Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 235 insertions, 0 deletions

diff --git a/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-dvb.c b/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-dvb.c
new file mode 100644
index 000000000..feb48cb54
--- /dev/null
+++ b/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-dvb.c
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  c8sectpfe-dvb.c - C8SECTPFE STi DVB driver
+ *
+ * Copyright (c) STMicroelectronics 2015
+ *
+ *  Author Peter Griffin <peter.griffin@linaro.org>
+ *
+ */
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+
+#include <dt-bindings/media/c8sectpfe.h>
+
+#include "c8sectpfe-common.h"
+#include "c8sectpfe-core.h"
+#include "c8sectpfe-dvb.h"
+
+#include "dvb-pll.h"
+#include "lnbh24.h"
+#include "stv0367.h"
+#include "stv0367_priv.h"
+#include "stv6110x.h"
+#include "stv090x.h"
+#include "tda18212.h"
+
+static inline const char *dvb_card_str(unsigned int c)
+{
+	switch (c) {
+	case STV0367_TDA18212_NIMA_1:	return "STV0367_TDA18212_NIMA_1";
+	case STV0367_TDA18212_NIMA_2:	return "STV0367_TDA18212_NIMA_2";
+	case STV0367_TDA18212_NIMB_1:	return "STV0367_TDA18212_NIMB_1";
+	case STV0367_TDA18212_NIMB_2:	return "STV0367_TDA18212_NIMB_2";
+	case STV0903_6110_LNB24_NIMA:	return "STV0903_6110_LNB24_NIMA";
+	case STV0903_6110_LNB24_NIMB:	return "STV0903_6110_LNB24_NIMB";
+	default:			return "unknown dvb frontend card";
+	}
+}
+
+static struct stv090x_config stv090x_config = {
+	.device                 = STV0903,
+	.demod_mode             = STV090x_SINGLE,
+	.clk_mode               = STV090x_CLK_EXT,
+	.xtal                   = 16000000,
+	.address                = 0x69,
+
+	.ts1_mode               = STV090x_TSMODE_SERIAL_CONTINUOUS,
+	.ts2_mode               = STV090x_TSMODE_SERIAL_CONTINUOUS,
+
+	.repeater_level         = STV090x_RPTLEVEL_64,
+
+	.tuner_init             = NULL,
+	.tuner_set_mode         = NULL,
+	.tuner_set_frequency    = NULL,
+	.tuner_get_frequency    = NULL,
+	.tuner_set_bandwidth    = NULL,
+	.tuner_get_bandwidth    = NULL,
+	.tuner_set_bbgain       = NULL,
+	.tuner_get_bbgain       = NULL,
+	.tuner_set_refclk       = NULL,
+	.tuner_get_status       = NULL,
+};
+
+static struct stv6110x_config stv6110x_config = {
+	.addr                   = 0x60,
+	.refclk                 = 16000000,
+};
+
+#define NIMA 0
+#define NIMB 1
+
+static struct stv0367_config stv0367_tda18212_config[] = {
+	{
+		.demod_address = 0x1c,
+		.xtal = 16000000,
+		.if_khz = 4500,
+		.if_iq_mode = FE_TER_NORMAL_IF_TUNER,
+		.ts_mode = STV0367_SERIAL_PUNCT_CLOCK,
+		.clk_pol = STV0367_CLOCKPOLARITY_DEFAULT,
+	}, {
+		.demod_address = 0x1d,
+		.xtal = 16000000,
+		.if_khz = 4500,
+		.if_iq_mode = FE_TER_NORMAL_IF_TUNER,
+		.ts_mode = STV0367_SERIAL_PUNCT_CLOCK,
+		.clk_pol = STV0367_CLOCKPOLARITY_DEFAULT,
+	}, {
+		.demod_address = 0x1e,
+		.xtal = 16000000,
+		.if_khz = 4500,
+		.if_iq_mode = FE_TER_NORMAL_IF_TUNER,
+		.ts_mode = STV0367_SERIAL_PUNCT_CLOCK,
+		.clk_pol = STV0367_CLOCKPOLARITY_DEFAULT,
+	},
+};
+
+static struct tda18212_config tda18212_conf = {
+	.if_dvbt_6 = 4150,
+	.if_dvbt_7 = 4150,
+	.if_dvbt_8 = 4500,
+	.if_dvbc = 5000,
+};
+
+int c8sectpfe_frontend_attach(struct dvb_frontend **fe,
+		struct c8sectpfe *c8sectpfe,
+		struct channel_info *tsin, int chan_num)
+{
+	struct tda18212_config *tda18212;
+	const struct stv6110x_devctl *fe2;
+	struct i2c_client *client;
+	struct i2c_board_info tda18212_info = {
+		.type = "tda18212",
+		.addr = 0x60,
+	};
+
+	if (!tsin)
+		return -EINVAL;
+
+	switch (tsin->dvb_card) {
+
+	case STV0367_TDA18212_NIMA_1:
+	case STV0367_TDA18212_NIMA_2:
+	case STV0367_TDA18212_NIMB_1:
+	case STV0367_TDA18212_NIMB_2:
+		if (tsin->dvb_card == STV0367_TDA18212_NIMA_1)
+			*fe = dvb_attach(stv0367ter_attach,
+				 &stv0367_tda18212_config[0],
+					tsin->i2c_adapter);
+		else if (tsin->dvb_card == STV0367_TDA18212_NIMB_1)
+			*fe = dvb_attach(stv0367ter_attach,
+				 &stv0367_tda18212_config[1],
+					tsin->i2c_adapter);
+		else
+			*fe = dvb_attach(stv0367ter_attach,
+				 &stv0367_tda18212_config[2],
+					tsin->i2c_adapter);
+
+		if (!*fe) {
+			dev_err(c8sectpfe->device,
+				"%s: stv0367ter_attach failed for NIM card %s\n"
+				, __func__, dvb_card_str(tsin->dvb_card));
+			return -ENODEV;
+		}
+
+		/*
+		 * init the demod so that i2c gate_ctrl
+		 * to the tuner works correctly
+		 */
+		(*fe)->ops.init(*fe);
+
+		/* Allocate the tda18212 structure */
+		tda18212 = devm_kzalloc(c8sectpfe->device,
+					sizeof(struct tda18212_config),
+					GFP_KERNEL);
+		if (!tda18212) {
+			dev_err(c8sectpfe->device,
+				"%s: devm_kzalloc failed\n", __func__);
+			return -ENOMEM;
+		}
+
+		memcpy(tda18212, &tda18212_conf,
+			sizeof(struct tda18212_config));
+
+		tda18212->fe = (*fe);
+
+		tda18212_info.platform_data = tda18212;
+
+		/* attach tuner */
+		request_module("tda18212");
+		client = i2c_new_client_device(tsin->i2c_adapter,
+					       &tda18212_info);
+		if (!i2c_client_has_driver(client)) {
+			dvb_frontend_detach(*fe);
+			return -ENODEV;
+		}
+
+		if (!try_module_get(client->dev.driver->owner)) {
+			i2c_unregister_device(client);
+			dvb_frontend_detach(*fe);
+			return -ENODEV;
+		}
+
+		tsin->i2c_client = client;
+
+		break;
+
+	case STV0903_6110_LNB24_NIMA:
+		*fe = dvb_attach(stv090x_attach,	&stv090x_config,
+				tsin->i2c_adapter, STV090x_DEMODULATOR_0);
+		if (!*fe) {
+			dev_err(c8sectpfe->device, "%s: stv090x_attach failed\n"
+				"\tfor NIM card %s\n",
+				__func__, dvb_card_str(tsin->dvb_card));
+			return -ENODEV;
+		}
+
+		fe2 = dvb_attach(stv6110x_attach, *fe,
+					&stv6110x_config, tsin->i2c_adapter);
+		if (!fe2) {
+			dev_err(c8sectpfe->device,
+				"%s: stv6110x_attach failed for NIM card %s\n"
+				, __func__, dvb_card_str(tsin->dvb_card));
+			return -ENODEV;
+		}
+
+		stv090x_config.tuner_init = fe2->tuner_init;
+		stv090x_config.tuner_set_mode = fe2->tuner_set_mode;
+		stv090x_config.tuner_set_frequency = fe2->tuner_set_frequency;
+		stv090x_config.tuner_get_frequency = fe2->tuner_get_frequency;
+		stv090x_config.tuner_set_bandwidth = fe2->tuner_set_bandwidth;
+		stv090x_config.tuner_get_bandwidth = fe2->tuner_get_bandwidth;
+		stv090x_config.tuner_set_bbgain = fe2->tuner_set_bbgain;
+		stv090x_config.tuner_get_bbgain = fe2->tuner_get_bbgain;
+		stv090x_config.tuner_set_refclk = fe2->tuner_set_refclk;
+		stv090x_config.tuner_get_status = fe2->tuner_get_status;
+
+		dvb_attach(lnbh24_attach, *fe, tsin->i2c_adapter, 0, 0, 0x9);
+		break;
+
+	default:
+		dev_err(c8sectpfe->device,
+			"%s: DVB frontend card %s not yet supported\n",
+			__func__, dvb_card_str(tsin->dvb_card));
+		return -ENODEV;
+	}
+
+	(*fe)->id = chan_num;
+
+	dev_info(c8sectpfe->device,
+			"DVB frontend card %s successfully attached",
+			dvb_card_str(tsin->dvb_card));
+	return 0;
+}