Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 368 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/drxk_hard.h b/drivers/media/dvb-frontends/drxk_hard.h
new file mode 100644
index 000000000..a850a876d
--- /dev/null
+++ b/drivers/media/dvb-frontends/drxk_hard.h
@@ -0,0 +1,368 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include "drxk_map.h"
+
+#define DRXK_VERSION_MAJOR 0
+#define DRXK_VERSION_MINOR 9
+#define DRXK_VERSION_PATCH 4300
+
+#define HI_I2C_DELAY        42
+#define HI_I2C_BRIDGE_DELAY 350
+#define DRXK_MAX_RETRIES    100
+
+#define DRIVER_4400 1
+
+#define DRXX_JTAGID   0x039210D9
+#define DRXX_J_JTAGID 0x239310D9
+#define DRXX_K_JTAGID 0x039210D9
+
+#define DRX_UNKNOWN     254
+#define DRX_AUTO        255
+
+#define DRX_SCU_READY   0
+#define DRXK_MAX_WAITTIME (200)
+#define SCU_RESULT_OK      0
+#define SCU_RESULT_SIZE   -4
+#define SCU_RESULT_INVPAR -3
+#define SCU_RESULT_UNKSTD -2
+#define SCU_RESULT_UNKCMD -1
+
+#ifndef DRXK_OFDM_TR_SHUTDOWN_TIMEOUT
+#define DRXK_OFDM_TR_SHUTDOWN_TIMEOUT (200)
+#endif
+
+#define DRXK_8VSB_MPEG_BIT_RATE     19392658UL  /*bps*/
+#define DRXK_DVBT_MPEG_BIT_RATE     32000000UL  /*bps*/
+#define DRXK_QAM16_MPEG_BIT_RATE    27000000UL  /*bps*/
+#define DRXK_QAM32_MPEG_BIT_RATE    33000000UL  /*bps*/
+#define DRXK_QAM64_MPEG_BIT_RATE    40000000UL  /*bps*/
+#define DRXK_QAM128_MPEG_BIT_RATE   46000000UL  /*bps*/
+#define DRXK_QAM256_MPEG_BIT_RATE   52000000UL  /*bps*/
+#define DRXK_MAX_MPEG_BIT_RATE      52000000UL  /*bps*/
+
+#define   IQM_CF_OUT_ENA_OFDM__M                                            0x4
+#define     IQM_FS_ADJ_SEL_B_QAM                                            0x1
+#define     IQM_FS_ADJ_SEL_B_OFF                                            0x0
+#define     IQM_FS_ADJ_SEL_B_VSB                                            0x2
+#define     IQM_RC_ADJ_SEL_B_OFF                                            0x0
+#define     IQM_RC_ADJ_SEL_B_QAM                                            0x1
+#define     IQM_RC_ADJ_SEL_B_VSB                                            0x2
+
+enum operation_mode {
+	OM_NONE,
+	OM_QAM_ITU_A,
+	OM_QAM_ITU_B,
+	OM_QAM_ITU_C,
+	OM_DVBT
+};
+
+enum drx_power_mode {
+	DRX_POWER_UP = 0,
+	DRX_POWER_MODE_1,
+	DRX_POWER_MODE_2,
+	DRX_POWER_MODE_3,
+	DRX_POWER_MODE_4,
+	DRX_POWER_MODE_5,
+	DRX_POWER_MODE_6,
+	DRX_POWER_MODE_7,
+	DRX_POWER_MODE_8,
+
+	DRX_POWER_MODE_9,
+	DRX_POWER_MODE_10,
+	DRX_POWER_MODE_11,
+	DRX_POWER_MODE_12,
+	DRX_POWER_MODE_13,
+	DRX_POWER_MODE_14,
+	DRX_POWER_MODE_15,
+	DRX_POWER_MODE_16,
+	DRX_POWER_DOWN = 255
+};
+
+
+/* Intermediate power mode for DRXK, power down OFDM clock domain */
+#ifndef DRXK_POWER_DOWN_OFDM
+#define DRXK_POWER_DOWN_OFDM        DRX_POWER_MODE_1
+#endif
+
+/* Intermediate power mode for DRXK, power down core (sysclk) */
+#ifndef DRXK_POWER_DOWN_CORE
+#define DRXK_POWER_DOWN_CORE        DRX_POWER_MODE_9
+#endif
+
+/* Intermediate power mode for DRXK, power down pll (only osc runs) */
+#ifndef DRXK_POWER_DOWN_PLL
+#define DRXK_POWER_DOWN_PLL         DRX_POWER_MODE_10
+#endif
+
+
+enum agc_ctrl_mode {
+	DRXK_AGC_CTRL_AUTO = 0,
+	DRXK_AGC_CTRL_USER,
+	DRXK_AGC_CTRL_OFF
+};
+
+enum e_drxk_state {
+	DRXK_UNINITIALIZED = 0,
+	DRXK_STOPPED,
+	DRXK_DTV_STARTED,
+	DRXK_ATV_STARTED,
+	DRXK_POWERED_DOWN,
+	DRXK_NO_DEV			/* If drxk init failed */
+};
+
+enum e_drxk_coef_array_index {
+	DRXK_COEF_IDX_MN = 0,
+	DRXK_COEF_IDX_FM    ,
+	DRXK_COEF_IDX_L     ,
+	DRXK_COEF_IDX_LP    ,
+	DRXK_COEF_IDX_BG    ,
+	DRXK_COEF_IDX_DK    ,
+	DRXK_COEF_IDX_I     ,
+	DRXK_COEF_IDX_MAX
+};
+enum e_drxk_sif_attenuation {
+	DRXK_SIF_ATTENUATION_0DB,
+	DRXK_SIF_ATTENUATION_3DB,
+	DRXK_SIF_ATTENUATION_6DB,
+	DRXK_SIF_ATTENUATION_9DB
+};
+enum e_drxk_constellation {
+	DRX_CONSTELLATION_BPSK = 0,
+	DRX_CONSTELLATION_QPSK,
+	DRX_CONSTELLATION_PSK8,
+	DRX_CONSTELLATION_QAM16,
+	DRX_CONSTELLATION_QAM32,
+	DRX_CONSTELLATION_QAM64,
+	DRX_CONSTELLATION_QAM128,
+	DRX_CONSTELLATION_QAM256,
+	DRX_CONSTELLATION_QAM512,
+	DRX_CONSTELLATION_QAM1024,
+	DRX_CONSTELLATION_UNKNOWN = DRX_UNKNOWN,
+	DRX_CONSTELLATION_AUTO    = DRX_AUTO
+};
+enum e_drxk_interleave_mode {
+	DRXK_QAM_I12_J17    = 16,
+	DRXK_QAM_I_UNKNOWN  = DRX_UNKNOWN
+};
+enum {
+	DRXK_SPIN_A1 = 0,
+	DRXK_SPIN_A2,
+	DRXK_SPIN_A3,
+	DRXK_SPIN_UNKNOWN
+};
+
+enum drxk_cfg_dvbt_sqi_speed {
+	DRXK_DVBT_SQI_SPEED_FAST = 0,
+	DRXK_DVBT_SQI_SPEED_MEDIUM,
+	DRXK_DVBT_SQI_SPEED_SLOW,
+	DRXK_DVBT_SQI_SPEED_UNKNOWN = DRX_UNKNOWN
+} ;
+
+enum drx_fftmode_t {
+	DRX_FFTMODE_2K = 0,
+	DRX_FFTMODE_4K,
+	DRX_FFTMODE_8K,
+	DRX_FFTMODE_UNKNOWN = DRX_UNKNOWN,
+	DRX_FFTMODE_AUTO    = DRX_AUTO
+};
+
+enum drxmpeg_str_width_t {
+	DRX_MPEG_STR_WIDTH_1,
+	DRX_MPEG_STR_WIDTH_8
+};
+
+enum drx_qam_lock_range_t {
+	DRX_QAM_LOCKRANGE_NORMAL,
+	DRX_QAM_LOCKRANGE_EXTENDED
+};
+
+struct drxk_cfg_dvbt_echo_thres_t {
+	u16             threshold;
+	enum drx_fftmode_t      fft_mode;
+} ;
+
+struct s_cfg_agc {
+	enum agc_ctrl_mode     ctrl_mode;        /* off, user, auto */
+	u16            output_level;     /* range dependent on AGC */
+	u16            min_output_level;  /* range dependent on AGC */
+	u16            max_output_level;  /* range dependent on AGC */
+	u16            speed;           /* range dependent on AGC */
+	u16            top;             /* rf-agc take over point */
+	u16            cut_off_current;   /* rf-agc is accelerated if output current
+					   is below cut-off current */
+	u16            ingain_tgt_max;
+	u16            fast_clip_ctrl_delay;
+};
+
+struct s_cfg_pre_saw {
+	u16        reference; /* pre SAW reference value, range 0 .. 31 */
+	bool          use_pre_saw; /* TRUE algorithms must use pre SAW sense */
+};
+
+struct drxk_ofdm_sc_cmd_t {
+	u16 cmd;        /* Command number */
+	u16 subcmd;     /* Sub-command parameter*/
+	u16 param0;     /* General purpous param */
+	u16 param1;     /* General purpous param */
+	u16 param2;     /* General purpous param */
+	u16 param3;     /* General purpous param */
+	u16 param4;     /* General purpous param */
+};
+
+struct drxk_state {
+	struct dvb_frontend frontend;
+	struct dtv_frontend_properties props;
+	struct device *dev;
+
+	struct i2c_adapter *i2c;
+	u8     demod_address;
+	void  *priv;
+
+	struct mutex mutex;
+
+	u32    m_instance;           /* Channel 1,2,3 or 4 */
+
+	int    m_chunk_size;
+	u8 chunk[256];
+
+	bool   m_has_lna;
+	bool   m_has_dvbt;
+	bool   m_has_dvbc;
+	bool   m_has_audio;
+	bool   m_has_atv;
+	bool   m_has_oob;
+	bool   m_has_sawsw;         /* TRUE if mat_tx is available */
+	bool   m_has_gpio1;         /* TRUE if mat_rx is available */
+	bool   m_has_gpio2;         /* TRUE if GPIO is available */
+	bool   m_has_irqn;          /* TRUE if IRQN is available */
+	u16    m_osc_clock_freq;
+	u16    m_hi_cfg_timing_div;
+	u16    m_hi_cfg_bridge_delay;
+	u16    m_hi_cfg_wake_up_key;
+	u16    m_hi_cfg_timeout;
+	u16    m_hi_cfg_ctrl;
+	s32    m_sys_clock_freq;      /* system clock frequency in kHz */
+
+	enum e_drxk_state    m_drxk_state;      /* State of Drxk (init,stopped,started) */
+	enum operation_mode m_operation_mode;  /* digital standards */
+	struct s_cfg_agc     m_vsb_rf_agc_cfg;    /* settings for VSB RF-AGC */
+	struct s_cfg_agc     m_vsb_if_agc_cfg;    /* settings for VSB IF-AGC */
+	u16                m_vsb_pga_cfg;      /* settings for VSB PGA */
+	struct s_cfg_pre_saw  m_vsb_pre_saw_cfg;   /* settings for pre SAW sense */
+	s32    m_Quality83percent;  /* MER level (*0.1 dB) for 83% quality indication */
+	s32    m_Quality93percent;  /* MER level (*0.1 dB) for 93% quality indication */
+	bool   m_smart_ant_inverted;
+	bool   m_b_debug_enable_bridge;
+	bool   m_b_p_down_open_bridge;  /* only open DRXK bridge before power-down once it has been accessed */
+	bool   m_b_power_down;        /* Power down when not used */
+
+	u32    m_iqm_fs_rate_ofs;      /* frequency shift as written to DRXK register (28bit fixpoint) */
+
+	bool   m_enable_mpeg_output;  /* If TRUE, enable MPEG output */
+	bool   m_insert_rs_byte;      /* If TRUE, insert RS byte */
+	bool   m_enable_parallel;    /* If TRUE, parallel out otherwise serial */
+	bool   m_invert_data;        /* If TRUE, invert DATA signals */
+	bool   m_invert_err;         /* If TRUE, invert ERR signal */
+	bool   m_invert_str;         /* If TRUE, invert STR signals */
+	bool   m_invert_val;         /* If TRUE, invert VAL signals */
+	bool   m_invert_clk;         /* If TRUE, invert CLK signals */
+	bool   m_dvbc_static_clk;
+	bool   m_dvbt_static_clk;     /* If TRUE, static MPEG clockrate will
+					 be used, otherwise clockrate will
+					 adapt to the bitrate of the TS */
+	u32    m_dvbt_bitrate;
+	u32    m_dvbc_bitrate;
+
+	u8     m_ts_data_strength;
+	u8     m_ts_clockk_strength;
+
+	bool   m_itut_annex_c;      /* If true, uses ITU-T DVB-C Annex C, instead of Annex A */
+
+	enum drxmpeg_str_width_t  m_width_str;    /* MPEG start width */
+	u32    m_mpeg_ts_static_bitrate;          /* Maximum bitrate in b/s in case
+						    static clockrate is selected */
+
+	/* LARGE_INTEGER   m_startTime; */     /* Contains the time of the last demod start */
+	s32    m_mpeg_lock_time_out;      /* WaitForLockStatus Timeout (counts from start time) */
+	s32    m_demod_lock_time_out;     /* WaitForLockStatus Timeout (counts from start time) */
+
+	bool   m_disable_te_ihandling;
+
+	bool   m_rf_agc_pol;
+	bool   m_if_agc_pol;
+
+	struct s_cfg_agc    m_atv_rf_agc_cfg;  /* settings for ATV RF-AGC */
+	struct s_cfg_agc    m_atv_if_agc_cfg;  /* settings for ATV IF-AGC */
+	struct s_cfg_pre_saw m_atv_pre_saw_cfg; /* settings for ATV pre SAW sense */
+	bool              m_phase_correction_bypass;
+	s16               m_atv_top_vid_peak;
+	u16               m_atv_top_noise_th;
+	enum e_drxk_sif_attenuation m_sif_attenuation;
+	bool              m_enable_cvbs_output;
+	bool              m_enable_sif_output;
+	bool              m_b_mirror_freq_spect;
+	enum e_drxk_constellation  m_constellation; /* constellation type of the channel */
+	u32               m_curr_symbol_rate;       /* Current QAM symbol rate */
+	struct s_cfg_agc    m_qam_rf_agc_cfg;          /* settings for QAM RF-AGC */
+	struct s_cfg_agc    m_qam_if_agc_cfg;          /* settings for QAM IF-AGC */
+	u16               m_qam_pga_cfg;            /* settings for QAM PGA */
+	struct s_cfg_pre_saw m_qam_pre_saw_cfg;         /* settings for QAM pre SAW sense */
+	enum e_drxk_interleave_mode m_qam_interleave_mode; /* QAM Interleave mode */
+	u16               m_fec_rs_plen;
+	u16               m_fec_rs_prescale;
+
+	enum drxk_cfg_dvbt_sqi_speed m_sqi_speed;
+
+	u16               m_gpio;
+	u16               m_gpio_cfg;
+
+	struct s_cfg_agc    m_dvbt_rf_agc_cfg;     /* settings for QAM RF-AGC */
+	struct s_cfg_agc    m_dvbt_if_agc_cfg;     /* settings for QAM IF-AGC */
+	struct s_cfg_pre_saw m_dvbt_pre_saw_cfg;    /* settings for QAM pre SAW sense */
+
+	u16               m_agcfast_clip_ctrl_delay;
+	bool              m_adc_comp_passed;
+	u16               m_adcCompCoef[64];
+	u16               m_adc_state;
+
+	u8               *m_microcode;
+	int               m_microcode_length;
+	bool		  m_drxk_a3_rom_code;
+	bool              m_drxk_a3_patch_code;
+
+	bool              m_rfmirror;
+	u8                m_device_spin;
+	u32               m_iqm_rc_rate;
+
+	enum drx_power_mode m_current_power_mode;
+
+	/* when true, avoids other devices to use the I2C bus */
+	bool		  drxk_i2c_exclusive_lock;
+
+	/*
+	 * Configurable parameters at the driver. They stores the values found
+	 * at struct drxk_config.
+	 */
+
+	u16	uio_mask;	/* Bits used by UIO */
+
+	bool	enable_merr_cfg;
+	bool	single_master;
+	bool	no_i2c_bridge;
+	bool	antenna_dvbt;
+	u16	antenna_gpio;
+
+	enum fe_status fe_status;
+
+	/* Firmware */
+	const char *microcode_name;
+	struct completion fw_wait_load;
+	const struct firmware *fw;
+	int qam_demod_parameter_count;
+};
+
+#define NEVER_LOCK 0
+#define NOT_LOCKED 1
+#define DEMOD_LOCK 2
+#define FEC_LOCK   3
+#define MPEG_LOCK  4
+