Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 281 insertions, 0 deletions

diff --git a/drivers/media/tuners/mt2131.c b/drivers/media/tuners/mt2131.c
new file mode 100644
index 000000000..37f50ff6c
--- /dev/null
+++ b/drivers/media/tuners/mt2131.c
@@ -0,0 +1,281 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
+ *
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/dvb/frontend.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+
+#include <media/dvb_frontend.h>
+
+#include "mt2131.h"
+#include "mt2131_priv.h"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
+
+#define dprintk(level,fmt, arg...) if (debug >= level) \
+	printk(KERN_INFO "%s: " fmt, "mt2131", ## arg)
+
+static u8 mt2131_config1[] = {
+	0x01,
+	0x50, 0x00, 0x50, 0x80, 0x00, 0x49, 0xfa, 0x88,
+	0x08, 0x77, 0x41, 0x04, 0x00, 0x00, 0x00, 0x32,
+	0x7f, 0xda, 0x4c, 0x00, 0x10, 0xaa, 0x78, 0x80,
+	0xff, 0x68, 0xa0, 0xff, 0xdd, 0x00, 0x00
+};
+
+static u8 mt2131_config2[] = {
+	0x10,
+	0x7f, 0xc8, 0x0a, 0x5f, 0x00, 0x04
+};
+
+static int mt2131_readreg(struct mt2131_priv *priv, u8 reg, u8 *val)
+{
+	struct i2c_msg msg[2] = {
+		{ .addr = priv->cfg->i2c_address, .flags = 0,
+		  .buf = &reg, .len = 1 },
+		{ .addr = priv->cfg->i2c_address, .flags = I2C_M_RD,
+		  .buf = val,  .len = 1 },
+	};
+
+	if (i2c_transfer(priv->i2c, msg, 2) != 2) {
+		printk(KERN_WARNING "mt2131 I2C read failed\n");
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static int mt2131_writereg(struct mt2131_priv *priv, u8 reg, u8 val)
+{
+	u8 buf[2] = { reg, val };
+	struct i2c_msg msg = { .addr = priv->cfg->i2c_address, .flags = 0,
+			       .buf = buf, .len = 2 };
+
+	if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
+		printk(KERN_WARNING "mt2131 I2C write failed\n");
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static int mt2131_writeregs(struct mt2131_priv *priv,u8 *buf, u8 len)
+{
+	struct i2c_msg msg = { .addr = priv->cfg->i2c_address,
+			       .flags = 0, .buf = buf, .len = len };
+
+	if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
+		printk(KERN_WARNING "mt2131 I2C write failed (len=%i)\n",
+		       (int)len);
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static int mt2131_set_params(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	struct mt2131_priv *priv;
+	int ret=0, i;
+	u32 freq;
+	u8  if_band_center;
+	u32 f_lo1, f_lo2;
+	u32 div1, num1, div2, num2;
+	u8  b[8];
+	u8 lockval = 0;
+
+	priv = fe->tuner_priv;
+
+	freq = c->frequency / 1000;  /* Hz -> kHz */
+	dprintk(1, "%s() freq=%d\n", __func__, freq);
+
+	f_lo1 = freq + MT2131_IF1 * 1000;
+	f_lo1 = (f_lo1 / 250) * 250;
+	f_lo2 = f_lo1 - freq - MT2131_IF2;
+
+	priv->frequency =  (f_lo1 - f_lo2 - MT2131_IF2) * 1000;
+
+	/* Frequency LO1 = 16MHz * (DIV1 + NUM1/8192 ) */
+	num1 = f_lo1 * 64 / (MT2131_FREF / 128);
+	div1 = num1 / 8192;
+	num1 &= 0x1fff;
+
+	/* Frequency LO2 = 16MHz * (DIV2 + NUM2/8192 ) */
+	num2 = f_lo2 * 64 / (MT2131_FREF / 128);
+	div2 = num2 / 8192;
+	num2 &= 0x1fff;
+
+	if (freq <=   82500) if_band_center = 0x00; else
+	if (freq <=  137500) if_band_center = 0x01; else
+	if (freq <=  192500) if_band_center = 0x02; else
+	if (freq <=  247500) if_band_center = 0x03; else
+	if (freq <=  302500) if_band_center = 0x04; else
+	if (freq <=  357500) if_band_center = 0x05; else
+	if (freq <=  412500) if_band_center = 0x06; else
+	if (freq <=  467500) if_band_center = 0x07; else
+	if (freq <=  522500) if_band_center = 0x08; else
+	if (freq <=  577500) if_band_center = 0x09; else
+	if (freq <=  632500) if_band_center = 0x0A; else
+	if (freq <=  687500) if_band_center = 0x0B; else
+	if (freq <=  742500) if_band_center = 0x0C; else
+	if (freq <=  797500) if_band_center = 0x0D; else
+	if (freq <=  852500) if_band_center = 0x0E; else
+	if (freq <=  907500) if_band_center = 0x0F; else
+	if (freq <=  962500) if_band_center = 0x10; else
+	if (freq <= 1017500) if_band_center = 0x11; else
+	if (freq <= 1072500) if_band_center = 0x12; else if_band_center = 0x13;
+
+	b[0] = 1;
+	b[1] = (num1 >> 5) & 0xFF;
+	b[2] = (num1 & 0x1F);
+	b[3] = div1;
+	b[4] = (num2 >> 5) & 0xFF;
+	b[5] = num2 & 0x1F;
+	b[6] = div2;
+
+	dprintk(1, "IF1: %dMHz IF2: %dMHz\n", MT2131_IF1, MT2131_IF2);
+	dprintk(1, "PLL freq=%dkHz  band=%d\n", (int)freq, (int)if_band_center);
+	dprintk(1, "PLL f_lo1=%dkHz  f_lo2=%dkHz\n", (int)f_lo1, (int)f_lo2);
+	dprintk(1, "PLL div1=%d  num1=%d  div2=%d  num2=%d\n",
+		(int)div1, (int)num1, (int)div2, (int)num2);
+	dprintk(1, "PLL [1..6]: %2x %2x %2x %2x %2x %2x\n",
+		(int)b[1], (int)b[2], (int)b[3], (int)b[4], (int)b[5],
+		(int)b[6]);
+
+	ret = mt2131_writeregs(priv,b,7);
+	if (ret < 0)
+		return ret;
+
+	mt2131_writereg(priv, 0x0b, if_band_center);
+
+	/* Wait for lock */
+	i = 0;
+	do {
+		mt2131_readreg(priv, 0x08, &lockval);
+		if ((lockval & 0x88) == 0x88)
+			break;
+		msleep(4);
+		i++;
+	} while (i < 10);
+
+	return ret;
+}
+
+static int mt2131_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+	struct mt2131_priv *priv = fe->tuner_priv;
+	dprintk(1, "%s()\n", __func__);
+	*frequency = priv->frequency;
+	return 0;
+}
+
+static int mt2131_get_status(struct dvb_frontend *fe, u32 *status)
+{
+	struct mt2131_priv *priv = fe->tuner_priv;
+	u8 lock_status = 0;
+	u8 afc_status = 0;
+
+	*status = 0;
+
+	mt2131_readreg(priv, 0x08, &lock_status);
+	if ((lock_status & 0x88) == 0x88)
+		*status = TUNER_STATUS_LOCKED;
+
+	mt2131_readreg(priv, 0x09, &afc_status);
+	dprintk(1, "%s() - LO Status = 0x%x, AFC Status = 0x%x\n",
+		__func__, lock_status, afc_status);
+
+	return 0;
+}
+
+static int mt2131_init(struct dvb_frontend *fe)
+{
+	struct mt2131_priv *priv = fe->tuner_priv;
+	int ret;
+	dprintk(1, "%s()\n", __func__);
+
+	if ((ret = mt2131_writeregs(priv, mt2131_config1,
+				    sizeof(mt2131_config1))) < 0)
+		return ret;
+
+	mt2131_writereg(priv, 0x0b, 0x09);
+	mt2131_writereg(priv, 0x15, 0x47);
+	mt2131_writereg(priv, 0x07, 0xf2);
+	mt2131_writereg(priv, 0x0b, 0x01);
+
+	if ((ret = mt2131_writeregs(priv, mt2131_config2,
+				    sizeof(mt2131_config2))) < 0)
+		return ret;
+
+	return ret;
+}
+
+static void mt2131_release(struct dvb_frontend *fe)
+{
+	dprintk(1, "%s()\n", __func__);
+	kfree(fe->tuner_priv);
+	fe->tuner_priv = NULL;
+}
+
+static const struct dvb_tuner_ops mt2131_tuner_ops = {
+	.info = {
+		.name              = "Microtune MT2131",
+		.frequency_min_hz  =  48 * MHz,
+		.frequency_max_hz  = 860 * MHz,
+		.frequency_step_hz =  50 * kHz,
+	},
+
+	.release       = mt2131_release,
+	.init          = mt2131_init,
+
+	.set_params    = mt2131_set_params,
+	.get_frequency = mt2131_get_frequency,
+	.get_status    = mt2131_get_status
+};
+
+struct dvb_frontend * mt2131_attach(struct dvb_frontend *fe,
+				    struct i2c_adapter *i2c,
+				    struct mt2131_config *cfg, u16 if1)
+{
+	struct mt2131_priv *priv = NULL;
+	u8 id = 0;
+
+	dprintk(1, "%s()\n", __func__);
+
+	priv = kzalloc(sizeof(struct mt2131_priv), GFP_KERNEL);
+	if (priv == NULL)
+		return NULL;
+
+	priv->cfg = cfg;
+	priv->i2c = i2c;
+
+	if (mt2131_readreg(priv, 0, &id) != 0) {
+		kfree(priv);
+		return NULL;
+	}
+	if ( (id != 0x3E) && (id != 0x3F) ) {
+		printk(KERN_ERR "MT2131: Device not found at addr 0x%02x\n",
+		       cfg->i2c_address);
+		kfree(priv);
+		return NULL;
+	}
+
+	printk(KERN_INFO "MT2131: successfully identified at address 0x%02x\n",
+	       cfg->i2c_address);
+	memcpy(&fe->ops.tuner_ops, &mt2131_tuner_ops,
+	       sizeof(struct dvb_tuner_ops));
+
+	fe->tuner_priv = priv;
+	return fe;
+}
+EXPORT_SYMBOL(mt2131_attach);
+
+MODULE_AUTHOR("Steven Toth");
+MODULE_DESCRIPTION("Microtune MT2131 silicon tuner driver");
+MODULE_LICENSE("GPL");