Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 224 insertions, 0 deletions

diff --git a/drivers/media/platform/samsung/exynos4-is/fimc-lite.h b/drivers/media/platform/samsung/exynos4-is/fimc-lite.h
new file mode 100644
index 000000000..ddf29e0b5
--- /dev/null
+++ b/drivers/media/platform/samsung/exynos4-is/fimc-lite.h
@@ -0,0 +1,224 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ */
+
+#ifndef FIMC_LITE_H_
+#define FIMC_LITE_H_
+
+#include <linux/sizes.h>
+#include <linux/io.h>
+#include <linux/irqreturn.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/videodev2.h>
+
+#include <media/media-entity.h>
+#include <media/videobuf2-v4l2.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-mediabus.h>
+#include <media/drv-intf/exynos-fimc.h>
+
+#define FIMC_LITE_DRV_NAME	"exynos-fimc-lite"
+#define FLITE_CLK_NAME		"flite"
+#define FIMC_LITE_MAX_DEVS	3
+#define FLITE_REQ_BUFS_MIN	2
+#define FLITE_DEFAULT_WIDTH	640
+#define FLITE_DEFAULT_HEIGHT	480
+
+/* Bit index definitions for struct fimc_lite::state */
+enum {
+	ST_FLITE_LPM,
+	ST_FLITE_PENDING,
+	ST_FLITE_RUN,
+	ST_FLITE_STREAM,
+	ST_FLITE_SUSPENDED,
+	ST_FLITE_OFF,
+	ST_FLITE_IN_USE,
+	ST_FLITE_CONFIG,
+	ST_SENSOR_STREAM,
+};
+
+#define FLITE_SD_PAD_SINK	0
+#define FLITE_SD_PAD_SOURCE_DMA	1
+#define FLITE_SD_PAD_SOURCE_ISP	2
+#define FLITE_SD_PADS_NUM	3
+
+/**
+ * struct flite_drvdata - FIMC-LITE IP variant data structure
+ * @max_width: maximum camera interface input width in pixels
+ * @max_height: maximum camera interface input height in pixels
+ * @out_width_align: minimum output width alignment in pixels
+ * @win_hor_offs_align: minimum camera interface crop window horizontal
+ *			offset alignment in pixels
+ * @out_hor_offs_align: minimum output DMA compose rectangle horizontal
+ *			offset alignment in pixels
+ * @max_dma_bufs: number of output DMA buffer start address registers
+ * @num_instances: total number of FIMC-LITE IP instances available
+ */
+struct flite_drvdata {
+	unsigned short max_width;
+	unsigned short max_height;
+	unsigned short out_width_align;
+	unsigned short win_hor_offs_align;
+	unsigned short out_hor_offs_align;
+	unsigned short max_dma_bufs;
+	unsigned short num_instances;
+};
+
+struct fimc_lite_events {
+	unsigned int data_overflow;
+};
+
+#define FLITE_MAX_PLANES	1
+
+/**
+ * struct flite_frame - source/target frame properties
+ * @f_width: full pixel width
+ * @f_height: full pixel height
+ * @rect: crop/composition rectangle
+ * @fmt: pointer to pixel format description data structure
+ */
+struct flite_frame {
+	u16 f_width;
+	u16 f_height;
+	struct v4l2_rect rect;
+	const struct fimc_fmt *fmt;
+};
+
+/**
+ * struct flite_buffer - video buffer structure
+ * @vb:    vb2 buffer
+ * @list:  list head for the buffers queue
+ * @addr: DMA buffer start address
+ * @index: DMA start address register's index
+ */
+struct flite_buffer {
+	struct vb2_v4l2_buffer vb;
+	struct list_head list;
+	dma_addr_t addr;
+	unsigned short index;
+};
+
+/**
+ * struct fimc_lite - fimc lite structure
+ * @pdev: pointer to FIMC-LITE platform device
+ * @dd: SoC specific driver data structure
+ * @ve: exynos video device entity structure
+ * @v4l2_dev: pointer to top the level v4l2_device
+ * @fh: v4l2 file handle
+ * @subdev: FIMC-LITE subdev
+ * @vd_pad: media (sink) pad for the capture video node
+ * @subdev_pads: the subdev media pads
+ * @sensor: sensor subdev attached to FIMC-LITE directly or through MIPI-CSIS
+ * @ctrl_handler: v4l2 control handler
+ * @test_pattern: test pattern controls
+ * @index: FIMC-LITE platform device index
+ * @pipeline: video capture pipeline data structure
+ * @pipeline_ops: media pipeline ops for the video node driver
+ * @slock: spinlock protecting this data structure and the hw registers
+ * @lock: mutex serializing video device and the subdev operations
+ * @clock: FIMC-LITE gate clock
+ * @regs: memory mapped io registers
+ * @irq_queue: interrupt handler waitqueue
+ * @payload: image size in bytes (w x h x bpp)
+ * @inp_frame: camera input frame structure
+ * @out_frame: DMA output frame structure
+ * @out_path: output data path (DMA or FIFO)
+ * @source_subdev_grp_id: source subdev group id
+ * @state: driver state flags
+ * @pending_buf_q: pending buffers queue head
+ * @active_buf_q: the queue head of buffers scheduled in hardware
+ * @vb_queue: vb2 buffers queue
+ * @buf_index: helps to keep track of the DMA start address register index
+ * @active_buf_count: number of video buffers scheduled in hardware
+ * @frame_count: the captured frames counter
+ * @reqbufs_count: the number of buffers requested with REQBUFS ioctl
+ * @events: event info
+ * @streaming: is streaming in progress?
+ */
+struct fimc_lite {
+	struct platform_device	*pdev;
+	struct flite_drvdata	*dd;
+	struct exynos_video_entity ve;
+	struct v4l2_device	*v4l2_dev;
+	struct v4l2_fh		fh;
+	struct v4l2_subdev	subdev;
+	struct media_pad	vd_pad;
+	struct media_pad	subdev_pads[FLITE_SD_PADS_NUM];
+	struct v4l2_subdev	*sensor;
+	struct v4l2_ctrl_handler ctrl_handler;
+	struct v4l2_ctrl	*test_pattern;
+	int			index;
+
+	struct mutex		lock;
+	spinlock_t		slock;
+
+	struct clk		*clock;
+	void __iomem		*regs;
+	wait_queue_head_t	irq_queue;
+
+	unsigned long		payload[FLITE_MAX_PLANES];
+	struct flite_frame	inp_frame;
+	struct flite_frame	out_frame;
+	atomic_t		out_path;
+	unsigned int		source_subdev_grp_id;
+
+	unsigned long		state;
+	struct list_head	pending_buf_q;
+	struct list_head	active_buf_q;
+	struct vb2_queue	vb_queue;
+	unsigned short		buf_index;
+	unsigned int		frame_count;
+	unsigned int		reqbufs_count;
+
+	struct fimc_lite_events	events;
+	bool			streaming;
+};
+
+static inline bool fimc_lite_active(struct fimc_lite *fimc)
+{
+	unsigned long flags;
+	bool ret;
+
+	spin_lock_irqsave(&fimc->slock, flags);
+	ret = fimc->state & (1 << ST_FLITE_RUN) ||
+		fimc->state & (1 << ST_FLITE_PENDING);
+	spin_unlock_irqrestore(&fimc->slock, flags);
+	return ret;
+}
+
+static inline void fimc_lite_active_queue_add(struct fimc_lite *dev,
+					 struct flite_buffer *buf)
+{
+	list_add_tail(&buf->list, &dev->active_buf_q);
+}
+
+static inline struct flite_buffer *fimc_lite_active_queue_pop(
+					struct fimc_lite *dev)
+{
+	struct flite_buffer *buf = list_entry(dev->active_buf_q.next,
+					      struct flite_buffer, list);
+	list_del(&buf->list);
+	return buf;
+}
+
+static inline void fimc_lite_pending_queue_add(struct fimc_lite *dev,
+					struct flite_buffer *buf)
+{
+	list_add_tail(&buf->list, &dev->pending_buf_q);
+}
+
+static inline struct flite_buffer *fimc_lite_pending_queue_pop(
+					struct fimc_lite *dev)
+{
+	struct flite_buffer *buf = list_entry(dev->pending_buf_q.next,
+					      struct flite_buffer, list);
+	list_del(&buf->list);
+	return buf;
+}
+
+#endif /* FIMC_LITE_H_ */