Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 480 insertions, 0 deletions

diff --git a/drivers/media/i2c/lm3560.c b/drivers/media/i2c/lm3560.c
new file mode 100644
index 000000000..5ef613604
--- /dev/null
+++ b/drivers/media/i2c/lm3560.c
@@ -0,0 +1,480 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * drivers/media/i2c/lm3560.c
+ * General device driver for TI lm3559, lm3560, FLASH LED Driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ *
+ * Contact: Daniel Jeong <gshark.jeong@gmail.com>
+ *			Ldd-Mlp <ldd-mlp@list.ti.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/videodev2.h>
+#include <media/i2c/lm3560.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+
+/* registers definitions */
+#define REG_ENABLE		0x10
+#define REG_TORCH_BR	0xa0
+#define REG_FLASH_BR	0xb0
+#define REG_FLASH_TOUT	0xc0
+#define REG_FLAG		0xd0
+#define REG_CONFIG1		0xe0
+
+/* fault mask */
+#define FAULT_TIMEOUT	(1<<0)
+#define FAULT_OVERTEMP	(1<<1)
+#define FAULT_SHORT_CIRCUIT	(1<<2)
+
+enum led_enable {
+	MODE_SHDN = 0x0,
+	MODE_TORCH = 0x2,
+	MODE_FLASH = 0x3,
+};
+
+/**
+ * struct lm3560_flash
+ *
+ * @dev: pointer to &struct device
+ * @pdata: platform data
+ * @regmap: reg. map for i2c
+ * @lock: muxtex for serial access.
+ * @led_mode: V4L2 LED mode
+ * @ctrls_led: V4L2 controls
+ * @subdev_led: V4L2 subdev
+ */
+struct lm3560_flash {
+	struct device *dev;
+	struct lm3560_platform_data *pdata;
+	struct regmap *regmap;
+	struct mutex lock;
+
+	enum v4l2_flash_led_mode led_mode;
+	struct v4l2_ctrl_handler ctrls_led[LM3560_LED_MAX];
+	struct v4l2_subdev subdev_led[LM3560_LED_MAX];
+};
+
+#define to_lm3560_flash(_ctrl, _no)	\
+	container_of(_ctrl->handler, struct lm3560_flash, ctrls_led[_no])
+
+/* enable mode control */
+static int lm3560_mode_ctrl(struct lm3560_flash *flash)
+{
+	int rval = -EINVAL;
+
+	switch (flash->led_mode) {
+	case V4L2_FLASH_LED_MODE_NONE:
+		rval = regmap_update_bits(flash->regmap,
+					  REG_ENABLE, 0x03, MODE_SHDN);
+		break;
+	case V4L2_FLASH_LED_MODE_TORCH:
+		rval = regmap_update_bits(flash->regmap,
+					  REG_ENABLE, 0x03, MODE_TORCH);
+		break;
+	case V4L2_FLASH_LED_MODE_FLASH:
+		rval = regmap_update_bits(flash->regmap,
+					  REG_ENABLE, 0x03, MODE_FLASH);
+		break;
+	}
+	return rval;
+}
+
+/* led1/2 enable/disable */
+static int lm3560_enable_ctrl(struct lm3560_flash *flash,
+			      enum lm3560_led_id led_no, bool on)
+{
+	int rval;
+
+	if (led_no == LM3560_LED0) {
+		if (on)
+			rval = regmap_update_bits(flash->regmap,
+						  REG_ENABLE, 0x08, 0x08);
+		else
+			rval = regmap_update_bits(flash->regmap,
+						  REG_ENABLE, 0x08, 0x00);
+	} else {
+		if (on)
+			rval = regmap_update_bits(flash->regmap,
+						  REG_ENABLE, 0x10, 0x10);
+		else
+			rval = regmap_update_bits(flash->regmap,
+						  REG_ENABLE, 0x10, 0x00);
+	}
+	return rval;
+}
+
+/* torch1/2 brightness control */
+static int lm3560_torch_brt_ctrl(struct lm3560_flash *flash,
+				 enum lm3560_led_id led_no, unsigned int brt)
+{
+	int rval;
+	u8 br_bits;
+
+	if (brt < LM3560_TORCH_BRT_MIN)
+		return lm3560_enable_ctrl(flash, led_no, false);
+	else
+		rval = lm3560_enable_ctrl(flash, led_no, true);
+
+	br_bits = LM3560_TORCH_BRT_uA_TO_REG(brt);
+	if (led_no == LM3560_LED0)
+		rval = regmap_update_bits(flash->regmap,
+					  REG_TORCH_BR, 0x07, br_bits);
+	else
+		rval = regmap_update_bits(flash->regmap,
+					  REG_TORCH_BR, 0x38, br_bits << 3);
+
+	return rval;
+}
+
+/* flash1/2 brightness control */
+static int lm3560_flash_brt_ctrl(struct lm3560_flash *flash,
+				 enum lm3560_led_id led_no, unsigned int brt)
+{
+	int rval;
+	u8 br_bits;
+
+	if (brt < LM3560_FLASH_BRT_MIN)
+		return lm3560_enable_ctrl(flash, led_no, false);
+	else
+		rval = lm3560_enable_ctrl(flash, led_no, true);
+
+	br_bits = LM3560_FLASH_BRT_uA_TO_REG(brt);
+	if (led_no == LM3560_LED0)
+		rval = regmap_update_bits(flash->regmap,
+					  REG_FLASH_BR, 0x0f, br_bits);
+	else
+		rval = regmap_update_bits(flash->regmap,
+					  REG_FLASH_BR, 0xf0, br_bits << 4);
+
+	return rval;
+}
+
+/* v4l2 controls  */
+static int lm3560_get_ctrl(struct v4l2_ctrl *ctrl, enum lm3560_led_id led_no)
+{
+	struct lm3560_flash *flash = to_lm3560_flash(ctrl, led_no);
+	int rval = -EINVAL;
+
+	mutex_lock(&flash->lock);
+
+	if (ctrl->id == V4L2_CID_FLASH_FAULT) {
+		s32 fault = 0;
+		unsigned int reg_val;
+		rval = regmap_read(flash->regmap, REG_FLAG, &reg_val);
+		if (rval < 0)
+			goto out;
+		if (reg_val & FAULT_SHORT_CIRCUIT)
+			fault |= V4L2_FLASH_FAULT_SHORT_CIRCUIT;
+		if (reg_val & FAULT_OVERTEMP)
+			fault |= V4L2_FLASH_FAULT_OVER_TEMPERATURE;
+		if (reg_val & FAULT_TIMEOUT)
+			fault |= V4L2_FLASH_FAULT_TIMEOUT;
+		ctrl->cur.val = fault;
+	}
+
+out:
+	mutex_unlock(&flash->lock);
+	return rval;
+}
+
+static int lm3560_set_ctrl(struct v4l2_ctrl *ctrl, enum lm3560_led_id led_no)
+{
+	struct lm3560_flash *flash = to_lm3560_flash(ctrl, led_no);
+	u8 tout_bits;
+	int rval = -EINVAL;
+
+	mutex_lock(&flash->lock);
+
+	switch (ctrl->id) {
+	case V4L2_CID_FLASH_LED_MODE:
+		flash->led_mode = ctrl->val;
+		if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
+			rval = lm3560_mode_ctrl(flash);
+		break;
+
+	case V4L2_CID_FLASH_STROBE_SOURCE:
+		rval = regmap_update_bits(flash->regmap,
+					  REG_CONFIG1, 0x04, (ctrl->val) << 2);
+		if (rval < 0)
+			goto err_out;
+		break;
+
+	case V4L2_CID_FLASH_STROBE:
+		if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) {
+			rval = -EBUSY;
+			goto err_out;
+		}
+		flash->led_mode = V4L2_FLASH_LED_MODE_FLASH;
+		rval = lm3560_mode_ctrl(flash);
+		break;
+
+	case V4L2_CID_FLASH_STROBE_STOP:
+		if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) {
+			rval = -EBUSY;
+			goto err_out;
+		}
+		flash->led_mode = V4L2_FLASH_LED_MODE_NONE;
+		rval = lm3560_mode_ctrl(flash);
+		break;
+
+	case V4L2_CID_FLASH_TIMEOUT:
+		tout_bits = LM3560_FLASH_TOUT_ms_TO_REG(ctrl->val);
+		rval = regmap_update_bits(flash->regmap,
+					  REG_FLASH_TOUT, 0x1f, tout_bits);
+		break;
+
+	case V4L2_CID_FLASH_INTENSITY:
+		rval = lm3560_flash_brt_ctrl(flash, led_no, ctrl->val);
+		break;
+
+	case V4L2_CID_FLASH_TORCH_INTENSITY:
+		rval = lm3560_torch_brt_ctrl(flash, led_no, ctrl->val);
+		break;
+	}
+
+err_out:
+	mutex_unlock(&flash->lock);
+	return rval;
+}
+
+static int lm3560_led1_get_ctrl(struct v4l2_ctrl *ctrl)
+{
+	return lm3560_get_ctrl(ctrl, LM3560_LED1);
+}
+
+static int lm3560_led1_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+	return lm3560_set_ctrl(ctrl, LM3560_LED1);
+}
+
+static int lm3560_led0_get_ctrl(struct v4l2_ctrl *ctrl)
+{
+	return lm3560_get_ctrl(ctrl, LM3560_LED0);
+}
+
+static int lm3560_led0_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+	return lm3560_set_ctrl(ctrl, LM3560_LED0);
+}
+
+static const struct v4l2_ctrl_ops lm3560_led_ctrl_ops[LM3560_LED_MAX] = {
+	[LM3560_LED0] = {
+			 .g_volatile_ctrl = lm3560_led0_get_ctrl,
+			 .s_ctrl = lm3560_led0_set_ctrl,
+			 },
+	[LM3560_LED1] = {
+			 .g_volatile_ctrl = lm3560_led1_get_ctrl,
+			 .s_ctrl = lm3560_led1_set_ctrl,
+			 }
+};
+
+static int lm3560_init_controls(struct lm3560_flash *flash,
+				enum lm3560_led_id led_no)
+{
+	struct v4l2_ctrl *fault;
+	u32 max_flash_brt = flash->pdata->max_flash_brt[led_no];
+	u32 max_torch_brt = flash->pdata->max_torch_brt[led_no];
+	struct v4l2_ctrl_handler *hdl = &flash->ctrls_led[led_no];
+	const struct v4l2_ctrl_ops *ops = &lm3560_led_ctrl_ops[led_no];
+
+	v4l2_ctrl_handler_init(hdl, 8);
+
+	/* flash mode */
+	v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_FLASH_LED_MODE,
+			       V4L2_FLASH_LED_MODE_TORCH, ~0x7,
+			       V4L2_FLASH_LED_MODE_NONE);
+	flash->led_mode = V4L2_FLASH_LED_MODE_NONE;
+
+	/* flash source */
+	v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_FLASH_STROBE_SOURCE,
+			       0x1, ~0x3, V4L2_FLASH_STROBE_SOURCE_SOFTWARE);
+
+	/* flash strobe */
+	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE, 0, 0, 0, 0);
+
+	/* flash strobe stop */
+	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0);
+
+	/* flash strobe timeout */
+	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_TIMEOUT,
+			  LM3560_FLASH_TOUT_MIN,
+			  flash->pdata->max_flash_timeout,
+			  LM3560_FLASH_TOUT_STEP,
+			  flash->pdata->max_flash_timeout);
+
+	/* flash brt */
+	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_INTENSITY,
+			  LM3560_FLASH_BRT_MIN, max_flash_brt,
+			  LM3560_FLASH_BRT_STEP, max_flash_brt);
+
+	/* torch brt */
+	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_TORCH_INTENSITY,
+			  LM3560_TORCH_BRT_MIN, max_torch_brt,
+			  LM3560_TORCH_BRT_STEP, max_torch_brt);
+
+	/* fault */
+	fault = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_FAULT, 0,
+				  V4L2_FLASH_FAULT_OVER_VOLTAGE
+				  | V4L2_FLASH_FAULT_OVER_TEMPERATURE
+				  | V4L2_FLASH_FAULT_SHORT_CIRCUIT
+				  | V4L2_FLASH_FAULT_TIMEOUT, 0, 0);
+	if (fault != NULL)
+		fault->flags |= V4L2_CTRL_FLAG_VOLATILE;
+
+	if (hdl->error)
+		return hdl->error;
+
+	flash->subdev_led[led_no].ctrl_handler = hdl;
+	return 0;
+}
+
+/* initialize device */
+static const struct v4l2_subdev_ops lm3560_ops = {
+	.core = NULL,
+};
+
+static const struct regmap_config lm3560_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0xFF,
+};
+
+static int lm3560_subdev_init(struct lm3560_flash *flash,
+			      enum lm3560_led_id led_no, char *led_name)
+{
+	struct i2c_client *client = to_i2c_client(flash->dev);
+	int rval;
+
+	v4l2_i2c_subdev_init(&flash->subdev_led[led_no], client, &lm3560_ops);
+	flash->subdev_led[led_no].flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	strscpy(flash->subdev_led[led_no].name, led_name,
+		sizeof(flash->subdev_led[led_no].name));
+	rval = lm3560_init_controls(flash, led_no);
+	if (rval)
+		goto err_out;
+	rval = media_entity_pads_init(&flash->subdev_led[led_no].entity, 0, NULL);
+	if (rval < 0)
+		goto err_out;
+	flash->subdev_led[led_no].entity.function = MEDIA_ENT_F_FLASH;
+
+	return rval;
+
+err_out:
+	v4l2_ctrl_handler_free(&flash->ctrls_led[led_no]);
+	return rval;
+}
+
+static int lm3560_init_device(struct lm3560_flash *flash)
+{
+	int rval;
+	unsigned int reg_val;
+
+	/* set peak current */
+	rval = regmap_update_bits(flash->regmap,
+				  REG_FLASH_TOUT, 0x60, flash->pdata->peak);
+	if (rval < 0)
+		return rval;
+	/* output disable */
+	flash->led_mode = V4L2_FLASH_LED_MODE_NONE;
+	rval = lm3560_mode_ctrl(flash);
+	if (rval < 0)
+		return rval;
+	/* reset faults */
+	rval = regmap_read(flash->regmap, REG_FLAG, &reg_val);
+	return rval;
+}
+
+static int lm3560_probe(struct i2c_client *client)
+{
+	struct lm3560_flash *flash;
+	struct lm3560_platform_data *pdata = dev_get_platdata(&client->dev);
+	int rval;
+
+	flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL);
+	if (flash == NULL)
+		return -ENOMEM;
+
+	flash->regmap = devm_regmap_init_i2c(client, &lm3560_regmap);
+	if (IS_ERR(flash->regmap)) {
+		rval = PTR_ERR(flash->regmap);
+		return rval;
+	}
+
+	/* if there is no platform data, use chip default value */
+	if (pdata == NULL) {
+		pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
+		if (pdata == NULL)
+			return -ENODEV;
+		pdata->peak = LM3560_PEAK_3600mA;
+		pdata->max_flash_timeout = LM3560_FLASH_TOUT_MAX;
+		/* led 1 */
+		pdata->max_flash_brt[LM3560_LED0] = LM3560_FLASH_BRT_MAX;
+		pdata->max_torch_brt[LM3560_LED0] = LM3560_TORCH_BRT_MAX;
+		/* led 2 */
+		pdata->max_flash_brt[LM3560_LED1] = LM3560_FLASH_BRT_MAX;
+		pdata->max_torch_brt[LM3560_LED1] = LM3560_TORCH_BRT_MAX;
+	}
+	flash->pdata = pdata;
+	flash->dev = &client->dev;
+	mutex_init(&flash->lock);
+
+	rval = lm3560_subdev_init(flash, LM3560_LED0, "lm3560-led0");
+	if (rval < 0)
+		return rval;
+
+	rval = lm3560_subdev_init(flash, LM3560_LED1, "lm3560-led1");
+	if (rval < 0)
+		return rval;
+
+	rval = lm3560_init_device(flash);
+	if (rval < 0)
+		return rval;
+
+	i2c_set_clientdata(client, flash);
+
+	return 0;
+}
+
+static void lm3560_remove(struct i2c_client *client)
+{
+	struct lm3560_flash *flash = i2c_get_clientdata(client);
+	unsigned int i;
+
+	for (i = LM3560_LED0; i < LM3560_LED_MAX; i++) {
+		v4l2_device_unregister_subdev(&flash->subdev_led[i]);
+		v4l2_ctrl_handler_free(&flash->ctrls_led[i]);
+		media_entity_cleanup(&flash->subdev_led[i].entity);
+	}
+}
+
+static const struct i2c_device_id lm3560_id_table[] = {
+	{LM3559_NAME, 0},
+	{LM3560_NAME, 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, lm3560_id_table);
+
+static struct i2c_driver lm3560_i2c_driver = {
+	.driver = {
+		   .name = LM3560_NAME,
+		   .pm = NULL,
+		   },
+	.probe_new = lm3560_probe,
+	.remove = lm3560_remove,
+	.id_table = lm3560_id_table,
+};
+
+module_i2c_driver(lm3560_i2c_driver);
+
+MODULE_AUTHOR("Daniel Jeong <gshark.jeong@gmail.com>");
+MODULE_AUTHOR("Ldd Mlp <ldd-mlp@list.ti.com>");
+MODULE_DESCRIPTION("Texas Instruments LM3560 LED flash driver");
+MODULE_LICENSE("GPL");