Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 217 insertions, 0 deletions

diff --git a/drivers/media/rc/imon_raw.c b/drivers/media/rc/imon_raw.c
new file mode 100644
index 000000000..b02ded52f
--- /dev/null
+++ b/drivers/media/rc/imon_raw.c
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2018 Sean Young <sean@mess.org>
+
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+#include <media/rc-core.h>
+
+/* Each bit is 250us */
+#define BIT_DURATION 250
+
+struct imon {
+	struct device *dev;
+	struct urb *ir_urb;
+	struct rc_dev *rcdev;
+	__be64 *ir_buf;
+	char phys[64];
+};
+
+/*
+ * The first 5 bytes of data represent IR pulse or space. Each bit, starting
+ * from highest bit in the first byte, represents 250µs of data. It is 1
+ * for space and 0 for pulse.
+ *
+ * The station sends 10 packets, and the 7th byte will be number 1 to 10, so
+ * when we receive 10 we assume all the data has arrived.
+ */
+static void imon_ir_data(struct imon *imon)
+{
+	struct ir_raw_event rawir = {};
+	u64 data = be64_to_cpup(imon->ir_buf);
+	u8 packet_no = data & 0xff;
+	int offset = 40;
+	int bit;
+
+	if (packet_no == 0xff)
+		return;
+
+	dev_dbg(imon->dev, "data: %*ph", 8, imon->ir_buf);
+
+	/*
+	 * Only the first 5 bytes contain IR data. Right shift so we move
+	 * the IR bits to the lower 40 bits.
+	 */
+	data >>= 24;
+
+	do {
+		/*
+		 * Find highest set bit which is less or equal to offset
+		 *
+		 * offset is the bit above (base 0) where we start looking.
+		 *
+		 * data & (BIT_ULL(offset) - 1) masks off any unwanted bits,
+		 * so we have just bits less than offset.
+		 *
+		 * fls will tell us the highest bit set plus 1 (or 0 if no
+		 * bits are set).
+		 */
+		rawir.pulse = !rawir.pulse;
+		bit = fls64(data & (BIT_ULL(offset) - 1));
+		if (bit < offset) {
+			dev_dbg(imon->dev, "%s: %d bits",
+				rawir.pulse ? "pulse" : "space", offset - bit);
+			rawir.duration = (offset - bit) * BIT_DURATION;
+			ir_raw_event_store_with_filter(imon->rcdev, &rawir);
+
+			offset = bit;
+		}
+
+		data = ~data;
+	} while (offset > 0);
+
+	if (packet_no == 0x0a && !imon->rcdev->idle) {
+		ir_raw_event_set_idle(imon->rcdev, true);
+		ir_raw_event_handle(imon->rcdev);
+	}
+}
+
+static void imon_ir_rx(struct urb *urb)
+{
+	struct imon *imon = urb->context;
+	int ret;
+
+	switch (urb->status) {
+	case 0:
+		imon_ir_data(imon);
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		usb_unlink_urb(urb);
+		return;
+	case -EPIPE:
+	default:
+		dev_dbg(imon->dev, "error: urb status = %d", urb->status);
+		break;
+	}
+
+	ret = usb_submit_urb(urb, GFP_ATOMIC);
+	if (ret && ret != -ENODEV)
+		dev_warn(imon->dev, "failed to resubmit urb: %d", ret);
+}
+
+static int imon_probe(struct usb_interface *intf,
+		      const struct usb_device_id *id)
+{
+	struct usb_endpoint_descriptor *ir_ep = NULL;
+	struct usb_host_interface *idesc;
+	struct usb_device *udev;
+	struct rc_dev *rcdev;
+	struct imon *imon;
+	int i, ret;
+
+	udev = interface_to_usbdev(intf);
+	idesc = intf->cur_altsetting;
+
+	for (i = 0; i < idesc->desc.bNumEndpoints; i++) {
+		struct usb_endpoint_descriptor *ep = &idesc->endpoint[i].desc;
+
+		if (usb_endpoint_is_int_in(ep)) {
+			ir_ep = ep;
+			break;
+		}
+	}
+
+	if (!ir_ep) {
+		dev_err(&intf->dev, "IR endpoint missing");
+		return -ENODEV;
+	}
+
+	imon = devm_kmalloc(&intf->dev, sizeof(*imon), GFP_KERNEL);
+	if (!imon)
+		return -ENOMEM;
+
+	imon->ir_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!imon->ir_urb)
+		return -ENOMEM;
+
+	imon->ir_buf = kmalloc(sizeof(__be64), GFP_KERNEL);
+	if (!imon->ir_buf) {
+		ret = -ENOMEM;
+		goto free_urb;
+	}
+
+	imon->dev = &intf->dev;
+	usb_fill_int_urb(imon->ir_urb, udev,
+			 usb_rcvintpipe(udev, ir_ep->bEndpointAddress),
+			 imon->ir_buf, sizeof(__be64),
+			 imon_ir_rx, imon, ir_ep->bInterval);
+
+	rcdev = devm_rc_allocate_device(&intf->dev, RC_DRIVER_IR_RAW);
+	if (!rcdev) {
+		ret = -ENOMEM;
+		goto free_urb;
+	}
+
+	usb_make_path(udev, imon->phys, sizeof(imon->phys));
+
+	rcdev->device_name = "iMON Station";
+	rcdev->driver_name = KBUILD_MODNAME;
+	rcdev->input_phys = imon->phys;
+	usb_to_input_id(udev, &rcdev->input_id);
+	rcdev->dev.parent = &intf->dev;
+	rcdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
+	rcdev->map_name = RC_MAP_IMON_RSC;
+	rcdev->rx_resolution = BIT_DURATION;
+	rcdev->priv = imon;
+
+	ret = devm_rc_register_device(&intf->dev, rcdev);
+	if (ret)
+		goto free_urb;
+
+	imon->rcdev = rcdev;
+
+	ret = usb_submit_urb(imon->ir_urb, GFP_KERNEL);
+	if (ret)
+		goto free_urb;
+
+	usb_set_intfdata(intf, imon);
+
+	return 0;
+
+free_urb:
+	usb_free_urb(imon->ir_urb);
+	kfree(imon->ir_buf);
+	return ret;
+}
+
+static void imon_disconnect(struct usb_interface *intf)
+{
+	struct imon *imon = usb_get_intfdata(intf);
+
+	usb_kill_urb(imon->ir_urb);
+	usb_free_urb(imon->ir_urb);
+	kfree(imon->ir_buf);
+}
+
+static const struct usb_device_id imon_table[] = {
+	/* SoundGraph iMON (IR only) -- sg_imon.inf */
+	{ USB_DEVICE(0x04e8, 0xff30) },
+	{}
+};
+
+static struct usb_driver imon_driver = {
+	.name = KBUILD_MODNAME,
+	.probe = imon_probe,
+	.disconnect = imon_disconnect,
+	.id_table = imon_table
+};
+
+module_usb_driver(imon_driver);
+
+MODULE_DESCRIPTION("Early raw iMON IR devices");
+MODULE_AUTHOR("Sean Young <sean@mess.org>");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(usb, imon_table);