Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 194 insertions, 0 deletions

diff --git a/drivers/media/tuners/mc44s803_priv.h b/drivers/media/tuners/mc44s803_priv.h
new file mode 100644
index 000000000..45286352b
--- /dev/null
+++ b/drivers/media/tuners/mc44s803_priv.h
@@ -0,0 +1,194 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Driver for Freescale MC44S803 Low Power CMOS Broadband Tuner
+ *
+ *  Copyright (c) 2009 Jochen Friedrich <jochen@scram.de>
+ */
+
+#ifndef MC44S803_PRIV_H
+#define MC44S803_PRIV_H
+
+/* This driver is based on the information available in the datasheet
+   http://www.freescale.com/files/rf_if/doc/data_sheet/MC44S803.pdf
+
+   SPI or I2C Address : 0xc0-0xc6
+
+   Reg.No | Function
+   -------------------------------------------
+       00 | Power Down
+       01 | Reference Oszillator
+       02 | Reference Dividers
+       03 | Mixer and Reference Buffer
+       04 | Reset/Serial Out
+       05 | LO 1
+       06 | LO 2
+       07 | Circuit Adjust
+       08 | Test
+       09 | Digital Tune
+       0A | LNA AGC
+       0B | Data Register Address
+       0C | Regulator Test
+       0D | VCO Test
+       0E | LNA Gain/Input Power
+       0F | ID Bits
+
+*/
+
+#define MC44S803_OSC 26000000	/* 26 MHz */
+#define MC44S803_IF1 1086000000 /* 1086 MHz */
+#define MC44S803_IF2 36125000	/* 36.125 MHz */
+
+#define MC44S803_REG_POWER	0
+#define MC44S803_REG_REFOSC	1
+#define MC44S803_REG_REFDIV	2
+#define MC44S803_REG_MIXER	3
+#define MC44S803_REG_RESET	4
+#define MC44S803_REG_LO1	5
+#define MC44S803_REG_LO2	6
+#define MC44S803_REG_CIRCADJ	7
+#define MC44S803_REG_TEST	8
+#define MC44S803_REG_DIGTUNE	9
+#define MC44S803_REG_LNAAGC	0x0A
+#define MC44S803_REG_DATAREG	0x0B
+#define MC44S803_REG_REGTEST	0x0C
+#define MC44S803_REG_VCOTEST	0x0D
+#define MC44S803_REG_LNAGAIN	0x0E
+#define MC44S803_REG_ID		0x0F
+
+/* Register definitions */
+#define MC44S803_ADDR		0x0F
+#define MC44S803_ADDR_S		0
+/* REG_POWER */
+#define MC44S803_POWER		0xFFFFF0
+#define MC44S803_POWER_S	4
+/* REG_REFOSC */
+#define MC44S803_REFOSC		0x1FF0
+#define MC44S803_REFOSC_S	4
+#define MC44S803_OSCSEL		0x2000
+#define MC44S803_OSCSEL_S	13
+/* REG_REFDIV */
+#define MC44S803_R2		0x1FF0
+#define MC44S803_R2_S		4
+#define MC44S803_REFBUF_EN	0x2000
+#define MC44S803_REFBUF_EN_S	13
+#define MC44S803_R1		0x7C000
+#define MC44S803_R1_S		14
+/* REG_MIXER */
+#define MC44S803_R3		0x70
+#define MC44S803_R3_S		4
+#define MC44S803_MUX3		0x80
+#define MC44S803_MUX3_S		7
+#define MC44S803_MUX4		0x100
+#define MC44S803_MUX4_S		8
+#define MC44S803_OSC_SCR	0x200
+#define MC44S803_OSC_SCR_S	9
+#define MC44S803_TRI_STATE	0x400
+#define MC44S803_TRI_STATE_S	10
+#define MC44S803_BUF_GAIN	0x800
+#define MC44S803_BUF_GAIN_S	11
+#define MC44S803_BUF_IO		0x1000
+#define MC44S803_BUF_IO_S	12
+#define MC44S803_MIXER_RES	0xFE000
+#define MC44S803_MIXER_RES_S	13
+/* REG_RESET */
+#define MC44S803_RS		0x10
+#define MC44S803_RS_S		4
+#define MC44S803_SO		0x20
+#define MC44S803_SO_S		5
+/* REG_LO1 */
+#define MC44S803_LO1		0xFFF0
+#define MC44S803_LO1_S		4
+/* REG_LO2 */
+#define MC44S803_LO2		0x7FFF0
+#define MC44S803_LO2_S		4
+/* REG_CIRCADJ */
+#define MC44S803_G1		0x20
+#define MC44S803_G1_S		5
+#define MC44S803_G3		0x80
+#define MC44S803_G3_S		7
+#define MC44S803_CIRCADJ_RES	0x300
+#define MC44S803_CIRCADJ_RES_S	8
+#define MC44S803_G6		0x400
+#define MC44S803_G6_S		10
+#define MC44S803_G7		0x800
+#define MC44S803_G7_S		11
+#define MC44S803_S1		0x1000
+#define MC44S803_S1_S		12
+#define MC44S803_LP		0x7E000
+#define MC44S803_LP_S		13
+#define MC44S803_CLRF		0x80000
+#define MC44S803_CLRF_S		19
+#define MC44S803_CLIF		0x100000
+#define MC44S803_CLIF_S		20
+/* REG_TEST */
+/* REG_DIGTUNE */
+#define MC44S803_DA		0xF0
+#define MC44S803_DA_S		4
+#define MC44S803_XOD		0x300
+#define MC44S803_XOD_S		8
+#define MC44S803_RST		0x10000
+#define MC44S803_RST_S		16
+#define MC44S803_LO_REF		0x1FFF00
+#define MC44S803_LO_REF_S	8
+#define MC44S803_AT		0x200000
+#define MC44S803_AT_S		21
+#define MC44S803_MT		0x400000
+#define MC44S803_MT_S		22
+/* REG_LNAAGC */
+#define MC44S803_G		0x3F0
+#define MC44S803_G_S		4
+#define MC44S803_AT1		0x400
+#define MC44S803_AT1_S		10
+#define MC44S803_AT2		0x800
+#define MC44S803_AT2_S		11
+#define MC44S803_HL_GR_EN	0x8000
+#define MC44S803_HL_GR_EN_S	15
+#define MC44S803_AGC_AN_DIG	0x10000
+#define MC44S803_AGC_AN_DIG_S	16
+#define MC44S803_ATTEN_EN	0x20000
+#define MC44S803_ATTEN_EN_S	17
+#define MC44S803_AGC_READ_EN	0x40000
+#define MC44S803_AGC_READ_EN_S	18
+#define MC44S803_LNA0		0x80000
+#define MC44S803_LNA0_S		19
+#define MC44S803_AGC_SEL	0x100000
+#define MC44S803_AGC_SEL_S	20
+#define MC44S803_AT0		0x200000
+#define MC44S803_AT0_S		21
+#define MC44S803_B		0xC00000
+#define MC44S803_B_S		22
+/* REG_DATAREG */
+#define MC44S803_D		0xF0
+#define MC44S803_D_S		4
+/* REG_REGTEST */
+/* REG_VCOTEST */
+/* REG_LNAGAIN */
+#define MC44S803_IF_PWR		0x700
+#define MC44S803_IF_PWR_S	8
+#define MC44S803_RF_PWR		0x3800
+#define MC44S803_RF_PWR_S	11
+#define MC44S803_LNA_GAIN	0xFC000
+#define MC44S803_LNA_GAIN_S	14
+/* REG_ID */
+#define MC44S803_ID		0x3E00
+#define MC44S803_ID_S		9
+
+/* Some macros to read/write fields */
+
+/* First shift, then mask */
+#define MC44S803_REG_SM(_val, _reg)					\
+	(((_val) << _reg##_S) & (_reg))
+
+/* First mask, then shift */
+#define MC44S803_REG_MS(_val, _reg)					\
+	(((_val) & (_reg)) >> _reg##_S)
+
+struct mc44s803_priv {
+	struct mc44s803_config *cfg;
+	struct i2c_adapter *i2c;
+	struct dvb_frontend *fe;
+
+	u32 frequency;
+};
+
+#endif