 1010, 1, 45264 };
+
+#define DIB3000MB_REG_UNK_68				(    68)
+#define DIB3000MB_UNK_68						(     0)
+
+#define DIB3000MB_REG_UNK_69				(    69)
+#define DIB3000MB_UNK_69						(     0)
+
+#define DIB3000MB_REG_UNK_71				(    71)
+#define DIB3000MB_UNK_71						(     0)
+
+#define DIB3000MB_REG_UNK_77				(    77)
+#define DIB3000MB_UNK_77						(     6)
+
+#define DIB3000MB_REG_UNK_78				(    78)
+#define DIB3000MB_UNK_78						(0x0080)
+
+/* isi */
+#define DIB3000MB_REG_ISI				(    79)
+#define DIB3000MB_ISI_ACTIVATE				(     0)
+#define DIB3000MB_ISI_INHIBIT				(     1)
+
+/* sync impovement */
+#define DIB3000MB_REG_SYNC_IMPROVEMENT	(    84)
+#define DIB3000MB_SYNC_IMPROVE_2K_1_8		(     3)
+#define DIB3000MB_SYNC_IMPROVE_DEFAULT		(     0)
+
+/* phase noise compensation inhibition */
+#define DIB3000MB_REG_PHASE_NOISE		(    87)
+#define DIB3000MB_PHASE_NOISE_DEFAULT	(     0)
+
+#define DIB3000MB_REG_UNK_92				(    92)
+#define DIB3000MB_UNK_92						(0x0080)
+
+#define DIB3000MB_REG_UNK_96				(    96)
+#define DIB3000MB_UNK_96						(0x0010)
+
+#define DIB3000MB_REG_UNK_97				(    97)
+#define DIB3000MB_UNK_97						(0x0009)
+
+/* mobile mode ??? */
+#define DIB3000MB_REG_MOBILE_MODE		(   101)
+#define DIB3000MB_MOBILE_MODE_ON			(     1)
+#define DIB3000MB_MOBILE_MODE_OFF			(     0)
+
+#define DIB3000MB_REG_UNK_106			(   106)
+#define DIB3000MB_UNK_106					(0x0080)
+
+#define DIB3000MB_REG_UNK_107			(   107)
+#define DIB3000MB_UNK_107					(0x0080)
+
+#define DIB3000MB_REG_UNK_108			(   108)
+#define DIB3000MB_UNK_108					(0x0080)
+
+/* fft */
+#define DIB3000MB_REG_UNK_121			(   121)
+#define DIB3000MB_UNK_121_2K				(     7)
+#define DIB3000MB_UNK_121_DEFAULT			(     5)
+
+#define DIB3000MB_REG_UNK_122			(   122)
+#define DIB3000MB_UNK_122					(  2867)
+
+/* QAM for mobile mode */
+#define DIB3000MB_REG_MOBILE_MODE_QAM	(   126)
+#define DIB3000MB_MOBILE_MODE_QAM_64		(     3)
+#define DIB3000MB_MOBILE_MODE_QAM_QPSK_16	(     1)
+#define DIB3000MB_MOBILE_MODE_QAM_OFF		(     0)
+
+/*
+ * data diversity when having more than one chip on-board
+ * see also DIB3000MB_OUTPUT_MODE_DATA_DIVERSITY
+ */
+#define DIB3000MB_REG_DATA_IN_DIVERSITY		(   127)
+#define DIB3000MB_DATA_DIVERSITY_IN_OFF			(     0)
+#define DIB3000MB_DATA_DIVERSITY_IN_ON			(     2)
+
+/* vit hrch */
+#define DIB3000MB_REG_VIT_HRCH			(   128)
+
+/* vit code rate */
+#define DIB3000MB_REG_VIT_CODE_RATE		(   129)
+
+/* vit select hp */
+#define DIB3000MB_REG_VIT_HP			(   130)
+
+/* time frame for Bit-Error-Rate calculation */
+#define DIB3000MB_REG_BERLEN			(   135)
+#define DIB3000MB_BERLEN_LONG				(     0)
+#define DIB3000MB_BERLEN_DEFAULT			(     1)
+#define DIB3000MB_BERLEN_MEDIUM				(     2)
+#define DIB3000MB_BERLEN_SHORT				(     3)
+
+/* 142 - 152 FIFO parameters
+ * which is what ?
+ */
+
+#define DIB3000MB_REG_FIFO_142			(   142)
+#define DIB3000MB_FIFO_142					(     0)
+
+/* MPEG2 TS output mode */
+#define DIB3000MB_REG_MPEG2_OUT_MODE	(   143)
+#define DIB3000MB_MPEG2_OUT_MODE_204		(     0)
+#define DIB3000MB_MPEG2_OUT_MODE_188		(     1)
+
+#define DIB3000MB_REG_PID_PARSE			(   144)
+#define DIB3000MB_PID_PARSE_INHIBIT		(     0)
+#define DIB3000MB_PID_PARSE_ACTIVATE	(     1)
+
+#define DIB3000MB_REG_FIFO				(   145)
+#define DIB3000MB_FIFO_INHIBIT				(     1)
+#define DIB3000MB_FIFO_ACTIVATE				(     0)
+
+#define DIB3000MB_REG_FIFO_146			(   146)
+#define DIB3000MB_FIFO_146					(     3)
+
+#define DIB3000MB_REG_FIFO_147			(   147)
+#define DIB3000MB_FIFO_147					(0x0100)
+
+/*
+ * pidfilter
+ * it is not a hardware pidfilter but a filter which drops all pids
+ * except the ones set. Necessary because of the limited USB1.1 bandwidth.
+ * regs 153-168
+ */
+
+#define DIB3000MB_REG_FIRST_PID			(   153)
+#define DIB3000MB_NUM_PIDS				(    16)
+
+/*
+ * output mode
+ * USB devices have to use 'slave'-mode
+ * see also DIB3000MB_REG_ELECT_OUT_MODE
+ */
+#define DIB3000MB_REG_OUTPUT_MODE		(   169)
+#define DIB3000MB_OUTPUT_MODE_GATED_CLK		(     0)
+#define DIB3000MB_OUTPUT_MODE_CONT_CLK		(     1)
+#define DIB3000MB_OUTPUT_MODE_SERIAL		(     2)
+#define DIB3000MB_OUTPUT_MODE_DATA_DIVERSITY	(     5)
+#define DIB3000MB_OUTPUT_MODE_SLAVE			(     6)
+
+/* irq event mask */
+#define DIB3000MB_REG_IRQ_EVENT_MASK		(   170)
+#define DIB3000MB_IRQ_EVENT_MASK				(     0)
+
+/* filter coefficients */
+static u16 dib3000mb_reg_filter_coeffs[] = {
+	171, 172, 173, 174, 175, 176, 177, 178,
+	179, 180, 181, 182, 183, 184, 185, 186,
+	188, 189, 190, 191, 192, 194
+};
+
+static u16 dib3000mb_filter_coeffs[] = {
+	 226,  160,   29,
+	 979,  998,   19,
+	  22, 1019, 1006,
+	1022,   12,    6,
+	1017, 1017,    3,
+	   6,       1019,
+	1021,    2,    3,
+	   1,          0,
+};
+
+/*
+ * mobile algorithm (when you are moving with your device)
+ * but not faster than 90 km/h
+ */
+#define DIB3000MB_REG_MOBILE_ALGO		(   195)
+#define DIB3000MB_MOBILE_ALGO_ON			(     0)
+#define DIB3000MB_MOBILE_ALGO_OFF			(     1)
+
+/* multiple demodulators algorithm */
+#define DIB3000MB_REG_MULTI_DEMOD_MSB	(   206)
+#define DIB3000MB_REG_MULTI_DEMOD_LSB	(   207)
+
+/* terminator, no more demods */
+#define DIB3000MB_MULTI_DEMOD_MSB			( 32767)
+#define DIB3000MB_MULTI_DEMOD_LSB			(  4095)
+
+/* bring the device into a known  */
+#define DIB3000MB_REG_RESET_DEVICE		(  1024)
+#define DIB3000MB_RESET_DEVICE				(0x812c)
+#define DIB3000MB_RESET_DEVICE_RST			(     0)
+
+/* hardware clock configuration */
+#define DIB3000MB_REG_CLOCK				(  1027)
+#define DIB3000MB_CLOCK_DEFAULT				(0x9000)
+#define DIB3000MB_CLOCK_DIVERSITY			(0x92b0)
+
+/* power down config */
+#define DIB3000MB_REG_POWER_CONTROL		(  1028)
+#define DIB3000MB_POWER_DOWN				(     1)
+#define DIB3000MB_POWER_UP					(     0)
+
+/* electrical output mode */
+#define DIB3000MB_REG_ELECT_OUT_MODE	(  1029)
+#define DIB3000MB_ELECT_OUT_MODE_OFF		(     0)
+#define DIB3000MB_ELECT_OUT_MODE_ON			(     1)
+
+/* set the tuner i2c address */
+#define DIB3000MB_REG_TUNER				(  1089)
+
+/* monitoring registers (read only) */
+
+/* agc loop locked (size: 1) */
+#define DIB3000MB_REG_AGC_LOCK			(   324)
+
+/* agc power (size: 16) */
+#define DIB3000MB_REG_AGC_POWER			(   325)
+
+/* agc1 value (16) */
+#define DIB3000MB_REG_AGC1_VALUE		(   326)
+
+/* agc2 value (16) */
+#define DIB3000MB_REG_AGC2_VALUE		(   327)
+
+/* total RF power (16), can be used for signal strength */
+#define DIB3000MB_REG_RF_POWER			(   328)
+
+/* dds_frequency with offset (24) */
+#define DIB3000MB_REG_DDS_VALUE_MSB		(   339)
+#define DIB3000MB_REG_DDS_VALUE_LSB		(   340)
+
+/* timing offset signed (24) */
+#define DIB3000MB_REG_TIMING_OFFSET_MSB	(   341)
+#define DIB3000MB_REG_TIMING_OFFSET_LSB	(   342)
+
+/* fft start position (13) */
+#define DIB3000MB_REG_FFT_WINDOW_POS	(   353)
+
+/* carriers locked (1) */
+#define DIB3000MB_REG_CARRIER_LOCK		(   355)
+
+/* noise power (24) */
+#define DIB3000MB_REG_NOISE_POWER_MSB	(   372)
+#define DIB3000MB_REG_NOISE_POWER_LSB	(   373)
+
+#define DIB3000MB_REG_MOBILE_NOISE_MSB	(   374)
+#define DIB3000MB_REG_MOBILE_NOISE_LSB	(   375)
+
+/*
+ * signal power (16), this and the above can be
+ * used to calculate the signal/noise - ratio
+ */
+#define DIB3000MB_REG_SIGNAL_POWER		(   380)
+
+/* mer (24) */
+#define DIB3000MB_REG_MER_MSB			(   381)
+#define DIB3000MB_REG_MER_LSB			(   382)
+
+/*
+ * Transmission Parameter Signalling (TPS)
+ * the following registers can be used to get TPS-information.
+ * The values are according to the DVB-T standard.
+ */
+
+/* TPS locked (1) */
+#define DIB3000MB_REG_TPS_LOCK			(   394)
+
+/* QAM from TPS (2) (values according to DIB3000MB_REG_QAM) */
+#define DIB3000MB_REG_TPS_QAM			(   398)
+
+/* hierarchy from TPS (1) */
+#define DIB3000MB_REG_TPS_HRCH			(   399)
+
+/* alpha from TPS (3) (values according to DIB3000MB_REG_VIT_ALPHA) */
+#define DIB3000MB_REG_TPS_VIT_ALPHA		(   400)
+
+/* code rate high priority from TPS (3) (values according to DIB3000MB_FEC_*) */
+#define DIB3000MB_REG_TPS_CODE_RATE_HP	(   401)
+
+/* code rate low priority from TPS (3) if DIB3000MB_REG_TPS_VIT_ALPHA */
+#define DIB3000MB_REG_TPS_CODE_RATE_LP	(   402)
+
+/* guard time from TPS (2) (values according to DIB3000MB_REG_GUARD_TIME */
+#define DIB3000MB_REG_TPS_GUARD_TIME	(   403)
+
+/* fft size from TPS (2) (values according to DIB3000MB_REG_FFT) */
+#define DIB3000MB_REG_TPS_FFT			(   404)
+
+/* cell id from TPS (16) */
+#define DIB3000MB_REG_TPS_CELL_ID		(   406)
+
+/* TPS (68) */
+#define DIB3000MB_REG_TPS_1				(   408)
+#define DIB3000MB_REG_TPS_2				(   409)
+#define DIB3000MB_REG_TPS_3				(   410)
+#define DIB3000MB_REG_TPS_4				(   411)
+#define DIB3000MB_REG_TPS_5				(   412)
+
+/* bit error rate (before RS correction) (21) */
+#define DIB3000MB_REG_BER_MSB			(   414)
+#define DIB3000MB_REG_BER_LSB			(   415)
+
+/* packet error rate (uncorrected TS packets) (16) */
+#define DIB3000MB_REG_PACKET_ERROR_RATE	(   417)
+
+/* uncorrected packet count (16) */
+#define DIB3000MB_REG_UNC				(   420)
+
+/* viterbi locked (1) */
+#define DIB3000MB_REG_VIT_LCK			(   421)
+
+/* viterbi inidcator (16) */
+#define DIB3000MB_REG_VIT_INDICATOR		(   422)
+
+/* transport stream sync lock (1) */
+#define DIB3000MB_REG_TS_SYNC_LOCK		(   423)
+
+/* transport stream RS lock (1) */
+#define DIB3000MB_REG_TS_RS_LOCK		(   424)
+
+/* lock mask 0 value (1) */
+#define DIB3000MB_REG_LOCK0_VALUE		(   425)
+
+/* lock mask 1 value (1) */
+#define DIB3000MB_REG_LOCK1_VALUE		(   426)
+
+/* lock mask 2 value (1) */
+#define DIB3000MB_REG_LOCK2_VALUE		(   427)
+
+/* interrupt pending for auto search */
+#define DIB3000MB_REG_AS_IRQ_PENDING	(   434)
+
+#endif