Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 429 insertions, 0 deletions

diff --git a/drivers/media/platform/renesas/vsp1/vsp1_uds.c b/drivers/media/platform/renesas/vsp1/vsp1_uds.c
new file mode 100644
index 000000000..1c290cda0
--- /dev/null
+++ b/drivers/media/platform/renesas/vsp1/vsp1_uds.c
@@ -0,0 +1,429 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * vsp1_uds.c  --  R-Car VSP1 Up and Down Scaler
+ *
+ * Copyright (C) 2013-2014 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#include <linux/device.h>
+#include <linux/gfp.h>
+
+#include <media/v4l2-subdev.h>
+
+#include "vsp1.h"
+#include "vsp1_dl.h"
+#include "vsp1_pipe.h"
+#include "vsp1_uds.h"
+
+#define UDS_MIN_SIZE				4U
+#define UDS_MAX_SIZE				8190U
+
+#define UDS_MIN_FACTOR				0x0100
+#define UDS_MAX_FACTOR				0xffff
+
+/* -----------------------------------------------------------------------------
+ * Device Access
+ */
+
+static inline void vsp1_uds_write(struct vsp1_uds *uds,
+				  struct vsp1_dl_body *dlb, u32 reg, u32 data)
+{
+	vsp1_dl_body_write(dlb, reg + uds->entity.index * VI6_UDS_OFFSET, data);
+}
+
+/* -----------------------------------------------------------------------------
+ * Scaling Computation
+ */
+
+void vsp1_uds_set_alpha(struct vsp1_entity *entity, struct vsp1_dl_body *dlb,
+			unsigned int alpha)
+{
+	struct vsp1_uds *uds = to_uds(&entity->subdev);
+
+	vsp1_uds_write(uds, dlb, VI6_UDS_ALPVAL,
+		       alpha << VI6_UDS_ALPVAL_VAL0_SHIFT);
+}
+
+/*
+ * uds_output_size - Return the output size for an input size and scaling ratio
+ * @input: input size in pixels
+ * @ratio: scaling ratio in U4.12 fixed-point format
+ */
+static unsigned int uds_output_size(unsigned int input, unsigned int ratio)
+{
+	if (ratio > 4096) {
+		/* Down-scaling */
+		unsigned int mp;
+
+		mp = ratio / 4096;
+		mp = mp < 4 ? 1 : (mp < 8 ? 2 : 4);
+
+		return (input - 1) / mp * mp * 4096 / ratio + 1;
+	} else {
+		/* Up-scaling */
+		return (input - 1) * 4096 / ratio + 1;
+	}
+}
+
+/*
+ * uds_output_limits - Return the min and max output sizes for an input size
+ * @input: input size in pixels
+ * @minimum: minimum output size (returned)
+ * @maximum: maximum output size (returned)
+ */
+static void uds_output_limits(unsigned int input,
+			      unsigned int *minimum, unsigned int *maximum)
+{
+	*minimum = max(uds_output_size(input, UDS_MAX_FACTOR), UDS_MIN_SIZE);
+	*maximum = min(uds_output_size(input, UDS_MIN_FACTOR), UDS_MAX_SIZE);
+}
+
+/*
+ * uds_passband_width - Return the passband filter width for a scaling ratio
+ * @ratio: scaling ratio in U4.12 fixed-point format
+ */
+static unsigned int uds_passband_width(unsigned int ratio)
+{
+	if (ratio >= 4096) {
+		/* Down-scaling */
+		unsigned int mp;
+
+		mp = ratio / 4096;
+		mp = mp < 4 ? 1 : (mp < 8 ? 2 : 4);
+
+		return 64 * 4096 * mp / ratio;
+	} else {
+		/* Up-scaling */
+		return 64;
+	}
+}
+
+static unsigned int uds_compute_ratio(unsigned int input, unsigned int output)
+{
+	/* TODO: This is an approximation that will need to be refined. */
+	return (input - 1) * 4096 / (output - 1);
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 Subdevice Pad Operations
+ */
+
+static int uds_enum_mbus_code(struct v4l2_subdev *subdev,
+			      struct v4l2_subdev_state *sd_state,
+			      struct v4l2_subdev_mbus_code_enum *code)
+{
+	static const unsigned int codes[] = {
+		MEDIA_BUS_FMT_ARGB8888_1X32,
+		MEDIA_BUS_FMT_AYUV8_1X32,
+	};
+
+	return vsp1_subdev_enum_mbus_code(subdev, sd_state, code, codes,
+					  ARRAY_SIZE(codes));
+}
+
+static int uds_enum_frame_size(struct v4l2_subdev *subdev,
+			       struct v4l2_subdev_state *sd_state,
+			       struct v4l2_subdev_frame_size_enum *fse)
+{
+	struct vsp1_uds *uds = to_uds(subdev);
+	struct v4l2_subdev_state *config;
+	struct v4l2_mbus_framefmt *format;
+	int ret = 0;
+
+	config = vsp1_entity_get_pad_config(&uds->entity, sd_state,
+					    fse->which);
+	if (!config)
+		return -EINVAL;
+
+	format = vsp1_entity_get_pad_format(&uds->entity, config,
+					    UDS_PAD_SINK);
+
+	mutex_lock(&uds->entity.lock);
+
+	if (fse->index || fse->code != format->code) {
+		ret = -EINVAL;
+		goto done;
+	}
+
+	if (fse->pad == UDS_PAD_SINK) {
+		fse->min_width = UDS_MIN_SIZE;
+		fse->max_width = UDS_MAX_SIZE;
+		fse->min_height = UDS_MIN_SIZE;
+		fse->max_height = UDS_MAX_SIZE;
+	} else {
+		uds_output_limits(format->width, &fse->min_width,
+				  &fse->max_width);
+		uds_output_limits(format->height, &fse->min_height,
+				  &fse->max_height);
+	}
+
+done:
+	mutex_unlock(&uds->entity.lock);
+	return ret;
+}
+
+static void uds_try_format(struct vsp1_uds *uds,
+			   struct v4l2_subdev_state *sd_state,
+			   unsigned int pad, struct v4l2_mbus_framefmt *fmt)
+{
+	struct v4l2_mbus_framefmt *format;
+	unsigned int minimum;
+	unsigned int maximum;
+
+	switch (pad) {
+	case UDS_PAD_SINK:
+		/* Default to YUV if the requested format is not supported. */
+		if (fmt->code != MEDIA_BUS_FMT_ARGB8888_1X32 &&
+		    fmt->code != MEDIA_BUS_FMT_AYUV8_1X32)
+			fmt->code = MEDIA_BUS_FMT_AYUV8_1X32;
+
+		fmt->width = clamp(fmt->width, UDS_MIN_SIZE, UDS_MAX_SIZE);
+		fmt->height = clamp(fmt->height, UDS_MIN_SIZE, UDS_MAX_SIZE);
+		break;
+
+	case UDS_PAD_SOURCE:
+		/* The UDS scales but can't perform format conversion. */
+		format = vsp1_entity_get_pad_format(&uds->entity, sd_state,
+						    UDS_PAD_SINK);
+		fmt->code = format->code;
+
+		uds_output_limits(format->width, &minimum, &maximum);
+		fmt->width = clamp(fmt->width, minimum, maximum);
+		uds_output_limits(format->height, &minimum, &maximum);
+		fmt->height = clamp(fmt->height, minimum, maximum);
+		break;
+	}
+
+	fmt->field = V4L2_FIELD_NONE;
+	fmt->colorspace = V4L2_COLORSPACE_SRGB;
+}
+
+static int uds_set_format(struct v4l2_subdev *subdev,
+			  struct v4l2_subdev_state *sd_state,
+			  struct v4l2_subdev_format *fmt)
+{
+	struct vsp1_uds *uds = to_uds(subdev);
+	struct v4l2_subdev_state *config;
+	struct v4l2_mbus_framefmt *format;
+	int ret = 0;
+
+	mutex_lock(&uds->entity.lock);
+
+	config = vsp1_entity_get_pad_config(&uds->entity, sd_state,
+					    fmt->which);
+	if (!config) {
+		ret = -EINVAL;
+		goto done;
+	}
+
+	uds_try_format(uds, config, fmt->pad, &fmt->format);
+
+	format = vsp1_entity_get_pad_format(&uds->entity, config, fmt->pad);
+	*format = fmt->format;
+
+	if (fmt->pad == UDS_PAD_SINK) {
+		/* Propagate the format to the source pad. */
+		format = vsp1_entity_get_pad_format(&uds->entity, config,
+						    UDS_PAD_SOURCE);
+		*format = fmt->format;
+
+		uds_try_format(uds, config, UDS_PAD_SOURCE, format);
+	}
+
+done:
+	mutex_unlock(&uds->entity.lock);
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 Subdevice Operations
+ */
+
+static const struct v4l2_subdev_pad_ops uds_pad_ops = {
+	.init_cfg = vsp1_entity_init_cfg,
+	.enum_mbus_code = uds_enum_mbus_code,
+	.enum_frame_size = uds_enum_frame_size,
+	.get_fmt = vsp1_subdev_get_pad_format,
+	.set_fmt = uds_set_format,
+};
+
+static const struct v4l2_subdev_ops uds_ops = {
+	.pad    = &uds_pad_ops,
+};
+
+/* -----------------------------------------------------------------------------
+ * VSP1 Entity Operations
+ */
+
+static void uds_configure_stream(struct vsp1_entity *entity,
+				 struct vsp1_pipeline *pipe,
+				 struct vsp1_dl_list *dl,
+				 struct vsp1_dl_body *dlb)
+{
+	struct vsp1_uds *uds = to_uds(&entity->subdev);
+	const struct v4l2_mbus_framefmt *output;
+	const struct v4l2_mbus_framefmt *input;
+	unsigned int hscale;
+	unsigned int vscale;
+	bool multitap;
+
+	input = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config,
+					   UDS_PAD_SINK);
+	output = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config,
+					    UDS_PAD_SOURCE);
+
+	hscale = uds_compute_ratio(input->width, output->width);
+	vscale = uds_compute_ratio(input->height, output->height);
+
+	dev_dbg(uds->entity.vsp1->dev, "hscale %u vscale %u\n", hscale, vscale);
+
+	/*
+	 * Multi-tap scaling can't be enabled along with alpha scaling when
+	 * scaling down with a factor lower than or equal to 1/2 in either
+	 * direction.
+	 */
+	if (uds->scale_alpha && (hscale >= 8192 || vscale >= 8192))
+		multitap = false;
+	else
+		multitap = true;
+
+	vsp1_uds_write(uds, dlb, VI6_UDS_CTRL,
+		       (uds->scale_alpha ? VI6_UDS_CTRL_AON : 0) |
+		       (multitap ? VI6_UDS_CTRL_BC : 0));
+
+	vsp1_uds_write(uds, dlb, VI6_UDS_PASS_BWIDTH,
+		       (uds_passband_width(hscale)
+				<< VI6_UDS_PASS_BWIDTH_H_SHIFT) |
+		       (uds_passband_width(vscale)
+				<< VI6_UDS_PASS_BWIDTH_V_SHIFT));
+
+	/* Set the scaling ratios. */
+	vsp1_uds_write(uds, dlb, VI6_UDS_SCALE,
+		       (hscale << VI6_UDS_SCALE_HFRAC_SHIFT) |
+		       (vscale << VI6_UDS_SCALE_VFRAC_SHIFT));
+}
+
+static void uds_configure_partition(struct vsp1_entity *entity,
+				    struct vsp1_pipeline *pipe,
+				    struct vsp1_dl_list *dl,
+				    struct vsp1_dl_body *dlb)
+{
+	struct vsp1_uds *uds = to_uds(&entity->subdev);
+	struct vsp1_partition *partition = pipe->partition;
+	const struct v4l2_mbus_framefmt *output;
+
+	output = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config,
+					    UDS_PAD_SOURCE);
+
+	/* Input size clipping. */
+	vsp1_uds_write(uds, dlb, VI6_UDS_HSZCLIP, VI6_UDS_HSZCLIP_HCEN |
+		       (0 << VI6_UDS_HSZCLIP_HCL_OFST_SHIFT) |
+		       (partition->uds_sink.width
+				<< VI6_UDS_HSZCLIP_HCL_SIZE_SHIFT));
+
+	/* Output size clipping. */
+	vsp1_uds_write(uds, dlb, VI6_UDS_CLIP_SIZE,
+		       (partition->uds_source.width
+				<< VI6_UDS_CLIP_SIZE_HSIZE_SHIFT) |
+		       (output->height
+				<< VI6_UDS_CLIP_SIZE_VSIZE_SHIFT));
+}
+
+static unsigned int uds_max_width(struct vsp1_entity *entity,
+				  struct vsp1_pipeline *pipe)
+{
+	struct vsp1_uds *uds = to_uds(&entity->subdev);
+	const struct v4l2_mbus_framefmt *output;
+	const struct v4l2_mbus_framefmt *input;
+	unsigned int hscale;
+
+	input = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config,
+					   UDS_PAD_SINK);
+	output = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config,
+					    UDS_PAD_SOURCE);
+	hscale = output->width / input->width;
+
+	/*
+	 * The maximum width of the UDS is 304 pixels. These are input pixels
+	 * in the event of up-scaling, and output pixels in the event of
+	 * downscaling.
+	 *
+	 * To support overlapping partition windows we clamp at units of 256 and
+	 * the remaining pixels are reserved.
+	 */
+	if (hscale <= 2)
+		return 256;
+	else if (hscale <= 4)
+		return 512;
+	else if (hscale <= 8)
+		return 1024;
+	else
+		return 2048;
+}
+
+/* -----------------------------------------------------------------------------
+ * Partition Algorithm Support
+ */
+
+static void uds_partition(struct vsp1_entity *entity,
+			  struct vsp1_pipeline *pipe,
+			  struct vsp1_partition *partition,
+			  unsigned int partition_idx,
+			  struct vsp1_partition_window *window)
+{
+	struct vsp1_uds *uds = to_uds(&entity->subdev);
+	const struct v4l2_mbus_framefmt *output;
+	const struct v4l2_mbus_framefmt *input;
+
+	/* Initialise the partition state. */
+	partition->uds_sink = *window;
+	partition->uds_source = *window;
+
+	input = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config,
+					   UDS_PAD_SINK);
+	output = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config,
+					    UDS_PAD_SOURCE);
+
+	partition->uds_sink.width = window->width * input->width
+				  / output->width;
+	partition->uds_sink.left = window->left * input->width
+				 / output->width;
+
+	*window = partition->uds_sink;
+}
+
+static const struct vsp1_entity_operations uds_entity_ops = {
+	.configure_stream = uds_configure_stream,
+	.configure_partition = uds_configure_partition,
+	.max_width = uds_max_width,
+	.partition = uds_partition,
+};
+
+/* -----------------------------------------------------------------------------
+ * Initialization and Cleanup
+ */
+
+struct vsp1_uds *vsp1_uds_create(struct vsp1_device *vsp1, unsigned int index)
+{
+	struct vsp1_uds *uds;
+	char name[6];
+	int ret;
+
+	uds = devm_kzalloc(vsp1->dev, sizeof(*uds), GFP_KERNEL);
+	if (uds == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	uds->entity.ops = &uds_entity_ops;
+	uds->entity.type = VSP1_ENTITY_UDS;
+	uds->entity.index = index;
+
+	sprintf(name, "uds.%u", index);
+	ret = vsp1_entity_init(vsp1, &uds->entity, name, 2, &uds_ops,
+			       MEDIA_ENT_F_PROC_VIDEO_SCALER);
+	if (ret < 0)
+		return ERR_PTR(ret);
+
+	return uds;
+}