Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 797 insertions, 0 deletions

diff --git a/drivers/media/platform/microchip/microchip-csi2dc.c b/drivers/media/platform/microchip/microchip-csi2dc.c
new file mode 100644
index 000000000..d5b359f60
--- /dev/null
+++ b/drivers/media/platform/microchip/microchip-csi2dc.c
@@ -0,0 +1,797 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Microchip CSI2 Demux Controller (CSI2DC) driver
+ *
+ * Copyright (C) 2018 Microchip Technology, Inc.
+ *
+ * Author: Eugen Hristev <eugen.hristev@microchip.com>
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/videodev2.h>
+
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-subdev.h>
+
+/* Global configuration register */
+#define CSI2DC_GCFG			0x0
+
+/* MIPI sensor pixel clock is free running */
+#define CSI2DC_GCFG_MIPIFRN		BIT(0)
+/* GPIO parallel interface selection */
+#define CSI2DC_GCFG_GPIOSEL		BIT(1)
+/* Output waveform inter-line minimum delay */
+#define CSI2DC_GCFG_HLC(v)		((v) << 4)
+#define CSI2DC_GCFG_HLC_MASK		GENMASK(7, 4)
+/* SAMA7G5 requires a HLC delay of 15 */
+#define SAMA7G5_HLC			(15)
+
+/* Global control register */
+#define CSI2DC_GCTLR			0x04
+#define CSI2DC_GCTLR_SWRST		BIT(0)
+
+/* Global status register */
+#define CSI2DC_GS			0x08
+
+/* SSP interrupt status register */
+#define CSI2DC_SSPIS			0x28
+/* Pipe update register */
+#define CSI2DC_PU			0xc0
+/* Video pipe attributes update */
+#define CSI2DC_PU_VP			BIT(0)
+
+/* Pipe update status register */
+#define CSI2DC_PUS			0xc4
+
+/* Video pipeline Interrupt Status Register */
+#define CSI2DC_VPISR			0xf4
+
+/* Video pipeline enable register */
+#define CSI2DC_VPE			0xf8
+#define CSI2DC_VPE_ENABLE		BIT(0)
+
+/* Video pipeline configuration register */
+#define CSI2DC_VPCFG			0xfc
+/* Data type */
+#define CSI2DC_VPCFG_DT(v)		((v) << 0)
+#define CSI2DC_VPCFG_DT_MASK		GENMASK(5, 0)
+/* Virtual channel identifier */
+#define CSI2DC_VPCFG_VC(v)		((v) << 6)
+#define CSI2DC_VPCFG_VC_MASK		GENMASK(7, 6)
+/* Decompression enable */
+#define CSI2DC_VPCFG_DE			BIT(8)
+/* Decoder mode */
+#define CSI2DC_VPCFG_DM(v)		((v) << 9)
+#define CSI2DC_VPCFG_DM_DECODER8TO12	0
+/* Decoder predictor 2 selection */
+#define CSI2DC_VPCFG_DP2		BIT(12)
+/* Recommended memory storage */
+#define CSI2DC_VPCFG_RMS		BIT(13)
+/* Post adjustment */
+#define CSI2DC_VPCFG_PA			BIT(14)
+
+/* Video pipeline column register */
+#define CSI2DC_VPCOL			0x100
+/* Column number */
+#define CSI2DC_VPCOL_COL(v)		((v) << 0)
+#define CSI2DC_VPCOL_COL_MASK		GENMASK(15, 0)
+
+/* Video pipeline row register */
+#define CSI2DC_VPROW			0x104
+/* Row number */
+#define CSI2DC_VPROW_ROW(v)		((v) << 0)
+#define CSI2DC_VPROW_ROW_MASK		GENMASK(15, 0)
+
+/* Version register */
+#define CSI2DC_VERSION			0x1fc
+
+/* register read/write helpers */
+#define csi2dc_readl(st, reg)		readl_relaxed((st)->base + (reg))
+#define csi2dc_writel(st, reg, val)	writel_relaxed((val), \
+					(st)->base + (reg))
+
+/* supported RAW data types */
+#define CSI2DC_DT_RAW6			0x28
+#define CSI2DC_DT_RAW7			0x29
+#define CSI2DC_DT_RAW8			0x2a
+#define CSI2DC_DT_RAW10			0x2b
+#define CSI2DC_DT_RAW12			0x2c
+#define CSI2DC_DT_RAW14			0x2d
+/* YUV data types */
+#define CSI2DC_DT_YUV422_8B		0x1e
+
+/*
+ * struct csi2dc_format - CSI2DC format type struct
+ * @mbus_code:		Media bus code for the format
+ * @dt:			Data type constant for this format
+ */
+struct csi2dc_format {
+	u32				mbus_code;
+	u32				dt;
+};
+
+static const struct csi2dc_format csi2dc_formats[] = {
+	{
+		.mbus_code =		MEDIA_BUS_FMT_SRGGB8_1X8,
+		.dt =			CSI2DC_DT_RAW8,
+	}, {
+		.mbus_code =		MEDIA_BUS_FMT_SBGGR8_1X8,
+		.dt =			CSI2DC_DT_RAW8,
+	}, {
+		.mbus_code =		MEDIA_BUS_FMT_SGRBG8_1X8,
+		.dt =			CSI2DC_DT_RAW8,
+	}, {
+		.mbus_code =		MEDIA_BUS_FMT_SGBRG8_1X8,
+		.dt =			CSI2DC_DT_RAW8,
+	}, {
+		.mbus_code =		MEDIA_BUS_FMT_SRGGB10_1X10,
+		.dt =			CSI2DC_DT_RAW10,
+	}, {
+		.mbus_code =		MEDIA_BUS_FMT_SBGGR10_1X10,
+		.dt =			CSI2DC_DT_RAW10,
+	}, {
+		.mbus_code =		MEDIA_BUS_FMT_SGRBG10_1X10,
+		.dt =			CSI2DC_DT_RAW10,
+	}, {
+		.mbus_code =		MEDIA_BUS_FMT_SGBRG10_1X10,
+		.dt =			CSI2DC_DT_RAW10,
+	}, {
+		.mbus_code =		MEDIA_BUS_FMT_YUYV8_2X8,
+		.dt =			CSI2DC_DT_YUV422_8B,
+	},
+};
+
+enum mipi_csi_pads {
+	CSI2DC_PAD_SINK			= 0,
+	CSI2DC_PAD_SOURCE		= 1,
+	CSI2DC_PADS_NUM			= 2,
+};
+
+/*
+ * struct csi2dc_device - CSI2DC device driver data/config struct
+ * @base:		Register map base address
+ * @csi2dc_sd:		v4l2 subdevice for the csi2dc device
+ *			This is the subdevice that the csi2dc device itself
+ *			registers in v4l2 subsystem
+ * @dev:		struct device for this csi2dc device
+ * @pclk:		Peripheral clock reference
+ *			Input clock that clocks the hardware block internal
+ *			logic
+ * @scck:		Sensor Controller clock reference
+ *			Input clock that is used to generate the pixel clock
+ * @format:		Current saved format used in g/s fmt
+ * @cur_fmt:		Current state format
+ * @try_fmt:		Try format that is being tried
+ * @pads:		Media entity pads for the csi2dc subdevice
+ * @clk_gated:		Whether the clock is gated or free running
+ * @video_pipe:		Whether video pipeline is configured
+ * @parallel_mode:	The underlying subdevice is connected on a parallel bus
+ * @vc:			Current set virtual channel
+ * @notifier:		Async notifier that is used to bound the underlying
+ *			subdevice to the csi2dc subdevice
+ * @input_sd:		Reference to the underlying subdevice bound to the
+ *			csi2dc subdevice
+ * @remote_pad:		Pad number of the underlying subdevice that is linked
+ *			to the csi2dc subdevice sink pad.
+ */
+struct csi2dc_device {
+	void __iomem			*base;
+	struct v4l2_subdev		csi2dc_sd;
+	struct device			*dev;
+	struct clk			*pclk;
+	struct clk			*scck;
+
+	struct v4l2_mbus_framefmt	 format;
+
+	const struct csi2dc_format	*cur_fmt;
+	const struct csi2dc_format	*try_fmt;
+
+	struct media_pad		pads[CSI2DC_PADS_NUM];
+
+	bool				clk_gated;
+	bool				video_pipe;
+	bool				parallel_mode;
+	u32				vc;
+
+	struct v4l2_async_notifier	notifier;
+
+	struct v4l2_subdev		*input_sd;
+
+	u32				remote_pad;
+};
+
+static inline struct csi2dc_device *
+csi2dc_sd_to_csi2dc_device(struct v4l2_subdev *csi2dc_sd)
+{
+	return container_of(csi2dc_sd, struct csi2dc_device, csi2dc_sd);
+}
+
+static int csi2dc_enum_mbus_code(struct v4l2_subdev *csi2dc_sd,
+				 struct v4l2_subdev_state *sd_state,
+				 struct v4l2_subdev_mbus_code_enum *code)
+{
+	if (code->index >= ARRAY_SIZE(csi2dc_formats))
+		return -EINVAL;
+
+	code->code = csi2dc_formats[code->index].mbus_code;
+
+	return 0;
+}
+
+static int csi2dc_get_fmt(struct v4l2_subdev *csi2dc_sd,
+			  struct v4l2_subdev_state *sd_state,
+			  struct v4l2_subdev_format *format)
+{
+	struct csi2dc_device *csi2dc = csi2dc_sd_to_csi2dc_device(csi2dc_sd);
+	struct v4l2_mbus_framefmt *v4l2_try_fmt;
+
+	if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
+		v4l2_try_fmt = v4l2_subdev_get_try_format(csi2dc_sd, sd_state,
+							  format->pad);
+		format->format = *v4l2_try_fmt;
+
+		return 0;
+	}
+
+	format->format = csi2dc->format;
+
+	return 0;
+}
+
+static int csi2dc_set_fmt(struct v4l2_subdev *csi2dc_sd,
+			  struct v4l2_subdev_state *sd_state,
+			  struct v4l2_subdev_format *req_fmt)
+{
+	struct csi2dc_device *csi2dc = csi2dc_sd_to_csi2dc_device(csi2dc_sd);
+	const struct csi2dc_format *fmt, *try_fmt = NULL;
+	struct v4l2_mbus_framefmt *v4l2_try_fmt;
+	unsigned int i;
+
+	/*
+	 * Setting the source pad is disabled.
+	 * The same format is being propagated from the sink to source.
+	 */
+	if (req_fmt->pad == CSI2DC_PAD_SOURCE)
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(csi2dc_formats);  i++) {
+		fmt = &csi2dc_formats[i];
+		if (req_fmt->format.code == fmt->mbus_code)
+			try_fmt = fmt;
+		fmt++;
+	}
+
+	/* in case we could not find the desired format, default to something */
+	if (!try_fmt) {
+		try_fmt = &csi2dc_formats[0];
+
+		dev_dbg(csi2dc->dev,
+			"CSI2DC unsupported format 0x%x, defaulting to 0x%x\n",
+			req_fmt->format.code, csi2dc_formats[0].mbus_code);
+	}
+
+	req_fmt->format.code = try_fmt->mbus_code;
+	req_fmt->format.colorspace = V4L2_COLORSPACE_SRGB;
+	req_fmt->format.field = V4L2_FIELD_NONE;
+
+	if (req_fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+		v4l2_try_fmt = v4l2_subdev_get_try_format(csi2dc_sd, sd_state,
+							  req_fmt->pad);
+		*v4l2_try_fmt = req_fmt->format;
+		/* Trying on the sink pad makes the source pad change too */
+		v4l2_try_fmt = v4l2_subdev_get_try_format(csi2dc_sd,
+							  sd_state,
+							  CSI2DC_PAD_SOURCE);
+		*v4l2_try_fmt = req_fmt->format;
+
+		/* if we are just trying, we are done */
+		return 0;
+	}
+
+	/* save the format for later requests */
+	csi2dc->format = req_fmt->format;
+
+	/* update config */
+	csi2dc->cur_fmt = try_fmt;
+
+	dev_dbg(csi2dc->dev, "new format set: 0x%x @%dx%d\n",
+		csi2dc->format.code, csi2dc->format.width,
+		csi2dc->format.height);
+
+	return 0;
+}
+
+static int csi2dc_power(struct csi2dc_device *csi2dc, int on)
+{
+	int ret = 0;
+
+	if (on) {
+		ret = clk_prepare_enable(csi2dc->pclk);
+		if (ret) {
+			dev_err(csi2dc->dev, "failed to enable pclk:%d\n", ret);
+			return ret;
+		}
+
+		ret = clk_prepare_enable(csi2dc->scck);
+		if (ret) {
+			dev_err(csi2dc->dev, "failed to enable scck:%d\n", ret);
+			clk_disable_unprepare(csi2dc->pclk);
+			return ret;
+		}
+
+		/* if powering up, deassert reset line */
+		csi2dc_writel(csi2dc, CSI2DC_GCTLR, CSI2DC_GCTLR_SWRST);
+	} else {
+		/* if powering down, assert reset line */
+		csi2dc_writel(csi2dc, CSI2DC_GCTLR, 0);
+
+		clk_disable_unprepare(csi2dc->scck);
+		clk_disable_unprepare(csi2dc->pclk);
+	}
+
+	return ret;
+}
+
+static int csi2dc_get_mbus_config(struct csi2dc_device *csi2dc)
+{
+	struct v4l2_mbus_config mbus_config = { 0 };
+	int ret;
+
+	ret = v4l2_subdev_call(csi2dc->input_sd, pad, get_mbus_config,
+			       csi2dc->remote_pad, &mbus_config);
+	if (ret == -ENOIOCTLCMD) {
+		dev_dbg(csi2dc->dev,
+			"no remote mbus configuration available\n");
+		return 0;
+	}
+
+	if (ret) {
+		dev_err(csi2dc->dev,
+			"failed to get remote mbus configuration\n");
+		return 0;
+	}
+
+	dev_dbg(csi2dc->dev, "subdev sending on channel %d\n", csi2dc->vc);
+
+	csi2dc->clk_gated = mbus_config.bus.parallel.flags &
+				V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK;
+
+	dev_dbg(csi2dc->dev, "mbus_config: %s clock\n",
+		csi2dc->clk_gated ? "gated" : "free running");
+
+	return 0;
+}
+
+static void csi2dc_vp_update(struct csi2dc_device *csi2dc)
+{
+	u32 vp, gcfg;
+
+	if (!csi2dc->video_pipe) {
+		dev_err(csi2dc->dev, "video pipeline unavailable\n");
+		return;
+	}
+
+	if (csi2dc->parallel_mode) {
+		/* In parallel mode, GPIO parallel interface must be selected */
+		gcfg = csi2dc_readl(csi2dc, CSI2DC_GCFG);
+		gcfg |= CSI2DC_GCFG_GPIOSEL;
+		csi2dc_writel(csi2dc, CSI2DC_GCFG, gcfg);
+		return;
+	}
+
+	/* serial video pipeline */
+
+	csi2dc_writel(csi2dc, CSI2DC_GCFG,
+		      (SAMA7G5_HLC & CSI2DC_GCFG_HLC_MASK) |
+		      (csi2dc->clk_gated ? 0 : CSI2DC_GCFG_MIPIFRN));
+
+	vp = CSI2DC_VPCFG_DT(csi2dc->cur_fmt->dt) & CSI2DC_VPCFG_DT_MASK;
+	vp |= CSI2DC_VPCFG_VC(csi2dc->vc) & CSI2DC_VPCFG_VC_MASK;
+	vp &= ~CSI2DC_VPCFG_DE;
+	vp |= CSI2DC_VPCFG_DM(CSI2DC_VPCFG_DM_DECODER8TO12);
+	vp &= ~CSI2DC_VPCFG_DP2;
+	vp &= ~CSI2DC_VPCFG_RMS;
+	vp |= CSI2DC_VPCFG_PA;
+
+	csi2dc_writel(csi2dc, CSI2DC_VPCFG, vp);
+	csi2dc_writel(csi2dc, CSI2DC_VPE, CSI2DC_VPE_ENABLE);
+	csi2dc_writel(csi2dc, CSI2DC_PU, CSI2DC_PU_VP);
+}
+
+static int csi2dc_s_stream(struct v4l2_subdev *csi2dc_sd, int enable)
+{
+	struct csi2dc_device *csi2dc = csi2dc_sd_to_csi2dc_device(csi2dc_sd);
+	int ret;
+
+	if (enable) {
+		ret = pm_runtime_resume_and_get(csi2dc->dev);
+		if (ret < 0)
+			return ret;
+
+		csi2dc_get_mbus_config(csi2dc);
+
+		csi2dc_vp_update(csi2dc);
+
+		return v4l2_subdev_call(csi2dc->input_sd, video, s_stream,
+					true);
+	}
+
+	dev_dbg(csi2dc->dev,
+		"Last frame received: VPCOLR = %u, VPROWR= %u, VPISR = %x\n",
+		csi2dc_readl(csi2dc, CSI2DC_VPCOL),
+		csi2dc_readl(csi2dc, CSI2DC_VPROW),
+		csi2dc_readl(csi2dc, CSI2DC_VPISR));
+
+	/* stop streaming scenario */
+	ret = v4l2_subdev_call(csi2dc->input_sd, video, s_stream, false);
+
+	pm_runtime_put_sync(csi2dc->dev);
+
+	return ret;
+}
+
+static int csi2dc_init_cfg(struct v4l2_subdev *csi2dc_sd,
+			   struct v4l2_subdev_state *sd_state)
+{
+	struct v4l2_mbus_framefmt *v4l2_try_fmt =
+		v4l2_subdev_get_try_format(csi2dc_sd, sd_state, 0);
+
+	v4l2_try_fmt->height = 480;
+	v4l2_try_fmt->width = 640;
+	v4l2_try_fmt->code = csi2dc_formats[0].mbus_code;
+	v4l2_try_fmt->colorspace = V4L2_COLORSPACE_SRGB;
+	v4l2_try_fmt->field = V4L2_FIELD_NONE;
+	v4l2_try_fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
+	v4l2_try_fmt->quantization = V4L2_QUANTIZATION_DEFAULT;
+	v4l2_try_fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT;
+
+	return 0;
+}
+
+static const struct media_entity_operations csi2dc_entity_ops = {
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+static const struct v4l2_subdev_pad_ops csi2dc_pad_ops = {
+	.enum_mbus_code = csi2dc_enum_mbus_code,
+	.set_fmt = csi2dc_set_fmt,
+	.get_fmt = csi2dc_get_fmt,
+	.init_cfg = csi2dc_init_cfg,
+};
+
+static const struct v4l2_subdev_video_ops csi2dc_video_ops = {
+	.s_stream = csi2dc_s_stream,
+};
+
+static const struct v4l2_subdev_ops csi2dc_subdev_ops = {
+	.pad = &csi2dc_pad_ops,
+	.video = &csi2dc_video_ops,
+};
+
+static int csi2dc_async_bound(struct v4l2_async_notifier *notifier,
+			      struct v4l2_subdev *subdev,
+			      struct v4l2_async_subdev *asd)
+{
+	struct csi2dc_device *csi2dc = container_of(notifier,
+						struct csi2dc_device, notifier);
+	int pad;
+	int ret;
+
+	csi2dc->input_sd = subdev;
+
+	pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
+					  MEDIA_PAD_FL_SOURCE);
+	if (pad < 0) {
+		dev_err(csi2dc->dev, "Failed to find pad for %s\n",
+			subdev->name);
+		return pad;
+	}
+
+	csi2dc->remote_pad = pad;
+
+	ret = media_create_pad_link(&csi2dc->input_sd->entity,
+				    csi2dc->remote_pad,
+				    &csi2dc->csi2dc_sd.entity, 0,
+				    MEDIA_LNK_FL_ENABLED);
+	if (ret) {
+		dev_err(csi2dc->dev,
+			"Failed to create pad link: %s to %s\n",
+			csi2dc->input_sd->entity.name,
+			csi2dc->csi2dc_sd.entity.name);
+		return ret;
+	}
+
+	dev_dbg(csi2dc->dev, "link with %s pad: %d\n",
+		csi2dc->input_sd->name, csi2dc->remote_pad);
+
+	return ret;
+}
+
+static const struct v4l2_async_notifier_operations csi2dc_async_ops = {
+	.bound = csi2dc_async_bound,
+};
+
+static int csi2dc_prepare_notifier(struct csi2dc_device *csi2dc,
+				   struct fwnode_handle *input_fwnode)
+{
+	struct v4l2_async_subdev *asd;
+	int ret = 0;
+
+	v4l2_async_nf_init(&csi2dc->notifier);
+
+	asd = v4l2_async_nf_add_fwnode_remote(&csi2dc->notifier,
+					      input_fwnode,
+					      struct v4l2_async_subdev);
+
+	fwnode_handle_put(input_fwnode);
+
+	if (IS_ERR(asd)) {
+		ret = PTR_ERR(asd);
+		dev_err(csi2dc->dev,
+			"failed to add async notifier for node %pOF: %d\n",
+			to_of_node(input_fwnode), ret);
+		v4l2_async_nf_cleanup(&csi2dc->notifier);
+		return ret;
+	}
+
+	csi2dc->notifier.ops = &csi2dc_async_ops;
+
+	ret = v4l2_async_subdev_nf_register(&csi2dc->csi2dc_sd,
+					    &csi2dc->notifier);
+	if (ret) {
+		dev_err(csi2dc->dev, "fail to register async notifier: %d\n",
+			ret);
+		v4l2_async_nf_cleanup(&csi2dc->notifier);
+	}
+
+	return ret;
+}
+
+static int csi2dc_of_parse(struct csi2dc_device *csi2dc,
+			   struct device_node *of_node)
+{
+	struct fwnode_handle *input_fwnode, *output_fwnode;
+	struct v4l2_fwnode_endpoint input_endpoint = { 0 },
+				    output_endpoint = { 0 };
+	int ret;
+
+	input_fwnode = fwnode_graph_get_next_endpoint(of_fwnode_handle(of_node),
+						      NULL);
+	if (!input_fwnode) {
+		dev_err(csi2dc->dev,
+			"missing port node at %pOF, input node is mandatory.\n",
+			of_node);
+		return -EINVAL;
+	}
+
+	ret = v4l2_fwnode_endpoint_parse(input_fwnode, &input_endpoint);
+	if (ret) {
+		dev_err(csi2dc->dev, "endpoint not defined at %pOF\n", of_node);
+		goto csi2dc_of_parse_err;
+	}
+
+	if (input_endpoint.bus_type == V4L2_MBUS_PARALLEL ||
+	    input_endpoint.bus_type == V4L2_MBUS_BT656) {
+		csi2dc->parallel_mode = true;
+		dev_dbg(csi2dc->dev,
+			"subdevice connected on parallel interface\n");
+	}
+
+	if (input_endpoint.bus_type == V4L2_MBUS_CSI2_DPHY) {
+		csi2dc->clk_gated = input_endpoint.bus.mipi_csi2.flags &
+					V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK;
+		dev_dbg(csi2dc->dev,
+			"subdevice connected on serial interface\n");
+		dev_dbg(csi2dc->dev, "DT: %s clock\n",
+			csi2dc->clk_gated ? "gated" : "free running");
+	}
+
+	output_fwnode = fwnode_graph_get_next_endpoint
+				(of_fwnode_handle(of_node), input_fwnode);
+
+	if (output_fwnode)
+		ret = v4l2_fwnode_endpoint_parse(output_fwnode,
+						 &output_endpoint);
+
+	fwnode_handle_put(output_fwnode);
+
+	if (!output_fwnode || ret) {
+		dev_info(csi2dc->dev,
+			 "missing output node at %pOF, data pipe available only.\n",
+			 of_node);
+	} else {
+		if (output_endpoint.bus_type != V4L2_MBUS_PARALLEL &&
+		    output_endpoint.bus_type != V4L2_MBUS_BT656) {
+			dev_err(csi2dc->dev,
+				"output port must be parallel/bt656.\n");
+			ret = -EINVAL;
+			goto csi2dc_of_parse_err;
+		}
+
+		csi2dc->video_pipe = true;
+
+		dev_dbg(csi2dc->dev,
+			"block %pOF [%d.%d]->[%d.%d] video pipeline\n",
+			of_node, input_endpoint.base.port,
+			input_endpoint.base.id, output_endpoint.base.port,
+			output_endpoint.base.id);
+	}
+
+	/* prepare async notifier for subdevice completion */
+	return csi2dc_prepare_notifier(csi2dc, input_fwnode);
+
+csi2dc_of_parse_err:
+	fwnode_handle_put(input_fwnode);
+	return ret;
+}
+
+static void csi2dc_default_format(struct csi2dc_device *csi2dc)
+{
+	csi2dc->cur_fmt = &csi2dc_formats[0];
+
+	csi2dc->format.height = 480;
+	csi2dc->format.width = 640;
+	csi2dc->format.code = csi2dc_formats[0].mbus_code;
+	csi2dc->format.colorspace = V4L2_COLORSPACE_SRGB;
+	csi2dc->format.field = V4L2_FIELD_NONE;
+	csi2dc->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
+	csi2dc->format.quantization = V4L2_QUANTIZATION_DEFAULT;
+	csi2dc->format.xfer_func = V4L2_XFER_FUNC_DEFAULT;
+}
+
+static int csi2dc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct csi2dc_device *csi2dc;
+	int ret = 0;
+	u32 ver;
+
+	csi2dc = devm_kzalloc(dev, sizeof(*csi2dc), GFP_KERNEL);
+	if (!csi2dc)
+		return -ENOMEM;
+
+	csi2dc->dev = dev;
+
+	csi2dc->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(csi2dc->base)) {
+		dev_err(dev, "base address not set\n");
+		return PTR_ERR(csi2dc->base);
+	}
+
+	csi2dc->pclk = devm_clk_get(dev, "pclk");
+	if (IS_ERR(csi2dc->pclk)) {
+		ret = PTR_ERR(csi2dc->pclk);
+		dev_err(dev, "failed to get pclk: %d\n", ret);
+		return ret;
+	}
+
+	csi2dc->scck = devm_clk_get(dev, "scck");
+	if (IS_ERR(csi2dc->scck)) {
+		ret = PTR_ERR(csi2dc->scck);
+		dev_err(dev, "failed to get scck: %d\n", ret);
+		return ret;
+	}
+
+	v4l2_subdev_init(&csi2dc->csi2dc_sd, &csi2dc_subdev_ops);
+
+	csi2dc->csi2dc_sd.owner = THIS_MODULE;
+	csi2dc->csi2dc_sd.dev = dev;
+	snprintf(csi2dc->csi2dc_sd.name, sizeof(csi2dc->csi2dc_sd.name),
+		 "csi2dc");
+
+	csi2dc->csi2dc_sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	csi2dc->csi2dc_sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
+	csi2dc->csi2dc_sd.entity.ops = &csi2dc_entity_ops;
+
+	platform_set_drvdata(pdev, csi2dc);
+
+	ret = csi2dc_of_parse(csi2dc, dev->of_node);
+	if (ret)
+		goto csi2dc_probe_cleanup_entity;
+
+	csi2dc->pads[CSI2DC_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
+	if (csi2dc->video_pipe)
+		csi2dc->pads[CSI2DC_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
+
+	ret = media_entity_pads_init(&csi2dc->csi2dc_sd.entity,
+				     csi2dc->video_pipe ? CSI2DC_PADS_NUM : 1,
+				     csi2dc->pads);
+	if (ret < 0) {
+		dev_err(dev, "media entity init failed\n");
+		goto csi2dc_probe_cleanup_notifier;
+	}
+
+	csi2dc_default_format(csi2dc);
+
+	/* turn power on to validate capabilities */
+	ret = csi2dc_power(csi2dc, true);
+	if (ret < 0)
+		goto csi2dc_probe_cleanup_notifier;
+
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	ver = csi2dc_readl(csi2dc, CSI2DC_VERSION);
+
+	/*
+	 * we must register the subdev after PM runtime has been requested,
+	 * otherwise we might bound immediately and request pm_runtime_resume
+	 * before runtime_enable.
+	 */
+	ret = v4l2_async_register_subdev(&csi2dc->csi2dc_sd);
+	if (ret) {
+		dev_err(csi2dc->dev, "failed to register the subdevice\n");
+		goto csi2dc_probe_cleanup_notifier;
+	}
+
+	dev_info(dev, "Microchip CSI2DC version %x\n", ver);
+
+	return 0;
+
+csi2dc_probe_cleanup_notifier:
+	v4l2_async_nf_cleanup(&csi2dc->notifier);
+csi2dc_probe_cleanup_entity:
+	media_entity_cleanup(&csi2dc->csi2dc_sd.entity);
+
+	return ret;
+}
+
+static int csi2dc_remove(struct platform_device *pdev)
+{
+	struct csi2dc_device *csi2dc = platform_get_drvdata(pdev);
+
+	pm_runtime_disable(&pdev->dev);
+
+	v4l2_async_unregister_subdev(&csi2dc->csi2dc_sd);
+	v4l2_async_nf_unregister(&csi2dc->notifier);
+	v4l2_async_nf_cleanup(&csi2dc->notifier);
+	media_entity_cleanup(&csi2dc->csi2dc_sd.entity);
+
+	return 0;
+}
+
+static int __maybe_unused csi2dc_runtime_suspend(struct device *dev)
+{
+	struct csi2dc_device *csi2dc = dev_get_drvdata(dev);
+
+	return csi2dc_power(csi2dc, false);
+}
+
+static int __maybe_unused csi2dc_runtime_resume(struct device *dev)
+{
+	struct csi2dc_device *csi2dc = dev_get_drvdata(dev);
+
+	return csi2dc_power(csi2dc, true);
+}
+
+static const struct dev_pm_ops csi2dc_dev_pm_ops = {
+	SET_RUNTIME_PM_OPS(csi2dc_runtime_suspend, csi2dc_runtime_resume, NULL)
+};
+
+static const struct of_device_id csi2dc_of_match[] = {
+	{ .compatible = "microchip,sama7g5-csi2dc" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, csi2dc_of_match);
+
+static struct platform_driver csi2dc_driver = {
+	.probe	= csi2dc_probe,
+	.remove = csi2dc_remove,
+	.driver = {
+		.name =			"microchip-csi2dc",
+		.pm =			&csi2dc_dev_pm_ops,
+		.of_match_table =	of_match_ptr(csi2dc_of_match),
+	},
+};
+
+module_platform_driver(csi2dc_driver);
+
+MODULE_AUTHOR("Eugen Hristev <eugen.hristev@microchip.com>");
+MODULE_DESCRIPTION("Microchip CSI2 Demux Controller driver");
+MODULE_LICENSE("GPL v2");