Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 289 insertions, 0 deletions

diff --git a/drivers/media/rc/keymaps/rc-hauppauge.c b/drivers/media/rc/keymaps/rc-hauppauge.c
new file mode 100644
index 000000000..82552360c
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-hauppauge.c
@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: GPL-2.0+
+// rc-hauppauge.c - Keytable for Hauppauge Remote Controllers
+//
+// keymap imported from ir-keymaps.c
+//
+// This map currently contains the code for four different RCs:
+//	- New Hauppauge Gray;
+//	- Old Hauppauge Gray (with a golden screen for media keys);
+//	- Hauppauge Black;
+//	- DSR-0112 remote bundled with Haupauge MiniStick.
+//
+// Copyright (c) 2010-2011 by Mauro Carvalho Chehab
+
+#include <media/rc-map.h>
+#include <linux/module.h>
+
+/*
+ * Hauppauge:the newer, gray remotes (seems there are multiple
+ * slightly different versions), shipped with cx88+ivtv cards.
+ *
+ * This table contains the complete RC5 code, instead of just the data part
+ */
+
+static struct rc_map_table rc5_hauppauge_new[] = {
+	/*
+	 * Remote Controller Hauppauge Gray found on modern devices
+	 * Keycodes start with address = 0x1e
+	 */
+
+	{ 0x1e3b, KEY_SELECT },		/* GO / house symbol */
+	{ 0x1e3d, KEY_POWER2 },		/* system power (green button) */
+
+	{ 0x1e1c, KEY_TV },
+	{ 0x1e18, KEY_VIDEO },		/* Videos */
+	{ 0x1e19, KEY_AUDIO },		/* Music */
+	{ 0x1e1a, KEY_CAMERA },		/* Pictures */
+
+	{ 0x1e1b, KEY_EPG },		/* Guide */
+	{ 0x1e0c, KEY_RADIO },
+
+	{ 0x1e14, KEY_UP },
+	{ 0x1e15, KEY_DOWN },
+	{ 0x1e16, KEY_LEFT },
+	{ 0x1e17, KEY_RIGHT },
+	{ 0x1e25, KEY_OK },		/* OK */
+
+	{ 0x1e1f, KEY_EXIT },		/* back/exit */
+	{ 0x1e0d, KEY_MENU },
+
+	{ 0x1e10, KEY_VOLUMEUP },
+	{ 0x1e11, KEY_VOLUMEDOWN },
+
+	{ 0x1e12, KEY_PREVIOUS },	/* previous channel */
+	{ 0x1e0f, KEY_MUTE },
+
+	{ 0x1e20, KEY_CHANNELUP },	/* channel / program + */
+	{ 0x1e21, KEY_CHANNELDOWN },	/* channel / program - */
+
+	{ 0x1e37, KEY_RECORD },		/* recording */
+	{ 0x1e36, KEY_STOP },
+
+	{ 0x1e32, KEY_REWIND },		/* backward << */
+	{ 0x1e35, KEY_PLAY },
+	{ 0x1e34, KEY_FASTFORWARD },	/* forward >> */
+
+	{ 0x1e24, KEY_PREVIOUSSONG },	/* replay |< */
+	{ 0x1e30, KEY_PAUSE },		/* pause */
+	{ 0x1e1e, KEY_NEXTSONG },	/* skip >| */
+
+	{ 0x1e01, KEY_NUMERIC_1 },
+	{ 0x1e02, KEY_NUMERIC_2 },
+	{ 0x1e03, KEY_NUMERIC_3 },
+
+	{ 0x1e04, KEY_NUMERIC_4 },
+	{ 0x1e05, KEY_NUMERIC_5 },
+	{ 0x1e06, KEY_NUMERIC_6 },
+
+	{ 0x1e07, KEY_NUMERIC_7 },
+	{ 0x1e08, KEY_NUMERIC_8 },
+	{ 0x1e09, KEY_NUMERIC_9 },
+
+	{ 0x1e0a, KEY_TEXT },		/* keypad asterisk as well */
+	{ 0x1e00, KEY_NUMERIC_0 },
+	{ 0x1e0e, KEY_SUBTITLE },	/* also the Pound key (#) */
+
+	{ 0x1e0b, KEY_RED },		/* red button */
+	{ 0x1e2e, KEY_GREEN },		/* green button */
+	{ 0x1e38, KEY_YELLOW },		/* yellow key */
+	{ 0x1e29, KEY_BLUE },		/* blue key */
+
+	/*
+	 * Old Remote Controller Hauppauge Gray with a golden screen
+	 * Keycodes start with address = 0x1f
+	 */
+	{ 0x1f3d, KEY_POWER2 },		/* system power (green button) */
+	{ 0x1f3b, KEY_SELECT },		/* GO */
+
+	/* Keys 0 to 9 */
+	{ 0x1f00, KEY_NUMERIC_0 },
+	{ 0x1f01, KEY_NUMERIC_1 },
+	{ 0x1f02, KEY_NUMERIC_2 },
+	{ 0x1f03, KEY_NUMERIC_3 },
+	{ 0x1f04, KEY_NUMERIC_4 },
+	{ 0x1f05, KEY_NUMERIC_5 },
+	{ 0x1f06, KEY_NUMERIC_6 },
+	{ 0x1f07, KEY_NUMERIC_7 },
+	{ 0x1f08, KEY_NUMERIC_8 },
+	{ 0x1f09, KEY_NUMERIC_9 },
+
+	{ 0x1f1f, KEY_EXIT },		/* back/exit */
+	{ 0x1f0d, KEY_MENU },
+
+	{ 0x1f10, KEY_VOLUMEUP },
+	{ 0x1f11, KEY_VOLUMEDOWN },
+	{ 0x1f20, KEY_CHANNELUP },	/* channel / program + */
+	{ 0x1f21, KEY_CHANNELDOWN },	/* channel / program - */
+	{ 0x1f25, KEY_ENTER },		/* OK */
+
+	{ 0x1f0b, KEY_RED },		/* red button */
+	{ 0x1f2e, KEY_GREEN },		/* green button */
+	{ 0x1f38, KEY_YELLOW },		/* yellow key */
+	{ 0x1f29, KEY_BLUE },		/* blue key */
+
+	{ 0x1f0f, KEY_MUTE },
+	{ 0x1f0c, KEY_RADIO },		/* There's no indicator on this key */
+	{ 0x1f3c, KEY_ZOOM },		/* full */
+
+	{ 0x1f32, KEY_REWIND },		/* backward << */
+	{ 0x1f35, KEY_PLAY },
+	{ 0x1f34, KEY_FASTFORWARD },	/* forward >> */
+
+	{ 0x1f37, KEY_RECORD },		/* recording */
+	{ 0x1f36, KEY_STOP },
+	{ 0x1f30, KEY_PAUSE },		/* pause */
+
+	{ 0x1f24, KEY_PREVIOUSSONG },	/* replay |< */
+	{ 0x1f1e, KEY_NEXTSONG },	/* skip >| */
+
+	/*
+	 * Keycodes for DSR-0112 remote bundled with Haupauge MiniStick
+	 * Keycodes start with address = 0x1d
+	 */
+	{ 0x1d00, KEY_NUMERIC_0 },
+	{ 0x1d01, KEY_NUMERIC_1 },
+	{ 0x1d02, KEY_NUMERIC_2 },
+	{ 0x1d03, KEY_NUMERIC_3 },
+	{ 0x1d04, KEY_NUMERIC_4 },
+	{ 0x1d05, KEY_NUMERIC_5 },
+	{ 0x1d06, KEY_NUMERIC_6 },
+	{ 0x1d07, KEY_NUMERIC_7 },
+	{ 0x1d08, KEY_NUMERIC_8 },
+	{ 0x1d09, KEY_NUMERIC_9 },
+	{ 0x1d0a, KEY_TEXT },
+	{ 0x1d0d, KEY_MENU },
+	{ 0x1d0f, KEY_MUTE },
+	{ 0x1d10, KEY_VOLUMEUP },
+	{ 0x1d11, KEY_VOLUMEDOWN },
+	{ 0x1d12, KEY_PREVIOUS },        /* Prev.Ch .. ??? */
+	{ 0x1d14, KEY_UP },
+	{ 0x1d15, KEY_DOWN },
+	{ 0x1d16, KEY_LEFT },
+	{ 0x1d17, KEY_RIGHT },
+	{ 0x1d1c, KEY_TV },
+	{ 0x1d1e, KEY_NEXT },           /* >|             */
+	{ 0x1d1f, KEY_EXIT },
+	{ 0x1d20, KEY_CHANNELUP },
+	{ 0x1d21, KEY_CHANNELDOWN },
+	{ 0x1d24, KEY_LAST },           /* <|             */
+	{ 0x1d25, KEY_OK },
+	{ 0x1d30, KEY_PAUSE },
+	{ 0x1d32, KEY_REWIND },
+	{ 0x1d34, KEY_FASTFORWARD },
+	{ 0x1d35, KEY_PLAY },
+	{ 0x1d36, KEY_STOP },
+	{ 0x1d37, KEY_RECORD },
+	{ 0x1d3b, KEY_GOTO },
+	{ 0x1d3d, KEY_POWER },
+	{ 0x1d3f, KEY_HOME },
+
+	/*
+	 * Keycodes for PT# R-005 remote bundled with Haupauge HVR-930C
+	 * Keycodes start with address = 0x1c
+	 */
+	{ 0x1c3b, KEY_GOTO },
+	{ 0x1c3d, KEY_POWER },
+
+	{ 0x1c14, KEY_UP },
+	{ 0x1c15, KEY_DOWN },
+	{ 0x1c16, KEY_LEFT },
+	{ 0x1c17, KEY_RIGHT },
+	{ 0x1c25, KEY_OK },
+
+	{ 0x1c00, KEY_NUMERIC_0 },
+	{ 0x1c01, KEY_NUMERIC_1 },
+	{ 0x1c02, KEY_NUMERIC_2 },
+	{ 0x1c03, KEY_NUMERIC_3 },
+	{ 0x1c04, KEY_NUMERIC_4 },
+	{ 0x1c05, KEY_NUMERIC_5 },
+	{ 0x1c06, KEY_NUMERIC_6 },
+	{ 0x1c07, KEY_NUMERIC_7 },
+	{ 0x1c08, KEY_NUMERIC_8 },
+	{ 0x1c09, KEY_NUMERIC_9 },
+
+	{ 0x1c1f, KEY_EXIT },	/* BACK */
+	{ 0x1c0d, KEY_MENU },
+	{ 0x1c1c, KEY_TV },
+
+	{ 0x1c10, KEY_VOLUMEUP },
+	{ 0x1c11, KEY_VOLUMEDOWN },
+
+	{ 0x1c20, KEY_CHANNELUP },
+	{ 0x1c21, KEY_CHANNELDOWN },
+
+	{ 0x1c0f, KEY_MUTE },
+	{ 0x1c12, KEY_PREVIOUS }, /* Prev */
+
+	{ 0x1c36, KEY_STOP },
+	{ 0x1c37, KEY_RECORD },
+
+	{ 0x1c24, KEY_LAST },           /* <|             */
+	{ 0x1c1e, KEY_NEXT },           /* >|             */
+
+	{ 0x1c0a, KEY_TEXT },
+	{ 0x1c0e, KEY_SUBTITLE },	/* CC */
+
+	{ 0x1c32, KEY_REWIND },
+	{ 0x1c30, KEY_PAUSE },
+	{ 0x1c35, KEY_PLAY },
+	{ 0x1c34, KEY_FASTFORWARD },
+
+	/*
+	 * Keycodes for the old Black Remote Controller
+	 * This one also uses RC-5 protocol
+	 * Keycodes start with address = 0x00
+	 */
+	{ 0x000f, KEY_TV },
+	{ 0x001f, KEY_TV },
+	{ 0x0020, KEY_CHANNELUP },
+	{ 0x000c, KEY_RADIO },
+
+	{ 0x0011, KEY_VOLUMEDOWN },
+	{ 0x002e, KEY_ZOOM },		/* full screen */
+	{ 0x0010, KEY_VOLUMEUP },
+
+	{ 0x000d, KEY_MUTE },
+	{ 0x0021, KEY_CHANNELDOWN },
+	{ 0x0022, KEY_VIDEO },		/* source */
+
+	{ 0x0001, KEY_NUMERIC_1 },
+	{ 0x0002, KEY_NUMERIC_2 },
+	{ 0x0003, KEY_NUMERIC_3 },
+
+	{ 0x0004, KEY_NUMERIC_4 },
+	{ 0x0005, KEY_NUMERIC_5 },
+	{ 0x0006, KEY_NUMERIC_6 },
+
+	{ 0x0007, KEY_NUMERIC_7 },
+	{ 0x0008, KEY_NUMERIC_8 },
+	{ 0x0009, KEY_NUMERIC_9 },
+
+	{ 0x001e, KEY_RED },	/* Reserved */
+	{ 0x0000, KEY_NUMERIC_0 },
+	{ 0x0026, KEY_SLEEP },	/* Minimize */
+};
+
+static struct rc_map_list rc5_hauppauge_new_map = {
+	.map = {
+		.scan     = rc5_hauppauge_new,
+		.size     = ARRAY_SIZE(rc5_hauppauge_new),
+		.rc_proto = RC_PROTO_RC5,
+		.name     = RC_MAP_HAUPPAUGE,
+	}
+};
+
+static int __init init_rc_map_rc5_hauppauge_new(void)
+{
+	return rc_map_register(&rc5_hauppauge_new_map);
+}
+
+static void __exit exit_rc_map_rc5_hauppauge_new(void)
+{
+	rc_map_unregister(&rc5_hauppauge_new_map);
+}
+
+module_init(init_rc_map_rc5_hauppauge_new)
+module_exit(exit_rc_map_rc5_hauppauge_new)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab");