Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 236 insertions, 0 deletions

diff --git a/drivers/media/rc/ene_ir.h b/drivers/media/rc/ene_ir.h
new file mode 100644
index 000000000..c1c44e86e
--- /dev/null
+++ b/drivers/media/rc/ene_ir.h
@@ -0,0 +1,236 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * driver for ENE KB3926 B/C/D/E/F CIR (also known as ENE0XXX)
+ *
+ * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
+ */
+#include <linux/spinlock.h>
+
+
+/* hardware address */
+#define ENE_STATUS		0	/* hardware status - unused */
+#define ENE_ADDR_HI		1	/* hi byte of register address */
+#define ENE_ADDR_LO		2	/* low byte of register address */
+#define ENE_IO			3	/* read/write window */
+#define ENE_IO_SIZE		4
+
+/* 8 bytes of samples, divided in 2 packets*/
+#define ENE_FW_SAMPLE_BUFFER	0xF8F0	/* sample buffer */
+#define ENE_FW_SAMPLE_SPACE	0x80	/* sample is space */
+#define ENE_FW_PACKET_SIZE	4
+
+/* first firmware flag register */
+#define ENE_FW1			0xF8F8  /* flagr */
+#define	ENE_FW1_ENABLE		0x01	/* enable fw processing */
+#define ENE_FW1_TXIRQ		0x02	/* TX interrupt pending */
+#define ENE_FW1_HAS_EXTRA_BUF	0x04	/* fw uses extra buffer*/
+#define ENE_FW1_EXTRA_BUF_HND	0x08	/* extra buffer handshake bit*/
+#define ENE_FW1_LED_ON		0x10	/* turn on a led */
+
+#define ENE_FW1_WPATTERN	0x20	/* enable wake pattern */
+#define ENE_FW1_WAKE		0x40	/* enable wake from S3 */
+#define ENE_FW1_IRQ		0x80	/* enable interrupt */
+
+/* second firmware flag register */
+#define ENE_FW2			0xF8F9  /* flagw */
+#define ENE_FW2_BUF_WPTR	0x01	/* which half of the buffer to read */
+#define ENE_FW2_RXIRQ		0x04	/* RX IRQ pending*/
+#define ENE_FW2_GP0A		0x08	/* Use GPIO0A for demodulated input */
+#define ENE_FW2_EMMITER1_CONN	0x10	/* TX emmiter 1 connected */
+#define ENE_FW2_EMMITER2_CONN	0x20	/* TX emmiter 2 connected */
+
+#define ENE_FW2_FAN_INPUT	0x40	/* fan input used for demodulated data*/
+#define ENE_FW2_LEARNING	0x80	/* hardware supports learning and TX */
+
+/* firmware RX pointer for new style buffer */
+#define ENE_FW_RX_POINTER	0xF8FA
+
+/* high parts of samples for fan input (8 samples)*/
+#define ENE_FW_SMPL_BUF_FAN	0xF8FB
+#define ENE_FW_SMPL_BUF_FAN_PLS	0x8000	/* combined sample is pulse */
+#define ENE_FW_SMPL_BUF_FAN_MSK	0x0FFF  /* combined sample maximum value */
+#define ENE_FW_SAMPLE_PERIOD_FAN 61	/* fan input has fixed sample period */
+
+/* transmitter ports */
+#define ENE_GPIOFS1		0xFC01
+#define ENE_GPIOFS1_GPIO0D	0x20	/* enable tx output on GPIO0D */
+#define ENE_GPIOFS8		0xFC08
+#define ENE_GPIOFS8_GPIO41	0x02	/* enable tx output on GPIO40 */
+
+/* IRQ registers block (for revision B) */
+#define ENEB_IRQ		0xFD09	/* IRQ number */
+#define ENEB_IRQ_UNK1		0xFD17	/* unknown setting = 1 */
+#define ENEB_IRQ_STATUS		0xFD80	/* irq status */
+#define ENEB_IRQ_STATUS_IR	0x20	/* IR irq */
+
+/* fan as input settings */
+#define ENE_FAN_AS_IN1		0xFE30  /* fan init reg 1 */
+#define ENE_FAN_AS_IN1_EN	0xCD
+#define ENE_FAN_AS_IN2		0xFE31  /* fan init reg 2 */
+#define ENE_FAN_AS_IN2_EN	0x03
+
+/* IRQ registers block (for revision C,D) */
+#define ENE_IRQ			0xFE9B	/* new irq settings register */
+#define ENE_IRQ_MASK		0x0F	/* irq number mask */
+#define ENE_IRQ_UNK_EN		0x10	/* always enabled */
+#define ENE_IRQ_STATUS		0x20	/* irq status and ACK */
+
+/* CIR Config register #1 */
+#define ENE_CIRCFG		0xFEC0
+#define ENE_CIRCFG_RX_EN	0x01	/* RX enable */
+#define ENE_CIRCFG_RX_IRQ	0x02	/* Enable hardware interrupt */
+#define ENE_CIRCFG_REV_POL	0x04	/* Input polarity reversed */
+#define ENE_CIRCFG_CARR_DEMOD	0x08	/* Enable carrier demodulator */
+
+#define ENE_CIRCFG_TX_EN	0x10	/* TX enable */
+#define ENE_CIRCFG_TX_IRQ	0x20	/* Send interrupt on TX done */
+#define ENE_CIRCFG_TX_POL_REV	0x40	/* TX polarity reversed */
+#define ENE_CIRCFG_TX_CARR	0x80	/* send TX carrier or not */
+
+/* CIR config register #2 */
+#define ENE_CIRCFG2		0xFEC1
+#define ENE_CIRCFG2_RLC		0x00
+#define ENE_CIRCFG2_RC5		0x01
+#define ENE_CIRCFG2_RC6		0x02
+#define ENE_CIRCFG2_NEC		0x03
+#define ENE_CIRCFG2_CARR_DETECT	0x10	/* Enable carrier detection */
+#define ENE_CIRCFG2_GPIO0A	0x20	/* Use GPIO0A instead of GPIO40 for input */
+#define ENE_CIRCFG2_FAST_SAMPL1	0x40	/* Fast leading pulse detection for RC6 */
+#define ENE_CIRCFG2_FAST_SAMPL2	0x80	/* Fast data detection for RC6 */
+
+/* Knobs for protocol decoding - will document when/if will use them */
+#define ENE_CIRPF		0xFEC2
+#define ENE_CIRHIGH		0xFEC3
+#define ENE_CIRBIT		0xFEC4
+#define ENE_CIRSTART		0xFEC5
+#define ENE_CIRSTART2		0xFEC6
+
+/* Actual register which contains RLC RX data - read by firmware */
+#define ENE_CIRDAT_IN		0xFEC7
+
+
+/* RLC configuration - sample period (1us resolution) + idle mode */
+#define ENE_CIRRLC_CFG		0xFEC8
+#define ENE_CIRRLC_CFG_OVERFLOW	0x80	/* interrupt on overflows if set */
+#define ENE_DEFAULT_SAMPLE_PERIOD 50
+
+/* Two byte RLC TX buffer */
+#define ENE_CIRRLC_OUT0		0xFEC9
+#define ENE_CIRRLC_OUT1		0xFECA
+#define ENE_CIRRLC_OUT_PULSE	0x80	/* Transmitted sample is pulse */
+#define ENE_CIRRLC_OUT_MASK	0x7F
+
+
+/* Carrier detect setting
+ * Low nibble  - number of carrier pulses to average
+ * High nibble - number of initial carrier pulses to discard
+ */
+#define ENE_CIRCAR_PULS		0xFECB
+
+/* detected RX carrier period (resolution: 500 ns) */
+#define ENE_CIRCAR_PRD		0xFECC
+#define ENE_CIRCAR_PRD_VALID	0x80	/* data valid content valid */
+
+/* detected RX carrier pulse width (resolution: 500 ns) */
+#define ENE_CIRCAR_HPRD		0xFECD
+
+/* TX period (resolution: 500 ns, minimum 2)*/
+#define ENE_CIRMOD_PRD		0xFECE
+#define ENE_CIRMOD_PRD_POL	0x80	/* TX carrier polarity*/
+
+#define ENE_CIRMOD_PRD_MAX	0x7F	/* 15.87 kHz */
+#define ENE_CIRMOD_PRD_MIN	0x02	/* 1 Mhz */
+
+/* TX pulse width (resolution: 500 ns)*/
+#define ENE_CIRMOD_HPRD		0xFECF
+
+/* Hardware versions */
+#define ENE_ECHV		0xFF00	/* hardware revision */
+#define ENE_PLLFRH		0xFF16
+#define ENE_PLLFRL		0xFF17
+#define ENE_DEFAULT_PLL_FREQ	1000
+
+#define ENE_ECSTS		0xFF1D
+#define ENE_ECSTS_RSRVD		0x04
+
+#define ENE_ECVER_MAJOR		0xFF1E	/* chip version */
+#define ENE_ECVER_MINOR		0xFF1F
+#define ENE_HW_VER_OLD		0xFD00
+
+/******************************************************************************/
+
+#define ENE_DRIVER_NAME		"ene_ir"
+
+#define ENE_IRQ_RX		1
+#define ENE_IRQ_TX		2
+
+#define  ENE_HW_B		1	/* 3926B */
+#define  ENE_HW_C		2	/* 3926C */
+#define  ENE_HW_D		3	/* 3926D or later */
+
+#define __dbg(level, format, ...)				\
+do {								\
+	if (debug >= level)					\
+		pr_info(format "\n", ## __VA_ARGS__);		\
+} while (0)
+
+#define dbg(format, ...)		__dbg(1, format, ## __VA_ARGS__)
+#define dbg_verbose(format, ...)	__dbg(2, format, ## __VA_ARGS__)
+#define dbg_regs(format, ...)		__dbg(3, format, ## __VA_ARGS__)
+
+struct ene_device {
+	struct pnp_dev *pnp_dev;
+	struct rc_dev *rdev;
+
+	/* hw IO settings */
+	long hw_io;
+	int irq;
+	spinlock_t hw_lock;
+
+	/* HW features */
+	int hw_revision;			/* hardware revision */
+	bool hw_use_gpio_0a;			/* gpio0a is demodulated input*/
+	bool hw_extra_buffer;			/* hardware has 'extra buffer' */
+	bool hw_fan_input;			/* fan input is IR data source */
+	bool hw_learning_and_tx_capable;	/* learning & tx capable */
+	int  pll_freq;
+	int buffer_len;
+
+	/* Extra RX buffer location */
+	int extra_buf1_address;
+	int extra_buf1_len;
+	int extra_buf2_address;
+	int extra_buf2_len;
+
+	/* HW state*/
+	int r_pointer;				/* pointer to next sample to read */
+	int w_pointer;				/* pointer to next sample hw will write */
+	bool rx_fan_input_inuse;		/* is fan input in use for rx*/
+	int tx_reg;				/* current reg used for TX */
+	u8  saved_conf1;			/* saved FEC0 reg */
+	unsigned int tx_sample;			/* current sample for TX */
+	bool tx_sample_pulse;			/* current sample is pulse */
+
+	/* TX buffer */
+	unsigned *tx_buffer;			/* input samples buffer*/
+	int tx_pos;				/* position in that buffer */
+	int tx_len;				/* current len of tx buffer */
+	int tx_done;				/* done transmitting */
+						/* one more sample pending*/
+	struct completion tx_complete;		/* TX completion */
+	struct timer_list tx_sim_timer;
+
+	/* TX settings */
+	int tx_period;
+	int tx_duty_cycle;
+	int transmitter_mask;
+
+	/* RX settings */
+	bool learning_mode_enabled;		/* learning input enabled */
+	bool carrier_detect_enabled;		/* carrier detect enabled */
+	int rx_period_adjust;
+	bool rx_enabled;
+};
+
+static int ene_irq_status(struct ene_device *dev);
+static void ene_rx_read_hw_pointer(struct ene_device *dev);