Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 526 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/tda10021.c b/drivers/media/dvb-frontends/tda10021.c
new file mode 100644
index 000000000..faa6e54b3
--- /dev/null
+++ b/drivers/media/dvb-frontends/tda10021.c
@@ -0,0 +1,526 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+    TDA10021  - Single Chip Cable Channel Receiver driver module
+	       used on the Siemens DVB-C cards
+
+    Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
+    Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
+		   Support for TDA10021
+
+*/
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+
+#include <media/dvb_frontend.h>
+#include "tda1002x.h"
+
+
+struct tda10021_state {
+	struct i2c_adapter* i2c;
+	/* configuration settings */
+	const struct tda1002x_config* config;
+	struct dvb_frontend frontend;
+
+	u8 pwm;
+	u8 reg0;
+};
+
+
+#if 0
+#define dprintk(x...) printk(x)
+#else
+#define dprintk(x...)
+#endif
+
+static int verbose;
+
+#define XIN 57840000UL
+
+#define FIN (XIN >> 4)
+
+static int tda10021_inittab_size = 0x40;
+static u8 tda10021_inittab[0x40]=
+{
+	0x73, 0x6a, 0x23, 0x0a, 0x02, 0x37, 0x77, 0x1a,
+	0x37, 0x6a, 0x17, 0x8a, 0x1e, 0x86, 0x43, 0x40,
+	0xb8, 0x3f, 0xa1, 0x00, 0xcd, 0x01, 0x00, 0xff,
+	0x11, 0x00, 0x7c, 0x31, 0x30, 0x20, 0x00, 0x00,
+	0x02, 0x00, 0x00, 0x7d, 0x00, 0x00, 0x00, 0x00,
+	0x07, 0x00, 0x33, 0x11, 0x0d, 0x95, 0x08, 0x58,
+	0x00, 0x00, 0x80, 0x00, 0x80, 0xff, 0x00, 0x00,
+	0x04, 0x2d, 0x2f, 0xff, 0x00, 0x00, 0x00, 0x00,
+};
+
+static int _tda10021_writereg (struct tda10021_state* state, u8 reg, u8 data)
+{
+	u8 buf[] = { reg, data };
+	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
+	int ret;
+
+	ret = i2c_transfer (state->i2c, &msg, 1);
+	if (ret != 1)
+		printk("DVB: TDA10021(%d): %s, writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n",
+			state->frontend.dvb->num, __func__, reg, data, ret);
+
+	msleep(10);
+	return (ret != 1) ? -EREMOTEIO : 0;
+}
+
+static u8 tda10021_readreg (struct tda10021_state* state, u8 reg)
+{
+	u8 b0 [] = { reg };
+	u8 b1 [] = { 0 };
+	struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },
+				  { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
+	int ret;
+
+	ret = i2c_transfer (state->i2c, msg, 2);
+	// Don't print an error message if the id is read.
+	if (ret != 2 && reg != 0x1a)
+		printk("DVB: TDA10021: %s: readreg error (ret == %i)\n",
+				__func__, ret);
+	return b1[0];
+}
+
+//get access to tuner
+static int lock_tuner(struct tda10021_state* state)
+{
+	u8 buf[2] = { 0x0f, tda10021_inittab[0x0f] | 0x80 };
+	struct i2c_msg msg = {.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2};
+
+	if(i2c_transfer(state->i2c, &msg, 1) != 1)
+	{
+		printk("tda10021: lock tuner fails\n");
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+//release access from tuner
+static int unlock_tuner(struct tda10021_state* state)
+{
+	u8 buf[2] = { 0x0f, tda10021_inittab[0x0f] & 0x7f };
+	struct i2c_msg msg_post={.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2};
+
+	if(i2c_transfer(state->i2c, &msg_post, 1) != 1)
+	{
+		printk("tda10021: unlock tuner fails\n");
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static int tda10021_setup_reg0(struct tda10021_state *state, u8 reg0,
+			       enum fe_spectral_inversion inversion)
+{
+	reg0 |= state->reg0 & 0x63;
+
+	if ((INVERSION_ON == inversion) ^ (state->config->invert == 0))
+		reg0 &= ~0x20;
+	else
+		reg0 |= 0x20;
+
+	_tda10021_writereg (state, 0x00, reg0 & 0xfe);
+	_tda10021_writereg (state, 0x00, reg0 | 0x01);
+
+	state->reg0 = reg0;
+	return 0;
+}
+
+static int tda10021_set_symbolrate (struct tda10021_state* state, u32 symbolrate)
+{
+	s32 BDR;
+	s32 BDRI;
+	s16 SFIL = 0;
+	u16 NDEC = 0;
+	u32 tmp, ratio;
+
+	if (symbolrate > XIN / 2)
+		symbolrate = XIN / 2;
+	else if (symbolrate < 500000)
+		symbolrate = 500000;
+
+	if (symbolrate < XIN / 16)
+		NDEC = 1;
+	if (symbolrate < XIN / 32)
+		NDEC = 2;
+	if (symbolrate < XIN / 64)
+		NDEC = 3;
+
+	if (symbolrate < XIN * 10 / 123)
+		SFIL = 1;
+	if (symbolrate < XIN * 10 / 160)
+		SFIL = 0;
+	if (symbolrate < XIN * 10 / 246)
+		SFIL = 1;
+	if (symbolrate < XIN * 10 / 320)
+		SFIL = 0;
+	if (symbolrate < XIN * 10 / 492)
+		SFIL = 1;
+	if (symbolrate < XIN * 10 / 640)
+		SFIL = 0;
+	if (symbolrate < XIN * 10 / 984)
+		SFIL = 1;
+
+	symbolrate <<= NDEC;
+	ratio = (symbolrate << 4) / FIN;
+	tmp =  ((symbolrate << 4) % FIN) << 8;
+	ratio = (ratio << 8) + tmp / FIN;
+	tmp = (tmp % FIN) << 8;
+	ratio = (ratio << 8) + DIV_ROUND_CLOSEST(tmp, FIN);
+
+	BDR = ratio;
+	BDRI = (((XIN << 5) / symbolrate) + 1) / 2;
+
+	if (BDRI > 0xFF)
+		BDRI = 0xFF;
+
+	SFIL = (SFIL << 4) | tda10021_inittab[0x0E];
+
+	NDEC = (NDEC << 6) | tda10021_inittab[0x03];
+
+	_tda10021_writereg (state, 0x03, NDEC);
+	_tda10021_writereg (state, 0x0a, BDR&0xff);
+	_tda10021_writereg (state, 0x0b, (BDR>> 8)&0xff);
+	_tda10021_writereg (state, 0x0c, (BDR>>16)&0x3f);
+
+	_tda10021_writereg (state, 0x0d, BDRI);
+	_tda10021_writereg (state, 0x0e, SFIL);
+
+	return 0;
+}
+
+static int tda10021_init (struct dvb_frontend *fe)
+{
+	struct tda10021_state* state = fe->demodulator_priv;
+	int i;
+
+	dprintk("DVB: TDA10021(%d): init chip\n", fe->adapter->num);
+
+	//_tda10021_writereg (fe, 0, 0);
+
+	for (i=0; i<tda10021_inittab_size; i++)
+		_tda10021_writereg (state, i, tda10021_inittab[i]);
+
+	_tda10021_writereg (state, 0x34, state->pwm);
+
+	//Comment by markus
+	//0x2A[3-0] == PDIV -> P multiplaying factor (P=PDIV+1)(default 0)
+	//0x2A[4] == BYPPLL -> Power down mode (default 1)
+	//0x2A[5] == LCK -> PLL Lock Flag
+	//0x2A[6] == POLAXIN -> Polarity of the input reference clock (default 0)
+
+	//Activate PLL
+	_tda10021_writereg(state, 0x2a, tda10021_inittab[0x2a] & 0xef);
+	return 0;
+}
+
+struct qam_params {
+	u8 conf, agcref, lthr, mseth, aref;
+};
+
+static int tda10021_set_parameters(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	u32 delsys  = c->delivery_system;
+	unsigned qam = c->modulation;
+	bool is_annex_c;
+	u32 reg0x3d;
+	struct tda10021_state* state = fe->demodulator_priv;
+	static const struct qam_params qam_params[] = {
+		/* Modulation  Conf  AGCref  LTHR  MSETH  AREF */
+		[QPSK]	   = { 0x14, 0x78,   0x78, 0x8c,  0x96 },
+		[QAM_16]   = { 0x00, 0x8c,   0x87, 0xa2,  0x91 },
+		[QAM_32]   = { 0x04, 0x8c,   0x64, 0x74,  0x96 },
+		[QAM_64]   = { 0x08, 0x6a,   0x46, 0x43,  0x6a },
+		[QAM_128]  = { 0x0c, 0x78,   0x36, 0x34,  0x7e },
+		[QAM_256]  = { 0x10, 0x5c,   0x26, 0x23,  0x6b },
+	};
+
+	switch (delsys) {
+	case SYS_DVBC_ANNEX_A:
+		is_annex_c = false;
+		break;
+	case SYS_DVBC_ANNEX_C:
+		is_annex_c = true;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * gcc optimizes the code below the same way as it would code:
+	 *           "if (qam > 5) return -EINVAL;"
+	 * Yet, the code is clearer, as it shows what QAM standards are
+	 * supported by the driver, and avoids the usage of magic numbers on
+	 * it.
+	 */
+	switch (qam) {
+	case QPSK:
+	case QAM_16:
+	case QAM_32:
+	case QAM_64:
+	case QAM_128:
+	case QAM_256:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (c->inversion != INVERSION_ON && c->inversion != INVERSION_OFF)
+		return -EINVAL;
+
+	/*printk("tda10021: set frequency to %d qam=%d symrate=%d\n", p->frequency,qam,p->symbol_rate);*/
+
+	if (fe->ops.tuner_ops.set_params) {
+		fe->ops.tuner_ops.set_params(fe);
+		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
+	}
+
+	tda10021_set_symbolrate(state, c->symbol_rate);
+	_tda10021_writereg(state, 0x34, state->pwm);
+
+	_tda10021_writereg(state, 0x01, qam_params[qam].agcref);
+	_tda10021_writereg(state, 0x05, qam_params[qam].lthr);
+	_tda10021_writereg(state, 0x08, qam_params[qam].mseth);
+	_tda10021_writereg(state, 0x09, qam_params[qam].aref);
+
+	/*
+	 * Bit 0 == 0 means roll-off = 0.15 (Annex A)
+	 *	 == 1 means roll-off = 0.13 (Annex C)
+	 */
+	reg0x3d = tda10021_readreg (state, 0x3d);
+	if (is_annex_c)
+		_tda10021_writereg (state, 0x3d, 0x01 | reg0x3d);
+	else
+		_tda10021_writereg (state, 0x3d, 0xfe & reg0x3d);
+	tda10021_setup_reg0(state, qam_params[qam].conf, c->inversion);
+
+	return 0;
+}
+
+static int tda10021_read_status(struct dvb_frontend *fe,
+				enum fe_status *status)
+{
+	struct tda10021_state* state = fe->demodulator_priv;
+	int sync;
+
+	*status = 0;
+	//0x11[0] == EQALGO -> Equalizer algorithms state
+	//0x11[1] == CARLOCK -> Carrier locked
+	//0x11[2] == FSYNC -> Frame synchronisation
+	//0x11[3] == FEL -> Front End locked
+	//0x11[6] == NODVB -> DVB Mode Information
+	sync = tda10021_readreg (state, 0x11);
+
+	if (sync & 2)
+		*status |= FE_HAS_SIGNAL|FE_HAS_CARRIER;
+
+	if (sync & 4)
+		*status |= FE_HAS_SYNC|FE_HAS_VITERBI;
+
+	if (sync & 8)
+		*status |= FE_HAS_LOCK;
+
+	return 0;
+}
+
+static int tda10021_read_ber(struct dvb_frontend* fe, u32* ber)
+{
+	struct tda10021_state* state = fe->demodulator_priv;
+
+	u32 _ber = tda10021_readreg(state, 0x14) |
+		(tda10021_readreg(state, 0x15) << 8) |
+		((tda10021_readreg(state, 0x16) & 0x0f) << 16);
+	_tda10021_writereg(state, 0x10, (tda10021_readreg(state, 0x10) & ~0xc0)
+					| (tda10021_inittab[0x10] & 0xc0));
+	*ber = 10 * _ber;
+
+	return 0;
+}
+
+static int tda10021_read_signal_strength(struct dvb_frontend* fe, u16* strength)
+{
+	struct tda10021_state* state = fe->demodulator_priv;
+
+	u8 config = tda10021_readreg(state, 0x02);
+	u8 gain = tda10021_readreg(state, 0x17);
+	if (config & 0x02)
+		/* the agc value is inverted */
+		gain = ~gain;
+	*strength = (gain << 8) | gain;
+
+	return 0;
+}
+
+static int tda10021_read_snr(struct dvb_frontend* fe, u16* snr)
+{
+	struct tda10021_state* state = fe->demodulator_priv;
+
+	u8 quality = ~tda10021_readreg(state, 0x18);
+	*snr = (quality << 8) | quality;
+
+	return 0;
+}
+
+static int tda10021_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
+{
+	struct tda10021_state* state = fe->demodulator_priv;
+
+	*ucblocks = tda10021_readreg (state, 0x13) & 0x7f;
+	if (*ucblocks == 0x7f)
+		*ucblocks = 0xffffffff;
+
+	/* reset uncorrected block counter */
+	_tda10021_writereg (state, 0x10, tda10021_inittab[0x10] & 0xdf);
+	_tda10021_writereg (state, 0x10, tda10021_inittab[0x10]);
+
+	return 0;
+}
+
+static int tda10021_get_frontend(struct dvb_frontend *fe,
+				 struct dtv_frontend_properties *p)
+{
+	struct tda10021_state* state = fe->demodulator_priv;
+	int sync;
+	s8 afc = 0;
+
+	sync = tda10021_readreg(state, 0x11);
+	afc = tda10021_readreg(state, 0x19);
+	if (verbose) {
+		/* AFC only valid when carrier has been recovered */
+		printk(sync & 2 ? "DVB: TDA10021(%d): AFC (%d) %dHz\n" :
+				  "DVB: TDA10021(%d): [AFC (%d) %dHz]\n",
+			state->frontend.dvb->num, afc,
+		       -((s32)p->symbol_rate * afc) >> 10);
+	}
+
+	p->inversion = ((state->reg0 & 0x20) == 0x20) ^ (state->config->invert != 0) ? INVERSION_ON : INVERSION_OFF;
+	p->modulation = ((state->reg0 >> 2) & 7) + QAM_16;
+
+	p->fec_inner = FEC_NONE;
+	p->frequency = ((p->frequency + 31250) / 62500) * 62500;
+
+	if (sync & 2)
+		p->frequency -= ((s32)p->symbol_rate * afc) >> 10;
+
+	return 0;
+}
+
+static int tda10021_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
+{
+	struct tda10021_state* state = fe->demodulator_priv;
+
+	if (enable) {
+		lock_tuner(state);
+	} else {
+		unlock_tuner(state);
+	}
+	return 0;
+}
+
+static int tda10021_sleep(struct dvb_frontend* fe)
+{
+	struct tda10021_state* state = fe->demodulator_priv;
+
+	_tda10021_writereg (state, 0x1b, 0x02);  /* pdown ADC */
+	_tda10021_writereg (state, 0x00, 0x80);  /* standby */
+
+	return 0;
+}
+
+static void tda10021_release(struct dvb_frontend* fe)
+{
+	struct tda10021_state* state = fe->demodulator_priv;
+	kfree(state);
+}
+
+static const struct dvb_frontend_ops tda10021_ops;
+
+struct dvb_frontend* tda10021_attach(const struct tda1002x_config* config,
+				     struct i2c_adapter* i2c,
+				     u8 pwm)
+{
+	struct tda10021_state* state = NULL;
+	u8 id;
+
+	/* allocate memory for the internal state */
+	state = kzalloc(sizeof(struct tda10021_state), GFP_KERNEL);
+	if (state == NULL) goto error;
+
+	/* setup the state */
+	state->config = config;
+	state->i2c = i2c;
+	state->pwm = pwm;
+	state->reg0 = tda10021_inittab[0];
+
+	/* check if the demod is there */
+	id = tda10021_readreg(state, 0x1a);
+	if ((id & 0xf0) != 0x70) goto error;
+
+	/* Don't claim TDA10023 */
+	if (id == 0x7d)
+		goto error;
+
+	printk("TDA10021: i2c-addr = 0x%02x, id = 0x%02x\n",
+	       state->config->demod_address, id);
+
+	/* create dvb_frontend */
+	memcpy(&state->frontend.ops, &tda10021_ops, sizeof(struct dvb_frontend_ops));
+	state->frontend.demodulator_priv = state;
+	return &state->frontend;
+
+error:
+	kfree(state);
+	return NULL;
+}
+
+static const struct dvb_frontend_ops tda10021_ops = {
+	.delsys = { SYS_DVBC_ANNEX_A, SYS_DVBC_ANNEX_C },
+	.info = {
+		.name = "Philips TDA10021 DVB-C",
+		.frequency_min_hz =  47 * MHz,
+		.frequency_max_hz = 862 * MHz,
+		.frequency_stepsize_hz = 62500,
+		.symbol_rate_min = (XIN / 2) / 64,     /* SACLK/64 == (XIN/2)/64 */
+		.symbol_rate_max = (XIN / 2) / 4,      /* SACLK/4 */
+	#if 0
+		.frequency_tolerance = ???,
+		.symbol_rate_tolerance = ???,  /* ppm */  /* == 8% (spec p. 5) */
+	#endif
+		.caps = 0x400 | //FE_CAN_QAM_4
+			FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 |
+			FE_CAN_QAM_128 | FE_CAN_QAM_256 |
+			FE_CAN_FEC_AUTO
+	},
+
+	.release = tda10021_release,
+
+	.init = tda10021_init,
+	.sleep = tda10021_sleep,
+	.i2c_gate_ctrl = tda10021_i2c_gate_ctrl,
+
+	.set_frontend = tda10021_set_parameters,
+	.get_frontend = tda10021_get_frontend,
+
+	.read_status = tda10021_read_status,
+	.read_ber = tda10021_read_ber,
+	.read_signal_strength = tda10021_read_signal_strength,
+	.read_snr = tda10021_read_snr,
+	.read_ucblocks = tda10021_read_ucblocks,
+};
+
+module_param(verbose, int, 0644);
+MODULE_PARM_DESC(verbose, "print AFC offset after tuning for debugging the PWM setting");
+
+MODULE_DESCRIPTION("Philips TDA10021 DVB-C demodulator driver");
+MODULE_AUTHOR("Ralph Metzler, Holger Waechtler, Markus Schulz");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(tda10021_attach);