aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/i2c/s5c73m3/s5c73m3.h
diff options
context:
space:
mode:
authorLibravatar Linus Torvalds <torvalds@linux-foundation.org>2023-02-21 18:24:12 -0800
committerLibravatar Linus Torvalds <torvalds@linux-foundation.org>2023-02-21 18:24:12 -0800
commit5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 (patch)
treecc5c2d0a898769fd59549594fedb3ee6f84e59a0 /drivers/media/i2c/s5c73m3/s5c73m3.h
downloadlinux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.tar.gz
linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.zip
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted
Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ...
Diffstat (limited to 'drivers/media/i2c/s5c73m3/s5c73m3.h')
-rw-r--r--drivers/media/i2c/s5c73m3/s5c73m3.h451
1 files changed, 451 insertions, 0 deletions
diff --git a/drivers/media/i2c/s5c73m3/s5c73m3.h b/drivers/media/i2c/s5c73m3/s5c73m3.h
new file mode 100644
index 000000000..1fc7df41c
--- /dev/null
+++ b/drivers/media/i2c/s5c73m3/s5c73m3.h
@@ -0,0 +1,451 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Samsung LSI S5C73M3 8M pixel camera driver
+ *
+ * Copyright (C) 2012, Samsung Electronics, Co., Ltd.
+ * Sylwester Nawrocki <s.nawrocki@samsung.com>
+ * Andrzej Hajda <a.hajda@samsung.com>
+ */
+#ifndef S5C73M3_H_
+#define S5C73M3_H_
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/regulator/consumer.h>
+#include <linux/gpio/consumer.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-subdev.h>
+#include <media/i2c/s5c73m3.h>
+
+#define DRIVER_NAME "S5C73M3"
+
+#define S5C73M3_ISP_FMT MEDIA_BUS_FMT_VYUY8_2X8
+#define S5C73M3_JPEG_FMT MEDIA_BUS_FMT_S5C_UYVY_JPEG_1X8
+
+/* Subdevs pad index definitions */
+enum s5c73m3_pads {
+ S5C73M3_ISP_PAD,
+ S5C73M3_JPEG_PAD,
+ S5C73M3_NUM_PADS
+};
+
+enum s5c73m3_oif_pads {
+ OIF_ISP_PAD,
+ OIF_JPEG_PAD,
+ OIF_SOURCE_PAD,
+ OIF_NUM_PADS
+};
+
+#define S5C73M3_SENSOR_FW_LEN 6
+#define S5C73M3_SENSOR_TYPE_LEN 12
+
+#define S5C73M3_REG(_addrh, _addrl) (((_addrh) << 16) | _addrl)
+
+#define AHB_MSB_ADDR_PTR 0xfcfc
+#define REG_CMDWR_ADDRH 0x0050
+#define REG_CMDWR_ADDRL 0x0054
+#define REG_CMDRD_ADDRH 0x0058
+#define REG_CMDRD_ADDRL 0x005c
+#define REG_CMDBUF_ADDR 0x0f14
+
+#define REG_I2C_SEQ_STATUS S5C73M3_REG(0x0009, 0x59A6)
+#define SEQ_END_PLL (1<<0x0)
+#define SEQ_END_SENSOR (1<<0x1)
+#define SEQ_END_GPIO (1<<0x2)
+#define SEQ_END_FROM (1<<0x3)
+#define SEQ_END_STABLE_AE_AWB (1<<0x4)
+#define SEQ_END_READY_I2C_CMD (1<<0x5)
+
+#define REG_I2C_STATUS S5C73M3_REG(0x0009, 0x599E)
+#define I2C_STATUS_CIS_I2C (1<<0x0)
+#define I2C_STATUS_AF_INIT (1<<0x1)
+#define I2C_STATUS_CAL_DATA (1<<0x2)
+#define I2C_STATUS_FRAME_COUNT (1<<0x3)
+#define I2C_STATUS_FROM_INIT (1<<0x4)
+#define I2C_STATUS_I2C_CIS_STREAM_OFF (1<<0x5)
+#define I2C_STATUS_I2C_N_CMD_OVER (1<<0x6)
+#define I2C_STATUS_I2C_N_CMD_MISMATCH (1<<0x7)
+#define I2C_STATUS_CHECK_BIN_CRC (1<<0x8)
+#define I2C_STATUS_EXCEPTION (1<<0x9)
+#define I2C_STATUS_INIF_INIT_STATE (0x8)
+
+#define REG_STATUS S5C73M3_REG(0x0009, 0x5080)
+#define REG_STATUS_BOOT_SUB_MAIN_ENTER 0xff01
+#define REG_STATUS_BOOT_SRAM_TIMING_OK 0xff02
+#define REG_STATUS_BOOT_INTERRUPTS_EN 0xff03
+#define REG_STATUS_BOOT_R_PLL_DONE 0xff04
+#define REG_STATUS_BOOT_R_PLL_LOCKTIME_DONE 0xff05
+#define REG_STATUS_BOOT_DELAY_COUNT_DONE 0xff06
+#define REG_STATUS_BOOT_I_PLL_DONE 0xff07
+#define REG_STATUS_BOOT_I_PLL_LOCKTIME_DONE 0xff08
+#define REG_STATUS_BOOT_PLL_INIT_OK 0xff09
+#define REG_STATUS_BOOT_SENSOR_INIT_OK 0xff0a
+#define REG_STATUS_BOOT_GPIO_SETTING_OK 0xff0b
+#define REG_STATUS_BOOT_READ_CAL_DATA_OK 0xff0c
+#define REG_STATUS_BOOT_STABLE_AE_AWB_OK 0xff0d
+#define REG_STATUS_ISP_COMMAND_COMPLETED 0xffff
+#define REG_STATUS_EXCEPTION_OCCURED 0xdead
+
+#define COMM_RESULT_OFFSET S5C73M3_REG(0x0009, 0x5000)
+
+#define COMM_IMG_OUTPUT 0x0902
+#define COMM_IMG_OUTPUT_HDR 0x0008
+#define COMM_IMG_OUTPUT_YUV 0x0009
+#define COMM_IMG_OUTPUT_INTERLEAVED 0x000d
+
+#define COMM_STILL_PRE_FLASH 0x0a00
+#define COMM_STILL_PRE_FLASH_FIRE 0x0000
+#define COMM_STILL_PRE_FLASH_NON_FIRED 0x0000
+#define COMM_STILL_PRE_FLASH_FIRED 0x0001
+
+#define COMM_STILL_MAIN_FLASH 0x0a02
+#define COMM_STILL_MAIN_FLASH_CANCEL 0x0001
+#define COMM_STILL_MAIN_FLASH_FIRE 0x0002
+
+#define COMM_ZOOM_STEP 0x0b00
+
+#define COMM_IMAGE_EFFECT 0x0b0a
+#define COMM_IMAGE_EFFECT_NONE 0x0001
+#define COMM_IMAGE_EFFECT_NEGATIVE 0x0002
+#define COMM_IMAGE_EFFECT_AQUA 0x0003
+#define COMM_IMAGE_EFFECT_SEPIA 0x0004
+#define COMM_IMAGE_EFFECT_MONO 0x0005
+
+#define COMM_IMAGE_QUALITY 0x0b0c
+#define COMM_IMAGE_QUALITY_SUPERFINE 0x0000
+#define COMM_IMAGE_QUALITY_FINE 0x0001
+#define COMM_IMAGE_QUALITY_NORMAL 0x0002
+
+#define COMM_FLASH_MODE 0x0b0e
+#define COMM_FLASH_MODE_OFF 0x0000
+#define COMM_FLASH_MODE_ON 0x0001
+#define COMM_FLASH_MODE_AUTO 0x0002
+
+#define COMM_FLASH_STATUS 0x0b80
+#define COMM_FLASH_STATUS_OFF 0x0001
+#define COMM_FLASH_STATUS_ON 0x0002
+#define COMM_FLASH_STATUS_AUTO 0x0003
+
+#define COMM_FLASH_TORCH 0x0b12
+#define COMM_FLASH_TORCH_OFF 0x0000
+#define COMM_FLASH_TORCH_ON 0x0001
+
+#define COMM_AE_NEEDS_FLASH 0x0cba
+#define COMM_AE_NEEDS_FLASH_OFF 0x0000
+#define COMM_AE_NEEDS_FLASH_ON 0x0001
+
+#define COMM_CHG_MODE 0x0b10
+#define COMM_CHG_MODE_NEW 0x8000
+#define COMM_CHG_MODE_SUBSAMPLING_HALF 0x2000
+#define COMM_CHG_MODE_SUBSAMPLING_QUARTER 0x4000
+
+#define COMM_CHG_MODE_YUV_320_240 0x0001
+#define COMM_CHG_MODE_YUV_640_480 0x0002
+#define COMM_CHG_MODE_YUV_880_720 0x0003
+#define COMM_CHG_MODE_YUV_960_720 0x0004
+#define COMM_CHG_MODE_YUV_1184_666 0x0005
+#define COMM_CHG_MODE_YUV_1280_720 0x0006
+#define COMM_CHG_MODE_YUV_1536_864 0x0007
+#define COMM_CHG_MODE_YUV_1600_1200 0x0008
+#define COMM_CHG_MODE_YUV_1632_1224 0x0009
+#define COMM_CHG_MODE_YUV_1920_1080 0x000a
+#define COMM_CHG_MODE_YUV_1920_1440 0x000b
+#define COMM_CHG_MODE_YUV_2304_1296 0x000c
+#define COMM_CHG_MODE_YUV_3264_2448 0x000d
+#define COMM_CHG_MODE_YUV_352_288 0x000e
+#define COMM_CHG_MODE_YUV_1008_672 0x000f
+
+#define COMM_CHG_MODE_JPEG_640_480 0x0010
+#define COMM_CHG_MODE_JPEG_800_450 0x0020
+#define COMM_CHG_MODE_JPEG_800_600 0x0030
+#define COMM_CHG_MODE_JPEG_1280_720 0x0040
+#define COMM_CHG_MODE_JPEG_1280_960 0x0050
+#define COMM_CHG_MODE_JPEG_1600_900 0x0060
+#define COMM_CHG_MODE_JPEG_1600_1200 0x0070
+#define COMM_CHG_MODE_JPEG_2048_1152 0x0080
+#define COMM_CHG_MODE_JPEG_2048_1536 0x0090
+#define COMM_CHG_MODE_JPEG_2560_1440 0x00a0
+#define COMM_CHG_MODE_JPEG_2560_1920 0x00b0
+#define COMM_CHG_MODE_JPEG_3264_2176 0x00c0
+#define COMM_CHG_MODE_JPEG_1024_768 0x00d0
+#define COMM_CHG_MODE_JPEG_3264_1836 0x00e0
+#define COMM_CHG_MODE_JPEG_3264_2448 0x00f0
+
+#define COMM_AF_CON 0x0e00
+#define COMM_AF_CON_STOP 0x0000
+#define COMM_AF_CON_SCAN 0x0001 /* Full Search */
+#define COMM_AF_CON_START 0x0002 /* Fast Search */
+
+#define COMM_AF_CAL 0x0e06
+#define COMM_AF_TOUCH_AF 0x0e0a
+
+#define REG_AF_STATUS S5C73M3_REG(0x0009, 0x5e80)
+#define REG_CAF_STATUS_FIND_SEARCH_DIR 0x0001
+#define REG_CAF_STATUS_FOCUSING 0x0002
+#define REG_CAF_STATUS_FOCUSED 0x0003
+#define REG_CAF_STATUS_UNFOCUSED 0x0004
+#define REG_AF_STATUS_INVALID 0x0010
+#define REG_AF_STATUS_FOCUSING 0x0020
+#define REG_AF_STATUS_FOCUSED 0x0030
+#define REG_AF_STATUS_UNFOCUSED 0x0040
+
+#define REG_AF_TOUCH_POSITION S5C73M3_REG(0x0009, 0x5e8e)
+#define COMM_AF_FACE_ZOOM 0x0e10
+
+#define COMM_AF_MODE 0x0e02
+#define COMM_AF_MODE_NORMAL 0x0000
+#define COMM_AF_MODE_MACRO 0x0001
+#define COMM_AF_MODE_MOVIE_CAF_START 0x0002
+#define COMM_AF_MODE_MOVIE_CAF_STOP 0x0003
+#define COMM_AF_MODE_PREVIEW_CAF_START 0x0004
+#define COMM_AF_MODE_PREVIEW_CAF_STOP 0x0005
+
+#define COMM_AF_SOFTLANDING 0x0e16
+#define COMM_AF_SOFTLANDING_ON 0x0000
+#define COMM_AF_SOFTLANDING_RES_COMPLETE 0x0001
+
+#define COMM_FACE_DET 0x0e0c
+#define COMM_FACE_DET_OFF 0x0000
+#define COMM_FACE_DET_ON 0x0001
+
+#define COMM_FACE_DET_OSD 0x0e0e
+#define COMM_FACE_DET_OSD_OFF 0x0000
+#define COMM_FACE_DET_OSD_ON 0x0001
+
+#define COMM_AE_CON 0x0c00
+#define COMM_AE_STOP 0x0000 /* lock */
+#define COMM_AE_START 0x0001 /* unlock */
+
+#define COMM_ISO 0x0c02
+#define COMM_ISO_AUTO 0x0000
+#define COMM_ISO_100 0x0001
+#define COMM_ISO_200 0x0002
+#define COMM_ISO_400 0x0003
+#define COMM_ISO_800 0x0004
+#define COMM_ISO_SPORTS 0x0005
+#define COMM_ISO_NIGHT 0x0006
+#define COMM_ISO_INDOOR 0x0007
+
+/* 0x00000 (-2.0 EV)...0x0008 (2.0 EV), 0.5EV step */
+#define COMM_EV 0x0c04
+
+#define COMM_METERING 0x0c06
+#define COMM_METERING_CENTER 0x0000
+#define COMM_METERING_SPOT 0x0001
+#define COMM_METERING_AVERAGE 0x0002
+#define COMM_METERING_SMART 0x0003
+
+#define COMM_WDR 0x0c08
+#define COMM_WDR_OFF 0x0000
+#define COMM_WDR_ON 0x0001
+
+#define COMM_FLICKER_MODE 0x0c12
+#define COMM_FLICKER_NONE 0x0000
+#define COMM_FLICKER_MANUAL_50HZ 0x0001
+#define COMM_FLICKER_MANUAL_60HZ 0x0002
+#define COMM_FLICKER_AUTO 0x0003
+#define COMM_FLICKER_AUTO_50HZ 0x0004
+#define COMM_FLICKER_AUTO_60HZ 0x0005
+
+#define COMM_FRAME_RATE 0x0c1e
+#define COMM_FRAME_RATE_AUTO_SET 0x0000
+#define COMM_FRAME_RATE_FIXED_30FPS 0x0002
+#define COMM_FRAME_RATE_FIXED_20FPS 0x0003
+#define COMM_FRAME_RATE_FIXED_15FPS 0x0004
+#define COMM_FRAME_RATE_FIXED_60FPS 0x0007
+#define COMM_FRAME_RATE_FIXED_120FPS 0x0008
+#define COMM_FRAME_RATE_FIXED_7FPS 0x0009
+#define COMM_FRAME_RATE_FIXED_10FPS 0x000a
+#define COMM_FRAME_RATE_FIXED_90FPS 0x000b
+#define COMM_FRAME_RATE_ANTI_SHAKE 0x0013
+
+/* 0x0000...0x0004 -> sharpness: 0, 1, 2, -1, -2 */
+#define COMM_SHARPNESS 0x0c14
+
+/* 0x0000...0x0004 -> saturation: 0, 1, 2, -1, -2 */
+#define COMM_SATURATION 0x0c16
+
+/* 0x0000...0x0004 -> contrast: 0, 1, 2, -1, -2 */
+#define COMM_CONTRAST 0x0c18
+
+#define COMM_SCENE_MODE 0x0c1a
+#define COMM_SCENE_MODE_NONE 0x0000
+#define COMM_SCENE_MODE_PORTRAIT 0x0001
+#define COMM_SCENE_MODE_LANDSCAPE 0x0002
+#define COMM_SCENE_MODE_SPORTS 0x0003
+#define COMM_SCENE_MODE_INDOOR 0x0004
+#define COMM_SCENE_MODE_BEACH 0x0005
+#define COMM_SCENE_MODE_SUNSET 0x0006
+#define COMM_SCENE_MODE_DAWN 0x0007
+#define COMM_SCENE_MODE_FALL 0x0008
+#define COMM_SCENE_MODE_NIGHT 0x0009
+#define COMM_SCENE_MODE_AGAINST_LIGHT 0x000a
+#define COMM_SCENE_MODE_FIRE 0x000b
+#define COMM_SCENE_MODE_TEXT 0x000c
+#define COMM_SCENE_MODE_CANDLE 0x000d
+
+#define COMM_AE_AUTO_BRACKET 0x0b14
+#define COMM_AE_AUTO_BRAKET_EV05 0x0080
+#define COMM_AE_AUTO_BRAKET_EV10 0x0100
+#define COMM_AE_AUTO_BRAKET_EV15 0x0180
+#define COMM_AE_AUTO_BRAKET_EV20 0x0200
+
+#define COMM_SENSOR_STREAMING 0x090a
+#define COMM_SENSOR_STREAMING_OFF 0x0000
+#define COMM_SENSOR_STREAMING_ON 0x0001
+
+#define COMM_AWB_MODE 0x0d02
+#define COMM_AWB_MODE_INCANDESCENT 0x0000
+#define COMM_AWB_MODE_FLUORESCENT1 0x0001
+#define COMM_AWB_MODE_FLUORESCENT2 0x0002
+#define COMM_AWB_MODE_DAYLIGHT 0x0003
+#define COMM_AWB_MODE_CLOUDY 0x0004
+#define COMM_AWB_MODE_AUTO 0x0005
+
+#define COMM_AWB_CON 0x0d00
+#define COMM_AWB_STOP 0x0000 /* lock */
+#define COMM_AWB_START 0x0001 /* unlock */
+
+#define COMM_FW_UPDATE 0x0906
+#define COMM_FW_UPDATE_NOT_READY 0x0000
+#define COMM_FW_UPDATE_SUCCESS 0x0005
+#define COMM_FW_UPDATE_FAIL 0x0007
+#define COMM_FW_UPDATE_BUSY 0xffff
+
+
+#define S5C73M3_MAX_SUPPLIES 6
+#define S5C73M3_DEFAULT_MCLK_FREQ 24000000U
+
+struct s5c73m3_ctrls {
+ struct v4l2_ctrl_handler handler;
+ struct {
+ /* exposure/exposure bias cluster */
+ struct v4l2_ctrl *auto_exposure;
+ struct v4l2_ctrl *exposure_bias;
+ struct v4l2_ctrl *exposure_metering;
+ };
+ struct {
+ /* iso/auto iso cluster */
+ struct v4l2_ctrl *auto_iso;
+ struct v4l2_ctrl *iso;
+ };
+ struct v4l2_ctrl *auto_wb;
+ struct {
+ /* continuous auto focus/auto focus cluster */
+ struct v4l2_ctrl *focus_auto;
+ struct v4l2_ctrl *af_start;
+ struct v4l2_ctrl *af_stop;
+ struct v4l2_ctrl *af_status;
+ struct v4l2_ctrl *af_distance;
+ };
+
+ struct v4l2_ctrl *aaa_lock;
+ struct v4l2_ctrl *colorfx;
+ struct v4l2_ctrl *contrast;
+ struct v4l2_ctrl *saturation;
+ struct v4l2_ctrl *sharpness;
+ struct v4l2_ctrl *zoom;
+ struct v4l2_ctrl *wdr;
+ struct v4l2_ctrl *stabilization;
+ struct v4l2_ctrl *jpeg_quality;
+ struct v4l2_ctrl *scene_mode;
+};
+
+enum s5c73m3_resolution_types {
+ RES_ISP,
+ RES_JPEG,
+};
+
+struct s5c73m3_interval {
+ u16 fps_reg;
+ struct v4l2_fract interval;
+ /* Maximum rectangle for the interval */
+ struct v4l2_frmsize_discrete size;
+};
+
+struct s5c73m3 {
+ struct v4l2_subdev sensor_sd;
+ struct media_pad sensor_pads[S5C73M3_NUM_PADS];
+
+ struct v4l2_subdev oif_sd;
+ struct media_pad oif_pads[OIF_NUM_PADS];
+
+ struct spi_driver spidrv;
+ struct spi_device *spi_dev;
+ struct i2c_client *i2c_client;
+ u32 i2c_write_address;
+ u32 i2c_read_address;
+
+ struct regulator_bulk_data supplies[S5C73M3_MAX_SUPPLIES];
+ struct gpio_desc *stby;
+ struct gpio_desc *reset;
+
+ struct clk *clock;
+
+ /* External master clock frequency */
+ u32 mclk_frequency;
+ /* Video bus type - MIPI-CSI2/parallel */
+ enum v4l2_mbus_type bus_type;
+
+ const struct s5c73m3_frame_size *sensor_pix_size[2];
+ const struct s5c73m3_frame_size *oif_pix_size[2];
+ u32 mbus_code;
+
+ const struct s5c73m3_interval *fiv;
+
+ struct v4l2_mbus_frame_desc frame_desc;
+ /* protects the struct members below */
+ struct mutex lock;
+
+ struct s5c73m3_ctrls ctrls;
+
+ u8 streaming:1;
+ u8 apply_fmt:1;
+ u8 apply_fiv:1;
+ u8 isp_ready:1;
+
+ short power;
+
+ char sensor_fw[S5C73M3_SENSOR_FW_LEN + 2];
+ char sensor_type[S5C73M3_SENSOR_TYPE_LEN + 2];
+ char fw_file_version[2];
+ unsigned int fw_size;
+};
+
+struct s5c73m3_frame_size {
+ u32 width;
+ u32 height;
+ u8 reg_val;
+};
+
+extern int s5c73m3_dbg;
+
+int s5c73m3_register_spi_driver(struct s5c73m3 *state);
+void s5c73m3_unregister_spi_driver(struct s5c73m3 *state);
+int s5c73m3_spi_write(struct s5c73m3 *state, const void *addr,
+ const unsigned int len, const unsigned int tx_size);
+int s5c73m3_spi_read(struct s5c73m3 *state, void *addr,
+ const unsigned int len, const unsigned int tx_size);
+
+int s5c73m3_read(struct s5c73m3 *state, u32 addr, u16 *data);
+int s5c73m3_write(struct s5c73m3 *state, u32 addr, u16 data);
+int s5c73m3_isp_command(struct s5c73m3 *state, u16 command, u16 data);
+int s5c73m3_init_controls(struct s5c73m3 *state);
+
+static inline struct v4l2_subdev *ctrl_to_sensor_sd(struct v4l2_ctrl *ctrl)
+{
+ return &container_of(ctrl->handler, struct s5c73m3,
+ ctrls.handler)->sensor_sd;
+}
+
+static inline struct s5c73m3 *sensor_sd_to_s5c73m3(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct s5c73m3, sensor_sd);
+}
+
+static inline struct s5c73m3 *oif_sd_to_s5c73m3(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct s5c73m3, oif_sd);
+}
+#endif /* S5C73M3_H_ */