Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 933 insertions, 0 deletions

diff --git a/drivers/media/platform/xilinx/xilinx-tpg.c b/drivers/media/platform/xilinx/xilinx-tpg.c
new file mode 100644
index 000000000..0f2d5a0ed
--- /dev/null
+++ b/drivers/media/platform/xilinx/xilinx-tpg.c
@@ -0,0 +1,933 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx Test Pattern Generator
+ *
+ * Copyright (C) 2013-2015 Ideas on Board
+ * Copyright (C) 2013-2015 Xilinx, Inc.
+ *
+ * Contacts: Hyun Kwon <hyun.kwon@xilinx.com>
+ *           Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ */
+
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/xilinx-v4l2-controls.h>
+
+#include <media/v4l2-async.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-subdev.h>
+
+#include "xilinx-vip.h"
+#include "xilinx-vtc.h"
+
+#define XTPG_CTRL_STATUS_SLAVE_ERROR		(1 << 16)
+#define XTPG_CTRL_IRQ_SLAVE_ERROR		(1 << 16)
+
+#define XTPG_PATTERN_CONTROL			0x0100
+#define XTPG_PATTERN_MASK			(0xf << 0)
+#define XTPG_PATTERN_CONTROL_CROSS_HAIRS	(1 << 4)
+#define XTPG_PATTERN_CONTROL_MOVING_BOX		(1 << 5)
+#define XTPG_PATTERN_CONTROL_COLOR_MASK_SHIFT	6
+#define XTPG_PATTERN_CONTROL_COLOR_MASK_MASK	(0xf << 6)
+#define XTPG_PATTERN_CONTROL_STUCK_PIXEL	(1 << 9)
+#define XTPG_PATTERN_CONTROL_NOISE		(1 << 10)
+#define XTPG_PATTERN_CONTROL_MOTION		(1 << 12)
+#define XTPG_MOTION_SPEED			0x0104
+#define XTPG_CROSS_HAIRS			0x0108
+#define XTPG_CROSS_HAIRS_ROW_SHIFT		0
+#define XTPG_CROSS_HAIRS_ROW_MASK		(0xfff << 0)
+#define XTPG_CROSS_HAIRS_COLUMN_SHIFT		16
+#define XTPG_CROSS_HAIRS_COLUMN_MASK		(0xfff << 16)
+#define XTPG_ZPLATE_HOR_CONTROL			0x010c
+#define XTPG_ZPLATE_VER_CONTROL			0x0110
+#define XTPG_ZPLATE_START_SHIFT			0
+#define XTPG_ZPLATE_START_MASK			(0xffff << 0)
+#define XTPG_ZPLATE_SPEED_SHIFT			16
+#define XTPG_ZPLATE_SPEED_MASK			(0xffff << 16)
+#define XTPG_BOX_SIZE				0x0114
+#define XTPG_BOX_COLOR				0x0118
+#define XTPG_STUCK_PIXEL_THRESH			0x011c
+#define XTPG_NOISE_GAIN				0x0120
+#define XTPG_BAYER_PHASE			0x0124
+#define XTPG_BAYER_PHASE_RGGB			0
+#define XTPG_BAYER_PHASE_GRBG			1
+#define XTPG_BAYER_PHASE_GBRG			2
+#define XTPG_BAYER_PHASE_BGGR			3
+#define XTPG_BAYER_PHASE_OFF			4
+
+/*
+ * The minimum blanking value is one clock cycle for the front porch, one clock
+ * cycle for the sync pulse and one clock cycle for the back porch.
+ */
+#define XTPG_MIN_HBLANK			3
+#define XTPG_MAX_HBLANK			(XVTC_MAX_HSIZE - XVIP_MIN_WIDTH)
+#define XTPG_MIN_VBLANK			3
+#define XTPG_MAX_VBLANK			(XVTC_MAX_VSIZE - XVIP_MIN_HEIGHT)
+
+/**
+ * struct xtpg_device - Xilinx Test Pattern Generator device structure
+ * @xvip: Xilinx Video IP device
+ * @pads: media pads
+ * @npads: number of pads (1 or 2)
+ * @has_input: whether an input is connected to the sink pad
+ * @formats: active V4L2 media bus format for each pad
+ * @default_format: default V4L2 media bus format
+ * @vip_format: format information corresponding to the active format
+ * @bayer: boolean flag if TPG is set to any bayer format
+ * @ctrl_handler: control handler
+ * @hblank: horizontal blanking control
+ * @vblank: vertical blanking control
+ * @pattern: test pattern control
+ * @streaming: is the video stream active
+ * @vtc: video timing controller
+ * @vtmux_gpio: video timing mux GPIO
+ */
+struct xtpg_device {
+	struct xvip_device xvip;
+
+	struct media_pad pads[2];
+	unsigned int npads;
+	bool has_input;
+
+	struct v4l2_mbus_framefmt formats[2];
+	struct v4l2_mbus_framefmt default_format;
+	const struct xvip_video_format *vip_format;
+	bool bayer;
+
+	struct v4l2_ctrl_handler ctrl_handler;
+	struct v4l2_ctrl *hblank;
+	struct v4l2_ctrl *vblank;
+	struct v4l2_ctrl *pattern;
+	bool streaming;
+
+	struct xvtc_device *vtc;
+	struct gpio_desc *vtmux_gpio;
+};
+
+static inline struct xtpg_device *to_tpg(struct v4l2_subdev *subdev)
+{
+	return container_of(subdev, struct xtpg_device, xvip.subdev);
+}
+
+static u32 xtpg_get_bayer_phase(unsigned int code)
+{
+	switch (code) {
+	case MEDIA_BUS_FMT_SRGGB8_1X8:
+		return XTPG_BAYER_PHASE_RGGB;
+	case MEDIA_BUS_FMT_SGRBG8_1X8:
+		return XTPG_BAYER_PHASE_GRBG;
+	case MEDIA_BUS_FMT_SGBRG8_1X8:
+		return XTPG_BAYER_PHASE_GBRG;
+	case MEDIA_BUS_FMT_SBGGR8_1X8:
+		return XTPG_BAYER_PHASE_BGGR;
+	default:
+		return XTPG_BAYER_PHASE_OFF;
+	}
+}
+
+static void __xtpg_update_pattern_control(struct xtpg_device *xtpg,
+					  bool passthrough, bool pattern)
+{
+	u32 pattern_mask = (1 << (xtpg->pattern->maximum + 1)) - 1;
+
+	/*
+	 * If the TPG has no sink pad or no input connected to its sink pad
+	 * passthrough mode can't be enabled.
+	 */
+	if (xtpg->npads == 1 || !xtpg->has_input)
+		passthrough = false;
+
+	/* If passthrough mode is allowed unmask bit 0. */
+	if (passthrough)
+		pattern_mask &= ~1;
+
+	/* If test pattern mode is allowed unmask all other bits. */
+	if (pattern)
+		pattern_mask &= 1;
+
+	__v4l2_ctrl_modify_range(xtpg->pattern, 0, xtpg->pattern->maximum,
+				 pattern_mask, pattern ? 9 : 0);
+}
+
+static void xtpg_update_pattern_control(struct xtpg_device *xtpg,
+					bool passthrough, bool pattern)
+{
+	mutex_lock(xtpg->ctrl_handler.lock);
+	__xtpg_update_pattern_control(xtpg, passthrough, pattern);
+	mutex_unlock(xtpg->ctrl_handler.lock);
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 Subdevice Video Operations
+ */
+
+static int xtpg_s_stream(struct v4l2_subdev *subdev, int enable)
+{
+	struct xtpg_device *xtpg = to_tpg(subdev);
+	unsigned int width = xtpg->formats[0].width;
+	unsigned int height = xtpg->formats[0].height;
+	bool passthrough;
+	u32 bayer_phase;
+
+	if (!enable) {
+		xvip_stop(&xtpg->xvip);
+		if (xtpg->vtc)
+			xvtc_generator_stop(xtpg->vtc);
+
+		xtpg_update_pattern_control(xtpg, true, true);
+		xtpg->streaming = false;
+		return 0;
+	}
+
+	xvip_set_frame_size(&xtpg->xvip, &xtpg->formats[0]);
+
+	if (xtpg->vtc) {
+		struct xvtc_config config = {
+			.hblank_start = width,
+			.hsync_start = width + 1,
+			.vblank_start = height,
+			.vsync_start = height + 1,
+		};
+		unsigned int htotal;
+		unsigned int vtotal;
+
+		htotal = min_t(unsigned int, XVTC_MAX_HSIZE,
+			       v4l2_ctrl_g_ctrl(xtpg->hblank) + width);
+		vtotal = min_t(unsigned int, XVTC_MAX_VSIZE,
+			       v4l2_ctrl_g_ctrl(xtpg->vblank) + height);
+
+		config.hsync_end = htotal - 1;
+		config.hsize = htotal;
+		config.vsync_end = vtotal - 1;
+		config.vsize = vtotal;
+
+		xvtc_generator_start(xtpg->vtc, &config);
+	}
+
+	/*
+	 * Configure the bayer phase and video timing mux based on the
+	 * operation mode (passthrough or test pattern generation). The test
+	 * pattern can be modified by the control set handler, we thus need to
+	 * take the control lock here to avoid races.
+	 */
+	mutex_lock(xtpg->ctrl_handler.lock);
+
+	xvip_clr_and_set(&xtpg->xvip, XTPG_PATTERN_CONTROL,
+			 XTPG_PATTERN_MASK, xtpg->pattern->cur.val);
+
+	/*
+	 * Switching between passthrough and test pattern generation modes isn't
+	 * allowed during streaming, update the control range accordingly.
+	 */
+	passthrough = xtpg->pattern->cur.val == 0;
+	__xtpg_update_pattern_control(xtpg, passthrough, !passthrough);
+
+	xtpg->streaming = true;
+
+	mutex_unlock(xtpg->ctrl_handler.lock);
+
+	/*
+	 * For TPG v5.0, the bayer phase needs to be off for the pass through
+	 * mode, otherwise the external input would be subsampled.
+	 */
+	bayer_phase = passthrough ? XTPG_BAYER_PHASE_OFF
+		    : xtpg_get_bayer_phase(xtpg->formats[0].code);
+	xvip_write(&xtpg->xvip, XTPG_BAYER_PHASE, bayer_phase);
+
+	if (xtpg->vtmux_gpio)
+		gpiod_set_value_cansleep(xtpg->vtmux_gpio, !passthrough);
+
+	xvip_start(&xtpg->xvip);
+
+	return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 Subdevice Pad Operations
+ */
+
+static struct v4l2_mbus_framefmt *
+__xtpg_get_pad_format(struct xtpg_device *xtpg,
+		      struct v4l2_subdev_state *sd_state,
+		      unsigned int pad, u32 which)
+{
+	switch (which) {
+	case V4L2_SUBDEV_FORMAT_TRY:
+		return v4l2_subdev_get_try_format(&xtpg->xvip.subdev,
+						  sd_state, pad);
+	case V4L2_SUBDEV_FORMAT_ACTIVE:
+		return &xtpg->formats[pad];
+	default:
+		return NULL;
+	}
+}
+
+static int xtpg_get_format(struct v4l2_subdev *subdev,
+			   struct v4l2_subdev_state *sd_state,
+			   struct v4l2_subdev_format *fmt)
+{
+	struct xtpg_device *xtpg = to_tpg(subdev);
+
+	fmt->format = *__xtpg_get_pad_format(xtpg, sd_state, fmt->pad,
+					     fmt->which);
+
+	return 0;
+}
+
+static int xtpg_set_format(struct v4l2_subdev *subdev,
+			   struct v4l2_subdev_state *sd_state,
+			   struct v4l2_subdev_format *fmt)
+{
+	struct xtpg_device *xtpg = to_tpg(subdev);
+	struct v4l2_mbus_framefmt *__format;
+	u32 bayer_phase;
+
+	__format = __xtpg_get_pad_format(xtpg, sd_state, fmt->pad, fmt->which);
+
+	/* In two pads mode the source pad format is always identical to the
+	 * sink pad format.
+	 */
+	if (xtpg->npads == 2 && fmt->pad == 1) {
+		fmt->format = *__format;
+		return 0;
+	}
+
+	/* Bayer phase is configurable at runtime */
+	if (xtpg->bayer) {
+		bayer_phase = xtpg_get_bayer_phase(fmt->format.code);
+		if (bayer_phase != XTPG_BAYER_PHASE_OFF)
+			__format->code = fmt->format.code;
+	}
+
+	xvip_set_format_size(__format, fmt);
+
+	fmt->format = *__format;
+
+	/* Propagate the format to the source pad. */
+	if (xtpg->npads == 2) {
+		__format = __xtpg_get_pad_format(xtpg, sd_state, 1,
+						 fmt->which);
+		*__format = fmt->format;
+	}
+
+	return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 Subdevice Operations
+ */
+
+static int xtpg_enum_frame_size(struct v4l2_subdev *subdev,
+				struct v4l2_subdev_state *sd_state,
+				struct v4l2_subdev_frame_size_enum *fse)
+{
+	struct v4l2_mbus_framefmt *format;
+
+	format = v4l2_subdev_get_try_format(subdev, sd_state, fse->pad);
+
+	if (fse->index || fse->code != format->code)
+		return -EINVAL;
+
+	/* Min / max values for pad 0 is always fixed in both one and two pads
+	 * modes. In two pads mode, the source pad(= 1) size is identical to
+	 * the sink pad size */
+	if (fse->pad == 0) {
+		fse->min_width = XVIP_MIN_WIDTH;
+		fse->max_width = XVIP_MAX_WIDTH;
+		fse->min_height = XVIP_MIN_HEIGHT;
+		fse->max_height = XVIP_MAX_HEIGHT;
+	} else {
+		fse->min_width = format->width;
+		fse->max_width = format->width;
+		fse->min_height = format->height;
+		fse->max_height = format->height;
+	}
+
+	return 0;
+}
+
+static int xtpg_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh)
+{
+	struct xtpg_device *xtpg = to_tpg(subdev);
+	struct v4l2_mbus_framefmt *format;
+
+	format = v4l2_subdev_get_try_format(subdev, fh->state, 0);
+	*format = xtpg->default_format;
+
+	if (xtpg->npads == 2) {
+		format = v4l2_subdev_get_try_format(subdev, fh->state, 1);
+		*format = xtpg->default_format;
+	}
+
+	return 0;
+}
+
+static int xtpg_close(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh)
+{
+	return 0;
+}
+
+static int xtpg_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct xtpg_device *xtpg = container_of(ctrl->handler,
+						struct xtpg_device,
+						ctrl_handler);
+	switch (ctrl->id) {
+	case V4L2_CID_TEST_PATTERN:
+		xvip_clr_and_set(&xtpg->xvip, XTPG_PATTERN_CONTROL,
+				 XTPG_PATTERN_MASK, ctrl->val);
+		return 0;
+	case V4L2_CID_XILINX_TPG_CROSS_HAIRS:
+		xvip_clr_or_set(&xtpg->xvip, XTPG_PATTERN_CONTROL,
+				XTPG_PATTERN_CONTROL_CROSS_HAIRS, ctrl->val);
+		return 0;
+	case V4L2_CID_XILINX_TPG_MOVING_BOX:
+		xvip_clr_or_set(&xtpg->xvip, XTPG_PATTERN_CONTROL,
+				XTPG_PATTERN_CONTROL_MOVING_BOX, ctrl->val);
+		return 0;
+	case V4L2_CID_XILINX_TPG_COLOR_MASK:
+		xvip_clr_and_set(&xtpg->xvip, XTPG_PATTERN_CONTROL,
+				 XTPG_PATTERN_CONTROL_COLOR_MASK_MASK,
+				 ctrl->val <<
+				 XTPG_PATTERN_CONTROL_COLOR_MASK_SHIFT);
+		return 0;
+	case V4L2_CID_XILINX_TPG_STUCK_PIXEL:
+		xvip_clr_or_set(&xtpg->xvip, XTPG_PATTERN_CONTROL,
+				XTPG_PATTERN_CONTROL_STUCK_PIXEL, ctrl->val);
+		return 0;
+	case V4L2_CID_XILINX_TPG_NOISE:
+		xvip_clr_or_set(&xtpg->xvip, XTPG_PATTERN_CONTROL,
+				XTPG_PATTERN_CONTROL_NOISE, ctrl->val);
+		return 0;
+	case V4L2_CID_XILINX_TPG_MOTION:
+		xvip_clr_or_set(&xtpg->xvip, XTPG_PATTERN_CONTROL,
+				XTPG_PATTERN_CONTROL_MOTION, ctrl->val);
+		return 0;
+	case V4L2_CID_XILINX_TPG_MOTION_SPEED:
+		xvip_write(&xtpg->xvip, XTPG_MOTION_SPEED, ctrl->val);
+		return 0;
+	case V4L2_CID_XILINX_TPG_CROSS_HAIR_ROW:
+		xvip_clr_and_set(&xtpg->xvip, XTPG_CROSS_HAIRS,
+				 XTPG_CROSS_HAIRS_ROW_MASK,
+				 ctrl->val << XTPG_CROSS_HAIRS_ROW_SHIFT);
+		return 0;
+	case V4L2_CID_XILINX_TPG_CROSS_HAIR_COLUMN:
+		xvip_clr_and_set(&xtpg->xvip, XTPG_CROSS_HAIRS,
+				 XTPG_CROSS_HAIRS_COLUMN_MASK,
+				 ctrl->val << XTPG_CROSS_HAIRS_COLUMN_SHIFT);
+		return 0;
+	case V4L2_CID_XILINX_TPG_ZPLATE_HOR_START:
+		xvip_clr_and_set(&xtpg->xvip, XTPG_ZPLATE_HOR_CONTROL,
+				 XTPG_ZPLATE_START_MASK,
+				 ctrl->val << XTPG_ZPLATE_START_SHIFT);
+		return 0;
+	case V4L2_CID_XILINX_TPG_ZPLATE_HOR_SPEED:
+		xvip_clr_and_set(&xtpg->xvip, XTPG_ZPLATE_HOR_CONTROL,
+				 XTPG_ZPLATE_SPEED_MASK,
+				 ctrl->val << XTPG_ZPLATE_SPEED_SHIFT);
+		return 0;
+	case V4L2_CID_XILINX_TPG_ZPLATE_VER_START:
+		xvip_clr_and_set(&xtpg->xvip, XTPG_ZPLATE_VER_CONTROL,
+				 XTPG_ZPLATE_START_MASK,
+				 ctrl->val << XTPG_ZPLATE_START_SHIFT);
+		return 0;
+	case V4L2_CID_XILINX_TPG_ZPLATE_VER_SPEED:
+		xvip_clr_and_set(&xtpg->xvip, XTPG_ZPLATE_VER_CONTROL,
+				 XTPG_ZPLATE_SPEED_MASK,
+				 ctrl->val << XTPG_ZPLATE_SPEED_SHIFT);
+		return 0;
+	case V4L2_CID_XILINX_TPG_BOX_SIZE:
+		xvip_write(&xtpg->xvip, XTPG_BOX_SIZE, ctrl->val);
+		return 0;
+	case V4L2_CID_XILINX_TPG_BOX_COLOR:
+		xvip_write(&xtpg->xvip, XTPG_BOX_COLOR, ctrl->val);
+		return 0;
+	case V4L2_CID_XILINX_TPG_STUCK_PIXEL_THRESH:
+		xvip_write(&xtpg->xvip, XTPG_STUCK_PIXEL_THRESH, ctrl->val);
+		return 0;
+	case V4L2_CID_XILINX_TPG_NOISE_GAIN:
+		xvip_write(&xtpg->xvip, XTPG_NOISE_GAIN, ctrl->val);
+		return 0;
+	}
+
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops xtpg_ctrl_ops = {
+	.s_ctrl	= xtpg_s_ctrl,
+};
+
+static const struct v4l2_subdev_core_ops xtpg_core_ops = {
+};
+
+static const struct v4l2_subdev_video_ops xtpg_video_ops = {
+	.s_stream = xtpg_s_stream,
+};
+
+static const struct v4l2_subdev_pad_ops xtpg_pad_ops = {
+	.enum_mbus_code		= xvip_enum_mbus_code,
+	.enum_frame_size	= xtpg_enum_frame_size,
+	.get_fmt		= xtpg_get_format,
+	.set_fmt		= xtpg_set_format,
+};
+
+static const struct v4l2_subdev_ops xtpg_ops = {
+	.core   = &xtpg_core_ops,
+	.video  = &xtpg_video_ops,
+	.pad    = &xtpg_pad_ops,
+};
+
+static const struct v4l2_subdev_internal_ops xtpg_internal_ops = {
+	.open	= xtpg_open,
+	.close	= xtpg_close,
+};
+
+/*
+ * Control Config
+ */
+
+static const char *const xtpg_pattern_strings[] = {
+	"Passthrough",
+	"Horizontal Ramp",
+	"Vertical Ramp",
+	"Temporal Ramp",
+	"Solid Red",
+	"Solid Green",
+	"Solid Blue",
+	"Solid Black",
+	"Solid White",
+	"Color Bars",
+	"Zone Plate",
+	"Tartan Color Bars",
+	"Cross Hatch",
+	"None",
+	"Vertical/Horizontal Ramps",
+	"Black/White Checker Board",
+};
+
+static struct v4l2_ctrl_config xtpg_ctrls[] = {
+	{
+		.ops	= &xtpg_ctrl_ops,
+		.id	= V4L2_CID_XILINX_TPG_CROSS_HAIRS,
+		.name	= "Test Pattern: Cross Hairs",
+		.type	= V4L2_CTRL_TYPE_BOOLEAN,
+		.min	= false,
+		.max	= true,
+		.step	= 1,
+		.def	= 0,
+	}, {
+		.ops	= &xtpg_ctrl_ops,
+		.id	= V4L2_CID_XILINX_TPG_MOVING_BOX,
+		.name	= "Test Pattern: Moving Box",
+		.type	= V4L2_CTRL_TYPE_BOOLEAN,
+		.min	= false,
+		.max	= true,
+		.step	= 1,
+		.def	= 0,
+	}, {
+		.ops	= &xtpg_ctrl_ops,
+		.id	= V4L2_CID_XILINX_TPG_COLOR_MASK,
+		.name	= "Test Pattern: Color Mask",
+		.type	= V4L2_CTRL_TYPE_BITMASK,
+		.min	= 0,
+		.max	= 0xf,
+		.def	= 0,
+	}, {
+		.ops	= &xtpg_ctrl_ops,
+		.id	= V4L2_CID_XILINX_TPG_STUCK_PIXEL,
+		.name	= "Test Pattern: Stuck Pixel",
+		.type	= V4L2_CTRL_TYPE_BOOLEAN,
+		.min	= false,
+		.max	= true,
+		.step	= 1,
+		.def	= 0,
+	}, {
+		.ops	= &xtpg_ctrl_ops,
+		.id	= V4L2_CID_XILINX_TPG_NOISE,
+		.name	= "Test Pattern: Noise",
+		.type	= V4L2_CTRL_TYPE_BOOLEAN,
+		.min	= false,
+		.max	= true,
+		.step	= 1,
+		.def	= 0,
+	}, {
+		.ops	= &xtpg_ctrl_ops,
+		.id	= V4L2_CID_XILINX_TPG_MOTION,
+		.name	= "Test Pattern: Motion",
+		.type	= V4L2_CTRL_TYPE_BOOLEAN,
+		.min	= false,
+		.max	= true,
+		.step	= 1,
+		.def	= 0,
+	}, {
+		.ops	= &xtpg_ctrl_ops,
+		.id	= V4L2_CID_XILINX_TPG_MOTION_SPEED,
+		.name	= "Test Pattern: Motion Speed",
+		.type	= V4L2_CTRL_TYPE_INTEGER,
+		.min	= 0,
+		.max	= (1 << 8) - 1,
+		.step	= 1,
+		.def	= 4,
+		.flags	= V4L2_CTRL_FLAG_SLIDER,
+	}, {
+		.ops	= &xtpg_ctrl_ops,
+		.id	= V4L2_CID_XILINX_TPG_CROSS_HAIR_ROW,
+		.name	= "Test Pattern: Cross Hairs Row",
+		.type	= V4L2_CTRL_TYPE_INTEGER,
+		.min	= 0,
+		.max	= (1 << 12) - 1,
+		.step	= 1,
+		.def	= 0x64,
+		.flags	= V4L2_CTRL_FLAG_SLIDER,
+	}, {
+		.ops	= &xtpg_ctrl_ops,
+		.id	= V4L2_CID_XILINX_TPG_CROSS_HAIR_COLUMN,
+		.name	= "Test Pattern: Cross Hairs Column",
+		.type	= V4L2_CTRL_TYPE_INTEGER,
+		.min	= 0,
+		.max	= (1 << 12) - 1,
+		.step	= 1,
+		.def	= 0x64,
+		.flags	= V4L2_CTRL_FLAG_SLIDER,
+	}, {
+		.ops	= &xtpg_ctrl_ops,
+		.id	= V4L2_CID_XILINX_TPG_ZPLATE_HOR_START,
+		.name	= "Test Pattern: Zplate Horizontal Start Pos",
+		.type	= V4L2_CTRL_TYPE_INTEGER,
+		.min	= 0,
+		.max	= (1 << 16) - 1,
+		.step	= 1,
+		.def	= 0x1e,
+		.flags	= V4L2_CTRL_FLAG_SLIDER,
+	}, {
+		.ops	= &xtpg_ctrl_ops,
+		.id	= V4L2_CID_XILINX_TPG_ZPLATE_HOR_SPEED,
+		.name	= "Test Pattern: Zplate Horizontal Speed",
+		.type	= V4L2_CTRL_TYPE_INTEGER,
+		.min	= 0,
+		.max	= (1 << 16) - 1,
+		.step	= 1,
+		.def	= 0,
+		.flags	= V4L2_CTRL_FLAG_SLIDER,
+	}, {
+		.ops	= &xtpg_ctrl_ops,
+		.id	= V4L2_CID_XILINX_TPG_ZPLATE_VER_START,
+		.name	= "Test Pattern: Zplate Vertical Start Pos",
+		.type	= V4L2_CTRL_TYPE_INTEGER,
+		.min	= 0,
+		.max	= (1 << 16) - 1,
+		.step	= 1,
+		.def	= 1,
+		.flags	= V4L2_CTRL_FLAG_SLIDER,
+	}, {
+		.ops	= &xtpg_ctrl_ops,
+		.id	= V4L2_CID_XILINX_TPG_ZPLATE_VER_SPEED,
+		.name	= "Test Pattern: Zplate Vertical Speed",
+		.type	= V4L2_CTRL_TYPE_INTEGER,
+		.min	= 0,
+		.max	= (1 << 16) - 1,
+		.step	= 1,
+		.def	= 0,
+		.flags	= V4L2_CTRL_FLAG_SLIDER,
+	}, {
+		.ops	= &xtpg_ctrl_ops,
+		.id	= V4L2_CID_XILINX_TPG_BOX_SIZE,
+		.name	= "Test Pattern: Box Size",
+		.type	= V4L2_CTRL_TYPE_INTEGER,
+		.min	= 0,
+		.max	= (1 << 12) - 1,
+		.step	= 1,
+		.def	= 0x32,
+		.flags	= V4L2_CTRL_FLAG_SLIDER,
+	}, {
+		.ops	= &xtpg_ctrl_ops,
+		.id	= V4L2_CID_XILINX_TPG_BOX_COLOR,
+		.name	= "Test Pattern: Box Color(RGB)",
+		.type	= V4L2_CTRL_TYPE_INTEGER,
+		.min	= 0,
+		.max	= (1 << 24) - 1,
+		.step	= 1,
+		.def	= 0,
+	}, {
+		.ops	= &xtpg_ctrl_ops,
+		.id	= V4L2_CID_XILINX_TPG_STUCK_PIXEL_THRESH,
+		.name	= "Test Pattern: Stuck Pixel threshold",
+		.type	= V4L2_CTRL_TYPE_INTEGER,
+		.min	= 0,
+		.max	= (1 << 16) - 1,
+		.step	= 1,
+		.def	= 0,
+		.flags	= V4L2_CTRL_FLAG_SLIDER,
+	}, {
+		.ops	= &xtpg_ctrl_ops,
+		.id	= V4L2_CID_XILINX_TPG_NOISE_GAIN,
+		.name	= "Test Pattern: Noise Gain",
+		.type	= V4L2_CTRL_TYPE_INTEGER,
+		.min	= 0,
+		.max	= (1 << 8) - 1,
+		.step	= 1,
+		.def	= 0,
+		.flags	= V4L2_CTRL_FLAG_SLIDER,
+	},
+};
+
+/* -----------------------------------------------------------------------------
+ * Media Operations
+ */
+
+static const struct media_entity_operations xtpg_media_ops = {
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+/* -----------------------------------------------------------------------------
+ * Power Management
+ */
+
+static int __maybe_unused xtpg_pm_suspend(struct device *dev)
+{
+	struct xtpg_device *xtpg = dev_get_drvdata(dev);
+
+	xvip_suspend(&xtpg->xvip);
+
+	return 0;
+}
+
+static int __maybe_unused xtpg_pm_resume(struct device *dev)
+{
+	struct xtpg_device *xtpg = dev_get_drvdata(dev);
+
+	xvip_resume(&xtpg->xvip);
+
+	return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * Platform Device Driver
+ */
+
+static int xtpg_parse_of(struct xtpg_device *xtpg)
+{
+	struct device *dev = xtpg->xvip.dev;
+	struct device_node *node = xtpg->xvip.dev->of_node;
+	struct device_node *ports;
+	struct device_node *port;
+	unsigned int nports = 0;
+	bool has_endpoint = false;
+
+	ports = of_get_child_by_name(node, "ports");
+	if (ports == NULL)
+		ports = node;
+
+	for_each_child_of_node(ports, port) {
+		const struct xvip_video_format *format;
+		struct device_node *endpoint;
+
+		if (!of_node_name_eq(port, "port"))
+			continue;
+
+		format = xvip_of_get_format(port);
+		if (IS_ERR(format)) {
+			dev_err(dev, "invalid format in DT");
+			of_node_put(port);
+			return PTR_ERR(format);
+		}
+
+		/* Get and check the format description */
+		if (!xtpg->vip_format) {
+			xtpg->vip_format = format;
+		} else if (xtpg->vip_format != format) {
+			dev_err(dev, "in/out format mismatch in DT");
+			of_node_put(port);
+			return -EINVAL;
+		}
+
+		if (nports == 0) {
+			endpoint = of_get_next_child(port, NULL);
+			if (endpoint)
+				has_endpoint = true;
+			of_node_put(endpoint);
+		}
+
+		/* Count the number of ports. */
+		nports++;
+	}
+
+	if (nports != 1 && nports != 2) {
+		dev_err(dev, "invalid number of ports %u\n", nports);
+		return -EINVAL;
+	}
+
+	xtpg->npads = nports;
+	if (nports == 2 && has_endpoint)
+		xtpg->has_input = true;
+
+	return 0;
+}
+
+static int xtpg_probe(struct platform_device *pdev)
+{
+	struct v4l2_subdev *subdev;
+	struct xtpg_device *xtpg;
+	u32 i, bayer_phase;
+	int ret;
+
+	xtpg = devm_kzalloc(&pdev->dev, sizeof(*xtpg), GFP_KERNEL);
+	if (!xtpg)
+		return -ENOMEM;
+
+	xtpg->xvip.dev = &pdev->dev;
+
+	ret = xtpg_parse_of(xtpg);
+	if (ret < 0)
+		return ret;
+
+	ret = xvip_init_resources(&xtpg->xvip);
+	if (ret < 0)
+		return ret;
+
+	xtpg->vtmux_gpio = devm_gpiod_get_optional(&pdev->dev, "timing",
+						   GPIOD_OUT_HIGH);
+	if (IS_ERR(xtpg->vtmux_gpio)) {
+		ret = PTR_ERR(xtpg->vtmux_gpio);
+		goto error_resource;
+	}
+
+	xtpg->vtc = xvtc_of_get(pdev->dev.of_node);
+	if (IS_ERR(xtpg->vtc)) {
+		ret = PTR_ERR(xtpg->vtc);
+		goto error_resource;
+	}
+
+	/* Reset and initialize the core */
+	xvip_reset(&xtpg->xvip);
+
+	/* Initialize V4L2 subdevice and media entity. Pad numbers depend on the
+	 * number of pads.
+	 */
+	if (xtpg->npads == 2) {
+		xtpg->pads[0].flags = MEDIA_PAD_FL_SINK;
+		xtpg->pads[1].flags = MEDIA_PAD_FL_SOURCE;
+	} else {
+		xtpg->pads[0].flags = MEDIA_PAD_FL_SOURCE;
+	}
+
+	/* Initialize the default format */
+	xtpg->default_format.code = xtpg->vip_format->code;
+	xtpg->default_format.field = V4L2_FIELD_NONE;
+	xtpg->default_format.colorspace = V4L2_COLORSPACE_SRGB;
+	xvip_get_frame_size(&xtpg->xvip, &xtpg->default_format);
+
+	bayer_phase = xtpg_get_bayer_phase(xtpg->vip_format->code);
+	if (bayer_phase != XTPG_BAYER_PHASE_OFF)
+		xtpg->bayer = true;
+
+	xtpg->formats[0] = xtpg->default_format;
+	if (xtpg->npads == 2)
+		xtpg->formats[1] = xtpg->default_format;
+
+	/* Initialize V4L2 subdevice and media entity */
+	subdev = &xtpg->xvip.subdev;
+	v4l2_subdev_init(subdev, &xtpg_ops);
+	subdev->dev = &pdev->dev;
+	subdev->internal_ops = &xtpg_internal_ops;
+	strscpy(subdev->name, dev_name(&pdev->dev), sizeof(subdev->name));
+	v4l2_set_subdevdata(subdev, xtpg);
+	subdev->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	subdev->entity.ops = &xtpg_media_ops;
+
+	ret = media_entity_pads_init(&subdev->entity, xtpg->npads, xtpg->pads);
+	if (ret < 0)
+		goto error;
+
+	v4l2_ctrl_handler_init(&xtpg->ctrl_handler, 3 + ARRAY_SIZE(xtpg_ctrls));
+
+	xtpg->vblank = v4l2_ctrl_new_std(&xtpg->ctrl_handler, &xtpg_ctrl_ops,
+					 V4L2_CID_VBLANK, XTPG_MIN_VBLANK,
+					 XTPG_MAX_VBLANK, 1, 100);
+	xtpg->hblank = v4l2_ctrl_new_std(&xtpg->ctrl_handler, &xtpg_ctrl_ops,
+					 V4L2_CID_HBLANK, XTPG_MIN_HBLANK,
+					 XTPG_MAX_HBLANK, 1, 100);
+	xtpg->pattern = v4l2_ctrl_new_std_menu_items(&xtpg->ctrl_handler,
+					&xtpg_ctrl_ops, V4L2_CID_TEST_PATTERN,
+					ARRAY_SIZE(xtpg_pattern_strings) - 1,
+					1, 9, xtpg_pattern_strings);
+
+	for (i = 0; i < ARRAY_SIZE(xtpg_ctrls); i++)
+		v4l2_ctrl_new_custom(&xtpg->ctrl_handler, &xtpg_ctrls[i], NULL);
+
+	if (xtpg->ctrl_handler.error) {
+		dev_err(&pdev->dev, "failed to add controls\n");
+		ret = xtpg->ctrl_handler.error;
+		goto error;
+	}
+	subdev->ctrl_handler = &xtpg->ctrl_handler;
+
+	xtpg_update_pattern_control(xtpg, true, true);
+
+	ret = v4l2_ctrl_handler_setup(&xtpg->ctrl_handler);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to set controls\n");
+		goto error;
+	}
+
+	platform_set_drvdata(pdev, xtpg);
+
+	xvip_print_version(&xtpg->xvip);
+
+	ret = v4l2_async_register_subdev(subdev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to register subdev\n");
+		goto error;
+	}
+
+	return 0;
+
+error:
+	v4l2_ctrl_handler_free(&xtpg->ctrl_handler);
+	media_entity_cleanup(&subdev->entity);
+	xvtc_put(xtpg->vtc);
+error_resource:
+	xvip_cleanup_resources(&xtpg->xvip);
+	return ret;
+}
+
+static int xtpg_remove(struct platform_device *pdev)
+{
+	struct xtpg_device *xtpg = platform_get_drvdata(pdev);
+	struct v4l2_subdev *subdev = &xtpg->xvip.subdev;
+
+	v4l2_async_unregister_subdev(subdev);
+	v4l2_ctrl_handler_free(&xtpg->ctrl_handler);
+	media_entity_cleanup(&subdev->entity);
+
+	xvip_cleanup_resources(&xtpg->xvip);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(xtpg_pm_ops, xtpg_pm_suspend, xtpg_pm_resume);
+
+static const struct of_device_id xtpg_of_id_table[] = {
+	{ .compatible = "xlnx,v-tpg-5.0" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, xtpg_of_id_table);
+
+static struct platform_driver xtpg_driver = {
+	.driver = {
+		.name		= "xilinx-tpg",
+		.pm		= &xtpg_pm_ops,
+		.of_match_table	= xtpg_of_id_table,
+	},
+	.probe			= xtpg_probe,
+	.remove			= xtpg_remove,
+};
+
+module_platform_driver(xtpg_driver);
+
+MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
+MODULE_DESCRIPTION("Xilinx Test Pattern Generator Driver");
+MODULE_LICENSE("GPL v2");