Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 390 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/s5h1432.c b/drivers/media/dvb-frontends/s5h1432.c
new file mode 100644
index 000000000..956e8ee4b
--- /dev/null
+++ b/drivers/media/dvb-frontends/s5h1432.c
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Samsung s5h1432 DVB-T demodulator driver
+ *
+ *  Copyright (C) 2009 Bill Liu <Bill.Liu@Conexant.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <media/dvb_frontend.h>
+#include "s5h1432.h"
+
+struct s5h1432_state {
+
+	struct i2c_adapter *i2c;
+
+	/* configuration settings */
+	const struct s5h1432_config *config;
+
+	struct dvb_frontend frontend;
+
+	enum fe_modulation current_modulation;
+	unsigned int first_tune:1;
+
+	u32 current_frequency;
+	int if_freq;
+
+	u8 inversion;
+};
+
+static int debug;
+
+#define dprintk(arg...) do {	\
+	if (debug)		\
+		printk(arg);	\
+	} while (0)
+
+static int s5h1432_writereg(struct s5h1432_state *state,
+			    u8 addr, u8 reg, u8 data)
+{
+	int ret;
+	u8 buf[] = { reg, data };
+
+	struct i2c_msg msg = {.addr = addr, .flags = 0, .buf = buf, .len = 2 };
+
+	ret = i2c_transfer(state->i2c, &msg, 1);
+
+	if (ret != 1)
+		printk(KERN_ERR "%s: writereg error 0x%02x 0x%02x 0x%04x, ret == %i)\n",
+		       __func__, addr, reg, data, ret);
+
+	return (ret != 1) ? -1 : 0;
+}
+
+static u8 s5h1432_readreg(struct s5h1432_state *state, u8 addr, u8 reg)
+{
+	int ret;
+	u8 b0[] = { reg };
+	u8 b1[] = { 0 };
+
+	struct i2c_msg msg[] = {
+		{.addr = addr, .flags = 0, .buf = b0, .len = 1},
+		{.addr = addr, .flags = I2C_M_RD, .buf = b1, .len = 1}
+	};
+
+	ret = i2c_transfer(state->i2c, msg, 2);
+
+	if (ret != 2)
+		printk(KERN_ERR "%s: readreg error (ret == %i)\n",
+		       __func__, ret);
+	return b1[0];
+}
+
+static int s5h1432_sleep(struct dvb_frontend *fe)
+{
+	return 0;
+}
+
+static int s5h1432_set_channel_bandwidth(struct dvb_frontend *fe,
+					 u32 bandwidth)
+{
+	struct s5h1432_state *state = fe->demodulator_priv;
+
+	u8 reg = 0;
+
+	/* Register [0x2E] bit 3:2 : 8MHz = 0; 7MHz = 1; 6MHz = 2 */
+	reg = s5h1432_readreg(state, S5H1432_I2C_TOP_ADDR, 0x2E);
+	reg &= ~(0x0C);
+	switch (bandwidth) {
+	case 6:
+		reg |= 0x08;
+		break;
+	case 7:
+		reg |= 0x04;
+		break;
+	case 8:
+		reg |= 0x00;
+		break;
+	default:
+		return 0;
+	}
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x2E, reg);
+	return 1;
+}
+
+static int s5h1432_set_IF(struct dvb_frontend *fe, u32 ifFreqHz)
+{
+	struct s5h1432_state *state = fe->demodulator_priv;
+
+	switch (ifFreqHz) {
+	case TAIWAN_HI_IF_FREQ_44_MHZ:
+		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x55);
+		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x55);
+		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0x15);
+		break;
+	case EUROPE_HI_IF_FREQ_36_MHZ:
+		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x00);
+		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x00);
+		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0x40);
+		break;
+	case IF_FREQ_6_MHZ:
+		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x00);
+		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x00);
+		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xe0);
+		break;
+	case IF_FREQ_3point3_MHZ:
+		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x66);
+		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x66);
+		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xEE);
+		break;
+	case IF_FREQ_3point5_MHZ:
+		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x55);
+		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x55);
+		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xED);
+		break;
+	case IF_FREQ_4_MHZ:
+		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0xAA);
+		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0xAA);
+		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xEA);
+		break;
+	default:
+		{
+			u32 value = 0;
+			value = (u32) (((48000 - (ifFreqHz / 1000)) * 512 *
+					(u32) 32768) / (48 * 1000));
+			printk(KERN_INFO
+			       "Default IFFreq %d :reg value = 0x%x\n",
+			       ifFreqHz, value);
+			s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4,
+					 (u8) value & 0xFF);
+			s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5,
+					 (u8) (value >> 8) & 0xFF);
+			s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7,
+					 (u8) (value >> 16) & 0xFF);
+			break;
+		}
+
+	}
+
+	return 1;
+}
+
+/* Talk to the demod, set the FEC, GUARD, QAM settings etc */
+static int s5h1432_set_frontend(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+	u32 dvb_bandwidth = 8;
+	struct s5h1432_state *state = fe->demodulator_priv;
+
+	if (p->frequency == state->current_frequency) {
+		/*current_frequency = p->frequency; */
+		/*state->current_frequency = p->frequency; */
+	} else {
+		fe->ops.tuner_ops.set_params(fe);
+		msleep(300);
+		s5h1432_set_channel_bandwidth(fe, dvb_bandwidth);
+		switch (p->bandwidth_hz) {
+		case 6000000:
+			dvb_bandwidth = 6;
+			s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
+			break;
+		case 7000000:
+			dvb_bandwidth = 7;
+			s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
+			break;
+		case 8000000:
+			dvb_bandwidth = 8;
+			s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
+			break;
+		default:
+			return 0;
+		}
+		/*fe->ops.tuner_ops.set_params(fe); */
+/*Soft Reset chip*/
+		msleep(30);
+		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1a);
+		msleep(30);
+		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1b);
+
+		s5h1432_set_channel_bandwidth(fe, dvb_bandwidth);
+		switch (p->bandwidth_hz) {
+		case 6000000:
+			dvb_bandwidth = 6;
+			s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
+			break;
+		case 7000000:
+			dvb_bandwidth = 7;
+			s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
+			break;
+		case 8000000:
+			dvb_bandwidth = 8;
+			s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
+			break;
+		default:
+			return 0;
+		}
+		/*fe->ops.tuner_ops.set_params(fe); */
+		/*Soft Reset chip*/
+		msleep(30);
+		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1a);
+		msleep(30);
+		s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1b);
+
+	}
+
+	state->current_frequency = p->frequency;
+
+	return 0;
+}
+
+static int s5h1432_init(struct dvb_frontend *fe)
+{
+	struct s5h1432_state *state = fe->demodulator_priv;
+
+	u8 reg = 0;
+	state->current_frequency = 0;
+	printk(KERN_INFO " s5h1432_init().\n");
+
+	/*Set VSB mode as default, this also does a soft reset */
+	/*Initialize registers */
+
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x04, 0xa8);
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x05, 0x01);
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x07, 0x70);
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x19, 0x80);
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1b, 0x9D);
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1c, 0x30);
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1d, 0x20);
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1e, 0x1B);
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x2e, 0x40);
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x42, 0x84);
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x50, 0x5a);
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x5a, 0xd3);
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x68, 0x50);
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xb8, 0x3c);
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xc4, 0x10);
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xcc, 0x9c);
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xDA, 0x00);
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe1, 0x94);
+	/* s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xf4, 0xa1); */
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xf9, 0x00);
+
+	/*For NXP tuner*/
+
+	/*Set 3.3MHz as default IF frequency */
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x66);
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x66);
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xEE);
+	/* Set reg 0x1E to get the full dynamic range */
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1e, 0x31);
+
+	/* Mode setting in demod */
+	reg = s5h1432_readreg(state, S5H1432_I2C_TOP_ADDR, 0x42);
+	reg |= 0x80;
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x42, reg);
+	/* Serial mode */
+
+	/* Soft Reset chip */
+
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1a);
+	msleep(30);
+	s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1b);
+
+
+	return 0;
+}
+
+static int s5h1432_read_status(struct dvb_frontend *fe, enum fe_status *status)
+{
+	return 0;
+}
+
+static int s5h1432_read_signal_strength(struct dvb_frontend *fe,
+					u16 *signal_strength)
+{
+	return 0;
+}
+
+static int s5h1432_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+	return 0;
+}
+
+static int s5h1432_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+
+	return 0;
+}
+
+static int s5h1432_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+	return 0;
+}
+
+static int s5h1432_get_tune_settings(struct dvb_frontend *fe,
+				     struct dvb_frontend_tune_settings *tune)
+{
+	return 0;
+}
+
+static void s5h1432_release(struct dvb_frontend *fe)
+{
+	struct s5h1432_state *state = fe->demodulator_priv;
+	kfree(state);
+}
+
+static const struct dvb_frontend_ops s5h1432_ops;
+
+struct dvb_frontend *s5h1432_attach(const struct s5h1432_config *config,
+				    struct i2c_adapter *i2c)
+{
+	struct s5h1432_state *state = NULL;
+
+	printk(KERN_INFO " Enter s5h1432_attach(). attach success!\n");
+	/* allocate memory for the internal state */
+	state = kmalloc(sizeof(struct s5h1432_state), GFP_KERNEL);
+	if (!state)
+		return NULL;
+
+	/* setup the state */
+	state->config = config;
+	state->i2c = i2c;
+	state->current_modulation = QAM_16;
+	state->inversion = state->config->inversion;
+
+	/* create dvb_frontend */
+	memcpy(&state->frontend.ops, &s5h1432_ops,
+	       sizeof(struct dvb_frontend_ops));
+
+	state->frontend.demodulator_priv = state;
+
+	return &state->frontend;
+}
+EXPORT_SYMBOL(s5h1432_attach);
+
+static const struct dvb_frontend_ops s5h1432_ops = {
+	.delsys = { SYS_DVBT },
+	.info = {
+		 .name = "Samsung s5h1432 DVB-T Frontend",
+		 .frequency_min_hz = 177 * MHz,
+		 .frequency_max_hz = 858 * MHz,
+		 .frequency_stepsize_hz = 166666,
+		 .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+		 FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+		 FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+		 FE_CAN_HIERARCHY_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
+		 FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER},
+
+	.init = s5h1432_init,
+	.sleep = s5h1432_sleep,
+	.set_frontend = s5h1432_set_frontend,
+	.get_tune_settings = s5h1432_get_tune_settings,
+	.read_status = s5h1432_read_status,
+	.read_ber = s5h1432_read_ber,
+	.read_signal_strength = s5h1432_read_signal_strength,
+	.read_snr = s5h1432_read_snr,
+	.read_ucblocks = s5h1432_read_ucblocks,
+	.release = s5h1432_release,
+};
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Enable verbose debug messages");
+
+MODULE_DESCRIPTION("Samsung s5h1432 DVB-T Demodulator driver");
+MODULE_AUTHOR("Bill Liu");
+MODULE_LICENSE("GPL");