Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 406 insertions, 0 deletions

diff --git a/drivers/media/rc/ir-hix5hd2.c b/drivers/media/rc/ir-hix5hd2.c
new file mode 100644
index 000000000..4ff954b11
--- /dev/null
+++ b/drivers/media/rc/ir-hix5hd2.c
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014 Linaro Ltd.
+ * Copyright (c) 2014 HiSilicon Limited.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <media/rc-core.h>
+
+#define IR_ENABLE		0x00
+#define IR_CONFIG		0x04
+#define CNT_LEADS		0x08
+#define CNT_LEADE		0x0c
+#define CNT_SLEADE		0x10
+#define CNT0_B			0x14
+#define CNT1_B			0x18
+#define IR_BUSY			0x1c
+#define IR_DATAH		0x20
+#define IR_DATAL		0x24
+#define IR_INTM			0x28
+#define IR_INTS			0x2c
+#define IR_INTC			0x30
+#define IR_START		0x34
+
+/* interrupt mask */
+#define INTMS_SYMBRCV		(BIT(24) | BIT(8))
+#define INTMS_TIMEOUT		(BIT(25) | BIT(9))
+#define INTMS_OVERFLOW		(BIT(26) | BIT(10))
+#define INT_CLR_OVERFLOW	BIT(18)
+#define INT_CLR_TIMEOUT		BIT(17)
+#define INT_CLR_RCV		BIT(16)
+#define INT_CLR_RCVTIMEOUT	(BIT(16) | BIT(17))
+
+#define IR_CLK_ENABLE		BIT(4)
+#define IR_CLK_RESET		BIT(5)
+
+/* IR_ENABLE register bits */
+#define IR_ENABLE_EN		BIT(0)
+#define IR_ENABLE_EN_EXTRA	BIT(8)
+
+#define IR_CFG_WIDTH_MASK	0xffff
+#define IR_CFG_WIDTH_SHIFT	16
+#define IR_CFG_FORMAT_MASK	0x3
+#define IR_CFG_FORMAT_SHIFT	14
+#define IR_CFG_INT_LEVEL_MASK	0x3f
+#define IR_CFG_INT_LEVEL_SHIFT	8
+/* only support raw mode */
+#define IR_CFG_MODE_RAW		BIT(7)
+#define IR_CFG_FREQ_MASK	0x7f
+#define IR_CFG_FREQ_SHIFT	0
+#define IR_CFG_INT_THRESHOLD	1
+/* symbol start from low to high, symbol stream end at high*/
+#define IR_CFG_SYMBOL_FMT	0
+#define IR_CFG_SYMBOL_MAXWIDTH	0x3e80
+
+#define IR_HIX5HD2_NAME		"hix5hd2-ir"
+
+/* Need to set extra bit for enabling IR */
+#define HIX5HD2_FLAG_EXTRA_ENABLE	BIT(0)
+
+struct hix5hd2_soc_data {
+	u32 clk_reg;
+	u32 flags;
+};
+
+static const struct hix5hd2_soc_data hix5hd2_data = {
+	.clk_reg = 0x48,
+};
+
+static const struct hix5hd2_soc_data hi3796cv300_data = {
+	.clk_reg = 0x60,
+	.flags = HIX5HD2_FLAG_EXTRA_ENABLE,
+};
+
+struct hix5hd2_ir_priv {
+	int			irq;
+	void __iomem		*base;
+	struct device		*dev;
+	struct rc_dev		*rdev;
+	struct regmap		*regmap;
+	struct clk		*clock;
+	unsigned long		rate;
+	const struct hix5hd2_soc_data *socdata;
+};
+
+static int hix5hd2_ir_clk_enable(struct hix5hd2_ir_priv *dev, bool on)
+{
+	u32 clk_reg = dev->socdata->clk_reg;
+	u32 val;
+	int ret = 0;
+
+	if (dev->regmap) {
+		regmap_read(dev->regmap, clk_reg, &val);
+		if (on) {
+			val &= ~IR_CLK_RESET;
+			val |= IR_CLK_ENABLE;
+		} else {
+			val &= ~IR_CLK_ENABLE;
+			val |= IR_CLK_RESET;
+		}
+		regmap_write(dev->regmap, clk_reg, val);
+	} else {
+		if (on)
+			ret = clk_prepare_enable(dev->clock);
+		else
+			clk_disable_unprepare(dev->clock);
+	}
+	return ret;
+}
+
+static inline void hix5hd2_ir_enable(struct hix5hd2_ir_priv *priv)
+{
+	u32 val = IR_ENABLE_EN;
+
+	if (priv->socdata->flags & HIX5HD2_FLAG_EXTRA_ENABLE)
+		val |= IR_ENABLE_EN_EXTRA;
+
+	writel_relaxed(val, priv->base + IR_ENABLE);
+}
+
+static int hix5hd2_ir_config(struct hix5hd2_ir_priv *priv)
+{
+	int timeout = 10000;
+	u32 val, rate;
+
+	hix5hd2_ir_enable(priv);
+
+	while (readl_relaxed(priv->base + IR_BUSY)) {
+		if (timeout--) {
+			udelay(1);
+		} else {
+			dev_err(priv->dev, "IR_BUSY timeout\n");
+			return -ETIMEDOUT;
+		}
+	}
+
+	/* Now only support raw mode, with symbol start from low to high */
+	rate = DIV_ROUND_CLOSEST(priv->rate, 1000000);
+	val = IR_CFG_SYMBOL_MAXWIDTH & IR_CFG_WIDTH_MASK << IR_CFG_WIDTH_SHIFT;
+	val |= IR_CFG_SYMBOL_FMT & IR_CFG_FORMAT_MASK << IR_CFG_FORMAT_SHIFT;
+	val |= (IR_CFG_INT_THRESHOLD - 1) & IR_CFG_INT_LEVEL_MASK
+	       << IR_CFG_INT_LEVEL_SHIFT;
+	val |= IR_CFG_MODE_RAW;
+	val |= (rate - 1) & IR_CFG_FREQ_MASK << IR_CFG_FREQ_SHIFT;
+	writel_relaxed(val, priv->base + IR_CONFIG);
+
+	writel_relaxed(0x00, priv->base + IR_INTM);
+	/* write arbitrary value to start  */
+	writel_relaxed(0x01, priv->base + IR_START);
+	return 0;
+}
+
+static int hix5hd2_ir_open(struct rc_dev *rdev)
+{
+	struct hix5hd2_ir_priv *priv = rdev->priv;
+	int ret;
+
+	ret = hix5hd2_ir_clk_enable(priv, true);
+	if (ret)
+		return ret;
+
+	ret = hix5hd2_ir_config(priv);
+	if (ret) {
+		hix5hd2_ir_clk_enable(priv, false);
+		return ret;
+	}
+	return 0;
+}
+
+static void hix5hd2_ir_close(struct rc_dev *rdev)
+{
+	struct hix5hd2_ir_priv *priv = rdev->priv;
+
+	hix5hd2_ir_clk_enable(priv, false);
+}
+
+static irqreturn_t hix5hd2_ir_rx_interrupt(int irq, void *data)
+{
+	u32 symb_num, symb_val, symb_time;
+	u32 data_l, data_h;
+	u32 irq_sr, i;
+	struct hix5hd2_ir_priv *priv = data;
+
+	irq_sr = readl_relaxed(priv->base + IR_INTS);
+	if (irq_sr & INTMS_OVERFLOW) {
+		/*
+		 * we must read IR_DATAL first, then we can clean up
+		 * IR_INTS availably since logic would not clear
+		 * fifo when overflow, drv do the job
+		 */
+		ir_raw_event_overflow(priv->rdev);
+		symb_num = readl_relaxed(priv->base + IR_DATAH);
+		for (i = 0; i < symb_num; i++)
+			readl_relaxed(priv->base + IR_DATAL);
+
+		writel_relaxed(INT_CLR_OVERFLOW, priv->base + IR_INTC);
+		dev_info(priv->dev, "overflow, level=%d\n",
+			 IR_CFG_INT_THRESHOLD);
+	}
+
+	if ((irq_sr & INTMS_SYMBRCV) || (irq_sr & INTMS_TIMEOUT)) {
+		struct ir_raw_event ev = {};
+
+		symb_num = readl_relaxed(priv->base + IR_DATAH);
+		for (i = 0; i < symb_num; i++) {
+			symb_val = readl_relaxed(priv->base + IR_DATAL);
+			data_l = ((symb_val & 0xffff) * 10);
+			data_h =  ((symb_val >> 16) & 0xffff) * 10;
+			symb_time = (data_l + data_h) / 10;
+
+			ev.duration = data_l;
+			ev.pulse = true;
+			ir_raw_event_store(priv->rdev, &ev);
+
+			if (symb_time < IR_CFG_SYMBOL_MAXWIDTH) {
+				ev.duration = data_h;
+				ev.pulse = false;
+				ir_raw_event_store(priv->rdev, &ev);
+			} else {
+				ir_raw_event_set_idle(priv->rdev, true);
+			}
+		}
+
+		if (irq_sr & INTMS_SYMBRCV)
+			writel_relaxed(INT_CLR_RCV, priv->base + IR_INTC);
+		if (irq_sr & INTMS_TIMEOUT)
+			writel_relaxed(INT_CLR_TIMEOUT, priv->base + IR_INTC);
+	}
+
+	/* Empty software fifo */
+	ir_raw_event_handle(priv->rdev);
+	return IRQ_HANDLED;
+}
+
+static const struct of_device_id hix5hd2_ir_table[] = {
+	{ .compatible = "hisilicon,hix5hd2-ir", &hix5hd2_data, },
+	{ .compatible = "hisilicon,hi3796cv300-ir", &hi3796cv300_data, },
+	{},
+};
+MODULE_DEVICE_TABLE(of, hix5hd2_ir_table);
+
+static int hix5hd2_ir_probe(struct platform_device *pdev)
+{
+	struct rc_dev *rdev;
+	struct device *dev = &pdev->dev;
+	struct hix5hd2_ir_priv *priv;
+	struct device_node *node = pdev->dev.of_node;
+	const struct of_device_id *of_id;
+	const char *map_name;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	of_id = of_match_device(hix5hd2_ir_table, dev);
+	if (!of_id) {
+		dev_err(dev, "Unable to initialize IR data\n");
+		return -ENODEV;
+	}
+	priv->socdata = of_id->data;
+
+	priv->regmap = syscon_regmap_lookup_by_phandle(node,
+						       "hisilicon,power-syscon");
+	if (IS_ERR(priv->regmap)) {
+		dev_info(dev, "no power-reg\n");
+		priv->regmap = NULL;
+	}
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->irq = platform_get_irq(pdev, 0);
+	if (priv->irq < 0)
+		return priv->irq;
+
+	rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
+	if (!rdev)
+		return -ENOMEM;
+
+	priv->clock = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clock)) {
+		dev_err(dev, "clock not found\n");
+		ret = PTR_ERR(priv->clock);
+		goto err;
+	}
+	ret = clk_prepare_enable(priv->clock);
+	if (ret)
+		goto err;
+	priv->rate = clk_get_rate(priv->clock);
+
+	rdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
+	rdev->priv = priv;
+	rdev->open = hix5hd2_ir_open;
+	rdev->close = hix5hd2_ir_close;
+	rdev->driver_name = IR_HIX5HD2_NAME;
+	map_name = of_get_property(node, "linux,rc-map-name", NULL);
+	rdev->map_name = map_name ?: RC_MAP_EMPTY;
+	rdev->device_name = IR_HIX5HD2_NAME;
+	rdev->input_phys = IR_HIX5HD2_NAME "/input0";
+	rdev->input_id.bustype = BUS_HOST;
+	rdev->input_id.vendor = 0x0001;
+	rdev->input_id.product = 0x0001;
+	rdev->input_id.version = 0x0100;
+	rdev->rx_resolution = 10;
+	rdev->timeout = IR_CFG_SYMBOL_MAXWIDTH * 10;
+
+	ret = rc_register_device(rdev);
+	if (ret < 0)
+		goto clkerr;
+
+	if (devm_request_irq(dev, priv->irq, hix5hd2_ir_rx_interrupt,
+			     0, pdev->name, priv) < 0) {
+		dev_err(dev, "IRQ %d register failed\n", priv->irq);
+		ret = -EINVAL;
+		goto regerr;
+	}
+
+	priv->rdev = rdev;
+	priv->dev = dev;
+	platform_set_drvdata(pdev, priv);
+
+	return ret;
+
+regerr:
+	rc_unregister_device(rdev);
+	rdev = NULL;
+clkerr:
+	clk_disable_unprepare(priv->clock);
+err:
+	rc_free_device(rdev);
+	dev_err(dev, "Unable to register device (%d)\n", ret);
+	return ret;
+}
+
+static int hix5hd2_ir_remove(struct platform_device *pdev)
+{
+	struct hix5hd2_ir_priv *priv = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(priv->clock);
+	rc_unregister_device(priv->rdev);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int hix5hd2_ir_suspend(struct device *dev)
+{
+	struct hix5hd2_ir_priv *priv = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(priv->clock);
+	hix5hd2_ir_clk_enable(priv, false);
+
+	return 0;
+}
+
+static int hix5hd2_ir_resume(struct device *dev)
+{
+	struct hix5hd2_ir_priv *priv = dev_get_drvdata(dev);
+	int ret;
+
+	ret = hix5hd2_ir_clk_enable(priv, true);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(priv->clock);
+	if (ret) {
+		hix5hd2_ir_clk_enable(priv, false);
+		return ret;
+	}
+
+	hix5hd2_ir_enable(priv);
+
+	writel_relaxed(0x00, priv->base + IR_INTM);
+	writel_relaxed(0xff, priv->base + IR_INTC);
+	writel_relaxed(0x01, priv->base + IR_START);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(hix5hd2_ir_pm_ops, hix5hd2_ir_suspend,
+			 hix5hd2_ir_resume);
+
+static struct platform_driver hix5hd2_ir_driver = {
+	.driver = {
+		.name = IR_HIX5HD2_NAME,
+		.of_match_table = hix5hd2_ir_table,
+		.pm     = &hix5hd2_ir_pm_ops,
+	},
+	.probe = hix5hd2_ir_probe,
+	.remove = hix5hd2_ir_remove,
+};
+
+module_platform_driver(hix5hd2_ir_driver);
+
+MODULE_DESCRIPTION("IR controller driver for hix5hd2 platforms");
+MODULE_AUTHOR("Guoxiong Yan <yanguoxiong@huawei.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:hix5hd2-ir");