Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1176 insertions, 0 deletions

diff --git a/drivers/media/platform/ti/vpe/vpdma.c b/drivers/media/platform/ti/vpe/vpdma.c
new file mode 100644
index 000000000..f8998a8ad
--- /dev/null
+++ b/drivers/media/platform/ti/vpe/vpdma.c
@@ -0,0 +1,1176 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * VPDMA helper library
+ *
+ * Copyright (c) 2013 Texas Instruments Inc.
+ *
+ * David Griego, <dagriego@biglakesoftware.com>
+ * Dale Farnsworth, <dale@farnsworth.org>
+ * Archit Taneja, <archit@ti.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/firmware.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+
+#include "vpdma.h"
+#include "vpdma_priv.h"
+
+#define VPDMA_FIRMWARE	"vpdma-1b8.bin"
+
+const struct vpdma_data_format vpdma_yuv_fmts[] = {
+	[VPDMA_DATA_FMT_Y444] = {
+		.type		= VPDMA_DATA_FMT_TYPE_YUV,
+		.data_type	= DATA_TYPE_Y444,
+		.depth		= 8,
+	},
+	[VPDMA_DATA_FMT_Y422] = {
+		.type		= VPDMA_DATA_FMT_TYPE_YUV,
+		.data_type	= DATA_TYPE_Y422,
+		.depth		= 8,
+	},
+	[VPDMA_DATA_FMT_Y420] = {
+		.type		= VPDMA_DATA_FMT_TYPE_YUV,
+		.data_type	= DATA_TYPE_Y420,
+		.depth		= 8,
+	},
+	[VPDMA_DATA_FMT_C444] = {
+		.type		= VPDMA_DATA_FMT_TYPE_YUV,
+		.data_type	= DATA_TYPE_C444,
+		.depth		= 8,
+	},
+	[VPDMA_DATA_FMT_C422] = {
+		.type		= VPDMA_DATA_FMT_TYPE_YUV,
+		.data_type	= DATA_TYPE_C422,
+		.depth		= 8,
+	},
+	[VPDMA_DATA_FMT_C420] = {
+		.type		= VPDMA_DATA_FMT_TYPE_YUV,
+		.data_type	= DATA_TYPE_C420,
+		.depth		= 4,
+	},
+	[VPDMA_DATA_FMT_CB420] = {
+		.type		= VPDMA_DATA_FMT_TYPE_YUV,
+		.data_type	= DATA_TYPE_CB420,
+		.depth		= 4,
+	},
+	[VPDMA_DATA_FMT_YCR422] = {
+		.type		= VPDMA_DATA_FMT_TYPE_YUV,
+		.data_type	= DATA_TYPE_YCR422,
+		.depth		= 16,
+	},
+	[VPDMA_DATA_FMT_YC444] = {
+		.type		= VPDMA_DATA_FMT_TYPE_YUV,
+		.data_type	= DATA_TYPE_YC444,
+		.depth		= 24,
+	},
+	[VPDMA_DATA_FMT_CRY422] = {
+		.type		= VPDMA_DATA_FMT_TYPE_YUV,
+		.data_type	= DATA_TYPE_CRY422,
+		.depth		= 16,
+	},
+	[VPDMA_DATA_FMT_CBY422] = {
+		.type		= VPDMA_DATA_FMT_TYPE_YUV,
+		.data_type	= DATA_TYPE_CBY422,
+		.depth		= 16,
+	},
+	[VPDMA_DATA_FMT_YCB422] = {
+		.type		= VPDMA_DATA_FMT_TYPE_YUV,
+		.data_type	= DATA_TYPE_YCB422,
+		.depth		= 16,
+	},
+};
+EXPORT_SYMBOL(vpdma_yuv_fmts);
+
+const struct vpdma_data_format vpdma_rgb_fmts[] = {
+	[VPDMA_DATA_FMT_RGB565] = {
+		.type		= VPDMA_DATA_FMT_TYPE_RGB,
+		.data_type	= DATA_TYPE_RGB16_565,
+		.depth		= 16,
+	},
+	[VPDMA_DATA_FMT_ARGB16_1555] = {
+		.type		= VPDMA_DATA_FMT_TYPE_RGB,
+		.data_type	= DATA_TYPE_ARGB_1555,
+		.depth		= 16,
+	},
+	[VPDMA_DATA_FMT_ARGB16] = {
+		.type		= VPDMA_DATA_FMT_TYPE_RGB,
+		.data_type	= DATA_TYPE_ARGB_4444,
+		.depth		= 16,
+	},
+	[VPDMA_DATA_FMT_RGBA16_5551] = {
+		.type		= VPDMA_DATA_FMT_TYPE_RGB,
+		.data_type	= DATA_TYPE_RGBA_5551,
+		.depth		= 16,
+	},
+	[VPDMA_DATA_FMT_RGBA16] = {
+		.type		= VPDMA_DATA_FMT_TYPE_RGB,
+		.data_type	= DATA_TYPE_RGBA_4444,
+		.depth		= 16,
+	},
+	[VPDMA_DATA_FMT_ARGB24] = {
+		.type		= VPDMA_DATA_FMT_TYPE_RGB,
+		.data_type	= DATA_TYPE_ARGB24_6666,
+		.depth		= 24,
+	},
+	[VPDMA_DATA_FMT_RGB24] = {
+		.type		= VPDMA_DATA_FMT_TYPE_RGB,
+		.data_type	= DATA_TYPE_RGB24_888,
+		.depth		= 24,
+	},
+	[VPDMA_DATA_FMT_ARGB32] = {
+		.type		= VPDMA_DATA_FMT_TYPE_RGB,
+		.data_type	= DATA_TYPE_ARGB32_8888,
+		.depth		= 32,
+	},
+	[VPDMA_DATA_FMT_RGBA24] = {
+		.type		= VPDMA_DATA_FMT_TYPE_RGB,
+		.data_type	= DATA_TYPE_RGBA24_6666,
+		.depth		= 24,
+	},
+	[VPDMA_DATA_FMT_RGBA32] = {
+		.type		= VPDMA_DATA_FMT_TYPE_RGB,
+		.data_type	= DATA_TYPE_RGBA32_8888,
+		.depth		= 32,
+	},
+	[VPDMA_DATA_FMT_BGR565] = {
+		.type		= VPDMA_DATA_FMT_TYPE_RGB,
+		.data_type	= DATA_TYPE_BGR16_565,
+		.depth		= 16,
+	},
+	[VPDMA_DATA_FMT_ABGR16_1555] = {
+		.type		= VPDMA_DATA_FMT_TYPE_RGB,
+		.data_type	= DATA_TYPE_ABGR_1555,
+		.depth		= 16,
+	},
+	[VPDMA_DATA_FMT_ABGR16] = {
+		.type		= VPDMA_DATA_FMT_TYPE_RGB,
+		.data_type	= DATA_TYPE_ABGR_4444,
+		.depth		= 16,
+	},
+	[VPDMA_DATA_FMT_BGRA16_5551] = {
+		.type		= VPDMA_DATA_FMT_TYPE_RGB,
+		.data_type	= DATA_TYPE_BGRA_5551,
+		.depth		= 16,
+	},
+	[VPDMA_DATA_FMT_BGRA16] = {
+		.type		= VPDMA_DATA_FMT_TYPE_RGB,
+		.data_type	= DATA_TYPE_BGRA_4444,
+		.depth		= 16,
+	},
+	[VPDMA_DATA_FMT_ABGR24] = {
+		.type		= VPDMA_DATA_FMT_TYPE_RGB,
+		.data_type	= DATA_TYPE_ABGR24_6666,
+		.depth		= 24,
+	},
+	[VPDMA_DATA_FMT_BGR24] = {
+		.type		= VPDMA_DATA_FMT_TYPE_RGB,
+		.data_type	= DATA_TYPE_BGR24_888,
+		.depth		= 24,
+	},
+	[VPDMA_DATA_FMT_ABGR32] = {
+		.type		= VPDMA_DATA_FMT_TYPE_RGB,
+		.data_type	= DATA_TYPE_ABGR32_8888,
+		.depth		= 32,
+	},
+	[VPDMA_DATA_FMT_BGRA24] = {
+		.type		= VPDMA_DATA_FMT_TYPE_RGB,
+		.data_type	= DATA_TYPE_BGRA24_6666,
+		.depth		= 24,
+	},
+	[VPDMA_DATA_FMT_BGRA32] = {
+		.type		= VPDMA_DATA_FMT_TYPE_RGB,
+		.data_type	= DATA_TYPE_BGRA32_8888,
+		.depth		= 32,
+	},
+};
+EXPORT_SYMBOL(vpdma_rgb_fmts);
+
+/*
+ * To handle RAW format we are re-using the CBY422
+ * vpdma data type so that we use the vpdma to re-order
+ * the incoming bytes, as the parser assumes that the
+ * first byte presented on the bus is the MSB of a 2
+ * bytes value.
+ * RAW8 handles from 1 to 8 bits
+ * RAW16 handles from 9 to 16 bits
+ */
+const struct vpdma_data_format vpdma_raw_fmts[] = {
+	[VPDMA_DATA_FMT_RAW8] = {
+		.type		= VPDMA_DATA_FMT_TYPE_YUV,
+		.data_type	= DATA_TYPE_CBY422,
+		.depth		= 8,
+	},
+	[VPDMA_DATA_FMT_RAW16] = {
+		.type		= VPDMA_DATA_FMT_TYPE_YUV,
+		.data_type	= DATA_TYPE_CBY422,
+		.depth		= 16,
+	},
+};
+EXPORT_SYMBOL(vpdma_raw_fmts);
+
+const struct vpdma_data_format vpdma_misc_fmts[] = {
+	[VPDMA_DATA_FMT_MV] = {
+		.type		= VPDMA_DATA_FMT_TYPE_MISC,
+		.data_type	= DATA_TYPE_MV,
+		.depth		= 4,
+	},
+};
+EXPORT_SYMBOL(vpdma_misc_fmts);
+
+struct vpdma_channel_info {
+	int num;		/* VPDMA channel number */
+	int cstat_offset;	/* client CSTAT register offset */
+};
+
+static const struct vpdma_channel_info chan_info[] = {
+	[VPE_CHAN_LUMA1_IN] = {
+		.num		= VPE_CHAN_NUM_LUMA1_IN,
+		.cstat_offset	= VPDMA_DEI_LUMA1_CSTAT,
+	},
+	[VPE_CHAN_CHROMA1_IN] = {
+		.num		= VPE_CHAN_NUM_CHROMA1_IN,
+		.cstat_offset	= VPDMA_DEI_CHROMA1_CSTAT,
+	},
+	[VPE_CHAN_LUMA2_IN] = {
+		.num		= VPE_CHAN_NUM_LUMA2_IN,
+		.cstat_offset	= VPDMA_DEI_LUMA2_CSTAT,
+	},
+	[VPE_CHAN_CHROMA2_IN] = {
+		.num		= VPE_CHAN_NUM_CHROMA2_IN,
+		.cstat_offset	= VPDMA_DEI_CHROMA2_CSTAT,
+	},
+	[VPE_CHAN_LUMA3_IN] = {
+		.num		= VPE_CHAN_NUM_LUMA3_IN,
+		.cstat_offset	= VPDMA_DEI_LUMA3_CSTAT,
+	},
+	[VPE_CHAN_CHROMA3_IN] = {
+		.num		= VPE_CHAN_NUM_CHROMA3_IN,
+		.cstat_offset	= VPDMA_DEI_CHROMA3_CSTAT,
+	},
+	[VPE_CHAN_MV_IN] = {
+		.num		= VPE_CHAN_NUM_MV_IN,
+		.cstat_offset	= VPDMA_DEI_MV_IN_CSTAT,
+	},
+	[VPE_CHAN_MV_OUT] = {
+		.num		= VPE_CHAN_NUM_MV_OUT,
+		.cstat_offset	= VPDMA_DEI_MV_OUT_CSTAT,
+	},
+	[VPE_CHAN_LUMA_OUT] = {
+		.num		= VPE_CHAN_NUM_LUMA_OUT,
+		.cstat_offset	= VPDMA_VIP_UP_Y_CSTAT,
+	},
+	[VPE_CHAN_CHROMA_OUT] = {
+		.num		= VPE_CHAN_NUM_CHROMA_OUT,
+		.cstat_offset	= VPDMA_VIP_UP_UV_CSTAT,
+	},
+	[VPE_CHAN_RGB_OUT] = {
+		.num		= VPE_CHAN_NUM_RGB_OUT,
+		.cstat_offset	= VPDMA_VIP_UP_Y_CSTAT,
+	},
+};
+
+static u32 read_reg(struct vpdma_data *vpdma, int offset)
+{
+	return ioread32(vpdma->base + offset);
+}
+
+static void write_reg(struct vpdma_data *vpdma, int offset, u32 value)
+{
+	iowrite32(value, vpdma->base + offset);
+}
+
+static int read_field_reg(struct vpdma_data *vpdma, int offset,
+		u32 mask, int shift)
+{
+	return (read_reg(vpdma, offset) & (mask << shift)) >> shift;
+}
+
+static void write_field_reg(struct vpdma_data *vpdma, int offset, u32 field,
+		u32 mask, int shift)
+{
+	u32 val = read_reg(vpdma, offset);
+
+	val &= ~(mask << shift);
+	val |= (field & mask) << shift;
+
+	write_reg(vpdma, offset, val);
+}
+
+void vpdma_dump_regs(struct vpdma_data *vpdma)
+{
+	struct device *dev = &vpdma->pdev->dev;
+
+#define DUMPREG(r) dev_dbg(dev, "%-35s %08x\n", #r, read_reg(vpdma, VPDMA_##r))
+
+	dev_dbg(dev, "VPDMA Registers:\n");
+
+	DUMPREG(PID);
+	DUMPREG(LIST_ADDR);
+	DUMPREG(LIST_ATTR);
+	DUMPREG(LIST_STAT_SYNC);
+	DUMPREG(BG_RGB);
+	DUMPREG(BG_YUV);
+	DUMPREG(SETUP);
+	DUMPREG(MAX_SIZE1);
+	DUMPREG(MAX_SIZE2);
+	DUMPREG(MAX_SIZE3);
+
+	/*
+	 * dumping registers of only group0 and group3, because VPE channels
+	 * lie within group0 and group3 registers
+	 */
+	DUMPREG(INT_CHAN_STAT(0));
+	DUMPREG(INT_CHAN_MASK(0));
+	DUMPREG(INT_CHAN_STAT(3));
+	DUMPREG(INT_CHAN_MASK(3));
+	DUMPREG(INT_CLIENT0_STAT);
+	DUMPREG(INT_CLIENT0_MASK);
+	DUMPREG(INT_CLIENT1_STAT);
+	DUMPREG(INT_CLIENT1_MASK);
+	DUMPREG(INT_LIST0_STAT);
+	DUMPREG(INT_LIST0_MASK);
+
+	/*
+	 * these are registers specific to VPE clients, we can make this
+	 * function dump client registers specific to VPE or VIP based on
+	 * who is using it
+	 */
+	DUMPREG(DEI_CHROMA1_CSTAT);
+	DUMPREG(DEI_LUMA1_CSTAT);
+	DUMPREG(DEI_CHROMA2_CSTAT);
+	DUMPREG(DEI_LUMA2_CSTAT);
+	DUMPREG(DEI_CHROMA3_CSTAT);
+	DUMPREG(DEI_LUMA3_CSTAT);
+	DUMPREG(DEI_MV_IN_CSTAT);
+	DUMPREG(DEI_MV_OUT_CSTAT);
+	DUMPREG(VIP_UP_Y_CSTAT);
+	DUMPREG(VIP_UP_UV_CSTAT);
+	DUMPREG(VPI_CTL_CSTAT);
+}
+EXPORT_SYMBOL(vpdma_dump_regs);
+
+/*
+ * Allocate a DMA buffer
+ */
+int vpdma_alloc_desc_buf(struct vpdma_buf *buf, size_t size)
+{
+	buf->size = size;
+	buf->mapped = false;
+	buf->addr = kzalloc(size, GFP_KERNEL);
+	if (!buf->addr)
+		return -ENOMEM;
+
+	WARN_ON(((unsigned long)buf->addr & VPDMA_DESC_ALIGN) != 0);
+
+	return 0;
+}
+EXPORT_SYMBOL(vpdma_alloc_desc_buf);
+
+void vpdma_free_desc_buf(struct vpdma_buf *buf)
+{
+	WARN_ON(buf->mapped);
+	kfree(buf->addr);
+	buf->addr = NULL;
+	buf->size = 0;
+}
+EXPORT_SYMBOL(vpdma_free_desc_buf);
+
+/*
+ * map descriptor/payload DMA buffer, enabling DMA access
+ */
+int vpdma_map_desc_buf(struct vpdma_data *vpdma, struct vpdma_buf *buf)
+{
+	struct device *dev = &vpdma->pdev->dev;
+
+	WARN_ON(buf->mapped);
+	buf->dma_addr = dma_map_single(dev, buf->addr, buf->size,
+				DMA_BIDIRECTIONAL);
+	if (dma_mapping_error(dev, buf->dma_addr)) {
+		dev_err(dev, "failed to map buffer\n");
+		return -EINVAL;
+	}
+
+	buf->mapped = true;
+
+	return 0;
+}
+EXPORT_SYMBOL(vpdma_map_desc_buf);
+
+/*
+ * unmap descriptor/payload DMA buffer, disabling DMA access and
+ * allowing the main processor to access the data
+ */
+void vpdma_unmap_desc_buf(struct vpdma_data *vpdma, struct vpdma_buf *buf)
+{
+	struct device *dev = &vpdma->pdev->dev;
+
+	if (buf->mapped)
+		dma_unmap_single(dev, buf->dma_addr, buf->size,
+				DMA_BIDIRECTIONAL);
+
+	buf->mapped = false;
+}
+EXPORT_SYMBOL(vpdma_unmap_desc_buf);
+
+/*
+ * Cleanup all pending descriptors of a list
+ * First, stop the current list being processed.
+ * If the VPDMA was busy, this step makes vpdma to accept post lists.
+ * To cleanup the internal FSM, post abort list descriptor for all the
+ * channels from @channels array of size @size.
+ */
+int vpdma_list_cleanup(struct vpdma_data *vpdma, int list_num,
+		int *channels, int size)
+{
+	struct vpdma_desc_list abort_list;
+	int i, ret, timeout = 500;
+
+	write_reg(vpdma, VPDMA_LIST_ATTR,
+			(list_num << VPDMA_LIST_NUM_SHFT) |
+			(1 << VPDMA_LIST_STOP_SHFT));
+
+	if (size <= 0 || !channels)
+		return 0;
+
+	ret = vpdma_create_desc_list(&abort_list,
+		size * sizeof(struct vpdma_dtd), VPDMA_LIST_TYPE_NORMAL);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < size; i++)
+		vpdma_add_abort_channel_ctd(&abort_list, channels[i]);
+
+	ret = vpdma_map_desc_buf(vpdma, &abort_list.buf);
+	if (ret)
+		goto free_desc;
+	ret = vpdma_submit_descs(vpdma, &abort_list, list_num);
+	if (ret)
+		goto unmap_desc;
+
+	while (vpdma_list_busy(vpdma, list_num) && --timeout)
+		;
+
+	if (timeout == 0) {
+		dev_err(&vpdma->pdev->dev, "Timed out cleaning up VPDMA list\n");
+		ret = -EBUSY;
+	}
+
+unmap_desc:
+	vpdma_unmap_desc_buf(vpdma, &abort_list.buf);
+free_desc:
+	vpdma_free_desc_buf(&abort_list.buf);
+
+	return ret;
+}
+EXPORT_SYMBOL(vpdma_list_cleanup);
+
+/*
+ * create a descriptor list, the user of this list will append configuration,
+ * control and data descriptors to this list, this list will be submitted to
+ * VPDMA. VPDMA's list parser will go through each descriptor and perform the
+ * required DMA operations
+ */
+int vpdma_create_desc_list(struct vpdma_desc_list *list, size_t size, int type)
+{
+	int r;
+
+	r = vpdma_alloc_desc_buf(&list->buf, size);
+	if (r)
+		return r;
+
+	list->next = list->buf.addr;
+
+	list->type = type;
+
+	return 0;
+}
+EXPORT_SYMBOL(vpdma_create_desc_list);
+
+/*
+ * once a descriptor list is parsed by VPDMA, we reset the list by emptying it,
+ * to allow new descriptors to be added to the list.
+ */
+void vpdma_reset_desc_list(struct vpdma_desc_list *list)
+{
+	list->next = list->buf.addr;
+}
+EXPORT_SYMBOL(vpdma_reset_desc_list);
+
+/*
+ * free the buffer allocated for the VPDMA descriptor list, this should be
+ * called when the user doesn't want to use VPDMA any more.
+ */
+void vpdma_free_desc_list(struct vpdma_desc_list *list)
+{
+	vpdma_free_desc_buf(&list->buf);
+
+	list->next = NULL;
+}
+EXPORT_SYMBOL(vpdma_free_desc_list);
+
+bool vpdma_list_busy(struct vpdma_data *vpdma, int list_num)
+{
+	return read_reg(vpdma, VPDMA_LIST_STAT_SYNC) & BIT(list_num + 16);
+}
+EXPORT_SYMBOL(vpdma_list_busy);
+
+/*
+ * submit a list of DMA descriptors to the VPE VPDMA, do not wait for completion
+ */
+int vpdma_submit_descs(struct vpdma_data *vpdma,
+			struct vpdma_desc_list *list, int list_num)
+{
+	int list_size;
+	unsigned long flags;
+
+	if (vpdma_list_busy(vpdma, list_num))
+		return -EBUSY;
+
+	/* 16-byte granularity */
+	list_size = (list->next - list->buf.addr) >> 4;
+
+	spin_lock_irqsave(&vpdma->lock, flags);
+	write_reg(vpdma, VPDMA_LIST_ADDR, (u32) list->buf.dma_addr);
+
+	write_reg(vpdma, VPDMA_LIST_ATTR,
+			(list_num << VPDMA_LIST_NUM_SHFT) |
+			(list->type << VPDMA_LIST_TYPE_SHFT) |
+			list_size);
+	spin_unlock_irqrestore(&vpdma->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(vpdma_submit_descs);
+
+static void dump_dtd(struct vpdma_dtd *dtd);
+
+void vpdma_update_dma_addr(struct vpdma_data *vpdma,
+	struct vpdma_desc_list *list, dma_addr_t dma_addr,
+	void *write_dtd, int drop, int idx)
+{
+	struct vpdma_dtd *dtd = list->buf.addr;
+	dma_addr_t write_desc_addr;
+	int offset;
+
+	dtd += idx;
+	vpdma_unmap_desc_buf(vpdma, &list->buf);
+
+	dtd->start_addr = dma_addr;
+
+	/* Calculate write address from the offset of write_dtd from start
+	 * of the list->buf
+	 */
+	offset = (void *)write_dtd - list->buf.addr;
+	write_desc_addr = list->buf.dma_addr + offset;
+
+	if (drop)
+		dtd->desc_write_addr = dtd_desc_write_addr(write_desc_addr,
+							   1, 1, 0);
+	else
+		dtd->desc_write_addr = dtd_desc_write_addr(write_desc_addr,
+							   1, 0, 0);
+
+	vpdma_map_desc_buf(vpdma, &list->buf);
+
+	dump_dtd(dtd);
+}
+EXPORT_SYMBOL(vpdma_update_dma_addr);
+
+void vpdma_set_max_size(struct vpdma_data *vpdma, int reg_addr,
+			u32 width, u32 height)
+{
+	if (reg_addr != VPDMA_MAX_SIZE1 && reg_addr != VPDMA_MAX_SIZE2 &&
+	    reg_addr != VPDMA_MAX_SIZE3)
+		reg_addr = VPDMA_MAX_SIZE1;
+
+	write_field_reg(vpdma, reg_addr, width - 1,
+			VPDMA_MAX_SIZE_WIDTH_MASK, VPDMA_MAX_SIZE_WIDTH_SHFT);
+
+	write_field_reg(vpdma, reg_addr, height - 1,
+			VPDMA_MAX_SIZE_HEIGHT_MASK, VPDMA_MAX_SIZE_HEIGHT_SHFT);
+
+}
+EXPORT_SYMBOL(vpdma_set_max_size);
+
+static void dump_cfd(struct vpdma_cfd *cfd)
+{
+	int class;
+
+	class = cfd_get_class(cfd);
+
+	pr_debug("config descriptor of payload class: %s\n",
+		class == CFD_CLS_BLOCK ? "simple block" :
+		"address data block");
+
+	if (class == CFD_CLS_BLOCK)
+		pr_debug("word0: dst_addr_offset = 0x%08x\n",
+			cfd->dest_addr_offset);
+
+	if (class == CFD_CLS_BLOCK)
+		pr_debug("word1: num_data_wrds = %d\n", cfd->block_len);
+
+	pr_debug("word2: payload_addr = 0x%08x\n", cfd->payload_addr);
+
+	pr_debug("word3: pkt_type = %d, direct = %d, class = %d, dest = %d, payload_len = %d\n",
+		 cfd_get_pkt_type(cfd),
+		 cfd_get_direct(cfd), class, cfd_get_dest(cfd),
+		 cfd_get_payload_len(cfd));
+}
+
+/*
+ * append a configuration descriptor to the given descriptor list, where the
+ * payload is in the form of a simple data block specified in the descriptor
+ * header, this is used to upload scaler coefficients to the scaler module
+ */
+void vpdma_add_cfd_block(struct vpdma_desc_list *list, int client,
+		struct vpdma_buf *blk, u32 dest_offset)
+{
+	struct vpdma_cfd *cfd;
+	int len = blk->size;
+
+	WARN_ON(blk->dma_addr & VPDMA_DESC_ALIGN);
+
+	cfd = list->next;
+	WARN_ON((void *)(cfd + 1) > (list->buf.addr + list->buf.size));
+
+	cfd->dest_addr_offset = dest_offset;
+	cfd->block_len = len;
+	cfd->payload_addr = (u32) blk->dma_addr;
+	cfd->ctl_payload_len = cfd_pkt_payload_len(CFD_INDIRECT, CFD_CLS_BLOCK,
+				client, len >> 4);
+
+	list->next = cfd + 1;
+
+	dump_cfd(cfd);
+}
+EXPORT_SYMBOL(vpdma_add_cfd_block);
+
+/*
+ * append a configuration descriptor to the given descriptor list, where the
+ * payload is in the address data block format, this is used to a configure a
+ * discontiguous set of MMRs
+ */
+void vpdma_add_cfd_adb(struct vpdma_desc_list *list, int client,
+		struct vpdma_buf *adb)
+{
+	struct vpdma_cfd *cfd;
+	unsigned int len = adb->size;
+
+	WARN_ON(len & VPDMA_ADB_SIZE_ALIGN);
+	WARN_ON(adb->dma_addr & VPDMA_DESC_ALIGN);
+
+	cfd = list->next;
+	BUG_ON((void *)(cfd + 1) > (list->buf.addr + list->buf.size));
+
+	cfd->w0 = 0;
+	cfd->w1 = 0;
+	cfd->payload_addr = (u32) adb->dma_addr;
+	cfd->ctl_payload_len = cfd_pkt_payload_len(CFD_INDIRECT, CFD_CLS_ADB,
+				client, len >> 4);
+
+	list->next = cfd + 1;
+
+	dump_cfd(cfd);
+};
+EXPORT_SYMBOL(vpdma_add_cfd_adb);
+
+/*
+ * control descriptor format change based on what type of control descriptor it
+ * is, we only use 'sync on channel' control descriptors for now, so assume it's
+ * that
+ */
+static void dump_ctd(struct vpdma_ctd *ctd)
+{
+	pr_debug("control descriptor\n");
+
+	pr_debug("word3: pkt_type = %d, source = %d, ctl_type = %d\n",
+		ctd_get_pkt_type(ctd), ctd_get_source(ctd), ctd_get_ctl(ctd));
+}
+
+/*
+ * append a 'sync on channel' type control descriptor to the given descriptor
+ * list, this descriptor stalls the VPDMA list till the time DMA is completed
+ * on the specified channel
+ */
+void vpdma_add_sync_on_channel_ctd(struct vpdma_desc_list *list,
+		enum vpdma_channel chan)
+{
+	struct vpdma_ctd *ctd;
+
+	ctd = list->next;
+	WARN_ON((void *)(ctd + 1) > (list->buf.addr + list->buf.size));
+
+	ctd->w0 = 0;
+	ctd->w1 = 0;
+	ctd->w2 = 0;
+	ctd->type_source_ctl = ctd_type_source_ctl(chan_info[chan].num,
+				CTD_TYPE_SYNC_ON_CHANNEL);
+
+	list->next = ctd + 1;
+
+	dump_ctd(ctd);
+}
+EXPORT_SYMBOL(vpdma_add_sync_on_channel_ctd);
+
+/*
+ * append an 'abort_channel' type control descriptor to the given descriptor
+ * list, this descriptor aborts any DMA transaction happening using the
+ * specified channel
+ */
+void vpdma_add_abort_channel_ctd(struct vpdma_desc_list *list,
+		int chan_num)
+{
+	struct vpdma_ctd *ctd;
+
+	ctd = list->next;
+	WARN_ON((void *)(ctd + 1) > (list->buf.addr + list->buf.size));
+
+	ctd->w0 = 0;
+	ctd->w1 = 0;
+	ctd->w2 = 0;
+	ctd->type_source_ctl = ctd_type_source_ctl(chan_num,
+				CTD_TYPE_ABORT_CHANNEL);
+
+	list->next = ctd + 1;
+
+	dump_ctd(ctd);
+}
+EXPORT_SYMBOL(vpdma_add_abort_channel_ctd);
+
+static void dump_dtd(struct vpdma_dtd *dtd)
+{
+	int dir, chan;
+
+	dir = dtd_get_dir(dtd);
+	chan = dtd_get_chan(dtd);
+
+	pr_debug("%s data transfer descriptor for channel %d\n",
+		dir == DTD_DIR_OUT ? "outbound" : "inbound", chan);
+
+	pr_debug("word0: data_type = %d, notify = %d, field = %d, 1D = %d, even_ln_skp = %d, odd_ln_skp = %d, line_stride = %d\n",
+		dtd_get_data_type(dtd), dtd_get_notify(dtd), dtd_get_field(dtd),
+		dtd_get_1d(dtd), dtd_get_even_line_skip(dtd),
+		dtd_get_odd_line_skip(dtd), dtd_get_line_stride(dtd));
+
+	if (dir == DTD_DIR_IN)
+		pr_debug("word1: line_length = %d, xfer_height = %d\n",
+			dtd_get_line_length(dtd), dtd_get_xfer_height(dtd));
+
+	pr_debug("word2: start_addr = %x\n", dtd->start_addr);
+
+	pr_debug("word3: pkt_type = %d, mode = %d, dir = %d, chan = %d, pri = %d, next_chan = %d\n",
+		 dtd_get_pkt_type(dtd),
+		 dtd_get_mode(dtd), dir, chan, dtd_get_priority(dtd),
+		 dtd_get_next_chan(dtd));
+
+	if (dir == DTD_DIR_IN)
+		pr_debug("word4: frame_width = %d, frame_height = %d\n",
+			dtd_get_frame_width(dtd), dtd_get_frame_height(dtd));
+	else
+		pr_debug("word4: desc_write_addr = 0x%08x, write_desc = %d, drp_data = %d, use_desc_reg = %d\n",
+			dtd_get_desc_write_addr(dtd), dtd_get_write_desc(dtd),
+			dtd_get_drop_data(dtd), dtd_get_use_desc(dtd));
+
+	if (dir == DTD_DIR_IN)
+		pr_debug("word5: hor_start = %d, ver_start = %d\n",
+			dtd_get_h_start(dtd), dtd_get_v_start(dtd));
+	else
+		pr_debug("word5: max_width %d, max_height %d\n",
+			dtd_get_max_width(dtd), dtd_get_max_height(dtd));
+
+	pr_debug("word6: client specific attr0 = 0x%08x\n", dtd->client_attr0);
+	pr_debug("word7: client specific attr1 = 0x%08x\n", dtd->client_attr1);
+}
+
+/*
+ * append an outbound data transfer descriptor to the given descriptor list,
+ * this sets up a 'client to memory' VPDMA transfer for the given VPDMA channel
+ *
+ * @list: vpdma desc list to which we add this descriptor
+ * @width: width of the image in pixels in memory
+ * @c_rect: compose params of output image
+ * @fmt: vpdma data format of the buffer
+ * dma_addr: dma address as seen by VPDMA
+ * max_width: enum for maximum width of data transfer
+ * max_height: enum for maximum height of data transfer
+ * chan: VPDMA channel
+ * flags: VPDMA flags to configure some descriptor fields
+ */
+void vpdma_add_out_dtd(struct vpdma_desc_list *list, int width,
+		int stride, const struct v4l2_rect *c_rect,
+		const struct vpdma_data_format *fmt, dma_addr_t dma_addr,
+		int max_w, int max_h, enum vpdma_channel chan, u32 flags)
+{
+	vpdma_rawchan_add_out_dtd(list, width, stride, c_rect, fmt, dma_addr,
+				  max_w, max_h, chan_info[chan].num, flags);
+}
+EXPORT_SYMBOL(vpdma_add_out_dtd);
+
+void vpdma_rawchan_add_out_dtd(struct vpdma_desc_list *list, int width,
+		int stride, const struct v4l2_rect *c_rect,
+		const struct vpdma_data_format *fmt, dma_addr_t dma_addr,
+		int max_w, int max_h, int raw_vpdma_chan, u32 flags)
+{
+	int priority = 0;
+	int field = 0;
+	int notify = 1;
+	int channel, next_chan;
+	struct v4l2_rect rect = *c_rect;
+	int depth = fmt->depth;
+	struct vpdma_dtd *dtd;
+
+	channel = next_chan = raw_vpdma_chan;
+
+	if (fmt->type == VPDMA_DATA_FMT_TYPE_YUV &&
+	    (fmt->data_type == DATA_TYPE_C420 ||
+	     fmt->data_type == DATA_TYPE_CB420)) {
+		rect.height >>= 1;
+		rect.top >>= 1;
+		depth = 8;
+	}
+
+	dma_addr += rect.top * stride + (rect.left * depth >> 3);
+
+	dtd = list->next;
+	WARN_ON((void *)(dtd + 1) > (list->buf.addr + list->buf.size));
+
+	dtd->type_ctl_stride = dtd_type_ctl_stride(fmt->data_type,
+					notify,
+					field,
+					!!(flags & VPDMA_DATA_FRAME_1D),
+					!!(flags & VPDMA_DATA_EVEN_LINE_SKIP),
+					!!(flags & VPDMA_DATA_ODD_LINE_SKIP),
+					stride);
+	dtd->w1 = 0;
+	dtd->start_addr = (u32) dma_addr;
+	dtd->pkt_ctl = dtd_pkt_ctl(!!(flags & VPDMA_DATA_MODE_TILED),
+				DTD_DIR_OUT, channel, priority, next_chan);
+	dtd->desc_write_addr = dtd_desc_write_addr(0, 0, 0, 0);
+	dtd->max_width_height = dtd_max_width_height(max_w, max_h);
+	dtd->client_attr0 = 0;
+	dtd->client_attr1 = 0;
+
+	list->next = dtd + 1;
+
+	dump_dtd(dtd);
+}
+EXPORT_SYMBOL(vpdma_rawchan_add_out_dtd);
+
+/*
+ * append an inbound data transfer descriptor to the given descriptor list,
+ * this sets up a 'memory to client' VPDMA transfer for the given VPDMA channel
+ *
+ * @list: vpdma desc list to which we add this descriptor
+ * @width: width of the image in pixels in memory(not the cropped width)
+ * @c_rect: crop params of input image
+ * @fmt: vpdma data format of the buffer
+ * dma_addr: dma address as seen by VPDMA
+ * chan: VPDMA channel
+ * field: top or bottom field info of the input image
+ * flags: VPDMA flags to configure some descriptor fields
+ * frame_width/height: the complete width/height of the image presented to the
+ *			client (this makes sense when multiple channels are
+ *			connected to the same client, forming a larger frame)
+ * start_h, start_v: position where the given channel starts providing pixel
+ *			data to the client (makes sense when multiple channels
+ *			contribute to the client)
+ */
+void vpdma_add_in_dtd(struct vpdma_desc_list *list, int width,
+		int stride, const struct v4l2_rect *c_rect,
+		const struct vpdma_data_format *fmt, dma_addr_t dma_addr,
+		enum vpdma_channel chan, int field, u32 flags, int frame_width,
+		int frame_height, int start_h, int start_v)
+{
+	int priority = 0;
+	int notify = 1;
+	int depth = fmt->depth;
+	int channel, next_chan;
+	struct v4l2_rect rect = *c_rect;
+	struct vpdma_dtd *dtd;
+
+	channel = next_chan = chan_info[chan].num;
+
+	if (fmt->type == VPDMA_DATA_FMT_TYPE_YUV &&
+	    (fmt->data_type == DATA_TYPE_C420 ||
+	     fmt->data_type == DATA_TYPE_CB420)) {
+		rect.height >>= 1;
+		rect.top >>= 1;
+		depth = 8;
+	}
+
+	dma_addr += rect.top * stride + (rect.left * depth >> 3);
+
+	dtd = list->next;
+	WARN_ON((void *)(dtd + 1) > (list->buf.addr + list->buf.size));
+
+	dtd->type_ctl_stride = dtd_type_ctl_stride(fmt->data_type,
+					notify,
+					field,
+					!!(flags & VPDMA_DATA_FRAME_1D),
+					!!(flags & VPDMA_DATA_EVEN_LINE_SKIP),
+					!!(flags & VPDMA_DATA_ODD_LINE_SKIP),
+					stride);
+
+	dtd->xfer_length_height = dtd_xfer_length_height(rect.width,
+					rect.height);
+	dtd->start_addr = (u32) dma_addr;
+	dtd->pkt_ctl = dtd_pkt_ctl(!!(flags & VPDMA_DATA_MODE_TILED),
+				DTD_DIR_IN, channel, priority, next_chan);
+	dtd->frame_width_height = dtd_frame_width_height(frame_width,
+					frame_height);
+	dtd->start_h_v = dtd_start_h_v(start_h, start_v);
+	dtd->client_attr0 = 0;
+	dtd->client_attr1 = 0;
+
+	list->next = dtd + 1;
+
+	dump_dtd(dtd);
+}
+EXPORT_SYMBOL(vpdma_add_in_dtd);
+
+int vpdma_hwlist_alloc(struct vpdma_data *vpdma, void *priv)
+{
+	int i, list_num = -1;
+	unsigned long flags;
+
+	spin_lock_irqsave(&vpdma->lock, flags);
+	for (i = 0; i < VPDMA_MAX_NUM_LIST && vpdma->hwlist_used[i]; i++)
+		;
+
+	if (i < VPDMA_MAX_NUM_LIST) {
+		list_num = i;
+		vpdma->hwlist_used[i] = true;
+		vpdma->hwlist_priv[i] = priv;
+	}
+	spin_unlock_irqrestore(&vpdma->lock, flags);
+
+	return list_num;
+}
+EXPORT_SYMBOL(vpdma_hwlist_alloc);
+
+void *vpdma_hwlist_get_priv(struct vpdma_data *vpdma, int list_num)
+{
+	if (!vpdma || list_num >= VPDMA_MAX_NUM_LIST)
+		return NULL;
+
+	return vpdma->hwlist_priv[list_num];
+}
+EXPORT_SYMBOL(vpdma_hwlist_get_priv);
+
+void *vpdma_hwlist_release(struct vpdma_data *vpdma, int list_num)
+{
+	void *priv;
+	unsigned long flags;
+
+	spin_lock_irqsave(&vpdma->lock, flags);
+	vpdma->hwlist_used[list_num] = false;
+	priv = vpdma->hwlist_priv;
+	spin_unlock_irqrestore(&vpdma->lock, flags);
+
+	return priv;
+}
+EXPORT_SYMBOL(vpdma_hwlist_release);
+
+/* set or clear the mask for list complete interrupt */
+void vpdma_enable_list_complete_irq(struct vpdma_data *vpdma, int irq_num,
+		int list_num, bool enable)
+{
+	u32 reg_addr = VPDMA_INT_LIST0_MASK + VPDMA_INTX_OFFSET * irq_num;
+	u32 val;
+
+	val = read_reg(vpdma, reg_addr);
+	if (enable)
+		val |= (1 << (list_num * 2));
+	else
+		val &= ~(1 << (list_num * 2));
+	write_reg(vpdma, reg_addr, val);
+}
+EXPORT_SYMBOL(vpdma_enable_list_complete_irq);
+
+/* get the LIST_STAT register */
+unsigned int vpdma_get_list_stat(struct vpdma_data *vpdma, int irq_num)
+{
+	u32 reg_addr = VPDMA_INT_LIST0_STAT + VPDMA_INTX_OFFSET * irq_num;
+
+	return read_reg(vpdma, reg_addr);
+}
+EXPORT_SYMBOL(vpdma_get_list_stat);
+
+/* get the LIST_MASK register */
+unsigned int vpdma_get_list_mask(struct vpdma_data *vpdma, int irq_num)
+{
+	u32 reg_addr = VPDMA_INT_LIST0_MASK + VPDMA_INTX_OFFSET * irq_num;
+
+	return read_reg(vpdma, reg_addr);
+}
+EXPORT_SYMBOL(vpdma_get_list_mask);
+
+/* clear previously occurred list interrupts in the LIST_STAT register */
+void vpdma_clear_list_stat(struct vpdma_data *vpdma, int irq_num,
+			   int list_num)
+{
+	u32 reg_addr = VPDMA_INT_LIST0_STAT + VPDMA_INTX_OFFSET * irq_num;
+
+	write_reg(vpdma, reg_addr, 3 << (list_num * 2));
+}
+EXPORT_SYMBOL(vpdma_clear_list_stat);
+
+void vpdma_set_bg_color(struct vpdma_data *vpdma,
+		struct vpdma_data_format *fmt, u32 color)
+{
+	if (fmt->type == VPDMA_DATA_FMT_TYPE_RGB)
+		write_reg(vpdma, VPDMA_BG_RGB, color);
+	else if (fmt->type == VPDMA_DATA_FMT_TYPE_YUV)
+		write_reg(vpdma, VPDMA_BG_YUV, color);
+}
+EXPORT_SYMBOL(vpdma_set_bg_color);
+
+/*
+ * configures the output mode of the line buffer for the given client, the
+ * line buffer content can either be mirrored(each line repeated twice) or
+ * passed to the client as is
+ */
+void vpdma_set_line_mode(struct vpdma_data *vpdma, int line_mode,
+		enum vpdma_channel chan)
+{
+	int client_cstat = chan_info[chan].cstat_offset;
+
+	write_field_reg(vpdma, client_cstat, line_mode,
+		VPDMA_CSTAT_LINE_MODE_MASK, VPDMA_CSTAT_LINE_MODE_SHIFT);
+}
+EXPORT_SYMBOL(vpdma_set_line_mode);
+
+/*
+ * configures the event which should trigger VPDMA transfer for the given
+ * client
+ */
+void vpdma_set_frame_start_event(struct vpdma_data *vpdma,
+		enum vpdma_frame_start_event fs_event,
+		enum vpdma_channel chan)
+{
+	int client_cstat = chan_info[chan].cstat_offset;
+
+	write_field_reg(vpdma, client_cstat, fs_event,
+		VPDMA_CSTAT_FRAME_START_MASK, VPDMA_CSTAT_FRAME_START_SHIFT);
+}
+EXPORT_SYMBOL(vpdma_set_frame_start_event);
+
+static void vpdma_firmware_cb(const struct firmware *f, void *context)
+{
+	struct vpdma_data *vpdma = context;
+	struct vpdma_buf fw_dma_buf;
+	int i, r;
+
+	dev_dbg(&vpdma->pdev->dev, "firmware callback\n");
+
+	if (!f || !f->data) {
+		dev_err(&vpdma->pdev->dev, "couldn't get firmware\n");
+		return;
+	}
+
+	/* already initialized */
+	if (read_field_reg(vpdma, VPDMA_LIST_ATTR, VPDMA_LIST_RDY_MASK,
+			VPDMA_LIST_RDY_SHFT)) {
+		vpdma->cb(vpdma->pdev);
+		return;
+	}
+
+	r = vpdma_alloc_desc_buf(&fw_dma_buf, f->size);
+	if (r) {
+		dev_err(&vpdma->pdev->dev,
+			"failed to allocate dma buffer for firmware\n");
+		goto rel_fw;
+	}
+
+	memcpy(fw_dma_buf.addr, f->data, f->size);
+
+	vpdma_map_desc_buf(vpdma, &fw_dma_buf);
+
+	write_reg(vpdma, VPDMA_LIST_ADDR, (u32) fw_dma_buf.dma_addr);
+
+	for (i = 0; i < 100; i++) {		/* max 1 second */
+		msleep_interruptible(10);
+
+		if (read_field_reg(vpdma, VPDMA_LIST_ATTR, VPDMA_LIST_RDY_MASK,
+				VPDMA_LIST_RDY_SHFT))
+			break;
+	}
+
+	if (i == 100) {
+		dev_err(&vpdma->pdev->dev, "firmware upload failed\n");
+		goto free_buf;
+	}
+
+	vpdma->cb(vpdma->pdev);
+
+free_buf:
+	vpdma_unmap_desc_buf(vpdma, &fw_dma_buf);
+
+	vpdma_free_desc_buf(&fw_dma_buf);
+rel_fw:
+	release_firmware(f);
+}
+
+static int vpdma_load_firmware(struct vpdma_data *vpdma)
+{
+	int r;
+	struct device *dev = &vpdma->pdev->dev;
+
+	r = request_firmware_nowait(THIS_MODULE, 1,
+		(const char *) VPDMA_FIRMWARE, dev, GFP_KERNEL, vpdma,
+		vpdma_firmware_cb);
+	if (r) {
+		dev_err(dev, "firmware not available %s\n", VPDMA_FIRMWARE);
+		return r;
+	} else {
+		dev_info(dev, "loading firmware %s\n", VPDMA_FIRMWARE);
+	}
+
+	return 0;
+}
+
+int vpdma_create(struct platform_device *pdev, struct vpdma_data *vpdma,
+		void (*cb)(struct platform_device *pdev))
+{
+	struct resource *res;
+	int r;
+
+	dev_dbg(&pdev->dev, "vpdma_create\n");
+
+	vpdma->pdev = pdev;
+	vpdma->cb = cb;
+	spin_lock_init(&vpdma->lock);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vpdma");
+	if (res == NULL) {
+		dev_err(&pdev->dev, "missing platform resources data\n");
+		return -ENODEV;
+	}
+
+	vpdma->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	if (!vpdma->base) {
+		dev_err(&pdev->dev, "failed to ioremap\n");
+		return -ENOMEM;
+	}
+
+	r = vpdma_load_firmware(vpdma);
+	if (r) {
+		pr_err("failed to load firmware %s\n", VPDMA_FIRMWARE);
+		return r;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(vpdma_create);
+
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_FIRMWARE(VPDMA_FIRMWARE);
+MODULE_LICENSE("GPL v2");