Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 286 insertions, 0 deletions

diff --git a/drivers/media/platform/renesas/vsp1/vsp1_clu.c b/drivers/media/platform/renesas/vsp1/vsp1_clu.c
new file mode 100644
index 000000000..c5217fee2
--- /dev/null
+++ b/drivers/media/platform/renesas/vsp1/vsp1_clu.c
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * vsp1_clu.c  --  R-Car VSP1 Cubic Look-Up Table
+ *
+ * Copyright (C) 2015-2016 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#include <linux/device.h>
+#include <linux/slab.h>
+
+#include <media/v4l2-subdev.h>
+
+#include "vsp1.h"
+#include "vsp1_clu.h"
+#include "vsp1_dl.h"
+
+#define CLU_MIN_SIZE				4U
+#define CLU_MAX_SIZE				8190U
+
+#define CLU_SIZE				(17 * 17 * 17)
+
+/* -----------------------------------------------------------------------------
+ * Device Access
+ */
+
+static inline void vsp1_clu_write(struct vsp1_clu *clu,
+				  struct vsp1_dl_body *dlb, u32 reg, u32 data)
+{
+	vsp1_dl_body_write(dlb, reg, data);
+}
+
+/* -----------------------------------------------------------------------------
+ * Controls
+ */
+
+#define V4L2_CID_VSP1_CLU_TABLE			(V4L2_CID_USER_BASE | 0x1001)
+#define V4L2_CID_VSP1_CLU_MODE			(V4L2_CID_USER_BASE | 0x1002)
+#define V4L2_CID_VSP1_CLU_MODE_2D		0
+#define V4L2_CID_VSP1_CLU_MODE_3D		1
+
+static int clu_set_table(struct vsp1_clu *clu, struct v4l2_ctrl *ctrl)
+{
+	struct vsp1_dl_body *dlb;
+	unsigned int i;
+
+	dlb = vsp1_dl_body_get(clu->pool);
+	if (!dlb)
+		return -ENOMEM;
+
+	vsp1_dl_body_write(dlb, VI6_CLU_ADDR, 0);
+	for (i = 0; i < CLU_SIZE; ++i)
+		vsp1_dl_body_write(dlb, VI6_CLU_DATA, ctrl->p_new.p_u32[i]);
+
+	spin_lock_irq(&clu->lock);
+	swap(clu->clu, dlb);
+	spin_unlock_irq(&clu->lock);
+
+	vsp1_dl_body_put(dlb);
+	return 0;
+}
+
+static int clu_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct vsp1_clu *clu =
+		container_of(ctrl->handler, struct vsp1_clu, ctrls);
+
+	switch (ctrl->id) {
+	case V4L2_CID_VSP1_CLU_TABLE:
+		clu_set_table(clu, ctrl);
+		break;
+
+	case V4L2_CID_VSP1_CLU_MODE:
+		clu->mode = ctrl->val;
+		break;
+	}
+
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops clu_ctrl_ops = {
+	.s_ctrl = clu_s_ctrl,
+};
+
+static const struct v4l2_ctrl_config clu_table_control = {
+	.ops = &clu_ctrl_ops,
+	.id = V4L2_CID_VSP1_CLU_TABLE,
+	.name = "Look-Up Table",
+	.type = V4L2_CTRL_TYPE_U32,
+	.min = 0x00000000,
+	.max = 0x00ffffff,
+	.step = 1,
+	.def = 0,
+	.dims = { 17, 17, 17 },
+};
+
+static const char * const clu_mode_menu[] = {
+	"2D",
+	"3D",
+	NULL,
+};
+
+static const struct v4l2_ctrl_config clu_mode_control = {
+	.ops = &clu_ctrl_ops,
+	.id = V4L2_CID_VSP1_CLU_MODE,
+	.name = "Mode",
+	.type = V4L2_CTRL_TYPE_MENU,
+	.min = 0,
+	.max = 1,
+	.def = 1,
+	.qmenu = clu_mode_menu,
+};
+
+/* -----------------------------------------------------------------------------
+ * V4L2 Subdevice Pad Operations
+ */
+
+static const unsigned int clu_codes[] = {
+	MEDIA_BUS_FMT_ARGB8888_1X32,
+	MEDIA_BUS_FMT_AHSV8888_1X32,
+	MEDIA_BUS_FMT_AYUV8_1X32,
+};
+
+static int clu_enum_mbus_code(struct v4l2_subdev *subdev,
+			      struct v4l2_subdev_state *sd_state,
+			      struct v4l2_subdev_mbus_code_enum *code)
+{
+	return vsp1_subdev_enum_mbus_code(subdev, sd_state, code, clu_codes,
+					  ARRAY_SIZE(clu_codes));
+}
+
+static int clu_enum_frame_size(struct v4l2_subdev *subdev,
+			       struct v4l2_subdev_state *sd_state,
+			       struct v4l2_subdev_frame_size_enum *fse)
+{
+	return vsp1_subdev_enum_frame_size(subdev, sd_state, fse,
+					   CLU_MIN_SIZE,
+					   CLU_MIN_SIZE, CLU_MAX_SIZE,
+					   CLU_MAX_SIZE);
+}
+
+static int clu_set_format(struct v4l2_subdev *subdev,
+			  struct v4l2_subdev_state *sd_state,
+			  struct v4l2_subdev_format *fmt)
+{
+	return vsp1_subdev_set_pad_format(subdev, sd_state, fmt, clu_codes,
+					  ARRAY_SIZE(clu_codes),
+					  CLU_MIN_SIZE, CLU_MIN_SIZE,
+					  CLU_MAX_SIZE, CLU_MAX_SIZE);
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 Subdevice Operations
+ */
+
+static const struct v4l2_subdev_pad_ops clu_pad_ops = {
+	.init_cfg = vsp1_entity_init_cfg,
+	.enum_mbus_code = clu_enum_mbus_code,
+	.enum_frame_size = clu_enum_frame_size,
+	.get_fmt = vsp1_subdev_get_pad_format,
+	.set_fmt = clu_set_format,
+};
+
+static const struct v4l2_subdev_ops clu_ops = {
+	.pad    = &clu_pad_ops,
+};
+
+/* -----------------------------------------------------------------------------
+ * VSP1 Entity Operations
+ */
+
+static void clu_configure_stream(struct vsp1_entity *entity,
+				 struct vsp1_pipeline *pipe,
+				 struct vsp1_dl_list *dl,
+				 struct vsp1_dl_body *dlb)
+{
+	struct vsp1_clu *clu = to_clu(&entity->subdev);
+	struct v4l2_mbus_framefmt *format;
+
+	/*
+	 * The yuv_mode can't be changed during streaming. Cache it internally
+	 * for future runtime configuration calls.
+	 */
+	format = vsp1_entity_get_pad_format(&clu->entity,
+					    clu->entity.config,
+					    CLU_PAD_SINK);
+	clu->yuv_mode = format->code == MEDIA_BUS_FMT_AYUV8_1X32;
+}
+
+static void clu_configure_frame(struct vsp1_entity *entity,
+				struct vsp1_pipeline *pipe,
+				struct vsp1_dl_list *dl,
+				struct vsp1_dl_body *dlb)
+{
+	struct vsp1_clu *clu = to_clu(&entity->subdev);
+	struct vsp1_dl_body *clu_dlb;
+	unsigned long flags;
+	u32 ctrl = VI6_CLU_CTRL_AAI | VI6_CLU_CTRL_MVS | VI6_CLU_CTRL_EN;
+
+	/* 2D mode can only be used with the YCbCr pixel encoding. */
+	if (clu->mode == V4L2_CID_VSP1_CLU_MODE_2D && clu->yuv_mode)
+		ctrl |= VI6_CLU_CTRL_AX1I_2D | VI6_CLU_CTRL_AX2I_2D
+		     |  VI6_CLU_CTRL_OS0_2D | VI6_CLU_CTRL_OS1_2D
+		     |  VI6_CLU_CTRL_OS2_2D | VI6_CLU_CTRL_M2D;
+
+	vsp1_clu_write(clu, dlb, VI6_CLU_CTRL, ctrl);
+
+	spin_lock_irqsave(&clu->lock, flags);
+	clu_dlb = clu->clu;
+	clu->clu = NULL;
+	spin_unlock_irqrestore(&clu->lock, flags);
+
+	if (clu_dlb) {
+		vsp1_dl_list_add_body(dl, clu_dlb);
+
+		/* Release our local reference. */
+		vsp1_dl_body_put(clu_dlb);
+	}
+}
+
+static void clu_destroy(struct vsp1_entity *entity)
+{
+	struct vsp1_clu *clu = to_clu(&entity->subdev);
+
+	vsp1_dl_body_pool_destroy(clu->pool);
+}
+
+static const struct vsp1_entity_operations clu_entity_ops = {
+	.configure_stream = clu_configure_stream,
+	.configure_frame = clu_configure_frame,
+	.destroy = clu_destroy,
+};
+
+/* -----------------------------------------------------------------------------
+ * Initialization and Cleanup
+ */
+
+struct vsp1_clu *vsp1_clu_create(struct vsp1_device *vsp1)
+{
+	struct vsp1_clu *clu;
+	int ret;
+
+	clu = devm_kzalloc(vsp1->dev, sizeof(*clu), GFP_KERNEL);
+	if (clu == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	spin_lock_init(&clu->lock);
+
+	clu->entity.ops = &clu_entity_ops;
+	clu->entity.type = VSP1_ENTITY_CLU;
+
+	ret = vsp1_entity_init(vsp1, &clu->entity, "clu", 2, &clu_ops,
+			       MEDIA_ENT_F_PROC_VIDEO_LUT);
+	if (ret < 0)
+		return ERR_PTR(ret);
+
+	/*
+	 * Pre-allocate a body pool, with 3 bodies allowing a userspace update
+	 * before the hardware has committed a previous set of tables, handling
+	 * both the queued and pending dl entries. One extra entry is added to
+	 * the CLU_SIZE to allow for the VI6_CLU_ADDR header.
+	 */
+	clu->pool = vsp1_dl_body_pool_create(clu->entity.vsp1, 3, CLU_SIZE + 1,
+					     0);
+	if (!clu->pool)
+		return ERR_PTR(-ENOMEM);
+
+	/* Initialize the control handler. */
+	v4l2_ctrl_handler_init(&clu->ctrls, 2);
+	v4l2_ctrl_new_custom(&clu->ctrls, &clu_table_control, NULL);
+	v4l2_ctrl_new_custom(&clu->ctrls, &clu_mode_control, NULL);
+
+	clu->entity.subdev.ctrl_handler = &clu->ctrls;
+
+	if (clu->ctrls.error) {
+		dev_err(vsp1->dev, "clu: failed to initialize controls\n");
+		ret = clu->ctrls.error;
+		vsp1_entity_destroy(&clu->entity);
+		return ERR_PTR(ret);
+	}
+
+	v4l2_ctrl_handler_setup(&clu->ctrls);
+
+	return clu;
+}