Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 233 insertions, 0 deletions

diff --git a/drivers/media/i2c/max9271.h b/drivers/media/i2c/max9271.h
new file mode 100644
index 000000000..dc5e4e70b
--- /dev/null
+++ b/drivers/media/i2c/max9271.h
@@ -0,0 +1,233 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017-2020 Jacopo Mondi
+ * Copyright (C) 2017-2020 Kieran Bingham
+ * Copyright (C) 2017-2020 Laurent Pinchart
+ * Copyright (C) 2017-2020 Niklas Söderlund
+ * Copyright (C) 2016 Renesas Electronics Corporation
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ */
+
+#include <linux/i2c.h>
+
+#define MAX9271_DEFAULT_ADDR	0x40
+
+/* Register 0x02 */
+#define MAX9271_SPREAD_SPECT_0		(0 << 5)
+#define MAX9271_SPREAD_SPECT_05		(1 << 5)
+#define MAX9271_SPREAD_SPECT_15		(2 << 5)
+#define MAX9271_SPREAD_SPECT_1		(5 << 5)
+#define MAX9271_SPREAD_SPECT_2		(3 << 5)
+#define MAX9271_SPREAD_SPECT_3		(6 << 5)
+#define MAX9271_SPREAD_SPECT_4		(7 << 5)
+#define MAX9271_R02_RES			BIT(4)
+#define MAX9271_PCLK_AUTODETECT		(3 << 2)
+#define MAX9271_SERIAL_AUTODETECT	(0x03)
+/* Register 0x04 */
+#define MAX9271_SEREN			BIT(7)
+#define MAX9271_CLINKEN			BIT(6)
+#define MAX9271_PRBSEN			BIT(5)
+#define MAX9271_SLEEP			BIT(4)
+#define MAX9271_INTTYPE_I2C		(0 << 2)
+#define MAX9271_INTTYPE_UART		(1 << 2)
+#define MAX9271_INTTYPE_NONE		(2 << 2)
+#define MAX9271_REVCCEN			BIT(1)
+#define MAX9271_FWDCCEN			BIT(0)
+/* Register 0x07 */
+#define MAX9271_DBL			BIT(7)
+#define MAX9271_DRS			BIT(6)
+#define MAX9271_BWS			BIT(5)
+#define MAX9271_ES			BIT(4)
+#define MAX9271_HVEN			BIT(2)
+#define MAX9271_EDC_1BIT_PARITY		(0 << 0)
+#define MAX9271_EDC_6BIT_CRC		(1 << 0)
+#define MAX9271_EDC_6BIT_HAMMING	(2 << 0)
+/* Register 0x08 */
+#define MAX9271_INVVS			BIT(7)
+#define MAX9271_INVHS			BIT(6)
+#define MAX9271_REV_LOGAIN		BIT(3)
+#define MAX9271_REV_HIVTH		BIT(0)
+/* Register 0x09 */
+#define MAX9271_ID			0x09
+/* Register 0x0d */
+#define MAX9271_I2CLOCACK		BIT(7)
+#define MAX9271_I2CSLVSH_1046NS_469NS	(3 << 5)
+#define MAX9271_I2CSLVSH_938NS_352NS	(2 << 5)
+#define MAX9271_I2CSLVSH_469NS_234NS	(1 << 5)
+#define MAX9271_I2CSLVSH_352NS_117NS	(0 << 5)
+#define MAX9271_I2CMSTBT_837KBPS	(7 << 2)
+#define MAX9271_I2CMSTBT_533KBPS	(6 << 2)
+#define MAX9271_I2CMSTBT_339KBPS	(5 << 2)
+#define MAX9271_I2CMSTBT_173KBPS	(4 << 2)
+#define MAX9271_I2CMSTBT_105KBPS	(3 << 2)
+#define MAX9271_I2CMSTBT_84KBPS		(2 << 2)
+#define MAX9271_I2CMSTBT_28KBPS		(1 << 2)
+#define MAX9271_I2CMSTBT_8KBPS		(0 << 2)
+#define MAX9271_I2CSLVTO_NONE		(3 << 0)
+#define MAX9271_I2CSLVTO_1024US		(2 << 0)
+#define MAX9271_I2CSLVTO_256US		(1 << 0)
+#define MAX9271_I2CSLVTO_64US		(0 << 0)
+/* Register 0x0f */
+#define MAX9271_GPIO5OUT		BIT(5)
+#define MAX9271_GPIO4OUT		BIT(4)
+#define MAX9271_GPIO3OUT		BIT(3)
+#define MAX9271_GPIO2OUT		BIT(2)
+#define MAX9271_GPIO1OUT		BIT(1)
+#define MAX9271_GPO			BIT(0)
+/* Register 0x15 */
+#define MAX9271_PCLKDET			BIT(0)
+
+/**
+ * struct max9271_device - max9271 device
+ * @client: The i2c client for the max9271 instance
+ */
+struct max9271_device {
+	struct i2c_client *client;
+};
+
+/**
+ * max9271_wake_up() - Wake up the serializer by issuing an i2c transaction
+ * @dev: The max9271 device
+ *
+ * This function shall be called before any other interaction with the
+ * serializer.
+ */
+void max9271_wake_up(struct max9271_device *dev);
+
+/**
+ * max9271_set_serial_link() - Enable/disable serial link
+ * @dev: The max9271 device
+ * @enable: Serial link enable/disable flag
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_set_serial_link(struct max9271_device *dev, bool enable);
+
+/**
+ * max9271_configure_i2c() - Configure I2C bus parameters
+ * @dev: The max9271 device
+ * @i2c_config: The I2C bus configuration bit mask
+ *
+ * Configure MAX9271 I2C interface. The bus configuration provided in the
+ * @i2c_config parameter shall be assembled using bit values defined by the
+ * MAX9271_I2C* macros.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_configure_i2c(struct max9271_device *dev, u8 i2c_config);
+
+/**
+ * max9271_set_high_threshold() - Enable or disable reverse channel high
+ *				  threshold
+ * @dev: The max9271 device
+ * @enable: High threshold enable/disable flag
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_set_high_threshold(struct max9271_device *dev, bool enable);
+
+/**
+ * max9271_configure_gmsl_link() - Configure the GMSL link
+ * @dev: The max9271 device
+ *
+ * FIXME: the GMSL link configuration is currently hardcoded and performed
+ * by programming registers 0x04, 0x07 and 0x02.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_configure_gmsl_link(struct max9271_device *dev);
+
+/**
+ * max9271_set_gpios() - Set gpio lines to physical high value
+ * @dev: The max9271 device
+ * @gpio_mask: The mask of gpio lines to set to high value
+ *
+ * The @gpio_mask parameter shall be assembled using the MAX9271_GP[IO|O]*
+ * bit values.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_set_gpios(struct max9271_device *dev, u8 gpio_mask);
+
+/**
+ * max9271_clear_gpios() - Set gpio lines to physical low value
+ * @dev: The max9271 device
+ * @gpio_mask: The mask of gpio lines to set to low value
+ *
+ * The @gpio_mask parameter shall be assembled using the MAX9271_GP[IO|O]*
+ * bit values.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_clear_gpios(struct max9271_device *dev, u8 gpio_mask);
+
+/**
+ * max9271_enable_gpios() - Enable gpio lines
+ * @dev: The max9271 device
+ * @gpio_mask: The mask of gpio lines to enable
+ *
+ * The @gpio_mask parameter shall be assembled using the MAX9271_GPIO*
+ * bit values. GPO line is always enabled by default.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_enable_gpios(struct max9271_device *dev, u8 gpio_mask);
+
+/**
+ * max9271_disable_gpios() - Disable gpio lines
+ * @dev: The max9271 device
+ * @gpio_mask: The mask of gpio lines to disable
+ *
+ * The @gpio_mask parameter shall be assembled using the MAX9271_GPIO*
+ * bit values. GPO line is always enabled by default and cannot be disabled.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_disable_gpios(struct max9271_device *dev, u8 gpio_mask);
+
+/**
+ * max9271_verify_id() - Read and verify MAX9271 id
+ * @dev: The max9271 device
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_verify_id(struct max9271_device *dev);
+
+/**
+ * max9271_set_address() - Program a new I2C address
+ * @dev: The max9271 device
+ * @addr: The new I2C address in 7-bit format
+ *
+ * This function only takes care of programming the new I2C address @addr to
+ * in the MAX9271 chip registers, it is responsiblity of the caller to set
+ * the i2c address client to the @addr value to be able to communicate with
+ * the MAX9271 chip using the I2C framework APIs after this function returns.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_set_address(struct max9271_device *dev, u8 addr);
+
+/**
+ * max9271_set_deserializer_address() - Program the remote deserializer address
+ * @dev: The max9271 device
+ * @addr: The deserializer I2C address in 7-bit format
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_set_deserializer_address(struct max9271_device *dev, u8 addr);
+
+/**
+ * max9271_set_translation() - Program I2C address translation
+ * @dev: The max9271 device
+ * @source: The I2C source address
+ * @dest: The I2C destination address
+ *
+ * Program address translation from @source to @dest. This is required to
+ * communicate with local devices that do not support address reprogramming.
+ *
+ * TODO: The device supports translation of two address, this function currently
+ * supports a single one.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_set_translation(struct max9271_device *dev, u8 source, u8 dest);