Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 331 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/ec100.c b/drivers/media/dvb-frontends/ec100.c
new file mode 100644
index 000000000..03bd80666
--- /dev/null
+++ b/drivers/media/dvb-frontends/ec100.c
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * E3C EC100 demodulator driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ */
+
+#include <media/dvb_frontend.h>
+#include "ec100.h"
+
+struct ec100_state {
+	struct i2c_adapter *i2c;
+	struct dvb_frontend frontend;
+	struct ec100_config config;
+
+	u16 ber;
+};
+
+/* write single register */
+static int ec100_write_reg(struct ec100_state *state, u8 reg, u8 val)
+{
+	int ret;
+	u8 buf[2] = {reg, val};
+	struct i2c_msg msg[1] = {
+		{
+			.addr = state->config.demod_address,
+			.flags = 0,
+			.len = sizeof(buf),
+			.buf = buf,
+		}
+	};
+
+	ret = i2c_transfer(state->i2c, msg, 1);
+	if (ret == 1) {
+		ret = 0;
+	} else {
+		dev_warn(&state->i2c->dev, "%s: i2c wr failed=%d reg=%02x\n",
+				KBUILD_MODNAME, ret, reg);
+		ret = -EREMOTEIO;
+	}
+
+	return ret;
+}
+
+/* read single register */
+static int ec100_read_reg(struct ec100_state *state, u8 reg, u8 *val)
+{
+	int ret;
+	struct i2c_msg msg[2] = {
+		{
+			.addr = state->config.demod_address,
+			.flags = 0,
+			.len = 1,
+			.buf = &reg
+		}, {
+			.addr = state->config.demod_address,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = val
+		}
+	};
+
+	ret = i2c_transfer(state->i2c, msg, 2);
+	if (ret == 2) {
+		ret = 0;
+	} else {
+		dev_warn(&state->i2c->dev, "%s: i2c rd failed=%d reg=%02x\n",
+				KBUILD_MODNAME, ret, reg);
+		ret = -EREMOTEIO;
+	}
+
+	return ret;
+}
+
+static int ec100_set_frontend(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	struct ec100_state *state = fe->demodulator_priv;
+	int ret;
+	u8 tmp, tmp2;
+
+	dev_dbg(&state->i2c->dev, "%s: frequency=%d bandwidth_hz=%d\n",
+			__func__, c->frequency, c->bandwidth_hz);
+
+	/* program tuner */
+	if (fe->ops.tuner_ops.set_params)
+		fe->ops.tuner_ops.set_params(fe);
+
+	ret = ec100_write_reg(state, 0x04, 0x06);
+	if (ret)
+		goto error;
+	ret = ec100_write_reg(state, 0x67, 0x58);
+	if (ret)
+		goto error;
+	ret = ec100_write_reg(state, 0x05, 0x18);
+	if (ret)
+		goto error;
+
+	/* reg/bw |   6  |   7  |   8
+	   -------+------+------+------
+	   A 0x1b | 0xa1 | 0xe7 | 0x2c
+	   A 0x1c | 0x55 | 0x63 | 0x72
+	   -------+------+------+------
+	   B 0x1b | 0xb7 | 0x00 | 0x49
+	   B 0x1c | 0x55 | 0x64 | 0x72 */
+
+	switch (c->bandwidth_hz) {
+	case 6000000:
+		tmp = 0xb7;
+		tmp2 = 0x55;
+		break;
+	case 7000000:
+		tmp = 0x00;
+		tmp2 = 0x64;
+		break;
+	case 8000000:
+	default:
+		tmp = 0x49;
+		tmp2 = 0x72;
+	}
+
+	ret = ec100_write_reg(state, 0x1b, tmp);
+	if (ret)
+		goto error;
+	ret = ec100_write_reg(state, 0x1c, tmp2);
+	if (ret)
+		goto error;
+
+	ret = ec100_write_reg(state, 0x0c, 0xbb); /* if freq */
+	if (ret)
+		goto error;
+	ret = ec100_write_reg(state, 0x0d, 0x31); /* if freq */
+	if (ret)
+		goto error;
+
+	ret = ec100_write_reg(state, 0x08, 0x24);
+	if (ret)
+		goto error;
+
+	ret = ec100_write_reg(state, 0x00, 0x00); /* go */
+	if (ret)
+		goto error;
+	ret = ec100_write_reg(state, 0x00, 0x20); /* go */
+	if (ret)
+		goto error;
+
+	return ret;
+error:
+	dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+static int ec100_get_tune_settings(struct dvb_frontend *fe,
+	struct dvb_frontend_tune_settings *fesettings)
+{
+	fesettings->min_delay_ms = 300;
+	fesettings->step_size = 0;
+	fesettings->max_drift = 0;
+
+	return 0;
+}
+
+static int ec100_read_status(struct dvb_frontend *fe, enum fe_status *status)
+{
+	struct ec100_state *state = fe->demodulator_priv;
+	int ret;
+	u8 tmp;
+	*status = 0;
+
+	ret = ec100_read_reg(state, 0x42, &tmp);
+	if (ret)
+		goto error;
+
+	if (tmp & 0x80) {
+		/* bit7 set - have lock */
+		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI |
+			FE_HAS_SYNC | FE_HAS_LOCK;
+	} else {
+		ret = ec100_read_reg(state, 0x01, &tmp);
+		if (ret)
+			goto error;
+
+		if (tmp & 0x10) {
+			/* bit4 set - have signal */
+			*status |= FE_HAS_SIGNAL;
+			if (!(tmp & 0x01)) {
+				/* bit0 clear - have ~valid signal */
+				*status |= FE_HAS_CARRIER |  FE_HAS_VITERBI;
+			}
+		}
+	}
+
+	return ret;
+error:
+	dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+static int ec100_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+	struct ec100_state *state = fe->demodulator_priv;
+	int ret;
+	u8 tmp, tmp2;
+	u16 ber2;
+
+	*ber = 0;
+
+	ret = ec100_read_reg(state, 0x65, &tmp);
+	if (ret)
+		goto error;
+	ret = ec100_read_reg(state, 0x66, &tmp2);
+	if (ret)
+		goto error;
+
+	ber2 = (tmp2 << 8) | tmp;
+
+	/* if counter overflow or clear */
+	if (ber2 < state->ber)
+		*ber = ber2;
+	else
+		*ber = ber2 - state->ber;
+
+	state->ber = ber2;
+
+	return ret;
+error:
+	dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+static int ec100_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+	struct ec100_state *state = fe->demodulator_priv;
+	int ret;
+	u8 tmp;
+
+	ret = ec100_read_reg(state, 0x24, &tmp);
+	if (ret) {
+		*strength = 0;
+		goto error;
+	}
+
+	*strength = ((tmp << 8) | tmp);
+
+	return ret;
+error:
+	dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+static int ec100_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+	*snr = 0;
+	return 0;
+}
+
+static int ec100_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+	*ucblocks = 0;
+	return 0;
+}
+
+static void ec100_release(struct dvb_frontend *fe)
+{
+	struct ec100_state *state = fe->demodulator_priv;
+	kfree(state);
+}
+
+static const struct dvb_frontend_ops ec100_ops;
+
+struct dvb_frontend *ec100_attach(const struct ec100_config *config,
+	struct i2c_adapter *i2c)
+{
+	int ret;
+	struct ec100_state *state = NULL;
+	u8 tmp;
+
+	/* allocate memory for the internal state */
+	state = kzalloc(sizeof(struct ec100_state), GFP_KERNEL);
+	if (state == NULL)
+		goto error;
+
+	/* setup the state */
+	state->i2c = i2c;
+	memcpy(&state->config, config, sizeof(struct ec100_config));
+
+	/* check if the demod is there */
+	ret = ec100_read_reg(state, 0x33, &tmp);
+	if (ret || tmp != 0x0b)
+		goto error;
+
+	/* create dvb_frontend */
+	memcpy(&state->frontend.ops, &ec100_ops,
+		sizeof(struct dvb_frontend_ops));
+	state->frontend.demodulator_priv = state;
+
+	return &state->frontend;
+error:
+	kfree(state);
+	return NULL;
+}
+EXPORT_SYMBOL(ec100_attach);
+
+static const struct dvb_frontend_ops ec100_ops = {
+	.delsys = { SYS_DVBT },
+	.info = {
+		.name = "E3C EC100 DVB-T",
+		.caps =
+			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+			FE_CAN_QPSK | FE_CAN_QAM_16 |
+			FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+			FE_CAN_TRANSMISSION_MODE_AUTO |
+			FE_CAN_GUARD_INTERVAL_AUTO |
+			FE_CAN_HIERARCHY_AUTO |
+			FE_CAN_MUTE_TS
+	},
+
+	.release = ec100_release,
+	.set_frontend = ec100_set_frontend,
+	.get_tune_settings = ec100_get_tune_settings,
+	.read_status = ec100_read_status,
+	.read_ber = ec100_read_ber,
+	.read_signal_strength = ec100_read_signal_strength,
+	.read_snr = ec100_read_snr,
+	.read_ucblocks = ec100_read_ucblocks,
+};
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("E3C EC100 DVB-T demodulator driver");
+MODULE_LICENSE("GPL");