Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 417 insertions, 0 deletions

diff --git a/drivers/media/radio/saa7706h.c b/drivers/media/radio/saa7706h.c
new file mode 100644
index 000000000..3c758a983
--- /dev/null
+++ b/drivers/media/radio/saa7706h.c
@@ -0,0 +1,417 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * saa7706.c Philips SAA7706H Car Radio DSP driver
+ * Copyright (c) 2009 Intel Corporation
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
+
+#define DRIVER_NAME "saa7706h"
+
+/* the I2C memory map looks like this
+
+	$1C00 - $FFFF Not Used
+	$2200 - $3FFF Reserved YRAM (DSP2) space
+	$2000 - $21FF YRAM (DSP2)
+	$1FF0 - $1FFF Hardware Registers
+	$1280 - $1FEF Reserved XRAM (DSP2) space
+	$1000 - $127F XRAM (DSP2)
+	$0FFF        DSP CONTROL
+	$0A00 - $0FFE Reserved
+	$0980 - $09FF Reserved YRAM (DSP1) space
+	$0800 - $097F YRAM (DSP1)
+	$0200 - $07FF Not Used
+	$0180 - $01FF Reserved XRAM (DSP1) space
+	$0000 - $017F XRAM (DSP1)
+*/
+
+#define SAA7706H_REG_CTRL		0x0fff
+#define SAA7706H_CTRL_BYP_PLL		0x0001
+#define SAA7706H_CTRL_PLL_DIV_MASK	0x003e
+#define SAA7706H_CTRL_PLL3_62975MHZ	0x003e
+#define SAA7706H_CTRL_DSP_TURBO		0x0040
+#define SAA7706H_CTRL_PC_RESET_DSP1	0x0080
+#define SAA7706H_CTRL_PC_RESET_DSP2	0x0100
+#define SAA7706H_CTRL_DSP1_ROM_EN_MASK	0x0600
+#define SAA7706H_CTRL_DSP1_FUNC_PROM	0x0000
+#define SAA7706H_CTRL_DSP2_ROM_EN_MASK	0x1800
+#define SAA7706H_CTRL_DSP2_FUNC_PROM	0x0000
+#define SAA7706H_CTRL_DIG_SIL_INTERPOL	0x8000
+
+#define SAA7706H_REG_EVALUATION			0x1ff0
+#define SAA7706H_EVAL_DISABLE_CHARGE_PUMP	0x000001
+#define SAA7706H_EVAL_DCS_CLOCK			0x000002
+#define SAA7706H_EVAL_GNDRC1_ENABLE		0x000004
+#define SAA7706H_EVAL_GNDRC2_ENABLE		0x000008
+
+#define SAA7706H_REG_CL_GEN1			0x1ff3
+#define SAA7706H_CL_GEN1_MIN_LOOPGAIN_MASK	0x00000f
+#define SAA7706H_CL_GEN1_LOOPGAIN_MASK		0x0000f0
+#define SAA7706H_CL_GEN1_COARSE_RATION		0xffff00
+
+#define SAA7706H_REG_CL_GEN2			0x1ff4
+#define SAA7706H_CL_GEN2_WSEDGE_FALLING		0x000001
+#define SAA7706H_CL_GEN2_STOP_VCO		0x000002
+#define SAA7706H_CL_GEN2_FRERUN			0x000004
+#define SAA7706H_CL_GEN2_ADAPTIVE		0x000008
+#define SAA7706H_CL_GEN2_FINE_RATIO_MASK	0x0ffff0
+
+#define SAA7706H_REG_CL_GEN4		0x1ff6
+#define SAA7706H_CL_GEN4_BYPASS_PLL1	0x001000
+#define SAA7706H_CL_GEN4_PLL1_DIV_MASK	0x03e000
+#define SAA7706H_CL_GEN4_DSP1_TURBO	0x040000
+
+#define SAA7706H_REG_SEL	0x1ff7
+#define SAA7706H_SEL_DSP2_SRCA_MASK	0x000007
+#define SAA7706H_SEL_DSP2_FMTA_MASK	0x000031
+#define SAA7706H_SEL_DSP2_SRCB_MASK	0x0001c0
+#define SAA7706H_SEL_DSP2_FMTB_MASK	0x000e00
+#define SAA7706H_SEL_DSP1_SRC_MASK	0x003000
+#define SAA7706H_SEL_DSP1_FMT_MASK	0x01c003
+#define SAA7706H_SEL_SPDIF2		0x020000
+#define SAA7706H_SEL_HOST_IO_FMT_MASK	0x1c0000
+#define SAA7706H_SEL_EN_HOST_IO		0x200000
+
+#define SAA7706H_REG_IAC		0x1ff8
+#define SAA7706H_REG_CLK_SET		0x1ff9
+#define SAA7706H_REG_CLK_COEFF		0x1ffa
+#define SAA7706H_REG_INPUT_SENS		0x1ffb
+#define SAA7706H_INPUT_SENS_RDS_VOL_MASK	0x0003f
+#define SAA7706H_INPUT_SENS_FM_VOL_MASK		0x00fc0
+#define SAA7706H_INPUT_SENS_FM_MPX		0x01000
+#define SAA7706H_INPUT_SENS_OFF_FILTER_A_EN	0x02000
+#define SAA7706H_INPUT_SENS_OFF_FILTER_B_EN	0x04000
+#define SAA7706H_REG_PHONE_NAV_AUDIO	0x1ffc
+#define SAA7706H_REG_IO_CONF_DSP2	0x1ffd
+#define SAA7706H_REG_STATUS_DSP2	0x1ffe
+#define SAA7706H_REG_PC_DSP2		0x1fff
+
+#define SAA7706H_DSP1_MOD0	0x0800
+#define SAA7706H_DSP1_ROM_VER	0x097f
+#define SAA7706H_DSP2_MPTR0	0x1000
+
+#define SAA7706H_DSP1_MODPNTR	0x0000
+
+#define SAA7706H_DSP2_XMEM_CONTLLCW	0x113e
+#define SAA7706H_DSP2_XMEM_BUSAMP	0x114a
+#define SAA7706H_DSP2_XMEM_FDACPNTR	0x11f9
+#define SAA7706H_DSP2_XMEM_IIS1PNTR	0x11fb
+
+#define SAA7706H_DSP2_YMEM_PVGA		0x212a
+#define SAA7706H_DSP2_YMEM_PVAT1	0x212b
+#define SAA7706H_DSP2_YMEM_PVAT		0x212c
+#define SAA7706H_DSP2_YMEM_ROM_VER	0x21ff
+
+#define SUPPORTED_DSP1_ROM_VER		0x667
+
+struct saa7706h_state {
+	struct v4l2_subdev sd;
+	struct v4l2_ctrl_handler hdl;
+	unsigned muted;
+};
+
+static inline struct saa7706h_state *to_state(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct saa7706h_state, sd);
+}
+
+static int saa7706h_i2c_send(struct i2c_client *client, const u8 *data, int len)
+{
+	int err = i2c_master_send(client, data, len);
+	if (err == len)
+		return 0;
+	return err > 0 ? -EIO : err;
+}
+
+static int saa7706h_i2c_transfer(struct i2c_client *client,
+	struct i2c_msg *msgs, int num)
+{
+	int err = i2c_transfer(client->adapter, msgs, num);
+	if (err == num)
+		return 0;
+	return err > 0 ? -EIO : err;
+}
+
+static int saa7706h_set_reg24(struct v4l2_subdev *sd, u16 reg, u32 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	u8 buf[5];
+	int pos = 0;
+
+	buf[pos++] = reg >> 8;
+	buf[pos++] = reg;
+	buf[pos++] = val >> 16;
+	buf[pos++] = val >> 8;
+	buf[pos++] = val;
+
+	return saa7706h_i2c_send(client, buf, pos);
+}
+
+static int saa7706h_set_reg24_err(struct v4l2_subdev *sd, u16 reg, u32 val,
+	int *err)
+{
+	return *err ? *err : saa7706h_set_reg24(sd, reg, val);
+}
+
+static int saa7706h_set_reg16(struct v4l2_subdev *sd, u16 reg, u16 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	u8 buf[4];
+	int pos = 0;
+
+	buf[pos++] = reg >> 8;
+	buf[pos++] = reg;
+	buf[pos++] = val >> 8;
+	buf[pos++] = val;
+
+	return saa7706h_i2c_send(client, buf, pos);
+}
+
+static int saa7706h_set_reg16_err(struct v4l2_subdev *sd, u16 reg, u16 val,
+	int *err)
+{
+	return *err ? *err : saa7706h_set_reg16(sd, reg, val);
+}
+
+static int saa7706h_get_reg16(struct v4l2_subdev *sd, u16 reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	u8 buf[2];
+	int err;
+	u8 regaddr[] = {reg >> 8, reg};
+	struct i2c_msg msg[] = {
+					{
+						.addr = client->addr,
+						.len = sizeof(regaddr),
+						.buf = regaddr
+					},
+					{
+						.addr = client->addr,
+						.flags = I2C_M_RD,
+						.len = sizeof(buf),
+						.buf = buf
+					}
+				};
+
+	err = saa7706h_i2c_transfer(client, msg, ARRAY_SIZE(msg));
+	if (err)
+		return err;
+
+	return buf[0] << 8 | buf[1];
+}
+
+static int saa7706h_unmute(struct v4l2_subdev *sd)
+{
+	struct saa7706h_state *state = to_state(sd);
+	int err = 0;
+
+	err = saa7706h_set_reg16_err(sd, SAA7706H_REG_CTRL,
+		SAA7706H_CTRL_PLL3_62975MHZ | SAA7706H_CTRL_PC_RESET_DSP1 |
+		SAA7706H_CTRL_PC_RESET_DSP2, &err);
+
+	/* newer versions of the chip requires a small sleep after reset */
+	msleep(1);
+
+	err = saa7706h_set_reg16_err(sd, SAA7706H_REG_CTRL,
+		SAA7706H_CTRL_PLL3_62975MHZ, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_EVALUATION, 0, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN1, 0x040022, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN2,
+		SAA7706H_CL_GEN2_WSEDGE_FALLING, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN4, 0x024080, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_SEL, 0x200080, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_IAC, 0xf4caed, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CLK_SET, 0x124334, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CLK_COEFF, 0x004a1a,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_INPUT_SENS, 0x0071c7,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_PHONE_NAV_AUDIO,
+		0x0e22ff, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_IO_CONF_DSP2, 0x001ff8,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_STATUS_DSP2, 0x080003,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_PC_DSP2, 0x000004, &err);
+
+	err = saa7706h_set_reg16_err(sd, SAA7706H_DSP1_MOD0, 0x0c6c, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_MPTR0, 0x000b4b, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP1_MODPNTR, 0x000600, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP1_MODPNTR, 0x0000c0, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x000819,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x00085a,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_BUSAMP, 0x7fffff,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_FDACPNTR, 0x2000cb,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_IIS1PNTR, 0x2000cb,
+		&err);
+
+	err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVGA, 0x0f80, &err);
+
+	err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVAT1, 0x0800,
+		&err);
+
+	err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVAT, 0x0800, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x000905,
+		&err);
+	if (!err)
+		state->muted = 0;
+	return err;
+}
+
+static int saa7706h_mute(struct v4l2_subdev *sd)
+{
+	struct saa7706h_state *state = to_state(sd);
+	int err;
+
+	err = saa7706h_set_reg16(sd, SAA7706H_REG_CTRL,
+		SAA7706H_CTRL_PLL3_62975MHZ | SAA7706H_CTRL_PC_RESET_DSP1 |
+		SAA7706H_CTRL_PC_RESET_DSP2);
+	if (!err)
+		state->muted = 1;
+	return err;
+}
+
+static int saa7706h_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct saa7706h_state *state =
+		container_of(ctrl->handler, struct saa7706h_state, hdl);
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		if (ctrl->val)
+			return saa7706h_mute(&state->sd);
+		return saa7706h_unmute(&state->sd);
+	}
+	return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops saa7706h_ctrl_ops = {
+	.s_ctrl = saa7706h_s_ctrl,
+};
+
+static const struct v4l2_subdev_ops empty_ops = {};
+
+/*
+ * Generic i2c probe
+ * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
+ */
+
+static int saa7706h_probe(struct i2c_client *client)
+{
+	struct saa7706h_state *state;
+	struct v4l2_subdev *sd;
+	int err;
+
+	/* Check if the adapter supports the needed features */
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+
+	v4l_info(client, "chip found @ 0x%02x (%s)\n",
+			client->addr << 1, client->adapter->name);
+
+	state = kzalloc(sizeof(struct saa7706h_state), GFP_KERNEL);
+	if (state == NULL)
+		return -ENOMEM;
+	sd = &state->sd;
+	v4l2_i2c_subdev_init(sd, client, &empty_ops);
+
+	v4l2_ctrl_handler_init(&state->hdl, 4);
+	v4l2_ctrl_new_std(&state->hdl, &saa7706h_ctrl_ops,
+			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+	sd->ctrl_handler = &state->hdl;
+	err = state->hdl.error;
+	if (err)
+		goto err;
+
+	/* check the rom versions */
+	err = saa7706h_get_reg16(sd, SAA7706H_DSP1_ROM_VER);
+	if (err < 0)
+		goto err;
+	if (err != SUPPORTED_DSP1_ROM_VER)
+		v4l2_warn(sd, "Unknown DSP1 ROM code version: 0x%x\n", err);
+	state->muted = 1;
+
+	/* startup in a muted state */
+	err = saa7706h_mute(sd);
+	if (err)
+		goto err;
+
+	return 0;
+
+err:
+	v4l2_device_unregister_subdev(sd);
+	v4l2_ctrl_handler_free(&state->hdl);
+	kfree(to_state(sd));
+
+	printk(KERN_ERR DRIVER_NAME ": Failed to probe: %d\n", err);
+
+	return err;
+}
+
+static void saa7706h_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct saa7706h_state *state = to_state(sd);
+
+	saa7706h_mute(sd);
+	v4l2_device_unregister_subdev(sd);
+	v4l2_ctrl_handler_free(&state->hdl);
+	kfree(to_state(sd));
+}
+
+static const struct i2c_device_id saa7706h_id[] = {
+	{DRIVER_NAME, 0},
+	{},
+};
+
+MODULE_DEVICE_TABLE(i2c, saa7706h_id);
+
+static struct i2c_driver saa7706h_driver = {
+	.driver = {
+		.name	= DRIVER_NAME,
+	},
+	.probe_new	= saa7706h_probe,
+	.remove		= saa7706h_remove,
+	.id_table	= saa7706h_id,
+};
+
+module_i2c_driver(saa7706h_driver);
+
+MODULE_DESCRIPTION("SAA7706H Car Radio DSP driver");
+MODULE_AUTHOR("Mocean Laboratories");
+MODULE_LICENSE("GPL v2");