Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 219 insertions, 0 deletions

diff --git a/drivers/media/platform/ti/omap/omap_voutdef.h b/drivers/media/platform/ti/omap/omap_voutdef.h
new file mode 100644
index 000000000..b58619334
--- /dev/null
+++ b/drivers/media/platform/ti/omap/omap_voutdef.h
@@ -0,0 +1,219 @@
+/*
+ * omap_voutdef.h
+ *
+ * Copyright (C) 2010 Texas Instruments.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef OMAP_VOUTDEF_H
+#define OMAP_VOUTDEF_H
+
+#include <media/videobuf2-dma-contig.h>
+#include <media/v4l2-ctrls.h>
+#include <video/omapfb_dss.h>
+#include <video/omapvrfb.h>
+#include <linux/dmaengine.h>
+
+#define YUYV_BPP        2
+#define RGB565_BPP      2
+#define RGB24_BPP       3
+#define RGB32_BPP       4
+#define TILE_SIZE       32
+#define YUYV_VRFB_BPP   2
+#define RGB_VRFB_BPP    1
+#define MAX_CID		3
+#define MAC_VRFB_CTXS	4
+#define MAX_VOUT_DEV	2
+#define MAX_OVLS	3
+#define MAX_DISPLAYS	10
+#define MAX_MANAGERS	3
+
+#define QQVGA_WIDTH		160
+#define QQVGA_HEIGHT		120
+
+/* Max Resolution supported by the driver */
+#define VID_MAX_WIDTH		1280	/* Largest width */
+#define VID_MAX_HEIGHT		720	/* Largest height */
+
+/* Minimum requirement is 2x2 for DSS */
+#define VID_MIN_WIDTH		2
+#define VID_MIN_HEIGHT		2
+
+/* 2048 x 2048 is max res supported by OMAP display controller */
+#define MAX_PIXELS_PER_LINE     2048
+
+#define VRFB_TX_TIMEOUT         1000
+#define VRFB_NUM_BUFS		4
+
+/* Max buffer size tobe allocated during init */
+#define OMAP_VOUT_MAX_BUF_SIZE (VID_MAX_WIDTH*VID_MAX_HEIGHT*4)
+
+enum dma_channel_state {
+	DMA_CHAN_NOT_ALLOTED,
+	DMA_CHAN_ALLOTED,
+};
+
+/* Enum for Rotation
+ * DSS understands rotation in 0, 1, 2, 3 context
+ * while V4L2 driver understands it as 0, 90, 180, 270
+ */
+enum dss_rotation {
+	dss_rotation_0_degree	= 0,
+	dss_rotation_90_degree	= 1,
+	dss_rotation_180_degree	= 2,
+	dss_rotation_270_degree = 3,
+};
+
+/* Enum for choosing rotation type for vout
+ * DSS2 doesn't understand no rotation as an
+ * option while V4L2 driver doesn't support
+ * rotation in the case where VRFB is not built in
+ * the kernel
+ */
+enum vout_rotaion_type {
+	VOUT_ROT_NONE	= 0,
+	VOUT_ROT_VRFB	= 1,
+};
+
+/*
+ * This structure is used to store the DMA transfer parameters
+ * for VRFB hidden buffer
+ */
+struct vid_vrfb_dma {
+	struct dma_chan *chan;
+	struct dma_interleaved_template *xt;
+
+	int req_status;
+	int tx_status;
+	wait_queue_head_t wait;
+};
+
+struct omapvideo_info {
+	int id;
+	int num_overlays;
+	struct omap_overlay *overlays[MAX_OVLS];
+	enum vout_rotaion_type rotation_type;
+};
+
+struct omap2video_device {
+	struct mutex  mtx;
+
+	int state;
+
+	struct v4l2_device v4l2_dev;
+	struct omap_vout_device *vouts[MAX_VOUT_DEV];
+
+	int num_displays;
+	struct omap_dss_device *displays[MAX_DISPLAYS];
+	int num_overlays;
+	struct omap_overlay *overlays[MAX_OVLS];
+	int num_managers;
+	struct omap_overlay_manager *managers[MAX_MANAGERS];
+};
+
+/* buffer for one video frame */
+struct omap_vout_buffer {
+	/* common v4l buffer stuff -- must be first */
+	struct vb2_v4l2_buffer		vbuf;
+	struct list_head		queue;
+};
+
+static inline struct omap_vout_buffer *vb2_to_omap_vout_buffer(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+
+	return container_of(vbuf, struct omap_vout_buffer, vbuf);
+}
+
+/* per-device data structure */
+struct omap_vout_device {
+
+	struct omapvideo_info vid_info;
+	struct video_device *vfd;
+	struct omap2video_device *vid_dev;
+	struct v4l2_ctrl_handler ctrl_handler;
+	int vid;
+
+	/* allow to reuse previously allocated buffer which is big enough */
+	int buffer_size;
+	enum omap_color_mode dss_mode;
+
+	u32 sequence;
+
+	struct v4l2_pix_format pix;
+	struct v4l2_rect crop;
+	struct v4l2_window win;
+	struct v4l2_framebuffer fbuf;
+
+	/* Lock to protect the shared data structures in ioctl */
+	struct mutex lock;
+
+	enum dss_rotation rotation;
+	bool mirror;
+	int flicker_filter;
+
+	int bpp; /* bytes per pixel */
+	int vrfb_bpp; /* bytes per pixel with respect to VRFB */
+
+	struct vid_vrfb_dma vrfb_dma_tx;
+	unsigned int smsshado_phy_addr[MAC_VRFB_CTXS];
+	unsigned int smsshado_virt_addr[MAC_VRFB_CTXS];
+	struct vrfb vrfb_context[MAC_VRFB_CTXS];
+	bool vrfb_static_allocation;
+	unsigned int smsshado_size;
+	unsigned char pos;
+
+	int ps, vr_ps, line_length, first_int, field_id;
+	struct omap_vout_buffer *cur_frm, *next_frm;
+	spinlock_t vbq_lock;            /* spinlock for dma_queue */
+	struct list_head dma_queue;
+	dma_addr_t queued_buf_addr[VIDEO_MAX_FRAME];
+	u32 cropped_offset;
+	s32 tv_field1_offset;
+	void *isr_handle;
+	struct vb2_queue vq;
+
+};
+
+/*
+ * Return true if rotation is 90 or 270
+ */
+static inline int is_rotation_90_or_270(const struct omap_vout_device *vout)
+{
+	return (vout->rotation == dss_rotation_90_degree ||
+			vout->rotation == dss_rotation_270_degree);
+}
+
+/*
+ * Return true if rotation is enabled
+ */
+static inline int is_rotation_enabled(const struct omap_vout_device *vout)
+{
+	return vout->rotation || vout->mirror;
+}
+
+/*
+ * Reverse the rotation degree if mirroring is enabled
+ */
+static inline int calc_rotation(const struct omap_vout_device *vout)
+{
+	if (!vout->mirror)
+		return vout->rotation;
+
+	switch (vout->rotation) {
+	case dss_rotation_90_degree:
+		return dss_rotation_270_degree;
+	case dss_rotation_270_degree:
+		return dss_rotation_90_degree;
+	case dss_rotation_180_degree:
+		return dss_rotation_0_degree;
+	default:
+		return dss_rotation_180_degree;
+	}
+}
+
+void omap_vout_free_buffers(struct omap_vout_device *vout);
+#endif	/* ifndef OMAP_VOUTDEF_H */