Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 818 insertions, 0 deletions

diff --git a/drivers/media/i2c/saa7127.c b/drivers/media/i2c/saa7127.c
new file mode 100644
index 000000000..78c9388c2
--- /dev/null
+++ b/drivers/media/i2c/saa7127.c
@@ -0,0 +1,818 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * saa7127 - Philips SAA7127/SAA7129 video encoder driver
+ *
+ * Copyright (C) 2003 Roy Bulter <rbulter@hetnet.nl>
+ *
+ * Based on SAA7126 video encoder driver by Gillem & Andreas Oberritter
+ *
+ * Copyright (C) 2000-2001 Gillem <htoa@gmx.net>
+ * Copyright (C) 2002 Andreas Oberritter <obi@saftware.de>
+ *
+ * Based on Stadis 4:2:2 MPEG-2 Decoder Driver by Nathan Laredo
+ *
+ * Copyright (C) 1999 Nathan Laredo <laredo@gnu.org>
+ *
+ * This driver is designed for the Hauppauge 250/350 Linux driver
+ * from the ivtv Project
+ *
+ * Copyright (C) 2003 Kevin Thayer <nufan_wfk@yahoo.com>
+ *
+ * Dual output support:
+ * Copyright (C) 2004 Eric Varsanyi
+ *
+ * NTSC Tuning and 7.5 IRE Setup
+ * Copyright (C) 2004  Chris Kennedy <c@groovy.org>
+ *
+ * VBI additions & cleanup:
+ * Copyright (C) 2004, 2005 Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ * Note: the saa7126 is identical to the saa7127, and the saa7128 is
+ * identical to the saa7129, except that the saa7126 and saa7128 have
+ * macrovision anti-taping support. This driver will almost certainly
+ * work fine for those chips, except of course for the missing anti-taping
+ * support.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/i2c/saa7127.h>
+
+static int debug;
+static int test_image;
+
+MODULE_DESCRIPTION("Philips SAA7127/9 video encoder driver");
+MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil");
+MODULE_LICENSE("GPL");
+module_param(debug, int, 0644);
+module_param(test_image, int, 0644);
+MODULE_PARM_DESC(debug, "debug level (0-2)");
+MODULE_PARM_DESC(test_image, "test_image (0-1)");
+
+
+/*
+ * SAA7127 registers
+ */
+
+#define SAA7127_REG_STATUS                           0x00
+#define SAA7127_REG_WIDESCREEN_CONFIG                0x26
+#define SAA7127_REG_WIDESCREEN_ENABLE                0x27
+#define SAA7127_REG_BURST_START                      0x28
+#define SAA7127_REG_BURST_END                        0x29
+#define SAA7127_REG_COPYGEN_0                        0x2a
+#define SAA7127_REG_COPYGEN_1                        0x2b
+#define SAA7127_REG_COPYGEN_2                        0x2c
+#define SAA7127_REG_OUTPUT_PORT_CONTROL              0x2d
+#define SAA7127_REG_GAIN_LUMINANCE_RGB               0x38
+#define SAA7127_REG_GAIN_COLORDIFF_RGB               0x39
+#define SAA7127_REG_INPUT_PORT_CONTROL_1             0x3a
+#define SAA7129_REG_FADE_KEY_COL2		     0x4f
+#define SAA7127_REG_CHROMA_PHASE                     0x5a
+#define SAA7127_REG_GAINU                            0x5b
+#define SAA7127_REG_GAINV                            0x5c
+#define SAA7127_REG_BLACK_LEVEL                      0x5d
+#define SAA7127_REG_BLANKING_LEVEL                   0x5e
+#define SAA7127_REG_VBI_BLANKING                     0x5f
+#define SAA7127_REG_DAC_CONTROL                      0x61
+#define SAA7127_REG_BURST_AMP                        0x62
+#define SAA7127_REG_SUBC3                            0x63
+#define SAA7127_REG_SUBC2                            0x64
+#define SAA7127_REG_SUBC1                            0x65
+#define SAA7127_REG_SUBC0                            0x66
+#define SAA7127_REG_LINE_21_ODD_0                    0x67
+#define SAA7127_REG_LINE_21_ODD_1                    0x68
+#define SAA7127_REG_LINE_21_EVEN_0                   0x69
+#define SAA7127_REG_LINE_21_EVEN_1                   0x6a
+#define SAA7127_REG_RCV_PORT_CONTROL                 0x6b
+#define SAA7127_REG_VTRIG                            0x6c
+#define SAA7127_REG_HTRIG_HI                         0x6d
+#define SAA7127_REG_MULTI                            0x6e
+#define SAA7127_REG_CLOSED_CAPTION                   0x6f
+#define SAA7127_REG_RCV2_OUTPUT_START                0x70
+#define SAA7127_REG_RCV2_OUTPUT_END                  0x71
+#define SAA7127_REG_RCV2_OUTPUT_MSBS                 0x72
+#define SAA7127_REG_TTX_REQUEST_H_START              0x73
+#define SAA7127_REG_TTX_REQUEST_H_DELAY_LENGTH       0x74
+#define SAA7127_REG_CSYNC_ADVANCE_VSYNC_SHIFT        0x75
+#define SAA7127_REG_TTX_ODD_REQ_VERT_START           0x76
+#define SAA7127_REG_TTX_ODD_REQ_VERT_END             0x77
+#define SAA7127_REG_TTX_EVEN_REQ_VERT_START          0x78
+#define SAA7127_REG_TTX_EVEN_REQ_VERT_END            0x79
+#define SAA7127_REG_FIRST_ACTIVE                     0x7a
+#define SAA7127_REG_LAST_ACTIVE                      0x7b
+#define SAA7127_REG_MSB_VERTICAL                     0x7c
+#define SAA7127_REG_DISABLE_TTX_LINE_LO_0            0x7e
+#define SAA7127_REG_DISABLE_TTX_LINE_LO_1            0x7f
+
+/*
+ **********************************************************************
+ *
+ *  Arrays with configuration parameters for the SAA7127
+ *
+ **********************************************************************
+ */
+
+struct i2c_reg_value {
+	unsigned char reg;
+	unsigned char value;
+};
+
+static const struct i2c_reg_value saa7129_init_config_extra[] = {
+	{ SAA7127_REG_OUTPUT_PORT_CONTROL,		0x38 },
+	{ SAA7127_REG_VTRIG,				0xfa },
+	{ 0, 0 }
+};
+
+static const struct i2c_reg_value saa7127_init_config_common[] = {
+	{ SAA7127_REG_WIDESCREEN_CONFIG,		0x0d },
+	{ SAA7127_REG_WIDESCREEN_ENABLE,		0x00 },
+	{ SAA7127_REG_COPYGEN_0,			0x77 },
+	{ SAA7127_REG_COPYGEN_1,			0x41 },
+	{ SAA7127_REG_COPYGEN_2,			0x00 },	/* Macrovision enable/disable */
+	{ SAA7127_REG_OUTPUT_PORT_CONTROL,		0xbf },
+	{ SAA7127_REG_GAIN_LUMINANCE_RGB,		0x00 },
+	{ SAA7127_REG_GAIN_COLORDIFF_RGB,		0x00 },
+	{ SAA7127_REG_INPUT_PORT_CONTROL_1,		0x80 },	/* for color bars */
+	{ SAA7127_REG_LINE_21_ODD_0,			0x77 },
+	{ SAA7127_REG_LINE_21_ODD_1,			0x41 },
+	{ SAA7127_REG_LINE_21_EVEN_0,			0x88 },
+	{ SAA7127_REG_LINE_21_EVEN_1,			0x41 },
+	{ SAA7127_REG_RCV_PORT_CONTROL,			0x12 },
+	{ SAA7127_REG_VTRIG,				0xf9 },
+	{ SAA7127_REG_HTRIG_HI,				0x00 },
+	{ SAA7127_REG_RCV2_OUTPUT_START,		0x41 },
+	{ SAA7127_REG_RCV2_OUTPUT_END,			0xc3 },
+	{ SAA7127_REG_RCV2_OUTPUT_MSBS,			0x00 },
+	{ SAA7127_REG_TTX_REQUEST_H_START,		0x3e },
+	{ SAA7127_REG_TTX_REQUEST_H_DELAY_LENGTH,	0xb8 },
+	{ SAA7127_REG_CSYNC_ADVANCE_VSYNC_SHIFT,	0x03 },
+	{ SAA7127_REG_TTX_ODD_REQ_VERT_START,		0x15 },
+	{ SAA7127_REG_TTX_ODD_REQ_VERT_END,		0x16 },
+	{ SAA7127_REG_TTX_EVEN_REQ_VERT_START,		0x15 },
+	{ SAA7127_REG_TTX_EVEN_REQ_VERT_END,		0x16 },
+	{ SAA7127_REG_FIRST_ACTIVE,			0x1a },
+	{ SAA7127_REG_LAST_ACTIVE,			0x01 },
+	{ SAA7127_REG_MSB_VERTICAL,			0xc0 },
+	{ SAA7127_REG_DISABLE_TTX_LINE_LO_0,		0x00 },
+	{ SAA7127_REG_DISABLE_TTX_LINE_LO_1,		0x00 },
+	{ 0, 0 }
+};
+
+#define SAA7127_60HZ_DAC_CONTROL 0x15
+static const struct i2c_reg_value saa7127_init_config_60hz[] = {
+	{ SAA7127_REG_BURST_START,			0x19 },
+	/* BURST_END is also used as a chip ID in saa7127_probe */
+	{ SAA7127_REG_BURST_END,			0x1d },
+	{ SAA7127_REG_CHROMA_PHASE,			0xa3 },
+	{ SAA7127_REG_GAINU,				0x98 },
+	{ SAA7127_REG_GAINV,				0xd3 },
+	{ SAA7127_REG_BLACK_LEVEL,			0x39 },
+	{ SAA7127_REG_BLANKING_LEVEL,			0x2e },
+	{ SAA7127_REG_VBI_BLANKING,			0x2e },
+	{ SAA7127_REG_DAC_CONTROL,			0x15 },
+	{ SAA7127_REG_BURST_AMP,			0x4d },
+	{ SAA7127_REG_SUBC3,				0x1f },
+	{ SAA7127_REG_SUBC2,				0x7c },
+	{ SAA7127_REG_SUBC1,				0xf0 },
+	{ SAA7127_REG_SUBC0,				0x21 },
+	{ SAA7127_REG_MULTI,				0x90 },
+	{ SAA7127_REG_CLOSED_CAPTION,			0x11 },
+	{ 0, 0 }
+};
+
+#define SAA7127_50HZ_PAL_DAC_CONTROL 0x02
+static struct i2c_reg_value saa7127_init_config_50hz_pal[] = {
+	{ SAA7127_REG_BURST_START,			0x21 },
+	/* BURST_END is also used as a chip ID in saa7127_probe */
+	{ SAA7127_REG_BURST_END,			0x1d },
+	{ SAA7127_REG_CHROMA_PHASE,			0x3f },
+	{ SAA7127_REG_GAINU,				0x7d },
+	{ SAA7127_REG_GAINV,				0xaf },
+	{ SAA7127_REG_BLACK_LEVEL,			0x33 },
+	{ SAA7127_REG_BLANKING_LEVEL,			0x35 },
+	{ SAA7127_REG_VBI_BLANKING,			0x35 },
+	{ SAA7127_REG_DAC_CONTROL,			0x02 },
+	{ SAA7127_REG_BURST_AMP,			0x2f },
+	{ SAA7127_REG_SUBC3,				0xcb },
+	{ SAA7127_REG_SUBC2,				0x8a },
+	{ SAA7127_REG_SUBC1,				0x09 },
+	{ SAA7127_REG_SUBC0,				0x2a },
+	{ SAA7127_REG_MULTI,				0xa0 },
+	{ SAA7127_REG_CLOSED_CAPTION,			0x00 },
+	{ 0, 0 }
+};
+
+#define SAA7127_50HZ_SECAM_DAC_CONTROL 0x08
+static struct i2c_reg_value saa7127_init_config_50hz_secam[] = {
+	{ SAA7127_REG_BURST_START,			0x21 },
+	/* BURST_END is also used as a chip ID in saa7127_probe */
+	{ SAA7127_REG_BURST_END,			0x1d },
+	{ SAA7127_REG_CHROMA_PHASE,			0x3f },
+	{ SAA7127_REG_GAINU,				0x6a },
+	{ SAA7127_REG_GAINV,				0x81 },
+	{ SAA7127_REG_BLACK_LEVEL,			0x33 },
+	{ SAA7127_REG_BLANKING_LEVEL,			0x35 },
+	{ SAA7127_REG_VBI_BLANKING,			0x35 },
+	{ SAA7127_REG_DAC_CONTROL,			0x08 },
+	{ SAA7127_REG_BURST_AMP,			0x2f },
+	{ SAA7127_REG_SUBC3,				0xb2 },
+	{ SAA7127_REG_SUBC2,				0x3b },
+	{ SAA7127_REG_SUBC1,				0xa3 },
+	{ SAA7127_REG_SUBC0,				0x28 },
+	{ SAA7127_REG_MULTI,				0x90 },
+	{ SAA7127_REG_CLOSED_CAPTION,			0x00 },
+	{ 0, 0 }
+};
+
+/*
+ **********************************************************************
+ *
+ *  Encoder Struct, holds the configuration state of the encoder
+ *
+ **********************************************************************
+ */
+
+enum saa712x_model {
+	SAA7127,
+	SAA7129,
+};
+
+struct saa7127_state {
+	struct v4l2_subdev sd;
+	v4l2_std_id std;
+	enum saa712x_model ident;
+	enum saa7127_input_type input_type;
+	enum saa7127_output_type output_type;
+	int video_enable;
+	int wss_enable;
+	u16 wss_mode;
+	int cc_enable;
+	u16 cc_data;
+	int xds_enable;
+	u16 xds_data;
+	int vps_enable;
+	u8 vps_data[5];
+	u8 reg_2d;
+	u8 reg_3a;
+	u8 reg_3a_cb;   /* colorbar bit */
+	u8 reg_61;
+};
+
+static inline struct saa7127_state *to_state(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct saa7127_state, sd);
+}
+
+static const char * const output_strs[] =
+{
+	"S-Video + Composite",
+	"Composite",
+	"S-Video",
+	"RGB",
+	"YUV C",
+	"YUV V"
+};
+
+static const char * const wss_strs[] = {
+	"invalid",
+	"letterbox 14:9 center",
+	"letterbox 14:9 top",
+	"invalid",
+	"letterbox 16:9 top",
+	"invalid",
+	"invalid",
+	"16:9 full format anamorphic",
+	"4:3 full format",
+	"invalid",
+	"invalid",
+	"letterbox 16:9 center",
+	"invalid",
+	"letterbox >16:9 center",
+	"14:9 full format center",
+	"invalid",
+};
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_read(struct v4l2_subdev *sd, u8 reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_write(struct v4l2_subdev *sd, u8 reg, u8 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	int i;
+
+	for (i = 0; i < 3; i++) {
+		if (i2c_smbus_write_byte_data(client, reg, val) == 0)
+			return 0;
+	}
+	v4l2_err(sd, "I2C Write Problem\n");
+	return -1;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_write_inittab(struct v4l2_subdev *sd,
+				 const struct i2c_reg_value *regs)
+{
+	while (regs->reg != 0) {
+		saa7127_write(sd, regs->reg, regs->value);
+		regs++;
+	}
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_set_vps(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data)
+{
+	struct saa7127_state *state = to_state(sd);
+	int enable = (data->line != 0);
+
+	if (enable && (data->field != 0 || data->line != 16))
+		return -EINVAL;
+	if (state->vps_enable != enable) {
+		v4l2_dbg(1, debug, sd, "Turn VPS Signal %s\n", enable ? "on" : "off");
+		saa7127_write(sd, 0x54, enable << 7);
+		state->vps_enable = enable;
+	}
+	if (!enable)
+		return 0;
+
+	state->vps_data[0] = data->data[2];
+	state->vps_data[1] = data->data[8];
+	state->vps_data[2] = data->data[9];
+	state->vps_data[3] = data->data[10];
+	state->vps_data[4] = data->data[11];
+	v4l2_dbg(1, debug, sd, "Set VPS data %*ph\n", 5, state->vps_data);
+	saa7127_write(sd, 0x55, state->vps_data[0]);
+	saa7127_write(sd, 0x56, state->vps_data[1]);
+	saa7127_write(sd, 0x57, state->vps_data[2]);
+	saa7127_write(sd, 0x58, state->vps_data[3]);
+	saa7127_write(sd, 0x59, state->vps_data[4]);
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_set_cc(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data)
+{
+	struct saa7127_state *state = to_state(sd);
+	u16 cc = data->data[1] << 8 | data->data[0];
+	int enable = (data->line != 0);
+
+	if (enable && (data->field != 0 || data->line != 21))
+		return -EINVAL;
+	if (state->cc_enable != enable) {
+		v4l2_dbg(1, debug, sd,
+			"Turn CC %s\n", enable ? "on" : "off");
+		saa7127_write(sd, SAA7127_REG_CLOSED_CAPTION,
+			(state->xds_enable << 7) | (enable << 6) | 0x11);
+		state->cc_enable = enable;
+	}
+	if (!enable)
+		return 0;
+
+	v4l2_dbg(2, debug, sd, "CC data: %04x\n", cc);
+	saa7127_write(sd, SAA7127_REG_LINE_21_ODD_0, cc & 0xff);
+	saa7127_write(sd, SAA7127_REG_LINE_21_ODD_1, cc >> 8);
+	state->cc_data = cc;
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_set_xds(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data)
+{
+	struct saa7127_state *state = to_state(sd);
+	u16 xds = data->data[1] << 8 | data->data[0];
+	int enable = (data->line != 0);
+
+	if (enable && (data->field != 1 || data->line != 21))
+		return -EINVAL;
+	if (state->xds_enable != enable) {
+		v4l2_dbg(1, debug, sd, "Turn XDS %s\n", enable ? "on" : "off");
+		saa7127_write(sd, SAA7127_REG_CLOSED_CAPTION,
+				(enable << 7) | (state->cc_enable << 6) | 0x11);
+		state->xds_enable = enable;
+	}
+	if (!enable)
+		return 0;
+
+	v4l2_dbg(2, debug, sd, "XDS data: %04x\n", xds);
+	saa7127_write(sd, SAA7127_REG_LINE_21_EVEN_0, xds & 0xff);
+	saa7127_write(sd, SAA7127_REG_LINE_21_EVEN_1, xds >> 8);
+	state->xds_data = xds;
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_set_wss(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data)
+{
+	struct saa7127_state *state = to_state(sd);
+	int enable = (data->line != 0);
+
+	if (enable && (data->field != 0 || data->line != 23))
+		return -EINVAL;
+	if (state->wss_enable != enable) {
+		v4l2_dbg(1, debug, sd, "Turn WSS %s\n", enable ? "on" : "off");
+		saa7127_write(sd, 0x27, enable << 7);
+		state->wss_enable = enable;
+	}
+	if (!enable)
+		return 0;
+
+	saa7127_write(sd, 0x26, data->data[0]);
+	saa7127_write(sd, 0x27, 0x80 | (data->data[1] & 0x3f));
+	v4l2_dbg(1, debug, sd,
+		"WSS mode: %s\n", wss_strs[data->data[0] & 0xf]);
+	state->wss_mode = (data->data[1] & 0x3f) << 8 | data->data[0];
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_set_video_enable(struct v4l2_subdev *sd, int enable)
+{
+	struct saa7127_state *state = to_state(sd);
+
+	if (enable) {
+		v4l2_dbg(1, debug, sd, "Enable Video Output\n");
+		saa7127_write(sd, 0x2d, state->reg_2d);
+		saa7127_write(sd, 0x61, state->reg_61);
+	} else {
+		v4l2_dbg(1, debug, sd, "Disable Video Output\n");
+		saa7127_write(sd, 0x2d, (state->reg_2d & 0xf0));
+		saa7127_write(sd, 0x61, (state->reg_61 | 0xc0));
+	}
+	state->video_enable = enable;
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_set_std(struct v4l2_subdev *sd, v4l2_std_id std)
+{
+	struct saa7127_state *state = to_state(sd);
+	const struct i2c_reg_value *inittab;
+
+	if (std & V4L2_STD_525_60) {
+		v4l2_dbg(1, debug, sd, "Selecting 60 Hz video Standard\n");
+		inittab = saa7127_init_config_60hz;
+		state->reg_61 = SAA7127_60HZ_DAC_CONTROL;
+
+	} else if (state->ident == SAA7129 &&
+		   (std & V4L2_STD_SECAM) &&
+		   !(std & (V4L2_STD_625_50 & ~V4L2_STD_SECAM))) {
+
+		/* If and only if SECAM, with a SAA712[89] */
+		v4l2_dbg(1, debug, sd,
+			 "Selecting 50 Hz SECAM video Standard\n");
+		inittab = saa7127_init_config_50hz_secam;
+		state->reg_61 = SAA7127_50HZ_SECAM_DAC_CONTROL;
+
+	} else {
+		v4l2_dbg(1, debug, sd, "Selecting 50 Hz PAL video Standard\n");
+		inittab = saa7127_init_config_50hz_pal;
+		state->reg_61 = SAA7127_50HZ_PAL_DAC_CONTROL;
+	}
+
+	/* Write Table */
+	saa7127_write_inittab(sd, inittab);
+	state->std = std;
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_set_output_type(struct v4l2_subdev *sd, int output)
+{
+	struct saa7127_state *state = to_state(sd);
+
+	switch (output) {
+	case SAA7127_OUTPUT_TYPE_RGB:
+		state->reg_2d = 0x0f;	/* RGB + CVBS (for sync) */
+		state->reg_3a = 0x13;	/* by default switch YUV to RGB-matrix on */
+		break;
+
+	case SAA7127_OUTPUT_TYPE_COMPOSITE:
+		if (state->ident == SAA7129)
+			state->reg_2d = 0x20;	/* CVBS only */
+		else
+			state->reg_2d = 0x08;	/* 00001000 CVBS only, RGB DAC's off (high impedance mode) */
+		state->reg_3a = 0x13;	/* by default switch YUV to RGB-matrix on */
+		break;
+
+	case SAA7127_OUTPUT_TYPE_SVIDEO:
+		if (state->ident == SAA7129)
+			state->reg_2d = 0x18;	/* Y + C */
+		else
+			state->reg_2d = 0xff;   /*11111111  croma -> R, luma -> CVBS + G + B */
+		state->reg_3a = 0x13;	/* by default switch YUV to RGB-matrix on */
+		break;
+
+	case SAA7127_OUTPUT_TYPE_YUV_V:
+		state->reg_2d = 0x4f;	/* reg 2D = 01001111, all DAC's on, RGB + VBS */
+		state->reg_3a = 0x0b;	/* reg 3A = 00001011, bypass RGB-matrix */
+		break;
+
+	case SAA7127_OUTPUT_TYPE_YUV_C:
+		state->reg_2d = 0x0f;	/* reg 2D = 00001111, all DAC's on, RGB + CVBS */
+		state->reg_3a = 0x0b;	/* reg 3A = 00001011, bypass RGB-matrix */
+		break;
+
+	case SAA7127_OUTPUT_TYPE_BOTH:
+		if (state->ident == SAA7129)
+			state->reg_2d = 0x38;
+		else
+			state->reg_2d = 0xbf;
+		state->reg_3a = 0x13;	/* by default switch YUV to RGB-matrix on */
+		break;
+
+	default:
+		return -EINVAL;
+	}
+	v4l2_dbg(1, debug, sd,
+		"Selecting %s output type\n", output_strs[output]);
+
+	/* Configure Encoder */
+	saa7127_write(sd, 0x2d, state->reg_2d);
+	saa7127_write(sd, 0x3a, state->reg_3a | state->reg_3a_cb);
+	state->output_type = output;
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_set_input_type(struct v4l2_subdev *sd, int input)
+{
+	struct saa7127_state *state = to_state(sd);
+
+	switch (input) {
+	case SAA7127_INPUT_TYPE_NORMAL:	/* avia */
+		v4l2_dbg(1, debug, sd, "Selecting Normal Encoder Input\n");
+		state->reg_3a_cb = 0;
+		break;
+
+	case SAA7127_INPUT_TYPE_TEST_IMAGE:	/* color bar */
+		v4l2_dbg(1, debug, sd, "Selecting Color Bar generator\n");
+		state->reg_3a_cb = 0x80;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+	saa7127_write(sd, 0x3a, state->reg_3a | state->reg_3a_cb);
+	state->input_type = input;
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
+{
+	struct saa7127_state *state = to_state(sd);
+
+	if (state->std == std)
+		return 0;
+	return saa7127_set_std(sd, std);
+}
+
+static int saa7127_s_routing(struct v4l2_subdev *sd,
+			     u32 input, u32 output, u32 config)
+{
+	struct saa7127_state *state = to_state(sd);
+	int rc = 0;
+
+	if (state->input_type != input)
+		rc = saa7127_set_input_type(sd, input);
+	if (rc == 0 && state->output_type != output)
+		rc = saa7127_set_output_type(sd, output);
+	return rc;
+}
+
+static int saa7127_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct saa7127_state *state = to_state(sd);
+
+	if (state->video_enable == enable)
+		return 0;
+	return saa7127_set_video_enable(sd, enable);
+}
+
+static int saa7127_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt)
+{
+	struct saa7127_state *state = to_state(sd);
+
+	memset(fmt->service_lines, 0, sizeof(fmt->service_lines));
+	if (state->vps_enable)
+		fmt->service_lines[0][16] = V4L2_SLICED_VPS;
+	if (state->wss_enable)
+		fmt->service_lines[0][23] = V4L2_SLICED_WSS_625;
+	if (state->cc_enable) {
+		fmt->service_lines[0][21] = V4L2_SLICED_CAPTION_525;
+		fmt->service_lines[1][21] = V4L2_SLICED_CAPTION_525;
+	}
+	fmt->service_set =
+		(state->vps_enable ? V4L2_SLICED_VPS : 0) |
+		(state->wss_enable ? V4L2_SLICED_WSS_625 : 0) |
+		(state->cc_enable ? V4L2_SLICED_CAPTION_525 : 0);
+	return 0;
+}
+
+static int saa7127_s_vbi_data(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data)
+{
+	switch (data->id) {
+	case V4L2_SLICED_WSS_625:
+		return saa7127_set_wss(sd, data);
+	case V4L2_SLICED_VPS:
+		return saa7127_set_vps(sd, data);
+	case V4L2_SLICED_CAPTION_525:
+		if (data->field == 0)
+			return saa7127_set_cc(sd, data);
+		return saa7127_set_xds(sd, data);
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int saa7127_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
+{
+	reg->val = saa7127_read(sd, reg->reg & 0xff);
+	reg->size = 1;
+	return 0;
+}
+
+static int saa7127_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
+{
+	saa7127_write(sd, reg->reg & 0xff, reg->val & 0xff);
+	return 0;
+}
+#endif
+
+static int saa7127_log_status(struct v4l2_subdev *sd)
+{
+	struct saa7127_state *state = to_state(sd);
+
+	v4l2_info(sd, "Standard: %s\n", (state->std & V4L2_STD_525_60) ? "60 Hz" : "50 Hz");
+	v4l2_info(sd, "Input:    %s\n", state->input_type ?  "color bars" : "normal");
+	v4l2_info(sd, "Output:   %s\n", state->video_enable ?
+			output_strs[state->output_type] : "disabled");
+	v4l2_info(sd, "WSS:      %s\n", state->wss_enable ?
+			wss_strs[state->wss_mode] : "disabled");
+	v4l2_info(sd, "VPS:      %s\n", state->vps_enable ? "enabled" : "disabled");
+	v4l2_info(sd, "CC:       %s\n", state->cc_enable ? "enabled" : "disabled");
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static const struct v4l2_subdev_core_ops saa7127_core_ops = {
+	.log_status = saa7127_log_status,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register = saa7127_g_register,
+	.s_register = saa7127_s_register,
+#endif
+};
+
+static const struct v4l2_subdev_video_ops saa7127_video_ops = {
+	.s_std_output = saa7127_s_std_output,
+	.s_routing = saa7127_s_routing,
+	.s_stream = saa7127_s_stream,
+};
+
+static const struct v4l2_subdev_vbi_ops saa7127_vbi_ops = {
+	.s_vbi_data = saa7127_s_vbi_data,
+	.g_sliced_fmt = saa7127_g_sliced_fmt,
+};
+
+static const struct v4l2_subdev_ops saa7127_ops = {
+	.core = &saa7127_core_ops,
+	.video = &saa7127_video_ops,
+	.vbi = &saa7127_vbi_ops,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7127_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct saa7127_state *state;
+	struct v4l2_subdev *sd;
+	struct v4l2_sliced_vbi_data vbi = { 0, 0, 0, 0 };  /* set to disabled */
+
+	/* Check if the adapter supports the needed features */
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+
+	v4l_dbg(1, debug, client, "detecting saa7127 client on address 0x%x\n",
+			client->addr << 1);
+
+	state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL);
+	if (state == NULL)
+		return -ENOMEM;
+
+	sd = &state->sd;
+	v4l2_i2c_subdev_init(sd, client, &saa7127_ops);
+
+	/* First test register 0: Bits 5-7 are a version ID (should be 0),
+	   and bit 2 should also be 0.
+	   This is rather general, so the second test is more specific and
+	   looks at the 'ending point of burst in clock cycles' which is
+	   0x1d after a reset and not expected to ever change. */
+	if ((saa7127_read(sd, 0) & 0xe4) != 0 ||
+			(saa7127_read(sd, 0x29) & 0x3f) != 0x1d) {
+		v4l2_dbg(1, debug, sd, "saa7127 not found\n");
+		return -ENODEV;
+	}
+
+	if (id->driver_data) {	/* Chip type is already known */
+		state->ident = id->driver_data;
+	} else {		/* Needs detection */
+		int read_result;
+
+		/* Detect if it's an saa7129 */
+		read_result = saa7127_read(sd, SAA7129_REG_FADE_KEY_COL2);
+		saa7127_write(sd, SAA7129_REG_FADE_KEY_COL2, 0xaa);
+		if (saa7127_read(sd, SAA7129_REG_FADE_KEY_COL2) == 0xaa) {
+			saa7127_write(sd, SAA7129_REG_FADE_KEY_COL2,
+					read_result);
+			state->ident = SAA7129;
+			strscpy(client->name, "saa7129", I2C_NAME_SIZE);
+		} else {
+			state->ident = SAA7127;
+			strscpy(client->name, "saa7127", I2C_NAME_SIZE);
+		}
+	}
+
+	v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
+			client->addr << 1, client->adapter->name);
+
+	v4l2_dbg(1, debug, sd, "Configuring encoder\n");
+	saa7127_write_inittab(sd, saa7127_init_config_common);
+	saa7127_set_std(sd, V4L2_STD_NTSC);
+	saa7127_set_output_type(sd, SAA7127_OUTPUT_TYPE_BOTH);
+	saa7127_set_vps(sd, &vbi);
+	saa7127_set_wss(sd, &vbi);
+	saa7127_set_cc(sd, &vbi);
+	saa7127_set_xds(sd, &vbi);
+	if (test_image == 1)
+		/* The Encoder has an internal Colorbar generator */
+		/* This can be used for debugging */
+		saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_TEST_IMAGE);
+	else
+		saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_NORMAL);
+	saa7127_set_video_enable(sd, 1);
+
+	if (state->ident == SAA7129)
+		saa7127_write_inittab(sd, saa7129_init_config_extra);
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static void saa7127_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+	v4l2_device_unregister_subdev(sd);
+	/* Turn off TV output */
+	saa7127_set_video_enable(sd, 0);
+}
+
+/* ----------------------------------------------------------------------- */
+
+static const struct i2c_device_id saa7127_id[] = {
+	{ "saa7127_auto", 0 },	/* auto-detection */
+	{ "saa7126", SAA7127 },
+	{ "saa7127", SAA7127 },
+	{ "saa7128", SAA7129 },
+	{ "saa7129", SAA7129 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, saa7127_id);
+
+static struct i2c_driver saa7127_driver = {
+	.driver = {
+		.name	= "saa7127",
+	},
+	.probe		= saa7127_probe,
+	.remove		= saa7127_remove,
+	.id_table	= saa7127_id,
+};
+
+module_i2c_driver(saa7127_driver);