Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1227 insertions, 0 deletions

diff --git a/drivers/media/i2c/ov2740.c b/drivers/media/i2c/ov2740.c
new file mode 100644
index 000000000..f3731f932
--- /dev/null
+++ b/drivers/media/i2c/ov2740.c
@@ -0,0 +1,1227 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 Intel Corporation.
+
+#include <asm/unaligned.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/nvmem-provider.h>
+#include <linux/regmap.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
+
+#define OV2740_LINK_FREQ_360MHZ		360000000ULL
+#define OV2740_SCLK			72000000LL
+#define OV2740_MCLK			19200000
+#define OV2740_DATA_LANES		2
+#define OV2740_RGB_DEPTH		10
+
+#define OV2740_REG_CHIP_ID		0x300a
+#define OV2740_CHIP_ID			0x2740
+
+#define OV2740_REG_MODE_SELECT		0x0100
+#define OV2740_MODE_STANDBY		0x00
+#define OV2740_MODE_STREAMING		0x01
+
+/* vertical-timings from sensor */
+#define OV2740_REG_VTS			0x380e
+#define OV2740_VTS_DEF			0x088a
+#define OV2740_VTS_MIN			0x0460
+#define OV2740_VTS_MAX			0x7fff
+
+/* horizontal-timings from sensor */
+#define OV2740_REG_HTS			0x380c
+
+/* Exposure controls from sensor */
+#define OV2740_REG_EXPOSURE		0x3500
+#define OV2740_EXPOSURE_MIN		4
+#define OV2740_EXPOSURE_MAX_MARGIN	8
+#define OV2740_EXPOSURE_STEP		1
+
+/* Analog gain controls from sensor */
+#define OV2740_REG_ANALOG_GAIN		0x3508
+#define OV2740_ANAL_GAIN_MIN		128
+#define OV2740_ANAL_GAIN_MAX		1983
+#define OV2740_ANAL_GAIN_STEP		1
+
+/* Digital gain controls from sensor */
+#define OV2740_REG_MWB_R_GAIN		0x500a
+#define OV2740_REG_MWB_G_GAIN		0x500c
+#define OV2740_REG_MWB_B_GAIN		0x500e
+#define OV2740_DGTL_GAIN_MIN		1024
+#define OV2740_DGTL_GAIN_MAX		4095
+#define OV2740_DGTL_GAIN_STEP		1
+#define OV2740_DGTL_GAIN_DEFAULT	1024
+
+/* Test Pattern Control */
+#define OV2740_REG_TEST_PATTERN		0x5040
+#define OV2740_TEST_PATTERN_ENABLE	BIT(7)
+#define OV2740_TEST_PATTERN_BAR_SHIFT	2
+
+/* Group Access */
+#define OV2740_REG_GROUP_ACCESS		0x3208
+#define OV2740_GROUP_HOLD_START		0x0
+#define OV2740_GROUP_HOLD_END		0x10
+#define OV2740_GROUP_HOLD_LAUNCH	0xa0
+
+/* ISP CTRL00 */
+#define OV2740_REG_ISP_CTRL00		0x5000
+/* ISP CTRL01 */
+#define OV2740_REG_ISP_CTRL01		0x5001
+/* Customer Addresses: 0x7010 - 0x710F */
+#define CUSTOMER_USE_OTP_SIZE		0x100
+/* OTP registers from sensor */
+#define OV2740_REG_OTP_CUSTOMER		0x7010
+
+struct nvm_data {
+	struct nvmem_device *nvmem;
+	struct regmap *regmap;
+	char *nvm_buffer;
+};
+
+enum {
+	OV2740_LINK_FREQ_360MHZ_INDEX,
+};
+
+struct ov2740_reg {
+	u16 address;
+	u8 val;
+};
+
+struct ov2740_reg_list {
+	u32 num_of_regs;
+	const struct ov2740_reg *regs;
+};
+
+struct ov2740_link_freq_config {
+	const struct ov2740_reg_list reg_list;
+};
+
+struct ov2740_mode {
+	/* Frame width in pixels */
+	u32 width;
+
+	/* Frame height in pixels */
+	u32 height;
+
+	/* Horizontal timining size */
+	u32 hts;
+
+	/* Default vertical timining size */
+	u32 vts_def;
+
+	/* Min vertical timining size */
+	u32 vts_min;
+
+	/* Link frequency needed for this resolution */
+	u32 link_freq_index;
+
+	/* Sensor register settings for this resolution */
+	const struct ov2740_reg_list reg_list;
+};
+
+static const struct ov2740_reg mipi_data_rate_720mbps[] = {
+	{0x0103, 0x01},
+	{0x0302, 0x4b},
+	{0x030d, 0x4b},
+	{0x030e, 0x02},
+	{0x030a, 0x01},
+	{0x0312, 0x11},
+};
+
+static const struct ov2740_reg mode_1932x1092_regs[] = {
+	{0x3000, 0x00},
+	{0x3018, 0x32},
+	{0x3031, 0x0a},
+	{0x3080, 0x08},
+	{0x3083, 0xB4},
+	{0x3103, 0x00},
+	{0x3104, 0x01},
+	{0x3106, 0x01},
+	{0x3500, 0x00},
+	{0x3501, 0x44},
+	{0x3502, 0x40},
+	{0x3503, 0x88},
+	{0x3507, 0x00},
+	{0x3508, 0x00},
+	{0x3509, 0x80},
+	{0x350c, 0x00},
+	{0x350d, 0x80},
+	{0x3510, 0x00},
+	{0x3511, 0x00},
+	{0x3512, 0x20},
+	{0x3632, 0x00},
+	{0x3633, 0x10},
+	{0x3634, 0x10},
+	{0x3635, 0x10},
+	{0x3645, 0x13},
+	{0x3646, 0x81},
+	{0x3636, 0x10},
+	{0x3651, 0x0a},
+	{0x3656, 0x02},
+	{0x3659, 0x04},
+	{0x365a, 0xda},
+	{0x365b, 0xa2},
+	{0x365c, 0x04},
+	{0x365d, 0x1d},
+	{0x365e, 0x1a},
+	{0x3662, 0xd7},
+	{0x3667, 0x78},
+	{0x3669, 0x0a},
+	{0x366a, 0x92},
+	{0x3700, 0x54},
+	{0x3702, 0x10},
+	{0x3706, 0x42},
+	{0x3709, 0x30},
+	{0x370b, 0xc2},
+	{0x3714, 0x63},
+	{0x3715, 0x01},
+	{0x3716, 0x00},
+	{0x371a, 0x3e},
+	{0x3732, 0x0e},
+	{0x3733, 0x10},
+	{0x375f, 0x0e},
+	{0x3768, 0x30},
+	{0x3769, 0x44},
+	{0x376a, 0x22},
+	{0x377b, 0x20},
+	{0x377c, 0x00},
+	{0x377d, 0x0c},
+	{0x3798, 0x00},
+	{0x37a1, 0x55},
+	{0x37a8, 0x6d},
+	{0x37c2, 0x04},
+	{0x37c5, 0x00},
+	{0x37c8, 0x00},
+	{0x3800, 0x00},
+	{0x3801, 0x00},
+	{0x3802, 0x00},
+	{0x3803, 0x00},
+	{0x3804, 0x07},
+	{0x3805, 0x8f},
+	{0x3806, 0x04},
+	{0x3807, 0x47},
+	{0x3808, 0x07},
+	{0x3809, 0x88},
+	{0x380a, 0x04},
+	{0x380b, 0x40},
+	{0x380c, 0x04},
+	{0x380d, 0x38},
+	{0x380e, 0x04},
+	{0x380f, 0x60},
+	{0x3810, 0x00},
+	{0x3811, 0x04},
+	{0x3812, 0x00},
+	{0x3813, 0x04},
+	{0x3814, 0x01},
+	{0x3815, 0x01},
+	{0x3820, 0x80},
+	{0x3821, 0x46},
+	{0x3822, 0x84},
+	{0x3829, 0x00},
+	{0x382a, 0x01},
+	{0x382b, 0x01},
+	{0x3830, 0x04},
+	{0x3836, 0x01},
+	{0x3837, 0x08},
+	{0x3839, 0x01},
+	{0x383a, 0x00},
+	{0x383b, 0x08},
+	{0x383c, 0x00},
+	{0x3f0b, 0x00},
+	{0x4001, 0x20},
+	{0x4009, 0x07},
+	{0x4003, 0x10},
+	{0x4010, 0xe0},
+	{0x4016, 0x00},
+	{0x4017, 0x10},
+	{0x4044, 0x02},
+	{0x4304, 0x08},
+	{0x4307, 0x30},
+	{0x4320, 0x80},
+	{0x4322, 0x00},
+	{0x4323, 0x00},
+	{0x4324, 0x00},
+	{0x4325, 0x00},
+	{0x4326, 0x00},
+	{0x4327, 0x00},
+	{0x4328, 0x00},
+	{0x4329, 0x00},
+	{0x432c, 0x03},
+	{0x432d, 0x81},
+	{0x4501, 0x84},
+	{0x4502, 0x40},
+	{0x4503, 0x18},
+	{0x4504, 0x04},
+	{0x4508, 0x02},
+	{0x4601, 0x10},
+	{0x4800, 0x00},
+	{0x4816, 0x52},
+	{0x4837, 0x16},
+	{0x5000, 0x7f},
+	{0x5001, 0x00},
+	{0x5005, 0x38},
+	{0x501e, 0x0d},
+	{0x5040, 0x00},
+	{0x5901, 0x00},
+	{0x3800, 0x00},
+	{0x3801, 0x00},
+	{0x3802, 0x00},
+	{0x3803, 0x00},
+	{0x3804, 0x07},
+	{0x3805, 0x8f},
+	{0x3806, 0x04},
+	{0x3807, 0x47},
+	{0x3808, 0x07},
+	{0x3809, 0x8c},
+	{0x380a, 0x04},
+	{0x380b, 0x44},
+	{0x3810, 0x00},
+	{0x3811, 0x00},
+	{0x3812, 0x00},
+	{0x3813, 0x01},
+};
+
+static const char * const ov2740_test_pattern_menu[] = {
+	"Disabled",
+	"Color Bar",
+	"Top-Bottom Darker Color Bar",
+	"Right-Left Darker Color Bar",
+	"Bottom-Top Darker Color Bar",
+};
+
+static const s64 link_freq_menu_items[] = {
+	OV2740_LINK_FREQ_360MHZ,
+};
+
+static const struct ov2740_link_freq_config link_freq_configs[] = {
+	[OV2740_LINK_FREQ_360MHZ_INDEX] = {
+		.reg_list = {
+			.num_of_regs = ARRAY_SIZE(mipi_data_rate_720mbps),
+			.regs = mipi_data_rate_720mbps,
+		}
+	},
+};
+
+static const struct ov2740_mode supported_modes[] = {
+	{
+		.width = 1932,
+		.height = 1092,
+		.hts = 1080,
+		.vts_def = OV2740_VTS_DEF,
+		.vts_min = OV2740_VTS_MIN,
+		.reg_list = {
+			.num_of_regs = ARRAY_SIZE(mode_1932x1092_regs),
+			.regs = mode_1932x1092_regs,
+		},
+		.link_freq_index = OV2740_LINK_FREQ_360MHZ_INDEX,
+	},
+};
+
+struct ov2740 {
+	struct v4l2_subdev sd;
+	struct media_pad pad;
+	struct v4l2_ctrl_handler ctrl_handler;
+
+	/* V4L2 Controls */
+	struct v4l2_ctrl *link_freq;
+	struct v4l2_ctrl *pixel_rate;
+	struct v4l2_ctrl *vblank;
+	struct v4l2_ctrl *hblank;
+	struct v4l2_ctrl *exposure;
+
+	/* Current mode */
+	const struct ov2740_mode *cur_mode;
+
+	/* To serialize asynchronus callbacks */
+	struct mutex mutex;
+
+	/* Streaming on/off */
+	bool streaming;
+
+	/* NVM data inforamtion */
+	struct nvm_data *nvm;
+
+	/* True if the device has been identified */
+	bool identified;
+};
+
+static inline struct ov2740 *to_ov2740(struct v4l2_subdev *subdev)
+{
+	return container_of(subdev, struct ov2740, sd);
+}
+
+static u64 to_pixel_rate(u32 f_index)
+{
+	u64 pixel_rate = link_freq_menu_items[f_index] * 2 * OV2740_DATA_LANES;
+
+	do_div(pixel_rate, OV2740_RGB_DEPTH);
+
+	return pixel_rate;
+}
+
+static u64 to_pixels_per_line(u32 hts, u32 f_index)
+{
+	u64 ppl = hts * to_pixel_rate(f_index);
+
+	do_div(ppl, OV2740_SCLK);
+
+	return ppl;
+}
+
+static int ov2740_read_reg(struct ov2740 *ov2740, u16 reg, u16 len, u32 *val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&ov2740->sd);
+	struct i2c_msg msgs[2];
+	u8 addr_buf[2];
+	u8 data_buf[4] = {0};
+	int ret;
+
+	if (len > sizeof(data_buf))
+		return -EINVAL;
+
+	put_unaligned_be16(reg, addr_buf);
+	msgs[0].addr = client->addr;
+	msgs[0].flags = 0;
+	msgs[0].len = sizeof(addr_buf);
+	msgs[0].buf = addr_buf;
+	msgs[1].addr = client->addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = len;
+	msgs[1].buf = &data_buf[sizeof(data_buf) - len];
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret != ARRAY_SIZE(msgs))
+		return ret < 0 ? ret : -EIO;
+
+	*val = get_unaligned_be32(data_buf);
+
+	return 0;
+}
+
+static int ov2740_write_reg(struct ov2740 *ov2740, u16 reg, u16 len, u32 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&ov2740->sd);
+	u8 buf[6];
+	int ret;
+
+	if (len > 4)
+		return -EINVAL;
+
+	put_unaligned_be16(reg, buf);
+	put_unaligned_be32(val << 8 * (4 - len), buf + 2);
+
+	ret = i2c_master_send(client, buf, len + 2);
+	if (ret != len + 2)
+		return ret < 0 ? ret : -EIO;
+
+	return 0;
+}
+
+static int ov2740_write_reg_list(struct ov2740 *ov2740,
+				 const struct ov2740_reg_list *r_list)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&ov2740->sd);
+	unsigned int i;
+	int ret;
+
+	for (i = 0; i < r_list->num_of_regs; i++) {
+		ret = ov2740_write_reg(ov2740, r_list->regs[i].address, 1,
+				       r_list->regs[i].val);
+		if (ret) {
+			dev_err_ratelimited(&client->dev,
+					    "write reg 0x%4.4x return err = %d\n",
+					    r_list->regs[i].address, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int ov2740_identify_module(struct ov2740 *ov2740)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&ov2740->sd);
+	int ret;
+	u32 val;
+
+	if (ov2740->identified)
+		return 0;
+
+	ret = ov2740_read_reg(ov2740, OV2740_REG_CHIP_ID, 3, &val);
+	if (ret)
+		return ret;
+
+	if (val != OV2740_CHIP_ID) {
+		dev_err(&client->dev, "chip id mismatch: %x != %x\n",
+			OV2740_CHIP_ID, val);
+		return -ENXIO;
+	}
+
+	ov2740->identified = true;
+
+	return 0;
+}
+
+static int ov2740_update_digital_gain(struct ov2740 *ov2740, u32 d_gain)
+{
+	int ret;
+
+	ret = ov2740_write_reg(ov2740, OV2740_REG_GROUP_ACCESS, 1,
+			       OV2740_GROUP_HOLD_START);
+	if (ret)
+		return ret;
+
+	ret = ov2740_write_reg(ov2740, OV2740_REG_MWB_R_GAIN, 2, d_gain);
+	if (ret)
+		return ret;
+
+	ret = ov2740_write_reg(ov2740, OV2740_REG_MWB_G_GAIN, 2, d_gain);
+	if (ret)
+		return ret;
+
+	ret = ov2740_write_reg(ov2740, OV2740_REG_MWB_B_GAIN, 2, d_gain);
+	if (ret)
+		return ret;
+
+	ret = ov2740_write_reg(ov2740, OV2740_REG_GROUP_ACCESS, 1,
+			       OV2740_GROUP_HOLD_END);
+	if (ret)
+		return ret;
+
+	ret = ov2740_write_reg(ov2740, OV2740_REG_GROUP_ACCESS, 1,
+			       OV2740_GROUP_HOLD_LAUNCH);
+	return ret;
+}
+
+static int ov2740_test_pattern(struct ov2740 *ov2740, u32 pattern)
+{
+	if (pattern)
+		pattern = (pattern - 1) << OV2740_TEST_PATTERN_BAR_SHIFT |
+			  OV2740_TEST_PATTERN_ENABLE;
+
+	return ov2740_write_reg(ov2740, OV2740_REG_TEST_PATTERN, 1, pattern);
+}
+
+static int ov2740_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct ov2740 *ov2740 = container_of(ctrl->handler,
+					     struct ov2740, ctrl_handler);
+	struct i2c_client *client = v4l2_get_subdevdata(&ov2740->sd);
+	s64 exposure_max;
+	int ret;
+
+	/* Propagate change of current control to all related controls */
+	if (ctrl->id == V4L2_CID_VBLANK) {
+		/* Update max exposure while meeting expected vblanking */
+		exposure_max = ov2740->cur_mode->height + ctrl->val -
+			       OV2740_EXPOSURE_MAX_MARGIN;
+		__v4l2_ctrl_modify_range(ov2740->exposure,
+					 ov2740->exposure->minimum,
+					 exposure_max, ov2740->exposure->step,
+					 exposure_max);
+	}
+
+	/* V4L2 controls values will be applied only when power is already up */
+	if (!pm_runtime_get_if_in_use(&client->dev))
+		return 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_ANALOGUE_GAIN:
+		ret = ov2740_write_reg(ov2740, OV2740_REG_ANALOG_GAIN, 2,
+				       ctrl->val);
+		break;
+
+	case V4L2_CID_DIGITAL_GAIN:
+		ret = ov2740_update_digital_gain(ov2740, ctrl->val);
+		break;
+
+	case V4L2_CID_EXPOSURE:
+		/* 4 least significant bits of expsoure are fractional part */
+		ret = ov2740_write_reg(ov2740, OV2740_REG_EXPOSURE, 3,
+				       ctrl->val << 4);
+		break;
+
+	case V4L2_CID_VBLANK:
+		ret = ov2740_write_reg(ov2740, OV2740_REG_VTS, 2,
+				       ov2740->cur_mode->height + ctrl->val);
+		break;
+
+	case V4L2_CID_TEST_PATTERN:
+		ret = ov2740_test_pattern(ov2740, ctrl->val);
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	pm_runtime_put(&client->dev);
+
+	return ret;
+}
+
+static const struct v4l2_ctrl_ops ov2740_ctrl_ops = {
+	.s_ctrl = ov2740_set_ctrl,
+};
+
+static int ov2740_init_controls(struct ov2740 *ov2740)
+{
+	struct v4l2_ctrl_handler *ctrl_hdlr;
+	const struct ov2740_mode *cur_mode;
+	s64 exposure_max, h_blank, pixel_rate;
+	u32 vblank_min, vblank_max, vblank_default;
+	int size;
+	int ret;
+
+	ctrl_hdlr = &ov2740->ctrl_handler;
+	ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8);
+	if (ret)
+		return ret;
+
+	ctrl_hdlr->lock = &ov2740->mutex;
+	cur_mode = ov2740->cur_mode;
+	size = ARRAY_SIZE(link_freq_menu_items);
+
+	ov2740->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr, &ov2740_ctrl_ops,
+						   V4L2_CID_LINK_FREQ,
+						   size - 1, 0,
+						   link_freq_menu_items);
+	if (ov2740->link_freq)
+		ov2740->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+	pixel_rate = to_pixel_rate(OV2740_LINK_FREQ_360MHZ_INDEX);
+	ov2740->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &ov2740_ctrl_ops,
+					       V4L2_CID_PIXEL_RATE, 0,
+					       pixel_rate, 1, pixel_rate);
+
+	vblank_min = cur_mode->vts_min - cur_mode->height;
+	vblank_max = OV2740_VTS_MAX - cur_mode->height;
+	vblank_default = cur_mode->vts_def - cur_mode->height;
+	ov2740->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &ov2740_ctrl_ops,
+					   V4L2_CID_VBLANK, vblank_min,
+					   vblank_max, 1, vblank_default);
+
+	h_blank = to_pixels_per_line(cur_mode->hts, cur_mode->link_freq_index);
+	h_blank -= cur_mode->width;
+	ov2740->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &ov2740_ctrl_ops,
+					   V4L2_CID_HBLANK, h_blank, h_blank, 1,
+					   h_blank);
+	if (ov2740->hblank)
+		ov2740->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+	v4l2_ctrl_new_std(ctrl_hdlr, &ov2740_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
+			  OV2740_ANAL_GAIN_MIN, OV2740_ANAL_GAIN_MAX,
+			  OV2740_ANAL_GAIN_STEP, OV2740_ANAL_GAIN_MIN);
+	v4l2_ctrl_new_std(ctrl_hdlr, &ov2740_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
+			  OV2740_DGTL_GAIN_MIN, OV2740_DGTL_GAIN_MAX,
+			  OV2740_DGTL_GAIN_STEP, OV2740_DGTL_GAIN_DEFAULT);
+	exposure_max = cur_mode->vts_def - OV2740_EXPOSURE_MAX_MARGIN;
+	ov2740->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &ov2740_ctrl_ops,
+					     V4L2_CID_EXPOSURE,
+					     OV2740_EXPOSURE_MIN, exposure_max,
+					     OV2740_EXPOSURE_STEP,
+					     exposure_max);
+	v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &ov2740_ctrl_ops,
+				     V4L2_CID_TEST_PATTERN,
+				     ARRAY_SIZE(ov2740_test_pattern_menu) - 1,
+				     0, 0, ov2740_test_pattern_menu);
+	if (ctrl_hdlr->error)
+		return ctrl_hdlr->error;
+
+	ov2740->sd.ctrl_handler = ctrl_hdlr;
+
+	return 0;
+}
+
+static void ov2740_update_pad_format(const struct ov2740_mode *mode,
+				     struct v4l2_mbus_framefmt *fmt)
+{
+	fmt->width = mode->width;
+	fmt->height = mode->height;
+	fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
+	fmt->field = V4L2_FIELD_NONE;
+}
+
+static int ov2740_load_otp_data(struct nvm_data *nvm)
+{
+	struct device *dev = regmap_get_device(nvm->regmap);
+	struct ov2740 *ov2740 = to_ov2740(dev_get_drvdata(dev));
+	u32 isp_ctrl00 = 0;
+	u32 isp_ctrl01 = 0;
+	int ret;
+
+	if (nvm->nvm_buffer)
+		return 0;
+
+	nvm->nvm_buffer = kzalloc(CUSTOMER_USE_OTP_SIZE, GFP_KERNEL);
+	if (!nvm->nvm_buffer)
+		return -ENOMEM;
+
+	ret = ov2740_read_reg(ov2740, OV2740_REG_ISP_CTRL00, 1, &isp_ctrl00);
+	if (ret) {
+		dev_err(dev, "failed to read ISP CTRL00\n");
+		goto err;
+	}
+
+	ret = ov2740_read_reg(ov2740, OV2740_REG_ISP_CTRL01, 1, &isp_ctrl01);
+	if (ret) {
+		dev_err(dev, "failed to read ISP CTRL01\n");
+		goto err;
+	}
+
+	/* Clear bit 5 of ISP CTRL00 */
+	ret = ov2740_write_reg(ov2740, OV2740_REG_ISP_CTRL00, 1,
+			       isp_ctrl00 & ~BIT(5));
+	if (ret) {
+		dev_err(dev, "failed to set ISP CTRL00\n");
+		goto err;
+	}
+
+	/* Clear bit 7 of ISP CTRL01 */
+	ret = ov2740_write_reg(ov2740, OV2740_REG_ISP_CTRL01, 1,
+			       isp_ctrl01 & ~BIT(7));
+	if (ret) {
+		dev_err(dev, "failed to set ISP CTRL01\n");
+		goto err;
+	}
+
+	ret = ov2740_write_reg(ov2740, OV2740_REG_MODE_SELECT, 1,
+			       OV2740_MODE_STREAMING);
+	if (ret) {
+		dev_err(dev, "failed to set streaming mode\n");
+		goto err;
+	}
+
+	/*
+	 * Users are not allowed to access OTP-related registers and memory
+	 * during the 20 ms period after streaming starts (0x100 = 0x01).
+	 */
+	msleep(20);
+
+	ret = regmap_bulk_read(nvm->regmap, OV2740_REG_OTP_CUSTOMER,
+			       nvm->nvm_buffer, CUSTOMER_USE_OTP_SIZE);
+	if (ret) {
+		dev_err(dev, "failed to read OTP data, ret %d\n", ret);
+		goto err;
+	}
+
+	ret = ov2740_write_reg(ov2740, OV2740_REG_MODE_SELECT, 1,
+			       OV2740_MODE_STANDBY);
+	if (ret) {
+		dev_err(dev, "failed to set streaming mode\n");
+		goto err;
+	}
+
+	ret = ov2740_write_reg(ov2740, OV2740_REG_ISP_CTRL01, 1, isp_ctrl01);
+	if (ret) {
+		dev_err(dev, "failed to set ISP CTRL01\n");
+		goto err;
+	}
+
+	ret = ov2740_write_reg(ov2740, OV2740_REG_ISP_CTRL00, 1, isp_ctrl00);
+	if (ret) {
+		dev_err(dev, "failed to set ISP CTRL00\n");
+		goto err;
+	}
+
+	return 0;
+err:
+	kfree(nvm->nvm_buffer);
+	nvm->nvm_buffer = NULL;
+
+	return ret;
+}
+
+static int ov2740_start_streaming(struct ov2740 *ov2740)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&ov2740->sd);
+	const struct ov2740_reg_list *reg_list;
+	int link_freq_index;
+	int ret;
+
+	ret = ov2740_identify_module(ov2740);
+	if (ret)
+		return ret;
+
+	if (ov2740->nvm)
+		ov2740_load_otp_data(ov2740->nvm);
+
+	link_freq_index = ov2740->cur_mode->link_freq_index;
+	reg_list = &link_freq_configs[link_freq_index].reg_list;
+	ret = ov2740_write_reg_list(ov2740, reg_list);
+	if (ret) {
+		dev_err(&client->dev, "failed to set plls\n");
+		return ret;
+	}
+
+	reg_list = &ov2740->cur_mode->reg_list;
+	ret = ov2740_write_reg_list(ov2740, reg_list);
+	if (ret) {
+		dev_err(&client->dev, "failed to set mode\n");
+		return ret;
+	}
+
+	ret = __v4l2_ctrl_handler_setup(ov2740->sd.ctrl_handler);
+	if (ret)
+		return ret;
+
+	ret = ov2740_write_reg(ov2740, OV2740_REG_MODE_SELECT, 1,
+			       OV2740_MODE_STREAMING);
+	if (ret)
+		dev_err(&client->dev, "failed to start streaming\n");
+
+	return ret;
+}
+
+static void ov2740_stop_streaming(struct ov2740 *ov2740)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&ov2740->sd);
+
+	if (ov2740_write_reg(ov2740, OV2740_REG_MODE_SELECT, 1,
+			     OV2740_MODE_STANDBY))
+		dev_err(&client->dev, "failed to stop streaming\n");
+}
+
+static int ov2740_set_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct ov2740 *ov2740 = to_ov2740(sd);
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	int ret = 0;
+
+	if (ov2740->streaming == enable)
+		return 0;
+
+	mutex_lock(&ov2740->mutex);
+	if (enable) {
+		ret = pm_runtime_resume_and_get(&client->dev);
+		if (ret < 0) {
+			mutex_unlock(&ov2740->mutex);
+			return ret;
+		}
+
+		ret = ov2740_start_streaming(ov2740);
+		if (ret) {
+			enable = 0;
+			ov2740_stop_streaming(ov2740);
+			pm_runtime_put(&client->dev);
+		}
+	} else {
+		ov2740_stop_streaming(ov2740);
+		pm_runtime_put(&client->dev);
+	}
+
+	ov2740->streaming = enable;
+	mutex_unlock(&ov2740->mutex);
+
+	return ret;
+}
+
+static int ov2740_suspend(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct ov2740 *ov2740 = to_ov2740(sd);
+
+	mutex_lock(&ov2740->mutex);
+	if (ov2740->streaming)
+		ov2740_stop_streaming(ov2740);
+
+	mutex_unlock(&ov2740->mutex);
+
+	return 0;
+}
+
+static int ov2740_resume(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct ov2740 *ov2740 = to_ov2740(sd);
+	int ret = 0;
+
+	mutex_lock(&ov2740->mutex);
+	if (!ov2740->streaming)
+		goto exit;
+
+	ret = ov2740_start_streaming(ov2740);
+	if (ret) {
+		ov2740->streaming = false;
+		ov2740_stop_streaming(ov2740);
+	}
+
+exit:
+	mutex_unlock(&ov2740->mutex);
+	return ret;
+}
+
+static int ov2740_set_format(struct v4l2_subdev *sd,
+			     struct v4l2_subdev_state *sd_state,
+			     struct v4l2_subdev_format *fmt)
+{
+	struct ov2740 *ov2740 = to_ov2740(sd);
+	const struct ov2740_mode *mode;
+	s32 vblank_def, h_blank;
+
+	mode = v4l2_find_nearest_size(supported_modes,
+				      ARRAY_SIZE(supported_modes), width,
+				      height, fmt->format.width,
+				      fmt->format.height);
+
+	mutex_lock(&ov2740->mutex);
+	ov2740_update_pad_format(mode, &fmt->format);
+	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+		*v4l2_subdev_get_try_format(sd, sd_state, fmt->pad) = fmt->format;
+	} else {
+		ov2740->cur_mode = mode;
+		__v4l2_ctrl_s_ctrl(ov2740->link_freq, mode->link_freq_index);
+		__v4l2_ctrl_s_ctrl_int64(ov2740->pixel_rate,
+					 to_pixel_rate(mode->link_freq_index));
+
+		/* Update limits and set FPS to default */
+		vblank_def = mode->vts_def - mode->height;
+		__v4l2_ctrl_modify_range(ov2740->vblank,
+					 mode->vts_min - mode->height,
+					 OV2740_VTS_MAX - mode->height, 1,
+					 vblank_def);
+		__v4l2_ctrl_s_ctrl(ov2740->vblank, vblank_def);
+		h_blank = to_pixels_per_line(mode->hts, mode->link_freq_index) -
+			  mode->width;
+		__v4l2_ctrl_modify_range(ov2740->hblank, h_blank, h_blank, 1,
+					 h_blank);
+	}
+	mutex_unlock(&ov2740->mutex);
+
+	return 0;
+}
+
+static int ov2740_get_format(struct v4l2_subdev *sd,
+			     struct v4l2_subdev_state *sd_state,
+			     struct v4l2_subdev_format *fmt)
+{
+	struct ov2740 *ov2740 = to_ov2740(sd);
+
+	mutex_lock(&ov2740->mutex);
+	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
+		fmt->format = *v4l2_subdev_get_try_format(&ov2740->sd,
+							  sd_state,
+							  fmt->pad);
+	else
+		ov2740_update_pad_format(ov2740->cur_mode, &fmt->format);
+
+	mutex_unlock(&ov2740->mutex);
+
+	return 0;
+}
+
+static int ov2740_enum_mbus_code(struct v4l2_subdev *sd,
+				 struct v4l2_subdev_state *sd_state,
+				 struct v4l2_subdev_mbus_code_enum *code)
+{
+	if (code->index > 0)
+		return -EINVAL;
+
+	code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
+
+	return 0;
+}
+
+static int ov2740_enum_frame_size(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_state *sd_state,
+				  struct v4l2_subdev_frame_size_enum *fse)
+{
+	if (fse->index >= ARRAY_SIZE(supported_modes))
+		return -EINVAL;
+
+	if (fse->code != MEDIA_BUS_FMT_SGRBG10_1X10)
+		return -EINVAL;
+
+	fse->min_width = supported_modes[fse->index].width;
+	fse->max_width = fse->min_width;
+	fse->min_height = supported_modes[fse->index].height;
+	fse->max_height = fse->min_height;
+
+	return 0;
+}
+
+static int ov2740_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	struct ov2740 *ov2740 = to_ov2740(sd);
+
+	mutex_lock(&ov2740->mutex);
+	ov2740_update_pad_format(&supported_modes[0],
+				 v4l2_subdev_get_try_format(sd, fh->state, 0));
+	mutex_unlock(&ov2740->mutex);
+
+	return 0;
+}
+
+static const struct v4l2_subdev_video_ops ov2740_video_ops = {
+	.s_stream = ov2740_set_stream,
+};
+
+static const struct v4l2_subdev_pad_ops ov2740_pad_ops = {
+	.set_fmt = ov2740_set_format,
+	.get_fmt = ov2740_get_format,
+	.enum_mbus_code = ov2740_enum_mbus_code,
+	.enum_frame_size = ov2740_enum_frame_size,
+};
+
+static const struct v4l2_subdev_ops ov2740_subdev_ops = {
+	.video = &ov2740_video_ops,
+	.pad = &ov2740_pad_ops,
+};
+
+static const struct media_entity_operations ov2740_subdev_entity_ops = {
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+static const struct v4l2_subdev_internal_ops ov2740_internal_ops = {
+	.open = ov2740_open,
+};
+
+static int ov2740_check_hwcfg(struct device *dev)
+{
+	struct fwnode_handle *ep;
+	struct fwnode_handle *fwnode = dev_fwnode(dev);
+	struct v4l2_fwnode_endpoint bus_cfg = {
+		.bus_type = V4L2_MBUS_CSI2_DPHY
+	};
+	u32 mclk;
+	int ret;
+	unsigned int i, j;
+
+	ret = fwnode_property_read_u32(fwnode, "clock-frequency", &mclk);
+	if (ret)
+		return ret;
+
+	if (mclk != OV2740_MCLK)
+		return dev_err_probe(dev, -EINVAL,
+				     "external clock %d is not supported\n",
+				     mclk);
+
+	ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
+	if (!ep)
+		return -ENXIO;
+
+	ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
+	fwnode_handle_put(ep);
+	if (ret)
+		return ret;
+
+	if (bus_cfg.bus.mipi_csi2.num_data_lanes != OV2740_DATA_LANES) {
+		ret = dev_err_probe(dev, -EINVAL,
+				    "number of CSI2 data lanes %d is not supported\n",
+				    bus_cfg.bus.mipi_csi2.num_data_lanes);
+		goto check_hwcfg_error;
+	}
+
+	if (!bus_cfg.nr_of_link_frequencies) {
+		ret = dev_err_probe(dev, -EINVAL, "no link frequencies defined\n");
+		goto check_hwcfg_error;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(link_freq_menu_items); i++) {
+		for (j = 0; j < bus_cfg.nr_of_link_frequencies; j++) {
+			if (link_freq_menu_items[i] ==
+				bus_cfg.link_frequencies[j])
+				break;
+		}
+
+		if (j == bus_cfg.nr_of_link_frequencies) {
+			ret = dev_err_probe(dev, -EINVAL,
+					    "no link frequency %lld supported\n",
+					    link_freq_menu_items[i]);
+			goto check_hwcfg_error;
+		}
+	}
+
+check_hwcfg_error:
+	v4l2_fwnode_endpoint_free(&bus_cfg);
+
+	return ret;
+}
+
+static void ov2740_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct ov2740 *ov2740 = to_ov2740(sd);
+
+	v4l2_async_unregister_subdev(sd);
+	media_entity_cleanup(&sd->entity);
+	v4l2_ctrl_handler_free(sd->ctrl_handler);
+	pm_runtime_disable(&client->dev);
+	mutex_destroy(&ov2740->mutex);
+}
+
+static int ov2740_nvmem_read(void *priv, unsigned int off, void *val,
+			     size_t count)
+{
+	struct nvm_data *nvm = priv;
+	struct device *dev = regmap_get_device(nvm->regmap);
+	struct ov2740 *ov2740 = to_ov2740(dev_get_drvdata(dev));
+	int ret = 0;
+
+	mutex_lock(&ov2740->mutex);
+
+	if (nvm->nvm_buffer) {
+		memcpy(val, nvm->nvm_buffer + off, count);
+		goto exit;
+	}
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0) {
+		goto exit;
+	}
+
+	ret = ov2740_load_otp_data(nvm);
+	if (!ret)
+		memcpy(val, nvm->nvm_buffer + off, count);
+
+	pm_runtime_put(dev);
+exit:
+	mutex_unlock(&ov2740->mutex);
+	return ret;
+}
+
+static int ov2740_register_nvmem(struct i2c_client *client,
+				 struct ov2740 *ov2740)
+{
+	struct nvm_data *nvm;
+	struct regmap_config regmap_config = { };
+	struct nvmem_config nvmem_config = { };
+	struct regmap *regmap;
+	struct device *dev = &client->dev;
+
+	nvm = devm_kzalloc(dev, sizeof(*nvm), GFP_KERNEL);
+	if (!nvm)
+		return -ENOMEM;
+
+	regmap_config.val_bits = 8;
+	regmap_config.reg_bits = 16;
+	regmap_config.disable_locking = true;
+	regmap = devm_regmap_init_i2c(client, &regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	nvm->regmap = regmap;
+
+	nvmem_config.name = dev_name(dev);
+	nvmem_config.dev = dev;
+	nvmem_config.read_only = true;
+	nvmem_config.root_only = true;
+	nvmem_config.owner = THIS_MODULE;
+	nvmem_config.compat = true;
+	nvmem_config.base_dev = dev;
+	nvmem_config.reg_read = ov2740_nvmem_read;
+	nvmem_config.reg_write = NULL;
+	nvmem_config.priv = nvm;
+	nvmem_config.stride = 1;
+	nvmem_config.word_size = 1;
+	nvmem_config.size = CUSTOMER_USE_OTP_SIZE;
+
+	nvm->nvmem = devm_nvmem_register(dev, &nvmem_config);
+	if (IS_ERR(nvm->nvmem))
+		return PTR_ERR(nvm->nvmem);
+
+	ov2740->nvm = nvm;
+	return 0;
+}
+
+static int ov2740_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct ov2740 *ov2740;
+	bool full_power;
+	int ret;
+
+	ret = ov2740_check_hwcfg(&client->dev);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to check HW configuration\n");
+
+	ov2740 = devm_kzalloc(&client->dev, sizeof(*ov2740), GFP_KERNEL);
+	if (!ov2740)
+		return -ENOMEM;
+
+	v4l2_i2c_subdev_init(&ov2740->sd, client, &ov2740_subdev_ops);
+	full_power = acpi_dev_state_d0(&client->dev);
+	if (full_power) {
+		ret = ov2740_identify_module(ov2740);
+		if (ret)
+			return dev_err_probe(dev, ret, "failed to find sensor\n");
+	}
+
+	mutex_init(&ov2740->mutex);
+	ov2740->cur_mode = &supported_modes[0];
+	ret = ov2740_init_controls(ov2740);
+	if (ret) {
+		dev_err_probe(dev, ret, "failed to init controls\n");
+		goto probe_error_v4l2_ctrl_handler_free;
+	}
+
+	ov2740->sd.internal_ops = &ov2740_internal_ops;
+	ov2740->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	ov2740->sd.entity.ops = &ov2740_subdev_entity_ops;
+	ov2740->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
+	ov2740->pad.flags = MEDIA_PAD_FL_SOURCE;
+	ret = media_entity_pads_init(&ov2740->sd.entity, 1, &ov2740->pad);
+	if (ret) {
+		dev_err_probe(dev, ret, "failed to init entity pads\n");
+		goto probe_error_v4l2_ctrl_handler_free;
+	}
+
+	ret = v4l2_async_register_subdev_sensor(&ov2740->sd);
+	if (ret < 0) {
+		dev_err_probe(dev, ret, "failed to register V4L2 subdev\n");
+		goto probe_error_media_entity_cleanup;
+	}
+
+	ret = ov2740_register_nvmem(client, ov2740);
+	if (ret)
+		dev_warn(&client->dev, "register nvmem failed, ret %d\n", ret);
+
+	/* Set the device's state to active if it's in D0 state. */
+	if (full_power)
+		pm_runtime_set_active(&client->dev);
+	pm_runtime_enable(&client->dev);
+	pm_runtime_idle(&client->dev);
+
+	return 0;
+
+probe_error_media_entity_cleanup:
+	media_entity_cleanup(&ov2740->sd.entity);
+
+probe_error_v4l2_ctrl_handler_free:
+	v4l2_ctrl_handler_free(ov2740->sd.ctrl_handler);
+	mutex_destroy(&ov2740->mutex);
+
+	return ret;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(ov2740_pm_ops, ov2740_suspend, ov2740_resume);
+
+static const struct acpi_device_id ov2740_acpi_ids[] = {
+	{"INT3474"},
+	{}
+};
+
+MODULE_DEVICE_TABLE(acpi, ov2740_acpi_ids);
+
+static struct i2c_driver ov2740_i2c_driver = {
+	.driver = {
+		.name = "ov2740",
+		.pm = pm_sleep_ptr(&ov2740_pm_ops),
+		.acpi_match_table = ov2740_acpi_ids,
+	},
+	.probe_new = ov2740_probe,
+	.remove = ov2740_remove,
+	.flags = I2C_DRV_ACPI_WAIVE_D0_PROBE,
+};
+
+module_i2c_driver(ov2740_i2c_driver);
+
+MODULE_AUTHOR("Qiu, Tianshu <tian.shu.qiu@intel.com>");
+MODULE_AUTHOR("Shawn Tu <shawnx.tu@intel.com>");
+MODULE_AUTHOR("Bingbu Cao <bingbu.cao@intel.com>");
+MODULE_DESCRIPTION("OmniVision OV2740 sensor driver");
+MODULE_LICENSE("GPL v2");