Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 429 insertions, 0 deletions

diff --git a/drivers/media/rc/sunxi-cir.c b/drivers/media/rc/sunxi-cir.c
new file mode 100644
index 000000000..b631a81e5
--- /dev/null
+++ b/drivers/media/rc/sunxi-cir.c
@@ -0,0 +1,429 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for Allwinner sunXi IR controller
+ *
+ * Copyright (C) 2014 Alexsey Shestacov <wingrime@linux-sunxi.org>
+ * Copyright (C) 2014 Alexander Bersenev <bay@hackerdom.ru>
+ *
+ * Based on sun5i-ir.c:
+ * Copyright (C) 2007-2012 Daniel Wang
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/reset.h>
+#include <media/rc-core.h>
+
+#define SUNXI_IR_DEV "sunxi-ir"
+
+/* Registers */
+/* IR Control */
+#define SUNXI_IR_CTL_REG      0x00
+/* Global Enable */
+#define REG_CTL_GEN			BIT(0)
+/* RX block enable */
+#define REG_CTL_RXEN			BIT(1)
+/* CIR mode */
+#define REG_CTL_MD			(BIT(4) | BIT(5))
+
+/* Rx Config */
+#define SUNXI_IR_RXCTL_REG    0x10
+/* Pulse Polarity Invert flag */
+#define REG_RXCTL_RPPI			BIT(2)
+
+/* Rx Data */
+#define SUNXI_IR_RXFIFO_REG   0x20
+
+/* Rx Interrupt Enable */
+#define SUNXI_IR_RXINT_REG    0x2C
+/* Rx FIFO Overflow Interrupt Enable */
+#define REG_RXINT_ROI_EN		BIT(0)
+/* Rx Packet End Interrupt Enable */
+#define REG_RXINT_RPEI_EN		BIT(1)
+/* Rx FIFO Data Available Interrupt Enable */
+#define REG_RXINT_RAI_EN		BIT(4)
+
+/* Rx FIFO available byte level */
+#define REG_RXINT_RAL(val)    ((val) << 8)
+
+/* Rx Interrupt Status */
+#define SUNXI_IR_RXSTA_REG    0x30
+/* Rx FIFO Overflow */
+#define REG_RXSTA_ROI			REG_RXINT_ROI_EN
+/* Rx Packet End */
+#define REG_RXSTA_RPE			REG_RXINT_RPEI_EN
+/* Rx FIFO Data Available */
+#define REG_RXSTA_RA			REG_RXINT_RAI_EN
+/* RX FIFO Get Available Counter */
+#define REG_RXSTA_GET_AC(val) (((val) >> 8) & (ir->fifo_size * 2 - 1))
+/* Clear all interrupt status value */
+#define REG_RXSTA_CLEARALL    0xff
+
+/* IR Sample Config */
+#define SUNXI_IR_CIR_REG      0x34
+/* CIR_REG register noise threshold */
+#define REG_CIR_NTHR(val)    (((val) << 2) & (GENMASK(7, 2)))
+/* CIR_REG register idle threshold */
+#define REG_CIR_ITHR(val)    (((val) << 8) & (GENMASK(15, 8)))
+
+/* Required frequency for IR0 or IR1 clock in CIR mode (default) */
+#define SUNXI_IR_BASE_CLK     8000000
+/* Noise threshold in samples  */
+#define SUNXI_IR_RXNOISE      1
+
+/**
+ * struct sunxi_ir_quirks - Differences between SoC variants.
+ *
+ * @has_reset: SoC needs reset deasserted.
+ * @fifo_size: size of the fifo.
+ */
+struct sunxi_ir_quirks {
+	bool		has_reset;
+	int		fifo_size;
+};
+
+struct sunxi_ir {
+	struct rc_dev   *rc;
+	void __iomem    *base;
+	int             irq;
+	int		fifo_size;
+	struct clk      *clk;
+	struct clk      *apb_clk;
+	struct reset_control *rst;
+	const char      *map_name;
+};
+
+static irqreturn_t sunxi_ir_irq(int irqno, void *dev_id)
+{
+	unsigned long status;
+	unsigned char dt;
+	unsigned int cnt, rc;
+	struct sunxi_ir *ir = dev_id;
+	struct ir_raw_event rawir = {};
+
+	status = readl(ir->base + SUNXI_IR_RXSTA_REG);
+
+	/* clean all pending statuses */
+	writel(status | REG_RXSTA_CLEARALL, ir->base + SUNXI_IR_RXSTA_REG);
+
+	if (status & (REG_RXSTA_RA | REG_RXSTA_RPE)) {
+		/* How many messages in fifo */
+		rc  = REG_RXSTA_GET_AC(status);
+		/* Sanity check */
+		rc = rc > ir->fifo_size ? ir->fifo_size : rc;
+		/* If we have data */
+		for (cnt = 0; cnt < rc; cnt++) {
+			/* for each bit in fifo */
+			dt = readb(ir->base + SUNXI_IR_RXFIFO_REG);
+			rawir.pulse = (dt & 0x80) != 0;
+			rawir.duration = ((dt & 0x7f) + 1) *
+					 ir->rc->rx_resolution;
+			ir_raw_event_store_with_filter(ir->rc, &rawir);
+		}
+	}
+
+	if (status & REG_RXSTA_ROI) {
+		ir_raw_event_overflow(ir->rc);
+	} else if (status & REG_RXSTA_RPE) {
+		ir_raw_event_set_idle(ir->rc, true);
+		ir_raw_event_handle(ir->rc);
+	} else {
+		ir_raw_event_handle(ir->rc);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/* Convert idle threshold to usec */
+static unsigned int sunxi_ithr_to_usec(unsigned int base_clk, unsigned int ithr)
+{
+	return DIV_ROUND_CLOSEST(USEC_PER_SEC * (ithr + 1),
+				 base_clk / (128 * 64));
+}
+
+/* Convert usec to idle threshold */
+static unsigned int sunxi_usec_to_ithr(unsigned int base_clk, unsigned int usec)
+{
+	/* make sure we don't end up with a timeout less than requested */
+	return DIV_ROUND_UP((base_clk / (128 * 64)) * usec,  USEC_PER_SEC) - 1;
+}
+
+static int sunxi_ir_set_timeout(struct rc_dev *rc_dev, unsigned int timeout)
+{
+	struct sunxi_ir *ir = rc_dev->priv;
+	unsigned int base_clk = clk_get_rate(ir->clk);
+
+	unsigned int ithr = sunxi_usec_to_ithr(base_clk, timeout);
+
+	dev_dbg(rc_dev->dev.parent, "setting idle threshold to %u\n", ithr);
+
+	/* Set noise threshold and idle threshold */
+	writel(REG_CIR_NTHR(SUNXI_IR_RXNOISE) | REG_CIR_ITHR(ithr),
+	       ir->base + SUNXI_IR_CIR_REG);
+
+	rc_dev->timeout = sunxi_ithr_to_usec(base_clk, ithr);
+
+	return 0;
+}
+
+static int sunxi_ir_hw_init(struct device *dev)
+{
+	struct sunxi_ir *ir = dev_get_drvdata(dev);
+	u32 tmp;
+	int ret;
+
+	ret = reset_control_deassert(ir->rst);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(ir->apb_clk);
+	if (ret) {
+		dev_err(dev, "failed to enable apb clk\n");
+		goto exit_assert_reset;
+	}
+
+	ret = clk_prepare_enable(ir->clk);
+	if (ret) {
+		dev_err(dev, "failed to enable ir clk\n");
+		goto exit_disable_apb_clk;
+	}
+
+	/* Enable CIR Mode */
+	writel(REG_CTL_MD, ir->base + SUNXI_IR_CTL_REG);
+
+	/* Set noise threshold and idle threshold */
+	sunxi_ir_set_timeout(ir->rc, ir->rc->timeout);
+
+	/* Invert Input Signal */
+	writel(REG_RXCTL_RPPI, ir->base + SUNXI_IR_RXCTL_REG);
+
+	/* Clear All Rx Interrupt Status */
+	writel(REG_RXSTA_CLEARALL, ir->base + SUNXI_IR_RXSTA_REG);
+
+	/*
+	 * Enable IRQ on overflow, packet end, FIFO available with trigger
+	 * level
+	 */
+	writel(REG_RXINT_ROI_EN | REG_RXINT_RPEI_EN |
+	       REG_RXINT_RAI_EN | REG_RXINT_RAL(ir->fifo_size / 2 - 1),
+	       ir->base + SUNXI_IR_RXINT_REG);
+
+	/* Enable IR Module */
+	tmp = readl(ir->base + SUNXI_IR_CTL_REG);
+	writel(tmp | REG_CTL_GEN | REG_CTL_RXEN, ir->base + SUNXI_IR_CTL_REG);
+
+	return 0;
+
+exit_disable_apb_clk:
+	clk_disable_unprepare(ir->apb_clk);
+exit_assert_reset:
+	reset_control_assert(ir->rst);
+
+	return ret;
+}
+
+static void sunxi_ir_hw_exit(struct device *dev)
+{
+	struct sunxi_ir *ir = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(ir->clk);
+	clk_disable_unprepare(ir->apb_clk);
+	reset_control_assert(ir->rst);
+}
+
+static int __maybe_unused sunxi_ir_suspend(struct device *dev)
+{
+	sunxi_ir_hw_exit(dev);
+
+	return 0;
+}
+
+static int __maybe_unused sunxi_ir_resume(struct device *dev)
+{
+	return sunxi_ir_hw_init(dev);
+}
+
+static SIMPLE_DEV_PM_OPS(sunxi_ir_pm_ops, sunxi_ir_suspend, sunxi_ir_resume);
+
+static int sunxi_ir_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	struct device *dev = &pdev->dev;
+	struct device_node *dn = dev->of_node;
+	const struct sunxi_ir_quirks *quirks;
+	struct sunxi_ir *ir;
+	u32 b_clk_freq = SUNXI_IR_BASE_CLK;
+
+	ir = devm_kzalloc(dev, sizeof(struct sunxi_ir), GFP_KERNEL);
+	if (!ir)
+		return -ENOMEM;
+
+	quirks = of_device_get_match_data(&pdev->dev);
+	if (!quirks) {
+		dev_err(&pdev->dev, "Failed to determine the quirks to use\n");
+		return -ENODEV;
+	}
+
+	ir->fifo_size = quirks->fifo_size;
+
+	/* Clock */
+	ir->apb_clk = devm_clk_get(dev, "apb");
+	if (IS_ERR(ir->apb_clk)) {
+		dev_err(dev, "failed to get a apb clock.\n");
+		return PTR_ERR(ir->apb_clk);
+	}
+	ir->clk = devm_clk_get(dev, "ir");
+	if (IS_ERR(ir->clk)) {
+		dev_err(dev, "failed to get a ir clock.\n");
+		return PTR_ERR(ir->clk);
+	}
+
+	/* Base clock frequency (optional) */
+	of_property_read_u32(dn, "clock-frequency", &b_clk_freq);
+
+	/* Reset */
+	if (quirks->has_reset) {
+		ir->rst = devm_reset_control_get_exclusive(dev, NULL);
+		if (IS_ERR(ir->rst))
+			return PTR_ERR(ir->rst);
+	}
+
+	ret = clk_set_rate(ir->clk, b_clk_freq);
+	if (ret) {
+		dev_err(dev, "set ir base clock failed!\n");
+		return ret;
+	}
+	dev_dbg(dev, "set base clock frequency to %d Hz.\n", b_clk_freq);
+
+	/* IO */
+	ir->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ir->base)) {
+		return PTR_ERR(ir->base);
+	}
+
+	ir->rc = rc_allocate_device(RC_DRIVER_IR_RAW);
+	if (!ir->rc) {
+		dev_err(dev, "failed to allocate device\n");
+		return -ENOMEM;
+	}
+
+	ir->rc->priv = ir;
+	ir->rc->device_name = SUNXI_IR_DEV;
+	ir->rc->input_phys = "sunxi-ir/input0";
+	ir->rc->input_id.bustype = BUS_HOST;
+	ir->rc->input_id.vendor = 0x0001;
+	ir->rc->input_id.product = 0x0001;
+	ir->rc->input_id.version = 0x0100;
+	ir->map_name = of_get_property(dn, "linux,rc-map-name", NULL);
+	ir->rc->map_name = ir->map_name ?: RC_MAP_EMPTY;
+	ir->rc->dev.parent = dev;
+	ir->rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
+	/* Frequency after IR internal divider with sample period in us */
+	ir->rc->rx_resolution = (USEC_PER_SEC / (b_clk_freq / 64));
+	ir->rc->timeout = IR_DEFAULT_TIMEOUT;
+	ir->rc->min_timeout = sunxi_ithr_to_usec(b_clk_freq, 0);
+	ir->rc->max_timeout = sunxi_ithr_to_usec(b_clk_freq, 255);
+	ir->rc->s_timeout = sunxi_ir_set_timeout;
+	ir->rc->driver_name = SUNXI_IR_DEV;
+
+	ret = rc_register_device(ir->rc);
+	if (ret) {
+		dev_err(dev, "failed to register rc device\n");
+		goto exit_free_dev;
+	}
+
+	platform_set_drvdata(pdev, ir);
+
+	/* IRQ */
+	ir->irq = platform_get_irq(pdev, 0);
+	if (ir->irq < 0) {
+		ret = ir->irq;
+		goto exit_free_dev;
+	}
+
+	ret = devm_request_irq(dev, ir->irq, sunxi_ir_irq, 0, SUNXI_IR_DEV, ir);
+	if (ret) {
+		dev_err(dev, "failed request irq\n");
+		goto exit_free_dev;
+	}
+
+	ret = sunxi_ir_hw_init(dev);
+	if (ret)
+		goto exit_free_dev;
+
+	dev_info(dev, "initialized sunXi IR driver\n");
+	return 0;
+
+exit_free_dev:
+	rc_free_device(ir->rc);
+
+	return ret;
+}
+
+static int sunxi_ir_remove(struct platform_device *pdev)
+{
+	struct sunxi_ir *ir = platform_get_drvdata(pdev);
+
+	rc_unregister_device(ir->rc);
+	sunxi_ir_hw_exit(&pdev->dev);
+
+	return 0;
+}
+
+static void sunxi_ir_shutdown(struct platform_device *pdev)
+{
+	sunxi_ir_hw_exit(&pdev->dev);
+}
+
+static const struct sunxi_ir_quirks sun4i_a10_ir_quirks = {
+	.has_reset = false,
+	.fifo_size = 16,
+};
+
+static const struct sunxi_ir_quirks sun5i_a13_ir_quirks = {
+	.has_reset = false,
+	.fifo_size = 64,
+};
+
+static const struct sunxi_ir_quirks sun6i_a31_ir_quirks = {
+	.has_reset = true,
+	.fifo_size = 64,
+};
+
+static const struct of_device_id sunxi_ir_match[] = {
+	{
+		.compatible = "allwinner,sun4i-a10-ir",
+		.data = &sun4i_a10_ir_quirks,
+	},
+	{
+		.compatible = "allwinner,sun5i-a13-ir",
+		.data = &sun5i_a13_ir_quirks,
+	},
+	{
+		.compatible = "allwinner,sun6i-a31-ir",
+		.data = &sun6i_a31_ir_quirks,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, sunxi_ir_match);
+
+static struct platform_driver sunxi_ir_driver = {
+	.probe          = sunxi_ir_probe,
+	.remove         = sunxi_ir_remove,
+	.shutdown       = sunxi_ir_shutdown,
+	.driver = {
+		.name = SUNXI_IR_DEV,
+		.of_match_table = sunxi_ir_match,
+		.pm = &sunxi_ir_pm_ops,
+	},
+};
+
+module_platform_driver(sunxi_ir_driver);
+
+MODULE_DESCRIPTION("Allwinner sunXi IR controller driver");
+MODULE_AUTHOR("Alexsey Shestacov <wingrime@linux-sunxi.org>");
+MODULE_LICENSE("GPL");